检索结果-内蒙古大学图书馆

19th Annual Conference of China Electrotechnical Society, ACCES 2024

作者： Yao, Chengfeng Song, Li Zhou, Benzheng He, Junjia State Key Laboratory of Advanced Electromagnetic Engineering and Technology Huazhong University of Science and Technology Wuhan430074 China

ISBN: (纸本)9789819613786

The core-shell structure formed by coating can enhance the uniformity of particles within ZnO varistors, which is conducive to the improvement of their microstructure and comprehensive performance. In this study, the ZnO@Bi2O3 core-shell structure powder was prepared by chemical precipitation and calcination purification, and doped with Sb2O3 to form the ZnO@Bi2O3-Sb2O3 (ZBS) system powder, which was then compared with the doped sample. The alloying method was combined with high-temperature X-ray diffraction (HT-XRD) to investigate the phase evolution and its pattern, while scanning electron microscopy (SEM) and X-ray fluorescence (XRF) were employed to characterise the microstructure and elemental distribution. It was observed that the phase evolution of the ZBS system can be divided into two main stages: the generation of pyrochlore and its subsequent transformation to spinel. It is observed that Bi₂O₃ in the core-shell structure samples exhibits a certain selectivity for the reaction that generates the pyrochlore phase. Furthermore, the onset temperature of pyrochlore-to-spinel transformation is lower than that of the doped samples by 80–100 °C, and the reaction rate is faster. Base on the microstructural results, it was found that the core-shell structure powder spinel was more uniformly distributed with a smaller average grain size up to 5.074 μm and a more well-distributed particle size. The influence of the core-shell structure on the high-temperature sintering of ZnO varistor ceramics was discussed in terms of phase situation and microstructure. © Beijing Paike Culture Commu. Co., Ltd. 2025.

关键词： Sintering

来源：评论

学校读者我要写书评

暂无评论

Rotating Object Detection Method of Insulator Defect Base on Improved YOLOv5 11th

Rotating Object Detection Method of Insulator Defect Base on...

引用

11th Frontier Academic Forum of Electrical engineering, FAFEE 2024

作者： Wang, Yunxuan Yong, Yang Li, Chuan State Key Laboratory of Advanced Electromagnetic Engineering and Technology Huazhong University of Science and Technology Wuhan430074 China

ISBN: (纸本)9789819787791

The precise localization of insulators in visible images is crucial for ensuring the integrity of power systems. In UVAs inspections, challenges such as arbitrary angles, dense distributions, and complex backgrounds often hinder accurate detection. However, existing methods primarily employ axial horizontal detection boxes to detect insulators, which overlook insulator characteristics. To further improve the accuracy, this paper optimizes YOLOv5 across four key areas: rectangular box representation, feature extraction, lightweight convolution, and detection head design. The results show that this paper uses rotating detection boxes instead of axial horizontal detection boxes, which removes a large amount of redundant background information and improves the average accuracy and operation speed. Our experiments on the insulator defect dataset achieved the average accuracy of 97.91% at an intersection ratio of 0.5. Additionally, our algorithm shows promise for extending to defect detection in various power equipment, laying a solid foundation for future automation initiatives. © Beijing Paike Culture Commu. Co., Ltd. 2025.

关键词： Electric insulators

来源：评论

学校读者我要写书评

暂无评论

Advance Warning Prior to Capacity Plunge of Liquid Metal Battery Using Data-driven Methods

引用

IEEE Transactions on Industry Applications 2025年第3期61卷 4147-4154页

作者： Shi, Qionglin Zhou, Min Li, Haomiao Wang, Kangli Jiang, Kai Ministry of Education Huazhong University of Science and Technology State Key Laboratory of Advanced Electromagnetic Technology School of Electrical and Electronic Engineering School of Electrical and Electronic Engineering Engineering Research Center of Power Safety and Efficiency Wuhan China

The liquid metal battery (LMB) has gained attention as a novel energy storage technology due to its exceptional safety and long lifespan. Analyzing the aging trajectory, particularly capacity plunge process, is crucial for understanding its aging mechanism and enabling effective health diagnosis. However, it often lacks clear warning signs prior to the capacity plunge, hindering accurate capacity prediction and proactive measures in real-world applications. To address this challenge, this study proposes a data-driven method that effectively quantifies the capacity various in LMBs, enabling advance warning before the occurrence of a capacity plunge. Firstly, the Empirical Mode Decomposition method decomposes the capacity data into several components, representing different characteristics of LMBs. Subsequently, a Gaussian mixture model is applied to construct the feature distribution for each component, which exhibits a hump-shaped pattern. Finally, The Jensen-Shannon divergence is used to quantify the divergence of these humps, offering a concrete measure of LMB health and aging progression. The proposed method integrating both aging analysis and data-driven insights provides an advance warning of the capacity plunge, offering a reliable foundation for future lifespan prediction and fault diagnosis of LMBs. © 2025 IEEE.

关键词： Network security

来源：评论

学校读者我要写书评

暂无评论

Conversion-type cathode materials for high energy density solid-state lithium batteries

引用

Journal of Energy Chemistry 2025年第1期100卷 409-425页

作者： Yuhao Ma Shihong Qing Hongyu Liu Chuntao Ma Yuan Yu Chuang Yu Liping Wang School of Materials and Energy University of Electronic Science and Technology of ChinaChengdu 611731SichuanChina Zhejiang Provincial Key Laboratory of Fiber Materials and Manufacturing Technology Zhejiang Sci-Tech UniversityHangzhou 310018ZhejiangChina State Key Laboratory of Advanced Electromagnetic Engineering and Technology School of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuhan 430074HubeiChina

Solid-state lithium batteries(SSLBs)are regarded as an essential growth path in energy storage systems due to their excellent safety and high energy *** particular,SSLBs using conversion-type cathode materials have received widespread attention because of their high theoretical energy densities,low cost,and *** the great progress in research and development of SSLBs based on conversiontype cathodes,their practical applications still face challenges such as blocked ionic-electronic migration pathways,huge volume change,interfacial incompatibility,and expensive processing *** review focuses on the advantages and critical issues of coupling conversion-type cathodes with solid-state electrolytes(SSEs),as well as state-of-the-art progress in various promising cathodes(e.g.,FeS_(2),CuS,FeF_(3),FeF_(2),and S)in ***,representative research on conversion-type solid-state full cells is discussed to offer enlightenment for their practical ***,the energy density exhibited by the S cathode stands out impressively,while sulfide SSEs and halide SSEs have demonstrated immense potential for coupling with conversion-type ***,perspectives on conversion-type cathodes are provided at the material,interface,composite electrode,and battery levels,with a view to accelerating the development of conversion-type cathodes for high-energy–density SSLBs.

关键词： Conversion-type cathode Lithium-free cathode Solid-state electrolyte Solid-state lithium battery High energy density

来源：评论

学校读者我要写书评

暂无评论

Design and experimental study of a field-reversed configuration plasma thruster prototype

引用

Plasma Science and technology 2025年第3期27卷 118-126页

作者： Yuxuan HUANG Ming ZHANG Yong YANG Fangwei LYU Xiaopeng YI Chaofan LYU Yisong ZHANG Bo RAO State Key Laboratory of Advanced Electromagnetic Technology International Joint Research Laboratory of Magnetic Confinement Fusion and Plasma PhysicsSchool of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuhan 430074People’s Republic of China National Key Laboratory of Science and Technology on Vacuum Technology and Physics Lanzhou Institute of PhysicsLanzhou 730000People’s Republic of China

The field-reversed configuration(FRC)plasma thruster driven by rotating magnetic field(RMF),abbreviated as the RMF-FRC thruster,is a new type of electric propulsion technology that is expected to accelerate the deep space *** experimental prototype,including diagnostic devices,was designed and constructed based on the principles of the RMF-FRC thruster,with an RMF frequency of 210 kHz and a maximum peak current of 2 *** the rated operating conditions,the initial plasma density was measured to be 5×10^(17)m^(-3),and increased to 2.2×10^(19)m^(-3)after the action of *** coupling efficiency of RMF was about 53%,and the plasma current reached 1.9 *** axial magnetic field changed in reverse by 155 Gauss,successfully reversing the bias magnetic field of 60 Gauss,which verifies the formation of FRC *** optimization research,it was found that when the bias magnetic field is 100 Gauss,the axial magnetic field reverse variation caused by FRC is the highest at 164 *** experimental results are discussed and strategies are proposed to improve the performance of the prototype.

关键词： rotating magnetic field(RMF) field-reversed configuration(FRC) plasma thrusters plasma current

来源：评论

学校读者我要写书评

暂无评论

Improving the reliability of classical molecular dynamics simulations in battery electrolyte design

引用

Journal of Energy Chemistry 2025年第2期101卷 34-41,I0002页

作者： Xin He Yujie Zhang Haomiao Li Min Zhou Wei Wang Ruxing Wang Kai Jiang Kangli Wang State Key Laboratory of Advanced Electromagnetic Technology School of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuhan 430074HubeiChina State Key Laboratory of Materials Processing and Die&Mould Technology College of Materials Science and EngineeringHuazhong University of Science and Technology Wuhan 430074HubeiChina Hubei Collaborative Innovation Center for High-efficiency Utilization of Solar Energy Hubei University of TechnologyWuhan 430068HubeiChina

Explorations into new electrolytes have highlighted the critical impact of solvation structure on battery performance,Classical molecular dynamics(CMD)using semi-empirical force fields has become an essential tool for simulating solvation ***,mainstream force fields often lack accuracy in describing strong ion-solvent interactions,causing disparities between CMD simulations and experimental *** some empirical methods have been employed in some of the studies to address this issue,their effectiveness has been *** CMD research,supported by quantum chemical calculations and experimental data,reveals that the solvation structure is influenced not only by the charge model but also by the polarization *** empirical approaches that focused solely on adjusting ion-solvent interaction strengths overlooked the importance of polarization *** on this insight,we propose integrating the Drude polarization model into mainstream force fields and verify its feasibility in carbonate,ether,and nitrile *** experimental results demonstrate that this approach significantly enhances the accuracy of CMD-simulated solvation *** work is expected to provide a more reliable CMD method for electrolyte design,shielding researchers from the pitfalls of erroneous simulation outcomes.

关键词： Electrolyte Classical molecular dynamics Solvation structure Simulations

来源：评论

学校读者我要写书评

暂无评论

Elastic properties of Cu–6wt% Ag alloy wires for pulsed magnets investigated by ultrasonic techniques

引用

Chinese Physics B 2025年第2期34卷 90-95页

作者： Ziyu Li Tianyi Gu Wenqi Wei Yang Yuan Zhuo Wang Kangjian Luo Yupeng Pan Jianfeng Xie Shaozhe Zhang Tao Peng Lin Liu Qi Chen Xiaotao Han Yongkang Luo Liang Li Wuhan National High Magnetic Field Center Huazhong University of Science and TechnologyWuhan 430074China School of Physics Huazhong University of Science and TechnologyWuhan 430074China State Key Laboratory of Advanced Electromagnetic Engineering and Technology Huazhong University of Science and TechnologyWuhan 430074China School of Materials Science and Engineering State Key Laboratory for Materials Processing and Die&Mold TechnologyHuazhong University of Science and TechnologyWuhan 430074China

Conductor materials with good mechanical performance as well as high electrical and thermal conductivities are particularly important to break through the current bottle-neck limit(~ 100 T) of pulsed magnets. Here, we perform systematic studies on the elastic properties of the Cu–6wt% Ag alloy wire, which is a promising candidate material for the new-generation pulsed magnets, by employing two independent ultrasonic techniques, i.e., resonant ultrasound spectroscopy(RUS) and ultrasound pulse-echo experiments. Our RUS measurements manifest that the elastic properties of the Cu–6wt% Ag alloy wires can be improved by an electroplastic drawing procedure as compared with the conventional cold drawing. We also take this opportunity to test the availability of our newly-built ultrasound pulse-echo facility at the Wuhan National High Magnetic Field Center(WHMFC, China), and the results suggest that the elastic performance of the electroplastically-drawn Cu–6wt% Ag alloy wire remains excellent without anomalous softening under extreme conditions,e.g., in ultra-high magnetic field up to 50 T and nitrogen or helium cryogenic liquids.

关键词： high-field magnet Cu–Ag alloy ultrasonic techniques elastic constants

来源：评论

学校读者我要写书评

暂无评论

Interfacial modulation of nano Li_(7)La_(3)Zr_(2)O_(12) composite electrolytes prepared by solvent-free method

引用

Green Energy & Environment 2025年第3期10卷 528-536页

作者： Qigao Han Yaqing Guo Fuhe Wang Xuechun Lou Fengqian Wang Jun Zhong Jinqiao Du Jie Tian Weixin Zhang Shun Tang Shijie Cheng Yuancheng Cao Wuhan National Laboratory for Optoelectronics Huazhong University of Science and TechnologyWuhan430074China State Key Laboratory of Advanced Electromagnetic Engineering and Technology School of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuhan430074China Shenzhen Power Supply Co.Ltd. Shenzhen518001China

Solid-state batteries(SSBs) with high safety are promising for the energy fields,but the development has long been limited by machinability and interfacial ***,self-supporting,flexible Nano LLZO CSEs are prepared with a solvent-free method at 25℃.The 99.8 wt% contents of Nano LLZO particles enable the Nano LLZO CSEs to maintain good thermal stability while exhibiting a wide electrochemical window of 5.0 V and a high Li~+ transfer number of *** mean modulus reaches 4376 *** from the interfacial modulation,the Li|Li symmetric batteries based on the Nano LLZO CSEs show benign stability with lithium at the current densities of 0.1 mA cm^(-2),0.2 mA cm^(-2),and 0.5 mA cm^(-2).In addition,the Li|LiFePO_(4)(LFP) SSBs achieve favorable cycling performance:the specific capacity reaches128.1 mAh g^(-1) at 0.5 C rate,with a capacity retention of about 80% after 600 *** the further tests of the LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811) cathodes with higher energy density,the Nano LLZO CSEs also demonstrate good compatibility:the specific capacities of NCM811-based SSBs reach 177.9 mAh g^(-1) at 0.5 C rate,while the capacity retention is over 96% after 150 ***,the Li|LFP soft-pack SSBs verify the safety characteristics and the potential for application,which have a desirable prospect.

关键词： Solvent-free method Nano LLZO CSEs Interfacial modulation Cycling performance Safety characteristics

来源：评论

学校读者我要写书评

暂无评论

A DSVM-based MPC Strategy with Magnetizing Inductance Online Identification Method for Thrust Ripple Suppression in Linear Induction Machine

引用

IEEE Transactions on Power Electronics 2025年第8期40卷 10746-10757页

作者： Guo, Yingcong Xu, Wei Ge, Jian Xiao, Han Tang, Yirong Shangguan, Yongdao Southwest Jiaotong University School of Electrical Engineering Chengdu610031 China Beijing100190 China Huazhong University of Science and Technology State Key Laboratory of Advanced Electromagnetic Technology School of Electrical and Electronic Engineering Wuhan430074 China

The conventional discrete space vector modulation-based model predictive control (DSVM-MPC) strategies in linear induction machines (LIMs) have two problems, one is that the current harmonics and thrust ripple are large as accuracy of the voltage vector (VV) is insufficient under the limited computational burden, and the other is that the parameter robustness is poor. To solve these problems, an improved DSVM-MPC strategy with magnetizing inductance online identification method for LIMs is proposed. Firstly, an improved virtual VV discretization method and an optimal VV searching method are proposed, which can obtain more accurate VV with less computational burden compare to conventional DSVM-MPC strategies. Then, to improve the parameter robustness, a magnetizing inductance online identification method based on back electromotive force (EMF) is proposed, and a sliding mode observer (SMO) is designed to observe back EMF, which effectively avoids the current differential term. Furthermore, an adaptive compensation algorithm for cascaded low-pass filters is conceived to effectively suppress the inherent chattering of the SMO, and the amplitude and phase of the fundamental wave are appropriately compensated. Finally, the superiority of the proposed method is verified through comprehensive simulations and experiments on a 3kW LIM prototype. © 1986-2012 IEEE.

关键词： Low pass filters

来源：评论

学校读者我要写书评

暂无评论

Distribution network gray-start and emergency recovery strategy with pumped storage unit under a typhoon

引用

Global Energy Interconnection 2025年第1期8卷 121-133页

作者： Zhenguo Wang Hui Hou Chao Liu Shaohua Wang Zhengtian Li Xiangning Lin Te Li Research Institute of State Grid Zhejiang Electric Power Company Hangzhou 310014PR China School of Automation Wuhan University of TechnologyWuhan 430070PR China State Key Laboratory of Advanced Electromagnetic Engineering and Technology Huazhong University of Science and TechnologyWuhan 430074PR China

Typhoons can cause large-area blackouts or partial outages of distribution *** define a partial outage state in the distribution network as a gray state and propose a gray-start strategy and two-stage distribution network emergency recovery framework.A phase-space reconstruction and stacked integrated model for predicting wind and photovoltaic generation during typhoon disasters is proposed in the first *** provides guidance for second-stage post-disaster emergency recovery *** emergency recovery scheduling model is established in the second stage,and this model is supported by a thermal power-generating unit,mobile emergency generators,and distributed *** generation includes wind power generation,photovoltaics,fuel cells,***,we con-sider the gray-start based on the pumped storage unit to be an important first step in the emergency recovery *** model is val-idated on the improved IEEE 33 node system,which utilizes data from the 2022 super typhoon“Muifa”in Zhoushan,Zhejiang,*** indicate the superiority of a gray start with a pumped storage unit and the proposed emergency recovery strategy.

关键词： Wind and photovoltaic generation prediction Pumped storage unit Gray-start Distribution network Emergency recovery strategy

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：