检索结果-内蒙古大学图书馆

Defect chemistry and thermal conductivity of the εSmO_(1.5)·(1−ε)ZrO_(2)(0.2≤ε≤0.65)ceramics:Effect of the nonstoichiometry

引用

Journal of advanced Ceramics 2024年第11期13卷 1823-1834页

作者： Zhixue Qu Tong Zhang Wei Pan Key Laboratory of Advanced Functional Materials Education Ministry of ChinaCollege of Materials Science and EngineeringBeijing University of TechnologyBeijing 100124China State Key Laboratory of New Ceramics and Fine Processing School of Materials Science and EngineeringTsinghua UniversityBeijing 100084China

Rare-earth zirconate pyrochlores,which exhibit various interesting properties,especially low thermal conductivity,are of great *** is an effective strategy involving defect engineering to reduce the thermal conductivity of *** this work,a long series of solid solutions,εSmO_(1.5)·(1−ε)ZrO_(2)(ε=0.200,0.250,0.350,0.400,0.450,0.500,0.525,0.550,0.600,and 0.650),were designed and synthesized to investigate the effects of nonstoichiometry on the structural evolution,defect chemistry,and thermal conductivity of SmO_(1.5)–ZrO_(2) system across the entire pyrochlore phase field and phase transition *** similarity of all the Raman spectra provides an incredible opportunity to confirm the structural details and evolution of pyrochlore and defective fluorite,as well as the emergence of the expected point defects.A new solution mechanism concerning nonstoichiometry was proposed and confirmed by analyzing the variations in the experimental density and Raman *** thermal conductivities of all the samples were measured,and investigated in terms of the phonon-scattering *** results show that the nonstoichiometry with SmO1.5 excess is more effective in reducing the thermal conductivity to an extremely low value of approximately 1 W/(m·K),which can be attributed to the dramatic decrease in the average acoustic velocity in addition to the strong phonon scattering of Zr ion vacancies and oxygen *** the other hand,the nonstoichiometry with ZrO_(2) excess significantly reduces the thermal conductivity at room temperature,but conversely leads to a slight increase of it above 200°*** former variation can be attributed to the phonon scattering of the 8a interstitial oxygen ions,which has a similar effectiveness to the defects on the SmO1.5-rich *** latter variation may be attributed to the Umklapp scattering of phonons.

关键词： nonstoichiometry pyrochlore rare-earth zirconate thermal conductivity defect chemistry

来源：评论

学校读者我要写书评

暂无评论

Multifunctional 3D electrodes for tunable high-performance hybrid zinc batteries

引用

Journal of materials Science & technology 2024年第11期178卷 155-161页

作者： Yiming Chen Minxuan Zhou Junpeng Wu Xidan Xiao Lin Xu School of Chemistry and Materials Science Hubei Engineering UniversityXiaogan 432000China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

The high energy density and long cycling life of zinc-based batteries are restricted by the single electro-chemical reaction *** improve the electrochemical performance of batteries,electrode materials,electrolytes and membranes are regularly modified,while the construction of battery systems is often ***,a multifunctional electrode was prepared via 3D printing,which successfully coupled the metal oxide/hydroxide-zinc battery(MZB)reaction and rechargeable zinc-air battery(RZAB)*** ultrathick hierarchical 3D electrode provided a tunable capacity for the MZB system,which enabled the possibility for feasible output regulation of this hybrid *** active material NiCoLDH was discov-ered to undergo structure reconstruction during cycling,which revealed the capacity fading *** delicate system design and discovery ensured a high-performance battery configuration and revealed the corresponding mechanism,opening a new avenue for developing high-performance zinc batteries.

关键词： Zinc battery Multifunctional electrode 3D printing Hierarchical 3D structure

来源：评论

学校读者我要写书评

暂无评论

The impact of the coupling relationship between projectile size and yarn dimension on the ballistic performance of plain weave fabric

引用

Defence technology(防务技术) 2025年第1期43卷 288-303页

作者： Kaiying Wang Xuan Zhou Wenke Ren Yiding Wu Yilei Yu Yi Zhou Lizhi Xu Guangfa Gao School of Mechanical Engineering Nanjing University of Science and TechnologyNanjing210094China State Key Laboratory of New Textile Materials and Advanced Processing Technologies Wuhan Textile UniversityWuhan430079China

Aramid fibers,due to their relatively high inter-yarn friction,high strength,high modulus,and other characteristics,have become a typical representative of flexible anti-ballistic materials in modern *** research on the anti-penetration of aramid fabrics mostly focuses unilaterally on the structure and performance of aramid fabrics or the shape and size of projectiles,with fewer studies on the coupled effect of both on ballistic *** study analyzes how the coupling relationship(or size effect)between the projectile and fiber bundle dimensions affects the fabric ballistic performance from a mesoscopic scale *** plain weave aramid fabric as the research object,considering different diameter projectiles,through a large number of ballistic impact tests and numerical simulations,parameters such as ballistic limit velocity,average energy absorption of fabric,and specific energy absorption ratio(average energy absorption of fabric divided by projectile cross-sectional area)are obtained for ballistic performance *** influence law of projectile size on the ballistic performance of high-performance fabrics is as follows:The relative range of fitted ballistic limit velocity at different target positions gradually decreases and then stabilizes as the projectile diameter increases,indicating that the fabric structure effect gradually disappears at a projectile diameter of 12 mm;The average ballistic limit velocity at three impact positions,P1,P2,and P3,provides the corresponding ballistic limit velocity for 1000D aramid fabric,which increases with projectile diameter but the rate of increase slows down at an inflection point,which in this study occurs where the fabric structure effect nearly disappears at a projectile diameter of 12 mm;The energy absorption ratio increases and then decreases as the projectile diameter increases from 4 mm to 20 mm,reaching a peak at the diameter of 12 mm due to the gradual disappearance of the fabri

关键词： Plain weave fabric Ballistic performance Aramid fiber Projectile size Ballistic experiment

来源：评论

学校读者我要写书评

暂无评论

The superior ballistic performance of highly stretchable and flexible double-face knitted fabrics(DFKF):An experimental investigation

引用

Defence technology(防务技术) 2025年第3期45卷 119-136页

作者： Yi Zhou Xiangpeng Xin Yang Li Yang Zhou Rui Zhang Lizhi Xu State Key Laboratory of New Textile Materials and Advanced Processing Technologies Wuhan Textile UniversityWuhan 430200China School of Mechanical Engineering Nanjing University of Science and TechnologyNanjing 210094China

When the protective and protected systems are detached,the former can be allowed to absorb the kinetic energy of the impacting projectile through large deformation without considering the back face signature of the *** paper presents a novel double-face knitted fabric(DFKF)designed for this very impacting *** tests equipped with high-speed camera were used to characterize the ballistic performance with the impact velocities ranging from 100 m/s to 450 m/*** results showed that the ballistic limits(V_(bl))of DFKF are approximately triple and double that of its counterpart UD and plain fabrics,*** mass-normalized metrics,the specific energy absorption(SEA)is 250%and 350%greater than the UD and plain fabrics at their corresponding V_(bl)*** quasi-static tests showed that the DFKF displayed greater resilience,crease recovery properties,and flexibility,which also made it an especially better candidate than UD and plain weaves for the design of umbrella surface *** was also found that DFKF is dependent on yarn count and the incorporation of spandex.A prototype anti-ballistic umbrella is manufactured using DFKF made of 200D multi-filament *** ballistic performance is also sensitive to the impact site when the umbrella is subjected to impact.

关键词： DFKF Ballistic performance SEA Resilience Energy absorption Anti-ballistic umbrella

来源：评论

学校读者我要写书评

暂无评论

NaTiO_(x)-modified high-nickel layered oxide cathode for stable sodium-ion batteries

引用

Carbon Energy 2025年第1期7卷 283-291页

作者： Yingcong Liu Xing Zhou Dongwei He Xiaowei Liu Chao Yang Dawei Xu Meilong Wang Ruitao Sun Bin Zhang Jingjing Xie Jin Han Wen Chen Ya You State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Yibin Libode New Materials Co.Ltd SichuanChina International School of Materials Science and Engineering School of Materials Science and MicroelectronicsWuhan University of TechnologyWuhan 430070China

The O3-type layered cathode with high Ni content has attracted much attention because of its high capacity and simple synthesis ***,surface side reaction and O3-P3 phase transitions would occur during Na+insertion/extraction,resulting in unsatisfying electrochemical ***,O3-Na[Ni_(0.6)Co_(0.2)Mn_(0.2)]O_(2)(NNCM622)cathode is modified by a NaTiOx coating layer in a wet chemistry method,which reduces the parasitic reaction and facilitates Na+***,the partially doped Ti improves structural stability by restraining the irreversible multiple-phase *** a result,the modified NNCM622 cathode obtains a high specific capacity of 143.4 mAh g^(−1)and an improved capacity retention of 69%after 300 *** work offers new prospects for stabilizing the NNCM622 cathode with a feasible coating strategy.

关键词： cathode high-nickel layered oxides sodium-ion battery surface modification

来源：评论

学校读者我要写书评

暂无评论

Spatial confinement of free-standing graphene sponge enables excellent stability of conversion-type Fe_(2)O_(3)anode for sodium storage

引用

Chinese Chemical Letters 2025年第3期36卷 544-549页

作者： Jun Dong Senyuan Tan Sunbin Yang Yalong Jiang Ruxing Wang Jian Ao Zilun Chen Chaohai Zhang Qinyou An Xiaoxing Zhang Hubei Key Laboratory for High-efficiency Utilization of Solar Energy and Operation Control of Energy Storage System Hubei University of TechnologyWuhan 430068China State Key Laboratory of New Textile Materials and Advanced Processing Technologies Wuhan Textile UniversityWuhan 430200China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Nanjing University of Aeronautics and Astronautics Nanjing 210016China

Conversion-type anode materials are highly desirable for Na-ion batteries(NIBs)due to their high theoretical ***,the active materials undergo severe expansion and pulverization during the sodiation,resulting in inferior cycling ***,a self-supporting three-dimensional(3D)graphene sponge decorated with Fe_(2)O_(3)nanocubes(rGO@Fe_(2)O_(3))is ***,the 3D graphene sponge with resilience and high porosity benefits to accommodate the volume expansion of the Fe_(2)O_(3)nanocubes and facilitates the rapid electrons/ions transport,enabling spatial confinement to achieve outstanding ***,the free-standing rGO@Fe_(2)O_(3)can be directly used as an electrode without additional binders and conductive additives,which helps to obtain a higher energy *** on the total mass of the rGO@Fe_(2)O_(3)material,the rGO@Fe_(2)O_(3)anode presents a specific capacity of 859 mAh/g at 0.1 A/*** also delivers an impressive cycling performance(327 mAh/g after 2000 cycles at 1 A/g)and a superior rate capacity(162mAh/g at 20 A/g).The coin-type Na_(3)V_(2)(PO_(4))_(3)@C//rGO@Fe_(2)O_(3)NIB exhibits an energy density of 265.3Wh/*** unique 3D ionic/electronic conductive network may provide new strategies to design advanced conversion-type anode materials for high-performance NIBs.

关键词： Conversion-type anode Spatial confinement Fe_(2)O_(3) Graphene network Self-supporting Sodium-ion batteries

来源：评论

学校读者我要写书评

暂无评论

Ultrafast Laser Irradiation Induced Oxidation of Dopant-Free Spiro-OMeTAD for Improving the Perovskite Solar Cells Performance

引用

Energy & Environmental materials 2025年第2期8卷 284-290页

作者： Jiaqi Meng Xiangyu Chen Weihan Li Nianyao Chai Zhongle Zeng Yunfan Yue Fengyi Zhao Xuewen Wang Center of Femtosecond Laser Manufacturing for Advanced Materials and Devices State Key Laboratory of Advanced Technology for Materials Synthesis and ProcessingWuhan University of TechnologyWuhan 430070China School of Materials Science and Engineering Wuhan University of TechnologyWuhan 430070China International School of Materials Science and Engineering Wuhan University of TechnologyWuhan 430070China National Energy Key Laboratory for New Hydrogen-Ammonia Energy Technologies Foshan Xianhu LaboratoryFoshan 528000China

The exceptional photoelectric performance and high compatibility of perovskite materials render perovskite solar cells highly promising for extensive development,thus garnering significant *** perovskite solar cells,the hole transport layer plays a crucial *** the commonly employed organic small molecule hole transport material Spiro-OMeTAD,a certain period of oxidation treatment is required to achieve complete transport ***,this posttreatment oxidation processes typically rely on ambient oxidation,which poses challenges in terms of precise control and leads to degradation of the perovskite light absorption *** approach fails to meet the demands for high efficiency and stability in practical ***,the mechanism of ultrafast laser on Spiro-OMeTAD and the reaction process for laser-induced oxidation of it are ***_(2) at Perovskite/Spiro-OMeTAD interface breaks down to produce I_(2) upon ultrafast laser irradiation and I_(2) promote the oxidation *** the laser irradiation oxidation processing,a higher stability of perovskite solar cells is *** work establishes a new approach toward oxidation treatment of Spiro-OMeTAD.

关键词： hole transport layer perovskite solar cells ultrafast laser irradiation undoped Spiro-OMeTAD

来源：评论

学校读者我要写书评

暂无评论

Accelerated ion/electron transport kinetics and increased active sites via local internal electric fields in heterostructured VO_(2)–carbon cloth for enhanced zinc-ion storage

引用

Nano Research 2023年第1期16卷 503-512页

作者： Ping Luo Wenwei Zhang Wanyue Cai Zhen Huang Gangyuan Liu Chang Liu Shiyu Wang Feng Chen Lixue Xia Yan Zhao Shijie Dong Lu Xia Hubei Provincial Key Laboratory of Green Materials for Light Industry Hubei Engineering Laboratory of Automotive Lightweight Materials and ProcessingNew Materials and Green Manufacturing Talent Introduction and Innovation Demonstration Base School of Materials and Chemical EngineeringHubei University of TechnologyWuhan 430068China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China State Key Laboratory of Silicate Materials for Architectures International School of Materials Science and EngineeringWuhan University of TechnologyWuhan 430070China Wuhan Polytechnic University Wuhan 430023China

Although the performance of the self-standing electrode has been enhanced for aqueous zinc-ion batteries(AZIBs),it is necessary to explore and analyse the deep modification mechanism(especially interface effects).Herein,density functional theory(DFT)calculations are applied to investigate the high-performance cathode based on the VO_(2)/carbon cloth composites with heterostructures interface(H-VO_(2)@CC).The adsorption energy comparisons and electron structure analyses verify that HVO_(2)@CC has extra activated sites at the interface,enhanced electrical conductivity,and structural stability for achieving highperformance AZIBs due to the presence of built-in electric field at the ***,the designed self-standing HVO_(2)@CC cathode delivers higher rate capacity,longer-life cyclability,and faster electronic/ion transmission kinetics benefiting from the synergistic *** risks of active material shedding and dissolution during the dis/charge process of two cathodes were evaluated via ex-situ ultraviolet–visible(UV–vis)spectrum and inductively coupled plasma-atomic emission spectroscopy(ICP-AES)***,this investigation also explores the charge storage mechanism of H-VO_(2)@CC through various exsitu and in-situ characterization *** finding can shed light on the significant potential of heterostructures interface engineering in practical applications and provide a valuable direction for the development of cathode materials for AZIBs and other metal-ion batteries.

关键词： aqueous zinc ion battery heterostructures interface built-in electric field VO_(2)(B) density functional theory

来源：评论

学校读者我要写书评

暂无评论

Regulating the electromagnetic balance of materials by electron transfer for enhanced electromagnetic wave absorption

引用

Journal of materials Science & technology 2024年第28期195卷 63-73页

作者： Kunyao Cao Weiping Ye Yue Zhang Lewei Shen Rui Zhao Weidong Xue Xiaoyu Yang School of Materials and Energy University of Electronic Science and Technology of ChinaChengdu 610054China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing&Shenzhen Research Institute&Joint Laboratory for Marine Advanced Materials Shenzhen 518063China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing and International School of Materials Science&Engineeringand School of Materials Science&EngineeringWuhan University of TechnologyWuhan 430070China School of Engineering and Applied Sciences Harvard UniversityCambridgeMassachusetts 02138United States

The fact that single dielectric loss materials have disadvantages of excessive conductivities and impedance mismatches has given rise to a large effort to develop effective strategies to fabricate electromagnetic wave(EMW)absorbing materials comprised of components that bring about a balance between dielectric loss and magnetic ***,little is known about the essential features that regulate EMW absorption *** study focused on the development of a new EMW absorbing material and gaining information about factors that govern EMW absorption *** materials at the center of the effort are light weight and porous cobalt sulfonated phthalocyanine-reduced graphene oxide(CoSPcrGO)aerogels that were synthesized by using a simple hydrothermal method followed by *** properties of these materials that contribute to the electromagnetic balance between dielectric and magnetic loss were elucidated by first formulating a reasonable hypothesis about how the relative orien-tation of the components in CoSPc-rGO govern p-conjugation and electron transfer from rGO to CoSPc,which is proposed to be a key factor contributing to the regulation of the electromagnetic *** relaxation process of materials was analyzed in detail using a variety of approaches including theoretical calculation,spectroscopic measurements,and experimental and simulation *** fabricated CoSPc-rGO aerogels that contain an ultra-low content of 4%were found to exhibit an extraordinary microwave absorption performance associated with a strong reflection loss of-53.23 dB and a broad effective absorption bandwidth of 8.04 *** results of this study should provide an effective guide for new designs of composite materials for EMW absorption.

关键词： Microwave absorption Polarization relaxation Electromagnetic balance Electrons transfer DFT calculation

来源：评论

学校读者我要写书评

暂无评论

The effect of room temperature magnetic field on photoluminescence of Mn:CsPbBr_(3) quantum dots prepared by one-pot method in air

引用

Nano Research 2025年第4期18卷 561-568页

作者： Mengwei Chen Chenguang Shen Wei Huang Yingping Yang Jie Shen Department of Physics School of Physics and MechanicsWuhan University of TechnologyWuhan 430070China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing School of Materials Science and EngineeringWuhan University of TechnologyWuhan 430070China

The generation and manipulation of spin-polarized electrons at room temperature are essential for the development of advanced spin-optoelectronic *** this work,a one-pot method was used to successfully synthesize homogenous Mn:CsPbBr_(3) perovskite quantum dots in air with particle sizes of 7−8 *** effects of Mn doping on the structure,optical and magnetic properties of CsPbBr_(3) quantum dots were *** findings demonstrated proper Mn doping improved the crystallinity and photoluminescence(PL)of quantum *** prepared quantum dots have a narrow full width at half maximum emission(FWHM)of about 17−20 *** magnetic properties of the doped samples and the effect of the magnetic field on the PL spectra properties were *** results show that trace Mn doping can improve the room-temperature ferromagnetism of CsPbBr_(3) quantum *** with magnetic elements makes CsPbBr_(3) quantum dots more responsive to the applied magnetic *** at a lower 50 mT magnetic field,the PL peak of Mn:CsPbBr_(3) still declined 5.91%.Mn:CsPbBr_(3) quantum dots are a new type of multifunctional material that is beneficial to spintronics *** work demonstrates a low-cost synthesis *** should make all-inorganic perovskite quantum dots a promising material for room-temperature spin optoelectronic devices.

关键词： CsPbBr_(3)quantum dots Mn doping one-pot method ferromagnetism magnetic field

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：