检索结果-内蒙古大学图书馆

Flexible and highly-sensitive pressure sensor based on controllably oxidized MXene

InfoMat 2022年第9期4卷 60-71页

作者： Yanan Ma Yongfa Cheng Jian Wang Si Fu Mengjun Zhou Yue Yang Baowen Li Xin Zhang Ce-Wen Nan State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Center of Smart Materials and Devices&International School of Materials Science and EngineeringWuhan University of TechnologyWuhanChina School of Mathematics Physics and Optoelectronic EngineeringHubei University of Automotive TechnologyShiyanChina Center for Nanoscale Characterization&Devices(CNCD) Wuhan National Laboratory for Optoelectronics(WNLO)Huazhong University of Science and Technology(HUST)WuhanChina Information Materials and Intelligent Sensing Laboratory of Anhui Province Key Laboratory of Structure and Functional Regulation of Hybrid Materials of Ministry of EducationInstitutes of Physical Science and Information TechnologyAnhui UniversityHefeiChina State Key Lab of New Ceramics and Fine Processing School of Materials Science and EngineeringTsinghua UniversityBeijingChina

Conductive Ti_(3)C_(2)T_(x)MXenes have been widely investigated for the construction of flexible and highly-sensitive pressure *** the inevitable oxidation of solution-processed MXene has been recognized,the effect of the irreversible oxidation of MXene on its electrical conductivity and sensing properties is yet to be ***,we construct a highly-sensitive and degradable piezoresistive pressure sensor by coating Ti_(3)C_(2)T_(x)MXene flakes with different degrees of in situ oxidation onto paper substrates using the dipping-drying *** situ oxidation can tune the intrinsic resistance and expand the interlayer distance of MXene *** partially oxidized MXene-based piezoresistive pressure sensor exhibits a high sensitivity of 28.43 kPa^(-1),which is greater than those of pristine MXene,over-oxidized MXene,and state-of-the-art paper-based pressure ***,these sensors exhibit a short response time of 98.3 ms,good durability over 5000 measurement cycles,and a low force detection limit of 0.8 ***,MXene-based sensing elements are easily degraded and environmentally *** MXene-based pressure sensor shows promise for practical applications in tracking body movements,sports coaching,remote health monitoring,and human–computer interactions.

关键词： adjustable sensitivity in situ oxidation interlayer distance MXene pressure sensor

来源：评论

学校读者我要写书评

暂无评论

Co-enhancement of thermal conduction and radiation through morphologies controlling of graphene functional layer for chip thermal management

引用

Nano Research 2024年第10期17卷 8885-8892页

作者： Shuting Cheng Kun Wang Shichen Xu Yi Cheng Ruojuan Liu Kewen Huang Hao Yuan Wenjuan Li Yuyao Yang Fushun Liang Fan Yang Kangyi Zheng Zhiwei Liang Ce Tu Mengxiong Liu Xiaomin Yang Jingnan Wang Xuzhao Gai Yuejie Zhao Xiaobai Wang Yue Qi Zhongfan Liu State Key Laboratory of Heavy Oil Processing College of ScienceChina University of PetroleumBeijing 102249China Centre for Nanochemistry Beijing Science and Engineering Centre for NanocarbonsBeijing National Laboratory for Molecular SciencesCollege of Chemistry and Molecular EngineeringPeking UniversityBeijing 100871China Beijing Graphene Institute(BGI) Beijing 100095China College of Energy Soochow Institute for Energy and Materials Innovations(SIEMIS)Jiangsu Provincial Key Laboratory for Advanced Carbon Materials and Wearable Energy TechnologiesSoochow UniversitySuzhou 215006China Department of Chemistry College of Chemistry and Materials EngineeringBeijing Technology and Business UniversityBeijing 100048China

With the continuous advancements in electronics towards downsizing and integration,efficient thermal dissipation from chips has emerged as a critical factor affecting their lifespan and operational *** fan-less chip cooling system has two critical interfaces for thermal transport,which are the contact interface between the base and the chip dominated by thermal conduction,and the surface of the fins dominated by thermal *** different thermal transfer modes of these two critical interfaces pose different requirements for thermal management *** the study,a novel approach was proposed by developing graphene thermal transport functional material whose morphology could be intentionally designed via reformed plasmaenhanced chemical vapor deposition(PECVD)methods to meet the diverse requirements of heat transfer ***,graphene with multilevel branching structure of vertical graphene(BVG)was fabricated through the hydrogenassisted PECVD(H_(2)-PECVD)strategy,which contributed a high emissivity of~*** was deposited on the fins’surface and functioned as the radiation enhanced layer to facilitate the rapid radiation of heat from the heat sinks into the surrounding ***,the well-oriented vertical graphene(OVG)was successfully prepared through the vertical electric field-assisted PECVD process(EF-PECVD),which showed a high directional thermal conductivity of~53.5 W·m^(-1)·K^(-1).OVG was deposited on the contact interface and functioned as the thermal conduction enhanced layer,allowing for the quick transmission of heat from the chip to the heat *** this design concept,the two critical interfaces in the chip cooling system can be jointly enhanced,resulting in a remarkable cooling efficiency enhancement of~30.7%,demonstrating that this novel material possessed enormous potential for enhancing the performance of cooling ***,this research not only provided new design concepts for the cooling system

关键词： chip thermal management thermal conduction thermal radiation graphene morphology control

来源：评论

学校读者我要写书评

暂无评论

Microstructure and tribological properties of -oriented 3C-SiC by chemical vapor deposition

引用

Ceramics International 2025年

作者： Yang, Wenxuan Huang, Wei Li, Cuicui Wang, Chongjie Zhang, Chitengfei Tu, Rong Zhang, Song Hubei Longzhong Laboratory No.101 Luming Road Xiangyang441000 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China Hubei Technology Innovation Center for Advanced Composites Wuhan430070 China

Highly -oriented 3C-SiC coatings were fabricated by chemical vapor deposition method at different temperatures. As deposition temperature increased from 1473 K to 1773 K, the surface structure of -oriented 3C-SiC transitioned from hexagonal structure with sixfold symmetry to hill-like structure, and finally to conical porous surface composed of stacked short rods. Owing to alteration of surface structure, the hardness of 3C-SiC coatings presented a trend of initially increasing and subsequently decreasing. The 3C-SiC coating deposited at 1673 K possessed the highest hardness, with a value of 42.08 GPa. The average friction coefficient for 3C-SiC/Si3N4 pair ranged from 0.258 to 0.569. The wear rate and hardness exhibited opposite trends. Compared with 3C-SiC coatings prepared at the other three temperatures, the 3C-SiC coating deposited at 1573 K exhibited the lowest wear rate under loads of 5 N, 10 N, and 15 N. Furthermore, the lowest wear rate, recorded at 15 N, was 4.1 × 10−6 mm3/Nm, attributed to high hardness and uniform grain size. The wear mechanism of -oriented 3C-SiC coatings during dry sliding primarily involved fracture, leading to fatigue and third-body wear. © 2025 Elsevier Ltd and Techna Group S.r.l.

关键词： Rockwell hardness

来源：评论

学校读者我要写书评

暂无评论

g-C_(3)N_(4)nanosheets coupled with CoSe_(2)as co-catalyst for efficient photooxidation of xylose to xylonic acid

引用

Green Energy & Environment 2025年第1期10卷 231-238页

作者： Qi Hao Yijun Liu Ren Zou Ge Shi Shilian Yang Linxin Zhong Wu Yang Xiao Chi Yunpeng Liu Shimelis Admassie Xinwen Peng State Key Laboratory of Pulp and Paper Engineering South China University of TechnologyGuangzhou510641GuangdongChina Hainan Key Laboratory of Storage&Processing of Fruits and Vegetables Agricultural Products Processing Research InstituteChinese Academy of Tropical Agricultural SciencesZhanjiangGuangdong524001China Department of Chemistry and Centre for Advanced 2D Materials(CA2DM)National University of Singapore 3 Science Drive 3 Singapore117543Singapore School of Materials Science and Hydrogen Energy Foshan UniversityFoshan528231GuangdongChina Department of Chemistry Addis Ababa UniversityPO BOX 1176Addis AbabaEthiopia

Photocatalysis has emerged as an effective approach to sustainably convert biomass into value-added ***_(2)is a promising nonprecious,efficient cocatalyst for photooxidation,which can facilitate the separation of photogenerated electron–holes,increase the reaction rates,and enhance photocatalytic *** this work,we synthesized a stable and efficient photocatalysis system of CoSe_(2)/g-C_(3)N_(4)through attaching CoSe_(2)on g-C_(3)N_(4)sheets,with a yield of 50.12%for the selective photooxidation of xylose to xylonic *** light illumination,the photogenerated electrons were prone to migrating from g-C_(3)N_(4)to CoSe_(2)due to the higher work function of CoSe_(2),resulting in the accelerated separation of photogenerated electron–holes and the promoted ***,this study reveals the unique function of CoSe_(2),which can significantly promote oxygen adsorption,work as an electron sink and accelerate the generation of ·O_(2)^(-),thereby improving the selectivity toward xylonic acid over other *** work provides useful insights into the design of selective photocatalysts by engineering g-C_(3)N_(4)for biomass high-value utilization.

关键词： Biomass photooxidation Hemicelluloses Xylose g-C_(3)N_(4) Xylonic acid

来源：评论

学校读者我要写书评

暂无评论

从废旧电池中直接提取锂实现锂的高效回收

引用

Science Bulletin 2024年第11期69卷 1697-1705页

作者：刘威刘猛闯马纷纷覃明盛钟伟陈忻曾子琪程时杰谢佳 State Key Laboratory of Advanced Electromagnetic Technology School of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuhan 430074China State Key Laboratory of Materials Processing and Die&Mould Technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan 430074China School of Chemistry and Chemical Engineering Huazhong University of Science and TechnologyWuhan 430074China GuSu Laboratory of Materials Suzhou 215123China Suzhou Laboratory Suzhou 215123China

The flourishing expansion of the lithium-ion batteries(LIBs) market has led to a surge in the demand for lithium resources. Developing efficient recycling technologies for imminent large-scale retired LIBs can significantly facilitate the sustainable utilization of lithium resources. Here, we successfully extract active lithium from spent LIBs through a simple, efficient, and low-energy-consumption chemical leaching process at room temperature, using a solution comprised of polycyclic aromatic hydrocarbons and ether solvents. The mechanism of lithium extraction is elucidated by clarifying the relationship between the redox potential and extraction efficiency. More importantly, the reclaimed active lithium is directly employed to fabricate LiFePO_(4) cathode with performance comparable to commercial materials. When implemented in 56 Ah prismatic cells, the cells deliver stable cycling properties with a capacity retention of ~90% after 1200 cycles. Compared with the other strategies, this technical approach shows superior economic benefits and practical promise. It is anticipated that this method may redefine the recycling paradigm for retired LIBs and drive the sustainable development of industries.

关键词： Retired lithium-ion batteries Lithium recycling Chemical leaching Active lithium Lithium iron phosphate

来源：评论

学校读者我要写书评

暂无评论

Operating conditions combination analysis method of optimal water management state for PEM fuel cell

引用

Green Energy and Intelligent Transportation 2023年第4期2卷 28-42页

作者： Wenxin Wan Yang Yang Yang Li Changjun Xie Jie Song Zhanfeng Deng Jinting Tan Ruiming Zhang School of Automation Wuhan University of TechnologyWuhan430070China Hubei Key Laboratory of Advanced Technology for Automotive Components Wuhan University of TechnologyWuhan430070China Department of Electrical Engineering Chalmers University of TechnologyGothenburg41258Sweden Modern Industry College of Artificial Intelligence and New Energy Vehicles Wuhan University of TechnologyWuhan430070China Global Energy Interconnection Research Institute Beijing102211China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan430070China Guangdong Hydrogen Energy Institute of Wuhan University of Technology Foshan528000China

The water content of proton exchange membrane fuel cells(PEMFCs)affects the transport of reactants and the conductivity of the *** water management measures can improve the performance and extend the lifespan of the fuel *** water management state of the stack is influenced by various external operating conditions,and optimizing the combination of these conditions can improve the water management state within the *** that the stack's internal resistance can reflect its water management state,this study first establishes an internal resistance-operating condition model that considers the coupling effect of temperature and humidity to determine the variation trend of total resistance and stack humidity with single-factor operating ***,the water management state optimization method based on the ANN-HGPSO algorithm is proposed,which not only quantitatively evaluates the influence weights of different operating conditions on the stack's internal resistance but also efficiently and accurately obtains the optimal combination of five operating conditions:working temperature,anode gas pressure,cathode gas pressure,anode gas humidity,and cathode gas humidity to achieve the optimal water management state in the stack,within the entire range of current ***,the response surface experimental results of the stack also validate the effectiveness and accuracy of the ANN-HGPSO *** method mentioned in this article can provide effective strategies for efficient water management and output performance optimization control of PEMFC stacks.

关键词： PEMFC Water management statue Internal resistance-operating condition model Operating condition optimization Response surface method

来源：评论

学校读者我要写书评

暂无评论

Taming the Anchor and Conversion of Polyselenides with a Self-Reinforcing Host in Lithium–Selenium Batteries

SSRN

引用

SSRN 2024年

作者： Li, Hongyan Dong, Wen-Da Cao, Yueqiang Barakat, Tarek Laboureur, Marvin Ran, Mao-Jin Hu, Zhi-Yi Zhang, Hongxian Jin, Cheng-Bin Li, Yu Su, Bao-Lian College of Materials and Chemistry China Jiliang University Hangzhou310018 China University of Namur NamurB-5000 Belgium State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Hubei Wuhan430074 China State Key Laboratory of Chemical Engineering School of Chemical Engineering East China University of Science and Technology Shanghai200237 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing China

Energy-dense lithium–selenium (Li–Se) batteries have attracted increasing attention, while their practical application is still hindered, highly relating to the volume expansion and low conductivity of Se and shuttle of Li polyselenides (LiPSes). Herein, a concurrent anchoring/converting strategy is proposed to restrain the dissolution and realize the rapid conversion of LiPSes. A prototypical regulator comprises of polar catalysts embedded in the interconnected porous muti-walled carbon network (i.e., CoSnO3 nanocubes/CNTs), which promises fast electron/ion transportation and inhibits volumetric effect. Moreover, CoSnO3 as redox accelerator promotes the bidirectional conversion of polyselenides by chemical adsorption and decreasing the reaction energy barrier. Consequently, the self-reinforcing optimized cathode exhibits superior initial capacity of 730 mAh g−1, greatly enlarged capacity after 200 cycles (increase by ~32%), and superior rate capacity (153 mAh g−1 at 2 C). This work uncovers the roles of electronic/ionic conductivity and adsorption/catalysis in Li–Se batteries, providing a guidance for taming the utilization and kinetics of cathode from material perspectives. © 2024, The Authors. All rights reserved.

关键词： Adsorption

来源：评论

学校读者我要写书评

暂无评论

Textured silicon nitride ceramics with enhanced properties fabricated by high pressure sintering

引用

Ceramics International 2025年

作者： Tao, Haoyu Qin, Xiaowei Sui, Jiahua Zou, Ji Wang, Weimin Ji, Wei Fu, Zhengyi Hubei Longzhong Laboratory Wuhan University of Technology Xiangyang Demonstration Zone Xiangyang China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China

Silicon nitride (Si3N4) ceramics with a textured morphology were prepared via high-pressure sintering in this study. The mechanical and thermal properties of the prepared materials in different orientations were investigated. Compared with the Si3N4 ceramics prepared at 1700 °C under low pressure of 50 MPa, the specimens prepared under high pressure of 200 MPa showed an obvious textured microstructure and a high fracture toughness (8.2 ± 0.5 MPa m1/2). Especially, the thermal conductivity was determined to be 105 W m−1 K−1 along the texture direction and 64 W m−1 K−1 in the vertical direction, respectively. The as-prepared Si3N4 with a morphological texture was anisotropic in hardness and toughness. High temperature and high pressure played a crucial role in the formation of Si3N4 ceramic texture and the enhancement of comprehensive properties. © 2025 Elsevier Ltd and Techna Group S.r.l.

关键词： Fracture toughness

来源：评论

学校读者我要写书评

暂无评论

Pressure-controlled synergy between dehydrogenation and densification in TiH2 sintering

引用

Journal of the European Ceramic Society 2025年第14期45卷

作者： Hu, Tianxiao Lin, Mengting Zou, Ji Wang, Weimin Ji, Wei Fu, Zhengyi Hubei Longzhong Laboratory Wuhan University of Technology Xiangyang Demonstration Zone Xiangyang China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China

Titanium hydride (TiH2) ceramics have become key high-performance hydrogen storage materials. However, the sintering of TiH2 faces significant challenges due to the low temperature of dehydrogenation reaction (300–800 °C). In this study, high-pressure spark plasma sintering (HPSPS) technique was employed to successfully realize low-temperature high-density preparation by suppressing dehydrogenation and regulating densification kinetics under a high pressure (200 MPa). Under the optimized conditions (750 °C, 200 MPa, and 10 min), a fully dense single face-centered cubic (FCC) δ-Ti(H) phase bulk material was fabricated. The initial dehydrogenation temperature of samples fabricated by high-pressure spark plasma sintering (HPSPS) was higher than the dehydrogenation temperature of powder. Mechanistic analyses showed that high pressure inhibited hydrogen escape by compressing pores while promoting particle plastic flow and interfacial bonding. Increasing holding time from 5 to 10 min enhanced diffusion-dominated densification but exacerbated dehydrogenation-induced porosity under low-pressure conditions. The study shows that high pressure compaction can alleviate the contradiction between traditional high temperature densification and low temperature decomposition of TiH2, and offers a new strategy for the efficient densification of materials for low temperature decomposition. © 2025 Elsevier Ltd

关键词： Densification

来源：评论

学校读者我要写书评

暂无评论

Pillar effect boosting the electrochemical stability of Prussian bluepolypyrrole for potassium ion batteries

引用

Nano Research 2023年第5期16卷 6326-6333页

作者： Mengmeng Zhou Xiaomeng Tian Ying Sun Xiaojun He Hui Li Tianyi Ma Qin Zhao Jieshan Qiu Key Laboratory for Green Synthesis and Preparative Chemistry of Advanced Materials of Liaoning Province Institute of Clean Energy ChemistryCollege of ChemistryLiaoning UniversityShenyang 110036China Anhui Key Laboratory of Coal Clean Conversion and High Valued Utilization Key Laboratory of Metallurgical Emission Reduction&Resources Recycling Ministry of EducationSchool of Chemistry and Chemical EngineeringAnhui University of TechnologyMaanshan 243002China School of Science RMIT UniversityMelbourne VIC 3000Australia State Key Laboratory of Chemical Resource Engineering College of Chemical EngineeringBeijing University of Chemical TechnologyBeijing 100029China

Due to the high theoretical capacity and electrode potential,Prussian blue is regarded as promising cathode material for potassium ion ***,inferior structural stability,poor electronic conductivity,ambiguous energy storage mechanism have limited the application of Prussian blue ***,a highly stable Prussian blue-polypyrrole(PB-PPY)composite has been prepared by a facile one-step ***-PPY displays higher discharging capacity,better rate capacity,and longer cycling lifespan than that of pure Prussian blue in potassium ion *** superior electrochemical performance can be attributed to the unique synthesis strategy to reduce the content of vacancies and crystal water in Prussian blue and enhance the ***,partial K ions have been evidenced that could remain in the Prussian blue framework,which contributes the long-term cycling *** K ions in the framework play the role of“pillars”to support the framework of Prussian blue and relieve the structural stress during the intercalation and de-intercalation of K *** work will reveal a new energy storage mechanism of Prussian blue and promote the design of high stability Prussian blue in the future.

关键词： Prussian blue high-stability framework pillar effect potassium ion batteries polypyrrole

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：