检索结果-内蒙古大学图书馆

Hot compressive deformation of eutectic Al-17at%Cu alloy on the interface of the Cu-Al composite plate produced by horizontal continuous casting

引用

International Journal of Minerals,Metallurgy and materials 2022年第8期29卷 1578-1588页

作者： Jun Wang Fan Zhao Guoliang Xie Jiaxuan Xu Xinhua Liu Key Laboratory for Advanced Materials Processing(MOE) Institute for Advanced Materials and TechnologyUniversity of Science and Technology BeijingBeijing 100083China State Key Laboratory for Advanced Metals and Materials University of Science and Technology BeijingBeijing 100083China

On the interface of the Cu-Al composite plate from horizontal continuous casting,the eutectic microstructure layer thickness ac-counts for more than 90%of the total interface thickness,and the deformation in rolling forming plays an important role in the quality of the composite *** eutectic microstructure material on the interface of the Cu-Al composite plate was prepared by changing the cooling rate of ingot solidification and the deformation in hot compression was *** results show that when the deformation temperature is over 300℃,the softening effect of dynamic recrystallization ofα-Al is greater than the hardening effect,and uniform plastic deformation of eutectic microstructure is *** constitutive equation of flow stress in the eutectic microstructure layer was established by Arrhenius hy-perbolic-sine mathematics model,providing a reliable theoretical basis for the deformation of the Cu-Al composite plate.

关键词： horizontal continuous casting copper-aluminium composite plate composite interface eutectic microstructure material hot de-formation experiments constitutive equation

来源：评论

学校读者我要写书评

暂无评论

Sulfate-assisted Ni/Fe-based electrodes for anion exchange membrane saline splitting

引用

Nano Research 2024年第7期17卷 5985-5995页

作者： Yujun Han Li Shao Yuhang Liu Guodong Li Tongzhou Wang Xuerong Zheng Jihong Li Xiaopeng Han Wenbin Hu Yida Deng School of Materials Science and Engineering Key Laboratory of Advanced Ceramics and Machining Technology of Ministry of EducationTianjin UniversityTianjin 300072China State Key Laboratory of Marine Resource Utilization in South China Sea School of Materials Science and EngineeringHainan UniversityHaikou 570228China State Key Laboratory of Inorganic Synthesis and Preparative Chemistry College of ChemistryJilin UniversityChangchun 130012China Key Laboratory of Advanced Energy Materials Chemistry(Ministry of Education) Nankai UniversityTianjin 300071China

Saline water electrolysis is an appealing strategy for hydrogen production,attracting more attention in recent ***-based electrodes exhibit promise as catalysts for saline water ***,they suffer from the inferior service life of the oxygen evolution reaction(OER).Herein,we report an oxygen-evolution electrode consisting of a sulfate-modulated nickel-iron hydroxide(NiFeOOH)affording as the catalytic active layer and Fe-Ni_(3)S_(2) as the corrosion-proof *** developed electrode only requires overpotentials of 220 and 292 mV to deliver the current density of 10 and 500 mA·cm^(−2),*** importantly,it presents long-term stability exceeding 140 and 100 h in 1 M KOH at high current densities of 500 and 1000 mA·cm^(−2),respectively,as well as 120 h for saline water electrolysis at 100 mA·cm^(−2).Experimental results reveal that the generated sulfate plays an indispensable role in improving stability and corrosion *** assembled and tested an anion exchange membrane electrolyzer with Pt/C and NiFeS/NIF as the cathode and anode,respectively,under industrial *** overall water-splitting electrolyzer achieves an impressive energy conversion efficiency of 75%±0.5%.This report offers fresh insights into the design of stable NiFe-based electrodes,which may further promote its practical applications for saline water electrolysis.

关键词： saline water electrolysis oxygen evolution reaction anode material water splitting

来源：评论

学校读者我要写书评

暂无评论

Selenium-doped cathode materials with polyaniline skeleton for lithium-organosulfur batteries

引用

Journal of Energy Chemistry 2023年第4期79卷 148-157页

作者： Rong Zou Wenwu Liu Fen Ran State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals School of Materials Science and EngineeringLanzhou University of TechnologyLanzhou 730050GansuChina

Sulfur-containing polymer(SCP)is considered as an outstanding cathode material for lithium-sulfur ***,undesirable soluble polysulfides may shuttle in electrolyte,concluding long-chain Li_(2)S_(n)(n>4)and short-chain Li2Sn(n≤4),as well as the sluggish conversion kinetics are yet to be solved to enhance the performance of lithium-sulfur *** Se-doped sulfurized polyaniline with adjusted sulfur-chain-S_(x)-(x≤6)contribute to ensure the absence of long-chain polysulfides,and the skeleton with quinoid imine can endow strongly adsorption towards short-chain polysulfides by the reversible transition between deprotonated/protonated imine(-NH^(+)=and-N=),which offer double insurance against suppressing“shuttle effect”.Furthermore,Se atoms are doped into sulfurized polysulfides to accelerate the redox conversion and take a frontier orbital theory-oriented view into catalytic ***-doped sulfurized polyaniline as active materials for lithium-organosulfur batteries delivers good electrochemical performance,including high rate,reversible specific capacity(680 mA h g^(-1)at 0.1 A g^(-1)),and lower capacity decay rate only of 0.15%with near 100%coulomb efficiency during long-term *** work provides a valuable guiding ideology and promising solution for the chemistry-oriented structure design and practical application for lithium-organosulfur batteries.

关键词： Lithium-organosulfur batteries Selenium-doped Cathode materials Sulfur-containing polymer Frontier orbital theory

来源：评论

学校读者我要写书评

暂无评论

Bioprocess-inspired Actin Biomineralized Hematite Mesocrystals for Energy Storage

引用

Journal of Wuhan University of technology(materials Science) 2023年第6期38卷 1299-1303页

作者： XU Wei ZHAO Chao XIE Jingjing WANG Rongjie Tianjin Institute of Power Sources Tianjin 300384China CETC LAN TIAN Technology Co. Ltd.Tianjin 300384China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

Biomineralization is a biological process of synthesizing inorganic minerals within *** has been found that intracellular proteins are involved in the room temperature synthesis process of anatase Ti O2in living ***,we used intracellular actin to synthesize hematite by *** hematite has a nano spindle structure with a particle size of approximately 150 *** microstructure indicates that the prepared hematite is a mesocrystals composed of ordered arrangement and assembly of primary *** addition,hematite mesocrystals exhibit good lithium storage performance as electrode materials for lithium *** discharge specific capacity of the battery remained at 560.7 m Ah·g^(-1)after 130 cycles at a current density of 200 m A·g^(-1).This work expands the synthesis methods of hematite by biomineralization,and provides a new strategy for preparing inorganic materials by intracellular proteins.

关键词： actin hematite biomineralization mesocrystals lithium battery

来源：评论

学校读者我要写书评

暂无评论

Directly Unveiling the Photothermal Corrosion of BiVO4 via In-situ Transmission Electron Microscopy

引用

Chemical Research in Chinese Universities 2025年第2期41卷 351-357页

作者： WANG Lindong SUN Jingyi WANG Lang LI Yu HU Zhiyi SU Baolian State Key Laboratory of Advanced Technology for Materials Synthesis and Processing International School of Materials Science and Engineering(ISME)Wuhan University of TechnologyWuhan 430070P.R.China Nanostructure Research Centre(NRC) Wuhan University of TechnologyWuhan 430070P.R.China CMI(Laboratory of Inorganic Materials Chemistry) University of Namurrue deBruxelles 61B-5000NamurBelgium

BiVO4(BVO)is widely utilized in photothermal catalysis because of its favorable bandgap structure(2.4 eV),excellent photo response capabilities and high thermal ***,the mechanism of BVO photothermal corrosion still remains unclear due to the lack of visualized characterization on the degradation process in real ***,we directly unveil the photothermal-induced microstructural evolution of BVO through in-situ heating(scanning)transmission electron microscopy[(S)TEM].The results indicate that the electrons are the initiating condition(“switch”)for the photothermal corrosion of BVO,resulting in the precipitation of Bi and reduction of V5+to V3+in the substrate,while the thermal field facilitates the evaporation of Bi and the recrystallization of *** work sheds light on the mechanism of BVO photothermal corrosion in dynamics and provides significant insights into the photothermal synergistic effects.

关键词： BiVO4 Photothermal corrosion In-situ transmission electron microscopy(TEM) Photothermal catalysis Structural evolution

来源：评论

学校读者我要写书评

暂无评论

Structural Evolution of Graphene Oxide and Its Thermal Stability During High Temperature Sintering

引用

Journal of Wuhan University of technology(materials Science) 2022年第3期37卷 342-349页

作者： HU Lanxin WANG Aiyang WANG Weimin School of Materials Science and Engineering Wuhan University of TechnologyWuhan 430070China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

The thermal reduction of graphene oxide(GO)was performed by a tube furnace at different temperatures,and its structure evolution was investigated in *** results showed that the oxygen-containing functional groups on the carbon plane surface of GO gradually decomposed as the temperature increase,and the reduced graphene oxide(rGO)powder was obtained at 800℃.Then,rGO powder was sintered under 30 MPa at 1800℃using spark plasma sintering(SPS)and hot-pressing(HP)to evaluate its structural stability at high *** defect densities of rGO were reduced after high-temperature *** edge flatness and sp^(2) hybrid carbon plane structure were reconstructed *** results demonstrate that the lamellar structure of rGO maintains the structural integrity during high-temperature sintering without obvious deterioration,which provides experimental and theoretical supports for GO reinforced ceramics.

关键词： graphene oxide ceramics structure evolution thermal stability sintering

来源：评论

学校读者我要写书评

暂无评论

Nonflammable electrolyte with weak-solvation structure for stable NCM811 cathode under high temperature

引用

Journal of Energy Chemistry 2025年第5期104卷 111-117页

作者： Dawei Xu Chao Yang Ailing Yang Xiaowei Liu Meilong Wang Jin Han Tiefeng Liu Ya You State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070HubeiChina International School of Materials Science and Engineering School of Materials Science and MicroelectronicsWuhan University of TechnologyWuhan 430070HubeiChina College of Chemical and Biological Engineering Zhejiang UniversityHangzhou 310058ZhejiangChina Quzhou Institute of Power Battery and Grid Energy Storage Quzhou 324000ZhejiangChina

High-nickel cathode LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)could enable lithium-ion batteries(LIBs)with high energy ***,excessive decomposition of the electrolyte would happen in the high operating voltage *** addition,the utilization of flammable organic solvents would increase safety risks in the high temperature ***,an electrolyte consisting of flame-retardant solvents with lower highest occupied molecular orbital(HOMO)level and LiDFOB salt is proposed to address above two *** a result,a thin and robust cathode-electrolyte interface containing rich LiF and Li-B-O compounds is formed on the cathode to effectively suppress electrolyte decomposition in the high operating *** NCM811||Li cell paired with this designed electrolyte possesses a capacity retention of 72%after 300 cycles at 55℃.This work provides insights into developing electrolyte for stable high-nickel cathode operated in the high temperature.

关键词： Electrolyte engineering Weak solvation High temperature Safety High-nickel cathode

来源：评论

学校读者我要写书评

暂无评论

Surface repair of wide-bandgap perovskites for high-performance all-perovskite tandem solar cells

引用

Journal of Energy Chemistry 2024年第6期93卷 64-70,I0003页

作者： Xiaojing Lv Weisheng Li Jin Zhang Yujie Yang Xuefei Jia Yitong Ji Qianqian Lin Wenchao Huang Tongle Bu Zhiwei Ren Canglang Yao Fuzhi Huang Yi-Bing Cheng Jinhui Tong State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070HubeiChina Key Lab of Artificial Micro-and Nano-Structures of Ministry of Education of China School of Physics and TechnologyWuhan UniversityWuhan 430072HubeiChina Department of Electrical and Electronic Engineering Photonics Research Institute(PRI)Research Institute for Intelligent Wearable Systems(iWEAR)The Hong Kong Polytechnic University999077Hong KongChina Laboratory of Advanced Materials Fudan UniversityShanghai 200438China Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory Foshan 528200GuangdongChina

Wide-bandgap(WBG)perovskite solar cells(PSCs)play a fundamental role in perovskite-based tandem solar ***,the efficiency of WBG PSCs is limited by significant open-circuit voltage losses,which are primarily caused by surface *** this study,we present a novel method for modifying surfaces using the multifunctional S-ethylisothiourea hydrobromide(SEBr),which can passivate both Pb^(-1)and FA^(-1)terminated surfaces,Moreover,the SEBr upshifted the Fermi level at the perovskite interface,thereby promoting carrier *** proposed method was effective for both 1.67 and 1.77 eV WBG PSCs,achieving power conversion efficiencies(PCEs)of 22.47%and 19.90%,respectively,with V_(OC)values of 1.28 and 1.33 V,along with improved film and device *** this advancement,we were able to fabricate monolithic all-perovskite tandem solar cells with a champion PCE of 27.10%,This research offers valuable insights for passivating the surface trap states of WBG perovskite through rational multifunctional molecular engineering.

关键词： Wide-bandgap perovskite Surface defect Multifunctional molecule All-perovskite tandem solar cells

来源：评论

学校读者我要写书评

暂无评论

Highly Efficient Broadband Achromatic Microlens Design Based on Low-Dispersion materials

引用

Engineering 2024年第7期38卷 194-200页

作者： Xueqian Wang Chuanbao Liu Feilou Wang Weijia Luo Chengdong Tao Yuxuan Hou Lijie Qiao Ji Zhou Jingbo Sun Yang Bai Beijing Advanced Innovation Center for Materials Genome Engineering Institute for Advanced Materials and TechnologyUniversity of Science and Technology BeijingBeijing 100083China School of Materials and Engineering University of Science and Technology BeijingBeijing 100083China State Key Laboratory of New Ceramics and Fine Processing School of Materials Science and EngineeringTsinghua UniversityBeijing 100084China

Metalenses with achromatic performance offer a new opportunity for high-quality imaging with an ultracompact configuration;however,they suffer from complex fabrication processes and low focusing *** this study,we propose an efficient design method for achromatic microlenses on a wavelength scale using materials with low dispersion,an adequately designed convex surface,and a thickness profile *** taking into account the absolute chromatic aberration,relative focal length shift(FLS),and numerical aperture(NA),microlens with a certain focal length can be realized through our realized map of geometric ***,the designed achromatic microlenses with low-dispersion fused silica were fabricated using a focused ion beam,and precise surface profiles were *** fabricated microlenses exhibited a high average focusing efficiency of 65%at visible wavelengths of 410-680 nm and excellent achromatic capability via white light ***,the design exhibited the advantages of being polarization-insensitive and *** results demonstrate the effectiveness of our proposed achromatic microlens design approach,which expands the prospects of miniaturized optics such as virtual and augmented reality,ultracompact microscopes,and biological endoscopy.

关键词： Broadband achromatic focusing Metamaterials Low dispersion materials Visible wavelength Microlenses

来源：评论

学校读者我要写书评

暂无评论

Ultra-bright near-infrared-IIb emitting Zn-doped Ag_(2)Te quantum dots for noninvasive monitoring of traumatic brain injury

引用

Nano Research 2023年第2期16卷 2719-2727页

作者： Yifei Zhou Biao Huang Shi-Hui Chen Shu-Lin Liu Mingxi Zhang Ran Cui College of Chemistry and Molecular Sciences Wuhan UniversityWuhan 430072China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China State Key Laboratory of Medicinal Chemical Biology Tianjin Key Laboratory of Biosensing and Molecular RecognitionResearch Centre for Analytical SciencesCollege of ChemistryNankai UniversityTianjin 300071China

The long-wavelength region of the near-infrared-IIb(NIR-IIb,1,500–1,700 nm)imaging window has become an ideal window for in vivo imaging due to the suppressed photon scattering and near-zero autofluorescence of biological ***,it is necessary to develop fluorescent probes with excellent fluorescence performance and stability for NIR-IIb fluorescence *** this work,zinc-doped silver telluride quantum dots(Zn:Ag_(2)Te QDs)with bright fluorescence in the NIR-IIb window were *** introduction of Zn dopants inhibited crystal defects and reduced non-radiative ***,the quantum yield and fluorescence lifetime of Zn:Ag_(2)Te QDs were significantly *** addition,Zn-doping increased the number of ligands on the surface of QDs,thus enhancing the colloidal stability of Zn:Ag_(2)Te ***,the PEGylated Zn:Ag_(2)Te QDs with high absolute quantum yield realized noninvasive imaging of cerebral vascular of mouse with high resolution able to distinguish blood capillary,which could be utilized to monitor the brain condition of mice after traumatic brain injury.

关键词： near-infrared-IIb(NIR-IIb)window silver telluride quantum dots fluorescence in vivo imaging

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：