检索结果-内蒙古大学图书馆

SSRN 2022年

作者： Li, Guoqing Song, Yuheng Bian, Jing Wang, Yanxu Yan, Kefei Li, Menghan Key Laboratory of Modern Power System Simulation and Control & Renewable Energy Technology Ministry of Education Northeast Electric Power University JL Jilin132012 China Baoding Power Supply Company of State Grid Jilin Electric Power Co. Ltd HB 071000 China

Given the wide application of DC grids, the relevant protection equipment of power grids must be improved during the fault period. This study proposes an integrated multiport flexible voltage clamp circuit breaker with a DC chopper, acting on the receiving end converter, which can solve the DC short circuit fault and surplus power because of a low voltage fault. As a DC circuit breaker, the branch outputs different levels of voltage by selecting different gears based on the rising trend of fault current. The voltage clamping principle and thyristor semi-control are used to remove the fault, and the voltage-clamped branch forms an LC oscillation circuit with the fault point, and the thyristors turn off when crossing zero. Then, using the flow direction of the capacitive current based on reclosing, turn on the reverse thyristors and determine the fault type. The number of input sub modules is changed by low-voltage level detection as a DC chopper to assist AC low-voltage fault ride through such that the voltage at both ends of the energy dissipation resistance changes, which can consume the surplus power from the sending end converter and minimize the impact of low-voltage fault on the power transmission capacity of the system. Finally, the validity and applicability of the three terminal DC network models in PSCAD/EMTDC is confirmed, and the two types of faults are analyzed. Through fault current, system voltage, branch voltage comparison, and AC side power transmission analysis, the equipment can replace multiple conventional circuit breakers and traditional energy-consuming equipment, further expanding the economy of the DC system. © 2022, The Authors. All rights reserved.

关键词： Electric circuit breakers

来源：评论

学校读者我要写书评

暂无评论

Influence Analysis of Thermal states on Dynamic Frequency Response for power systems with High Renewables

Influence Analysis of Thermal States on Dynamic Frequency Re...

引用

2020 IEEE Sustainable power and Energy Conference, iSPEC 2020

作者： Cao, Yongji Zhang, Hengxu Li, Changgang Sun, Leshu Li, Chen Qin, Hao Guo, Qi Zhu, Yihua Key Laboratory of Power System Intelligent Dispatch and Control of the Ministry of Education Shandong University Jinan250061 China State Key Laboratory of HVDC Electric Power Research Institute National Energy Power Grid Technology RD Centre Guangdong Provincial Key Laboratory of Intelligent Operation and Control for New Energy Power System CSG Key Laboratory for Power System Simulation Electric Power Research Institute China Southern Power Grid Guangzhou510663 China

ISBN: (纸本)9781728191645

As thermal generators are substituted by renewables, the power reserves are decreasing and the influence of boiler thermal states on frequency dynamics becomes more severe. The variations of thermal states can aggravate dynamic frequency response, especially for power systems with high renewables. However, the system frequency response (SFR) model has been widely adopted, but in which the thermal states are neglected. This paper analyzes the influence of thermal states on dynamic frequency response quantitatively. The modified SFR models are built by extending the boiler models with different simplification degrees. Then, from the view of the response amplitude and time, the quantitative indices are established to measure the response trajectories of modified SFR models. And the characteristics of frequency dynamics and the statistic indices of data sequences are utilized to analyze the influences of thermal states and assess the performances of modified SFR models. According to the results of comparative analysis, the neglect of thermal states incurs more optimistic frequency dynamics and impairs the frequency stability of power systems with high renewables. Additionally, the accuracy of the SFR model can be enhanced even with the most simplified boiler model. © 2020 IEEE.

关键词： Frequency response

来源：评论

学校读者我要写书评

暂无评论

A convex hull based intertemporal loadability set approximation method

A convex hull based intertemporal loadability set approximat...

引用

2020 Tsinghua - HUST-IET Electrical Engineering Academic Forum

作者： Yan, Xinfei Zhong, Haiwang Tan, Zhenfei Yang, Junfeng Dept. Electrical Engineering Tsinghua University Beijing China State Key Laboratory of Control and Simulation of Power Systems and Generation Equipments Beijing China Power Dispatch and Control Center State Grid Corp. of China Beijing China

ISBN: (纸本)9781839533914

The uncertainty of renewable energy sources has aroused the interests in depicting the ability of power systems to accommodate the variations. Loadability set is one of the typical methods to characterize the feasible sets of power systems with uncertainties. The existing literature on loadability set do not incorporate intertemporal constraints, while for some cases like security check, intertemporal constraints are necessary and important. This paper firstly adapts loadability set to security check, enabling it to depict the capability of power systems to accommodate load variations. Singular value decomposition (SVD) and progressive vertex enumeration (PVE) are introduced to lighten the computational burden caused by multiple periods. The computational time can be traded off with the precision of approximation to the loadability set. Case studies verify that the loadability set can be approximated with proper precision. © 2020 Institution of Engineering and Technology. All rights reserved.

关键词： Singular value decomposition

来源：评论

学校读者我要写书评

暂无评论

Capacity Configuration of Hybrid CSP/PV Plant for Economical Application of Solar Energy

引用

Chinese Journal of Electrical Engineering 2020年第2期6卷 19-29页

作者： Fei Li Canbing Li Kai Sun Jiamei Zhang Hua Li State Grid Henan Electric Power Company Economic Research Institute Zhengzhou 450000China College of Electrical and Information Engineering Hunan UniversityChangsha 410082China Department of Electrical Engineering Shanghai Jiao Tong UniversityShanghai 200240China State Key Lab of Control and Simulation of Power Systems and Generation Equipment Tsinghua UniversityBeijing 100084China Zhangjiakou Power Supply Company Zhangjiakou 075000China

Concentrating solar power(CSP)technology has received increasing attention in recent years because of its distinct advantage for dispatchable power generation from solar ***,owing to its highly levelized costs of electricity,CSP plants are less competitive than photovoltaic(PV)power *** overcome this drawback and suppress PV power fluctuations,the concept of a hybrid CSP/PV power plant is proposed and developed.A capacity configuration method based on filtering and checking is proposed to seek a relationship between the capacity configuration of a hybrid CSP/PV system and the cost of solar ***-content hybrid systems with different ratios of CSP capacity and PV capacity are modeled,and their comprehensive performance is *** and comparisons with a standalone CSP system focused on annual energy generation,capacity factor,levelized cost of electricity,and possibility for loss of power supply show that the hybrid CSP/PV systems possess different features depending on their capacity *** results indicate that the proposed method can supply a convenient and simple operation pattern that favors engineering utilization and extension.

关键词： Concentrating solar power photovoltaic capacity configuration levelized cost of electricity

来源：评论

学校读者我要写书评

暂无评论

power Reconstructing Method of Distributed Photovoltaic Based on the Temporal and Spatial Correlation 10

Power Reconstructing Method of Distributed Photovoltaic Base...

引用

2020 10th International Conference on power, Energy and Electrical Engineering, CPEEE 2020

作者： Li, Shangqiang Sun, Rongfu Qiao, Ying Lu, Zongxiang State Key Lab of Control and Simulation of Power Systems and Generation Equipment Department of Electrical Engineering Tsinghua University Haidian District in Beijing100084 China State Grid Jibei Electric Power Company Xicheng District in Beijing100031 China

55GW distributed photovoltaic have been installed in China, but nearly half are connected to the low voltage level of 380V, without real-time power data acquisition. The sequential power data is needed to be reconstructed based on some related monitoring data. Current researches focus on outliers recovery, but not reconstruction from none. This paper explores the temporal and spatial correlation of power between adjacent centralized photovoltaic stations and proposes a large-scale missing power data reconstructing method based on the time-delay power correlation, the spatial geometric characteristics of stations and the thought of ensemble learning. Finally, we verify the effectiveness of the proposed method by simulation based on the real photovoltaic power data. The proposed method can get the better effect of data reconstructing compared with the traditional method, which only use the power curves of the nearest CP station to reconstruct the power curves of the DP station according the capacity conversion. © 2020 The Authors, published by EDP Sciences.

关键词： Data acquisition

来源：评论

学校读者我要写书评

暂无评论

Hardware in Loop Real-Time simulation Test Research and Engineering Application of Multi-Terminal Hybrid Ultra High Voltage DC Current control and Protection system

Hardware in Loop Real-Time Simulation Test Research and Engi...

引用

Sustainable power and Energy Conference (iSPEC)

作者： Qinlei Chen Qi Guo Xuehua Lin Shuyong Li Libin Huang Deyang Chen Zhijiang Liu Chao Luo Guanming Zeng Yuanhong Lu Electric Power Research Institute China Southern Power Grid Guangzhou China State Key Laboratory of HVDC China Southern Power Grid Guangzhou China CSG Key Laboratory for Power System Simulation China Southern Power Grid Guangzhou China National Energy Power Grid Technology R&D Centre China Southern Power Grid Guangzhou China Guangdong Provincial Key Laboratory of Intelligent Operation and Control for New Energy Power System China Southern Power Grid Guangzhou China

ISBN: (纸本)9781665485234

The multi-terminal hybrid ultra-high voltage direct current (MTH-UHVDC) transmission technology combining line commuted converter ultra-high voltage direct current (LCC-UHVDC) technology and modular multilevel converter ultra-high voltage direct current (MMC-UHVDC), provides a more flexible and advanced mode to meet the needs of longer distance and larger capacity clean energy transmission. Compared with the two-end HVDC system, the control and protection (C&P) functional and dynamic characteristics of MTH-UHVDC transmission system are more complex. The real-time simulation technology must be used to carry out the experimental research before the engineering application. However, the hardware in loop (HIL) real-time simulation test of MTH-UHVDC transmission system is faced with many technical problems, such as multi-type interface of test system, accurate modeling of UHVDC MMC valve, full access of C&P devices, etc. Therefore, from the perspective of simulation test research and engineering application, this paper proposes a HIL real-time simulation test method for C&P system of MTH-UHVDC transmission system. The design of test system, accurate modeling of primary system, modeling of C&P system, interface technology of test system, functional and performance test method of C&P system and engineering application are deeply studied. Taking kunliulong project, the world’s first MTH-UHVDC project, as the application background, a real-time simulation test system for C&P system is established by the proposed method. The functional performance test (FPT) and dynamic performance test (DPT) are carried out using the established test system, and the simulation test waveforms are compared with the field test waveforms. The results show that the response characteristics of the two systems are consistent, and the test system established in this paper can meet the needs of accurate real-time simulation test and research, and can provide technical support for the application of M

关键词： Performance evaluation Current control Multilevel converters HVDC transmission High-voltage techniques systems modeling Valves

来源：评论

学校读者我要写书评

暂无评论

Design and Application Research of Synchronous Temporary Block Function between Valve Groups on Modular Multilevel Converter Ultra High Voltage Direct Current system

Design and Application Research of Synchronous Temporary Blo...

引用

Sustainable power and Energy Conference (iSPEC)

作者： Qinlei Chen Xuehua Lin Zhijiang Liu Qi Guo Libin Huang Guanming Zeng Shuyong Li Deyang Chen Chao Luo Electric Power Research Institute China Southern Power Grid Guangzhou China CSG Key Laboratory for Power System Simulation China Southern Power Grid Guangzhou China State Key Laboratory of HVDC China Southern Power Grid Guangzhou China Guangdong Provincial Key Laboratory of Intelligent Operation and Control for New Energy Power System China Southern Power Grid Guangzhou China National Energy Power Grid Technology R&D Centre China Southern Power Grid Guangzhou China

ISBN: (纸本)9781665485234

Compared with the half controlled power electronic devices such as thyristor, the over-current ability of fully controlled power electronic devices such as insulated gate bipolar transistor (IGBT) is weak. In order to ensure that bridge arm current does not exceed the bearing range of modular multilevel converter (MMC) switching devices under AC fault ride through and other scenarios, MMC high voltage direct current (HVDC) system projects are equipped with temporary block (TB) function, IGBTs are protected by suspending the trigger pulse before bridge arm current reaches the maximum safe current of the switch. The structure of high side and low side valve group (VG) in series are adopted in ultra high voltage direct current (UHVDC) system. For line commuted converter (LCC) UHVDC system, the converter is current source type, During normal operation, there is no need to control the voltage balance between high side and low side VG, and after one VG is disturbed by commutation failure, the impact on another VG is relatively small. For MMC-UHVDC system, the converter is voltage source type, during normal operation, the voltage balance between high side and low side VG should be controlled. When a transient disturbance such as AC fault occurs, if one VG is temporary blocked due to bridge arm over-current, and another VG is not temporary blocked or the time of temporary blocked is later, the VG blocked first may tripped due to sub-module (SM) overall over-voltage or bridge arm over-current, and the scope of the accident is expanded, which is not conducive to the flexible and reliable operation of MMC-UHVDC. Therefore, the impact of non synchronous temporary block of MMC-UHVDC VGs is firstly analyzed in this paper, and then synchronous temporary block (STB) function between VGs is proposed, and the hardware interface scheme, STB signal sending and receiving logic, enable conditions and other aspects between VGs are elaborated. Finally, taking kunliulong project, the world’

关键词： Insulated gate bipolar transistors Multilevel converters Bridge circuits High-voltage techniques Switches Valves Real-time systems

来源：评论

学校读者我要写书评

暂无评论

Applications of MXenes in human-like sensors and actuators

引用

Nano Research 2023年第4期16卷 5767-5795页

作者： Jinbo Pang Songang Peng Chongyang Hou Xiao Wang Ting Wang Yu Cao Weijia Zhou Ding Sun Kai Wang Mark H.Rümmeli Gianaurelio Cuniberti Hong Liu Institute for Advanced Interdisciplinary Research(iAIR) Collaborative Innovation Center of Technology and Equipment for Biological Diagnosis and Therapy in Universities of ShandongUniversity of JinanJinan 250022China Institute for Materials Science and Max Bergmann Center of Biomaterials Technische Universität DresdenDresden 01069Germany Center for Advancing Electronics Dresden Technische Universität DresdenDresden 01069Germany Dresden Center for Computational Materials Science Technische Universität DresdenDresden 01062Germany Dresden Center for Intelligent Materials(GCL DCIM) Technische Universität DresdenDresden 01062Germany High-Frequency High-Voltage Device and Integrated Circuits R&D Center Institute of MicroelectronicsChinese Academy of SciencesBeijing 100029China Key Laboratory of Microelectronic Devices&Integrated Technology Institute of MicroelectronicsChinese Academy of SciencesBeijing 100029China Shenzhen Key Laboratory of Nanobiomechanics Shenzhen Institute of Advanced TechnologyChinese Academy of SciencesShenzhen 518055China State Key Laboratory of Biobased Material and Green Papermaking Qilu University of TechnologyShandong Academy of SciencesJinan 250353China School of Bioengineering Qilu University of TechnologyShandong Academy of ScienceJinan 250353China Key Laboratory of Modern Power System Simulation and Control&Renewable Energy Technology(Ministry of Education) Northeast Electric Power UniversityJilin 132012China School of Electrical Engineering Northeast Electric Power UniversityJilin 132012China School of Electrical Engineering Weihai Innovation Research InstituteQingdao UniversityQingdao 266000China School of Electrical and Computer Engineering Jilin Jianzhu UniversityChangchun 130118China Institute for Complex Materials Leibniz Institute for Solid State and Materials Research Dresden(IFW Dresden)20 Helmholtz StrasseDresden 01069Germany College of Energy Soochow Institute for Energy and Materials Innovations Soochow UniversitySuzhou 215006China Key L

Human beings perceive the world through the senses of sight,hearing,smell,taste,touch,space,and *** first five senses are prerequisites for people to *** sensing organs upload information to the nervous systems,including the brain,for interpreting the surrounding ***,the brain sends commands to muscles reflexively to react to stimuli,including light,gas,chemicals,sound,and ***,as an emerging two-dimensional material,has been intensively adopted in the applications of various sensors and *** this review,we update the sensors to mimic five primary senses and actuators for stimulating muscles,which employ MXene-based film,membrane,and composite with other functional ***,a brief introduction is delivered for the structure,properties,and synthesis methods of ***,we feed the readers the recent reports on the MXene-derived image sensors as artificial retinas,gas sensors,chemical biosensors,acoustic devices,and tactile sensors for electronic ***,the actuators of MXene-based composite are ***,future opportunities are given to MXene research based on the requirements of artificial intelligence and humanoid robot,which may induce prospects in accompanying healthcare and biomedical engineering applications.

关键词： MXenes sensors actuators gas sensors biosensors tactile sensors sound sensors artificial retina

来源：评论

学校读者我要写书评

暂无评论

Excellent electrical properties of zinc-oxide varistors by tailoring sintering process for optimizing line-arrester configuration 7

Excellent electrical properties of zinc-oxide varistors by t...

引用

7th IEEE International Conference on High Voltage Engineering and Application, ICHVE 2020

作者： Meng, Pengfei Cao, Wei Chen, Chao Wan, Shuai Xu, Heng Hu, Jun He, Jinliang Tsinghua University Department of Electrical Engineering Beijing China Wuhan Nari Limited Liability Company State Grid Electric Power Research Institute Wuhan China Guangdong Aikang Electric Power Co. Ltd Guangzhou China State Key Laboratory of Control and Simulation of Power System and Generation Equipment Tsinghua University Department of Electrical Engineering Beijing China

ISBN: (纸本)9781728155111

We optimized the excellent electrical performance of zinc-oxide (ZnO) varistors doping of aluminum and indium by tailoring the sintering process. The surface morphology, nonlinear volt ampere properties, capacitance-voltage characteristics, and dielectric analyses were carried out. At a given aluminum and indium concentration, the average sample grain size (d) increased as lengthening sintering time from 0.5 to 2.5 h. The voltage gradient (E_{1\{mA}}) decreased from 602.4 V/mm to 356.7 V/mm. The residual voltage of the sintered varistors at the lightning impulse current (8/20\ \mu\mathrm{s}) decreased as the samples sintering holding time extended from 0.5 to 2.0 h. When the ZnO varistor was sintered for 1.5 h, the samples showed an excellent performance, with a reference voltage of 479.3 V/mm at 1 mA DC. When assembled in the line surge arresters, the obtained high-voltage-gradient ZnO varistors can decrease their length and residual voltage, which allows for better coordination of the line surge arrester with the insulators. This study has great significance to optimize line-arrester configurations and improve power-system stability. © 2020 IEEE.

关键词： Sintering

来源：评论

学校读者我要写书评

暂无评论

Research on Lithium-ion Battery Safety Risk Assessment Based on Measured Information

Research on Lithium-ion Battery Safety Risk Assessment Based...

引用

2020 IEEE Sustainable power and Energy Conference, iSPEC 2020

作者： Zhou, Xuyan Cheng, Lin Wan, Yuxiang Qi, Ning Tian, Liting You, Feng State Key Laboratory of Control and Simulation of Power Systems and Generation Equipments Tsinghua University Beijing China Energy Storage System Business Unite Tianjin Lishen Battery Joint-Stock Co. Ltd. Tianjin China

ISBN: (纸本)9781728191645

Lithium-ion batteries have the advantages of high energy density, fast power response, recyclability, and convenient to movement, which are unsurpassed by other energy storage systems. However, safety issues such as thermal runaway of lithium-ion batteries have become the main bottlenecks restricting the development of their extensive applications. In practical applications, the demand for battery energy storage scale and specific energy continues to increase, and the contradiction between battery high safety and battery safety has become increasingly prominent. This paper proposes a lithium-ion battery safety risk assessment method based on online information. Effective predictions are essiential to avoid irreversible damage to the battery and ensure the safe operation of the battery energy storage system before a failure occurs. This paper is expected to provide novel risk assessment method and research idea for the development and design of high-safety battery systems. © 2020 IEEE.

关键词： Lithium-ion batteries

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：