检索结果-内蒙古大学图书馆

Analysis on the Performance of the SLIP Runner with Nonlinear Spring Leg

Chinese Journal of Mechanical Engineering 2013年第5期26卷 892-899页

作者： YU Haitao LI Mantian CAI Hegao State Key Laboratory of Robotics and System Harbin Institute of Technology

The spring-loaded inverted pendulum(SLIP) has been widely studied in both animals and ***,the majority of the relevant theoretical studies deal with elastic leg,the linear leg length-force relationship of which is obviously conflict with the biological observations.A planar spring-mass model with a nonlinear spring leg is presented to explore the intrinsic mechanism of legged locomotion with elastic *** leg model is formulated via decoupling the stiffness coefficient and exponent of the leg compression in order that the unified stiffness can be scaled as convex,concave as well as linear *** apex return map of the SLIP runner is established to investigate dynamical behavior of the fixed *** basin of attraction and Floquet Multiplier are introduced to evaluate the self-stability and initial state sensitivity of the SLIP model with different stiffness *** numerical results show that larger stiffness exponent can increase top speed of stable running and also can enlarge the size of attraction domain of the fixed *** addition,the parameter variation is conducted to detect the effect of parameter dependency,and demonstrates that on the fixed energy level and stiffness profile,the faster running speed with larger convergence rate of the stable fixed point under small local perturbation can be achieved via decreasing the angle of attack and increasing the stiffness *** perturbation recovery test is implemented to judge the ability of the model resisting large external *** result shows that the convex stiffness performs best in enhancing the robustness of SLIP runner negotiating irregular *** research sheds light on the running performance of the SLIP runner with nonlinear leg spring from a theoretical perspective,and also guides the design and control of the bio-inspired legged robot.

关键词： spring-loaded inverted pendulum legged locomotion apex return map nonlinear spring

来源：评论

学校读者我要写书评

暂无评论

Multi-state autonomous drilling for lunar exploration

引用

Chinese Journal of Aeronautics 2016年第5期29卷 1397-1404页

作者： Chen Chongbin Quan Qiquan Shi Xiaomeng Deng Zongquan Tang Dewei Jiang Shengyuan State Key Laboratory of Robotics and System Harbin Institute of Technology

Due to the lack of information of subsurface lunar regolith stratification which varies along depth, the drilling device may encounter lunar soil and lunar rock randomly in the drilling process. To meet the load safety requirements of unmanned sampling mission under limited orbital resources, the control strategy of autonomous drilling should adapt to the indeterminable lunar environments. Based on the analysis of two types of typical drilling media （i.e., lunar soil and lunar rock）, this paper proposes a multi-state control strategy for autonomous lunar drilling. To represent the working circumstances in the lunar subsurface and reduce the complexity of the control algo- rithm, lunar drilling process was categorized into three drilling states： the interface detection, initi- ation of drilling parameters for recognition and drilling medium recognition. Support vector machine （SVM） and continuous wavelet transform were employed for the online recognition of drilling media and interface, respectively. Finite state machine was utilized to control the transition among different drilling states. To verify the effectiveness of the multi-state control strategy, drilling experiments were implemented with multi-layered drilling media constructed by lunar soil simulant and lunar rock simulant. The results reveal that the multi-state control method is capable of detecting drilling state variation and adjusting drilling parameters timely under vibration interferences. The multi-state control method provides a feasible reference for the control of extraterrestrial autonomous drilling.

关键词： Finite state machine Recognition algorithm Simulants Support vector machine Wavelet transform

来源：评论

学校读者我要写书评

暂无评论

On Modeling Drilling Load in Lunar Regolith Simulant

引用

Chinese Journal of Mechanical Engineering 2018年第1期31卷 41-52页

作者： Qi-Quan Quan Chong-Bin Chen Zong-Quan Deng Jun-Yue Tang De-Wei Tang State Key Laboratory of Robotics and System Harbin Institute of Technology

Drilling and coring, as effective ways to obtain lunar regolith along the longitudinal direction, are widely applied in the lunar sampling field. Conventionally, modeling of drill-soil interaction was divided into soil cutting and screw conveyance processes, ignoring the differences in soil mechanical properties between them. To improve the modeling accuracy, a hypothesis that divides the drill-soil interaction into four parts: cuttings screw conveyance, cuttings extruding, cuttings bulldozing, and in situ simulant cutting, is proposed to establish a novel model based on the passive earth pressure theory. An iterative numerical calculation method is developed to predict the drilling loads. A drilling and coring testbed is developed to conduct experimental tests. Drilling experiments indicate that the drilling loads calculated by the proposed model match well the experimental results. The proposed research provides the instructions to adopt a suitable drilling strategy to match the rotary and penetrating motions, to increase the safety and reliability of drilling control in lunar sampling missions.

关键词： Lunar regolith drilling Lunar regolith simulant Drill-simulant interaction Screw conveyance

来源：评论

学校读者我要写书评

暂无评论

Crashworthiness Analysis on Alternative Square Honeycomb Structure under Axial Loading

引用

Chinese Journal of Mechanical Engineering 2013年第4期26卷 784-792页

作者： LI Meng DENG Zongquan GUO Hongwei LIU Rongqiang DING Beichen State Key Laboratory of Robotics and System Harbin Institute of Technology

Hexagonal metal honeycomb is widely used in energy absorption field for its special construction. However, many other metal honeycomb structures also show good energy absorption characteristics. Currently, most of the researches focus on hexagonal honeycomb, while few are performed into different honeycomb structures. Therefore, a new alternative square honeycomb is developed to expand the non-hexagonal metal honeycomb applications in the energy absorption fields with the aim of designing low mass and low volume energy absorbers. The finite element model of alternative square honeycomb is built to analyze its specific energy absorption property. As the diversity of honeycomb structure, the parameterized metal honeycomb finite element analysis program is conducted based on PCL language. That program can automatically create finite element model. Numerical results show that with the same foil thickness and cell length of metal honeycomb, the alternative square has better specific energy absorption than hexagonal honeycomb. Using response surface method, the mathematical formulas of honeycomb crashworthiness properties are obtained and optimization is done to get the maximum specific energy absorption property honeycomb. Optimal results demonstrate that to absorb same energy, alternative square honeycomb can save 10% volume of buffer structure than hexagonal honeycomb can do. This research is significant in providing technical support in the extended application of different honeycomb used as crashworthiness structures, and is absolutely essential in low volume and low mass energy absorber design.

关键词： crashworthiness alternative square honeycomb energy-absorption characteristic response surface methodology numerical simulation

来源：评论

学校读者我要写书评

暂无评论

Topology Structure Synthesis and Analysis of Spatial Pyramid Deployable Truss Structures for Satellite SAR Antenna

引用

Chinese Journal of Mechanical Engineering 2014年第4期27卷 683-692页

作者： WANG Yan DENG Zongquan LIU Rongqiang YANG Hui GUO Hongwei State Key Laboratory of Robotics and System Harbin Institute of Technology

Many attentions for structural synthesis are paid to planar linkages and parallel mechanisms, while design novel pyramid deployable truss structure（PDTS） of satellite SAR mainly depends on experience of designer. To design novel configuration of PDTS, a two-step topology structure synthesis and analysis approach is proposed. Firstly, a conceptual configuration of PDTS is synthesized. Weighted graph and weighted adjacency matrix are established to realize topological description for PDTS. Graph properties are then summarized to distinguish differentia between PDTS and other type structures. According to graph properties, a procedure for synthesis conceptual configuration of PDTS is presented. Secondly, join relationship of components in a PDTS is analyzed. Kinematic chain and corresponding incidence/adjacency matrix are employed to analyze join relationship of PDTS. Properties and simplified rules of kinematic chain are extracted to construct kinematic chain. A procedure for construction kinematic chain of PDTS is then established. Finally, with this two-step approach all 11 rectangular pyramid deployable structures whose folded state is planar are discovered and their kinematic chains are constructed. Based on synthesis results, a novel deployable support structure for satellite SAR is designed. The proposed research can be applied to obtain some novel PDTSs, which is of great importance to design some novel deployable support structures for satellite SAR antenna.

关键词： structural synthesis deployable truss structure spatial linkage graph theory SAR antenna

来源：评论

学校读者我要写书评

暂无评论

Drilling load modeling and validation based on the filling rate of auger flute in planetary sampling

引用

Chinese Journal of Aeronautics 2017年第1期30卷 434-446页

作者： Quan Qiquan Tang Junyue Yuan Fengpei Jiang Shengyuan Deng Zongquan State Key Laboratory of Robotics and System Harbin Institute of Technology

Some type of penetration into a subsurface is required in planetary sampling. Drilling and coring, due to its efficient penetrating and cuttings removal characteristics, has been widely applied in previous sampling missions. Given the complicated mechanical properties of a planetary regolith, suitable drilling parameters should be matched with different drilling formations ***, drilling faults caused by overloads could easily happen. Hence, it is necessary to establish a drilling load model, which is able to reveal the relationships among drilling loads, an auger＇s structural parameters, soil＇s mechanical properties, and relevant drilling parameters. A concept for the filling rate of auger flute（FRAF） is proposed to describe drilling conditions. If the FRAF index under one group of drilling parameters is less than 1, this means that the auger flute currently removes cuttings smoothly. Otherwise, the auger will be choked with compressed cuttings. In drilling operations, the drilling loads on the auger mainly come from the conveyance action, while the drilling loads on the drill bit primarily come from the cutting action. Experiments in one typical lunar regolith simulant indicate that the estimated drilling loads based on the FRAF coincide with the test results quite well. Based on this drilling load model, drilling parameters have been optimized.

关键词： Coring Drilling load Filling rate of auger fluteLunar regolith simulant Planetary drilling

来源：评论

学校读者我要写书评

暂无评论

Forces Acting on Submillimeter Spheres at the Air-Water Interface

引用

Chinese Physics Letters 2015年第11期32卷 97-100页

作者：王乐锋刘路徐慧超荣伟彬孙立宁 State Key Laboratory of Robotics and System Harbin Institute of Technology

The forces acting on submillimeter spheres at the air-water interface are investigated theoretically and experimentally. To calculate the capillary force acting on the sphere, an iterative method is used to determine the immersing position of the liquid interface on the sphere for a given distance. Then the total forces acting on the sphere are considered. The scaling effects of the net force acting on the sphere at the air-water interface are demonstrated. For the experiments, the force-position relationship of microspheres is measured with a precise electronic balance. The results show that the evaporation of the liquid in the container affects the measuring results greatly under ambient conditions. After considering the evaporation compensation, there is a great agree- ment between the theoretical and experimental results. Obvious hysteresis phenomena of the force-distance curve during the emersion processes are also observed and explained.

关键词： Forces Acting on Submillimeter Spheres at the Air-Water Interface

来源：评论

学校读者我要写书评

暂无评论

An optimization method for metamorphic mechanisms based on multidisciplinary design optimization

引用

Chinese Journal of Aeronautics 2014年第6期27卷 1612-1618页

作者： Zhang Wuxiang Wu Teng Ding Xilun State Key Laboratory of Robotics and System Harbin Institute of Technology Institute of Robotics Beihang University

The optimization of metamorphic mechanisms is different from that of the conventional mechanisms for its characteristics of multi-configuration. There exist complex coupled design variables and constraints in its multiple different configuration optimization models. To achieve the compatible optimized results of these coupled design variables, an optimization method for metamorphic mechanisms is developed in the paper based on the principle of multidisciplinary design optimization（MDO）. Firstly, the optimization characteristics of the metamorphic mechanism are summarized distinctly by proposing the classification of design variables and constraints as well as coupling interactions among its different configuration optimization models. Further, collaborative optimization technique which is used in MDO is adopted for achieving the overall optimization performance. The whole optimization process is then proposed by constructing a two-level hierarchical scheme with global optimizer and configuration optimizer loops. The method is demonstrated by optimizing a planar five-bar metamorphic mechanism which has two configurations,and results show that it can achieve coordinated optimization results for the same parameters in different configuration optimization models.

关键词： Configuration Mechanism Metamorphic mechanisms Method Multidisciplinary design optimization Optimization model

来源：评论

学校读者我要写书评

暂无评论

A Microgravity Simulation Experimental Platform For Small Space Robots In Orbit

arXiv

引用

arXiv 2025年

作者： Luo, Hang Zhou, Nanlin Zhang, Haoxiang Han, Kai Zhao, Ning Yang, Zhiyuan Qi, Jian Zhao, Sikai Zhao, Jie Zhu, Yanhe State Key Laboratory of Robotics and System Harbin Institute of Technology Harbin China

This study describes the development and validation of a novel microgravity experimental platform that is mainly applied to small robots such as modular self-reconfigurable robots. This platform mainly consists of an air supply system, a microporous platform and glass. By supplying air to the microporous platform to form an air film, the influence of the weight of the air foot and the ventilation hose of traditional air-float platforms on microgravity experiments is solved. The contribution of this work is to provide a platform with less external interference for microgravity simulation experiments on small robots. Copyright © 2025, The Authors. All rights reserved.

关键词： Microgravity processing

来源：评论

学校读者我要写书评

暂无评论

Method for optimizing manipulator's geometrical parameters and selecting reducers

引用

Journal of Central South University 2013年第5期20卷 1235-1244页

作者：杜志江肖永强董为 State Key Laboratory of Robotics and System Harbin Institute of Technology

A geometrical parameters optimization and reducers selection method was proposed for robotic manipulators design. The Lagrangian approach was employed in deriving the dynamic model of a two-DOF manipulator. The flexibility of links and joints was taken into account in the mechanical structure dimensions optimization and reducers selection, in which Timoshenko model was used to discretize the hollow links. Two criteria, i.e. maximization of fundamental frequency and minimization of self-mass/load ratio, were utilized to optimize the manipulators. The NSGA-II (fast elitist nondominated sorting genetic algorithms) was employed to solve the multi-objective optimization problem. How the joints flexibility affects the manipulators design was analyzed and shown in the numerical analysis example. The results indicate that simultaneous consideration of the joints and the links flexibility is very necessary for manipulators optimal design. Finally, several optimal combinations were provided. The effectiveness of the optimization method was proved by comparing with ADAMS simulation results. The self-mass/load ratio error of the two methods is within 10%. The maximum error of the natural frequency by the two methods is 23.74%. The method proposed in this work provides a fast and effective pathway for manipulator design and reducers selection.

关键词： robotic manipulator optimal design reducer selection flexible links flexible joints

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：