检索结果-内蒙古大学图书馆

Enhanced reversible hydrogen storage properties of wrinkled graphene microflowers confined LiBH_(4) system with high volumetric hydrogen storage capacity

引用

materials Reports(Energy) 2024年第1期4卷 79-88页

作者： Zhenglong Li Kaicheng Xian Hao Chen Mingxia Gao Shanqing Qu Meihong Wu Yaxiong Yang Wenping Sun Chao Gao Yongfeng Liu Xin Zhang Hongge Pan Institute of Science and Technology for New Energy Xi'an Technological UniversityXi'an710021PR China State Key Laboratory of Silicon and Advanced Semiconductor Materials Key Laboratory of Advanced Materials and Applications for Batteries of Zhejiang ProvinceSchool of Materials Science and EngineeringZhejiang UniversityHangzhou310027PR China Department of Polymer Science and Engineering MOE Key Laboratory of Macromolecular Synthesis and FunctionalizationZhejiang UniversityHangzhou310027PR China

LiBH_(4)with high hydrogen storage density,is regarded as one of the most promising hydrogen storage ***,it suffers from high dehydrogenation temperature and poor reversibility for practical *** is effective in achieving low dehydrogenation temperature and favorable ***,graphene can serve as supporting materials for LiBH_(4)catalysts and also destabilize LiBH_(4)via interfacial ***,graphene has never been used alone as a frame material for nanoconfining LiBH_(4).In this study,graphene microflowers with large pore volumes were prepared and used as nanoconfinement framework material for LiBH_(4),and the nanoconfinement effect of graphene was *** loading 70 wt%of LiBH_(4) and mechanically compressed at 350 MPa,8.0 wt% of H2 can be released within 100 min at 320C,corresponding to the highest volumetric hydrogen storage density of 94.9 g H2 L^(-1)ever *** to the nanoconfinement of graphene,the rate-limiting step of dehydrogenation of nanoconfined LiBH_(4) was changed and its apparent activation energy of the dehydrogenation(107.3 kJ mol^(-1))was 42%lower than that of pure LiBH_(4).Moreover,the formation of the intermediate Li_(2)B_(12)H_(12) was effectively inhibited,and the stable nanoconfined structure enhanced the reversibility of LiBH_(4).This work widens the understanding of graphene's nanoconfinement effect and provides new insights for developing high-density hydrogen storage materials.

关键词： Hydrogen storage LiBH_(4) Nanoconfinement Graphene High capacity

来源：评论

学校读者我要写书评

暂无评论

Dual occupations of sulfur induced band flattening and chemical bond softening in p-type S_(y)Co_(4)Sb_(12-2y)S_(2y) skutterudites

引用

Journal of Materiomics 2022年第1期8卷 88-95页

作者： Jialiang Li Xiaolian Zhang Haoqin Ma Bo Duan Guodong Li Jiong Yang Hongtao Wang Houjiang Yang Ling Zhou Pengcheng Zhai Hubei Key Laboratory of Theory and Application of Advanced Materials Mechanics Wuhan University of TechnologyWuhan430070China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan430070China Materials Genome Institute Shanghai University99 Shangda RoadShanghai200444China

The electronegative filling in skutterudites not only broadened the scope of filling atoms,but also facilitated the preparation of p-type ***,the introduction of a single sulfur atom in the Co_(4)Sb_(12) cannot be achieved without charge compensation through the traditional equilibrium *** the present study,the dual occupations of S-atoms by self-charge compensation were shown as the most stable forms under high pressure,and a series of p-type S_(y)Co_(4)Sb_(12-2y)S_(2y) skutterudites was successfully prepared by high-pressure-high-temperature(HPHT)*** electronic structures and transport properties of as-obtained materials were investigated,and the related mechanisms were *** results suggested that the presence of S-impurities led to flattening of the electronic band that led to a higher Seebeck *** S-doped Co_(4)Sb_(12) displayed lower elastic modulus,elastic constant,and Debye temperature,thus indicating the chemical bond softening in *** thermal conductivities of S_(y)Co_(4)Sb_(12-2y)S_(2y) compounds reduced monotonously with the increase in *** study provides a new and promising avenue for optimizing the thermoelectric properties of p-type Co_(4)Sb_(12).

关键词： Electronegative filling skutterudites Self-charge compensation Band flattening Bond softening

来源：评论

学校读者我要写书评

暂无评论

Plasma-assisted fabrication of multiscale materials for electrochemical energy conversion and storage

引用

Carbon Energy 2025年第2期7卷 144-171页

作者： Chen Li Tengfei Zhang Zhong Qiu Beirong Ye Xinqi Liang Xin Liu Minghua Chen Xinhui Xia Chen Wang Wangjun Wan Yongqi Zhang Institute of Fundamental and Frontier Sciences University of Electronic Science and Technology of ChinaChengduChina Key Laboratory of Engineering Dielectric and Applications(Ministry of Education) School of Electrical and Electronic EngineeringHarbin University of Science and TechnologyHarbinChina State Key Laboratory of New Textile Materials and Advanced Processing Technology Wuhan Textile UniversityWuhanChina College of Materials Science and Engineering Zhejiang University of TechnologyHangzhouChina School of Materials Science and Engineering Zhejiang UniversityHangzhouChina Zhejiang Academy of Science and Technology for Inspection and Quarantine HangzhouChina

Plasma,the fourth state of matter,is characterized by the presence of charged particles,including ions and *** has been shown to induce unique physical and chemical ***,there have been increased applications of plasma technology in the field of multiscale functional materials'preparation,with a number of interesting *** review will begin by introducing the basic knowledge of plasma,including the definition,typical parameters,and classification of plasma *** this,we will provide a comprehensive review and summary of the applications(phase conversion,doping,deposition,etching,exfoliation,and surface treatment)of plasma in common energy conversion and storage systems,such as electrocatalytic conversion of small molecules,batteries,fuel cells,and *** article summarizes the structure-performance relationships of electrochemical energy conversion and storage materials(ECSMs)that have been prepared or modified by *** also provides an overview of the challenges and perspectives of plasma technology,which could lead to a new approach for designing and modifying electrode materials in ECSMs.

关键词： electrocatalysts energy conversion and storage nanomaterials plasma

来源：评论

学校读者我要写书评

暂无评论

Application of in-situ characterization techniques in modern aqueous batteries

引用

Rare Metals 2024年第8期43卷 3553-3575页

作者： Jia-Hao Wu Hong-Wei Cai Zhao-Hui Deng Jean-Jacques Gaumet Yu Bao Wen Luo Department of Physics State Key Laboratory of Advanced Technology for Materials Synthesis and ProcessingSchool of Materials Science and EngineeringWuhan University of TechnologyWuhan430070China Laboratoire de Chimie Et Physique:Approche Multi-Echelles Des Milieux Complexes(LCP-A2MC)Institut Jean BarriolUniversitéde Lorraine57070MetzFrance Department of Medicinal Chemistry Hubei College of Chinese MedicineJingzhou 434020China

The development of high-performance aqueous batteries calls for an in-depth knowledge of their chargedischarge redox and failure mechanism,as well as a systematic understanding of the dynamic evolution of microstructure,phase composition,chemical composition,and local chemical environment of the materials for ***-situ characterization technology is expected to understand and reveal the problems faced by aqueous rechargeable batteries,such as the dissolution of electrode materials,the growth of metal negative electrode dendrites,passivation,corrosion,side reactions and a series of *** on this,typical in-situ characterization techniques and their basic mechanisms are summarized,including in-situ optical visualization,in-situ microscopy techniques(in-situ scanning electron microscopy(SEM),in-situ transmission electron microscopy(TEM)),in-situ X-ray techniques(in-situ X-ray diffraction(XRD),in-situ X-ray photoelectron spectroscopy(XPS),in-situ near-edge structural X-ray absorption spectroscopy(XANES)),and in-situ spectroscopy techniques(in-situ Raman spectroscopy,in-situ Fourier transform infrared(FTIR)).Moreover,some emerging techniques concerning aqueous battery research,especially gas evolution and materials dissolution issues,such as in-situ electrochemical quartz crystal microbalance(EQCM).in-situ fiber-optic sensing,in-situ gas chromatography(GC) are *** last,the applications of advanced in-situ characterizations in future research of aqueous batteries are emphasized and discussed,along with some of the remaining challenges and possible solutions.

关键词： Aqueous battery In-situ characterization Phase transformation Solid electrolyte interphase Zinc dendrite growth

来源：评论

学校读者我要写书评

暂无评论

Three-dimensional ordered hierarchically porous carbon materials for high performance Li-Se battery

引用

Journal of Energy Chemistry 2022年第5期31卷 624-636页

作者： Hongyan Li Wenda Dong Chao Li Tarek Barakat Minghui Sun Yingying Wang Liang Wu Lang Wang Lei Xia Zhi-Yi Hu Yu Li Bao-Lian Su Laboratory of Inorganic Materials Chemistry(CMI) University of NamurB-5000 NamurBelgium Namur Institute of Structured Matter(NISM) University of NamurB-5000 NamurBelgium State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430074HubeiChina

Developing host materials with high specific surface area, good electron conductivity, and fast ion transportation channel is critical for high performance lithium-selenium(Li-Se) batteries. Herein, a series of three dimensional ordered hierarchically porous carbon(3D OHPC) materials with micro/meso/macropores are designed and synthesized for Li-Se battery. The porous structure is tuned by following the concept of the generalized Murray’s law to facilitate the mass diffusion and reduce ion transport *** optimized 3D Se/OHPC cathode exhibits a very high 2 nd discharge capacity of 651 m Ah/g and retains 361 m Ah/g after 200 cycles at 0.2 C. Even at a high current rate of 5 C, the battery still shows a discharge capacity as high as 155 m Ah/g. The improved electrochemical performance is attributed to the synergy effect of the interconnected and well-designed micro, meso and macroporosity while shortened ions diffusion pathways of such Murray materials accelerate its ionic and electronic conductivities leading to the enhanced electrochemical reaction. The diffusivity coefficient in Se/OHPC can reach a very high value of 1.3 × 10^(-11)cm^(2)/s, much higher than those in single pore size carbon hosts. Their effective volume expansion accommodation capability and reduced dissolution of polyselenides ensure the high stability of the battery. This work, for the first time, established the clear relationship between textural properties of cathode materials and their performance and demonstrates that the concept of the generalized Murray’s law can be used as efficient guidance for the rational design and synthesis of advanced hierarchically porous materials and the great potential of 3D OHPC materials as a practical high performance cathode material for Li-Se batteries.

关键词： 3D ordered hierarchically porous carbon(OHPC) Shuttle effect Cyclability High rate capability The generalized Murray’s law Li-Se batteries

来源：评论

学校读者我要写书评

暂无评论

In Situ Tin Doping to Enhance the Cycling Performance of 4.9 V LNMO Cathode materials 7

In Situ Tin Doping to Enhance the Cycling Performance of 4.9...

引用

7th International Conference on Power and Energy Applications, ICPEA 2024

作者： Li, Yan Du, Jinqiao Liang, Zhaojie Tian, Jie Wang, Pei Luo, Wen Electric Power Scientific Research Institute Shenzhen Power Supply Bureau Co. Ltd Shenzhen China Wuhan University of Technology State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan China

ISBN: (纸本)9798350356113

LiNi0.5Mn1.5O4 (LNMO) cathode material has the advantages of high energy density (650 Wh/kg), high discharge voltage (4.7 V vs Li+/Li), low raw material cost, low pollution, and high lithium ion transmission efficiency. It is a potential high power, low cost cobalt-free lithium-ion battery cathode material. However, the capacity decline of LNMO during high voltage charge and discharge processes leads to short cycle life, which limits its wide application and commercialization. To address this issue, this article uses in-situ Sn doping to enhance the cycle stability of LNMO. By uniformly mixing acetate salts in stoichiometric ratio and using one-step spray drying method to prepare undoped and Sn-doped LNMO cathode materials, this study systematically investigates the structural changes, morphological characteristics, and electrochemical performance before and after doping. The capacity retention rates of Sn-doped LNMO materials after 350 cycles at 0.7C are 93.5% and 94.5%, respectively, significantly higher than the undoped 80.8%, indicating that in-situ Sn doping can significantly enhance cycle performance. This study demonstrates that the LiNi0.5Mn1.46O0.04 electrode prepared by spray drying method, with its simple and straightforward synthesis process and excellent electrochemical performance, has the potential to become a high-performance lithium-ion batteries cathode material. © 2024 IEEE.

关键词： Lithium-ion batteries

来源：评论

学校读者我要写书评

暂无评论

Ultra-Thin Carbon-Doped Bi_(2)WO_(6) Nanosheets for Enhanced Photocatalytic CO_(2) Reduction

引用

Transactions of Tianjin University 2021年第4期27卷 338-347页

作者： Han Li Junchao Zhang Jiaguo Yu Shaowen Cao State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

The photocatalytic reduction of CO_(2) is a promising strategy to generate chemical ***,this reaction usually suf-fers from low photoactivity because of insuffi cient light absorption and rapid charge *** engineering has become an eff ective approach to improve the photocatalytic ***,ultra-thin(~4.1 nm)carbon-doped Bi_(2)WO_(6) nanosheets were prepared via hydrothermal treatment followed by *** ultra-thin nanosheet structure of the cata-lyst not only provides more active sites but also shortens the diff usion distance of charge carriers,thereby suppressing charge ***,carbon doping could successfully extend the light absorption range of the catalyst and remarkably promote charge separation,thus inhibiting *** a result,the as-prepared Bi_(2)WO_(6) photocatalyst with ultra-thin nanosheet structure and carbon doping exhibits enhanced photocatalytic CO_(2) reduction performance,which is twice that of pristine ultra-thin Bi_(2)WO_(6) *** study highlights the importance of defect engineering in photocatalytic energy conversion and provides new insights for fabricating effi cient photocatalysts.

关键词： Defect engineering Bi_(2)WO_(6)nanosheet Charge separation Light absorption

来源：评论

学校读者我要写书评

暂无评论

ZrO2-CPS/ZrO2 graded composite ceramics with high osteoinductivity for dental implants fabricated by stereolithography

引用

Ceramics International 2025年第16期51卷 21900-21912页

作者： Wu, Jiaxin Li, Zhi Meng, Xingliang Cheng, Bo Yang, Jing Li, Binbin Wang, Xinyu State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory Xianhu Hydrogen Valley Foshan528200 China Hainan Institute Wuhan University of Technology Sanya572000 China Biomedical Materials and Engineering Research Center of Hubei Province Wuhan University of Technology Wuhan430070 China School of Foreign Languages Wuhan University of Technology Wuhan430070 China Department of Stomatology Zhongnan Hospital of Wuhan University Wuhan430060 China

Promoting mechanical strength and osteoinductivity properties is crucial for dental implants materials. Herein, we synthesized silicocarnotite (CPS) powder via a hydrothermal method, and mixed it with zirconia to create a composite material for preparing four slurries: xCPS-(1−x)ZrO2 (x = 0, 1/6, 1/3, and 1/2 vol%). The optimal printing parameters for each slurry were investigated. Following the printing of the slurries, debinding was performed on them in the temperature range of 25 °C–600 °C in nitrogen atmosphere and 600 °C–1000 °C in air atmosphere, respectively, followed by sintering at 1350 °C for 2 h. The graded zirconia-based composite ceramics prepared using stereolithography (SLA) exhibited excellent mechanical properties, including a flexural strength of 742.37 ± 22.52 MPa, Vickers hardness of 7.29 ± 0.15 GPa, fracture toughness of 5.34 ± 0.29 MPa m1/2, and a relative density of 96.3 %. Compared with zirconia ceramics, the graded composite ceramics displayed higher surface roughness. The graded composite ceramics degraded and released Ca, Si, and P ions, promoting MC3T3-E1 cells proliferation, adhesion, and osteogenic differentiation. These findings suggest that ZrO2-CPS/ZrO2 graded composite ceramics synthesized via SLA holds great potential as dental implants with high osteoinductivity. © 2025

关键词： Fracture toughness

来源：评论

学校读者我要写书评

暂无评论

Copper Ions Removal from Wastewater by Electrocoagulation Using Cement-based Cathode Plates

引用

Journal of Wuhan University of technology(materials Science) 2023年第2期38卷 387-393页

作者： YOU Song WU Jing WANG Shizhe WANG Wei LI Qiong ZAHNG Ganggang DING Qinjun WANG Luoxin College of Materials Science and Engineering State Key Laboratory of New Textile Materials&Advanced Processing TechnologyWuhan Textile UniversityWuhan430200China Department of Logistics Support Wuhan University of TechnologyWuhan430070China School of Materials Science and Engineering Wuhan University of TechnologyWuhan430070China

The present work uses PEO solution to well disperse carbon fiber and identifies percolation thresholds of carbon fiber and carbon black which are used as conductive *** resultant cathode plates have an average compressive strength of 27.3 MPa and flexural strength of 29.09 MPa,which demonstrate excellent mechanical *** Cu^(2+)removal efficiency was measured at different current densities in EC process with cement-based cathode plate,while the voltage changes were *** results showed that the cement-based cathode plate operated stably and achieved 99.7%removal of 1 L of simulated wastewater with a Cu^(2+)concentration of 200 ppm at a current density of 8 m A/cm^(2)for 1 *** of floc and tested cathode plates,SEM and EDS analyses,and repeatability testing of the tested plates demonstrate the reusability of the plates,proving that cement-based plates can effectively replace metal cathode plates,reduce the cost of EC and improve the applicability of EC devices.

关键词： electrocoagulation cathode plate cement-based conductive materials copper ions repeatability

来源：评论

学校读者我要写书评

暂无评论

Crystallographic micro-mechanism of faceted crack initiation in near-αtitanium alloy Ti6321 under room-temperature fatigue and dwell fatigue loadings

引用

材料科学技术（英文版） 2025年第2期205卷 109-126页

作者： Wenyuan Zhang Qiaonan Shu Jiangkun Fan Panpan Fan Xiangyi Xue Peng Jiang Minjie Lai Bing Tang Zhiqian Liao Hongchao Kou Jinshan Li State Key Laboratory of Solidification Processing Northwestern Polytechnical UniversityXi'an 710072China State Key Laboratory of Solidification Processing Northwestern Polytechnical UniversityXi'an 710072China National & Local Joint Engineering Research Center for Precision Thermoforming Technology of Advanced Metal Materials Xi'an 710072China Chongqing Innovation Center Northwestern Polytechnical UniversityChongqing 401135China Luoyang Ship Material Research Institute Luoyang 471000China

Crack initiation mechanism of dwell fatigue has always been a key problem in rationalizing the dwell effect,and it is not completely understood *** study conducted stress-controlled low-cycle fatigue and dwell fatigue tests on Ti-6Al-3Nb-2Zr-1Mo alloy with bimodal microstructure to reveal its microstruc-tural characteristics and crack initiation *** study demonstrated that the faceted primaryα nodules located near the specimen surface acted as crack initiation sites during both fatigue and dwell fatigue *** trace analysis revealed that faceted cracking occurred at(0001)basal plane with the maximum Schmid factor value through a special cracking mode referred to as(0001)twist boundary *** criteria of parameters C1 and C2 were proposed based on experimental observation and molecular dynamics simulations,which well identify candidates for(0001)twist boundary crack *** demonstrated that grain pairs combining a moderately high Schmid factor for basal slip and a well-orientated Burgers vector in the out-of-surface plane was the preferable location for surface(0001)twist-boundary crack initiation,and grain pairs combining a high Schmid factor for basal slip and a high normal stress on basal plane are perfect candidates for subsurface *** on this,phenomeno-logical models are proposed to explain the surface(0001)twist-boundary cracking mechanism from the perspective of surface extrusion-intrusion-induced micro-notches.

关键词： Titanium alloy Dwell fatigue Facet Fatigue crack initiation Crystallographic orientation

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：