检索结果-内蒙古大学图书馆

High-strength,electrically insulated industrial meta-aramid paper reinforced with polyethylene terephthalate microfibre pulp in a sandwich structure

引用

High Voltage 2024年第6期9卷 1402-1413页

作者： Meijun Chen Songjun Yao Guobin Zhu Mengyun Wu Zhiying Li Siwei Xiong Shiwen Yang Hua Wang Liangbo Zhu Luoxin Wang State Key Laboratory of New Textile Materials&Advanced Processing Technology College of Materials Science and EngineeringWuhan Textile UniversityWuhanChina High-Tech Organic Fibers Key Laboratory of Sichuan Province ChengduSichuanChina

The weak interfacial strength and porous structure of the meso-aramid paper cause mechanical and insulating *** density,regulating pore structure,and improving interfacial interactions of meso-aramid are crucial for promoting the perfor-mance of meso-aramid papers.A PMIA/polyethylene terephthalate(PET)composite paper was prepared using the wet method with meso-aramid short cut fibres(PMIA)and PET pulp as raw *** sandwich-structured PMIA/PET paper was achieved by covering PET microfiber non-wovens served as the surface layer while the PMIA/PET composite paper acted as the core *** the high-temperature hot pressing process,the PET pulp transformed into a viscous melt that coated on aramid fibres in between layers,forming a typical‘reinforced concrete’interface structure within the core layer of the PMIA/PET composite *** PET non-wovens on top and bottom surfaces were converted into a dense PET film that filled and covered the holes and defects in the PMIA/PET composite *** unique structure enabled the sandwich-structured PMIA/PET composite paper to exhibit excellent tensile strength(80.41 N/cm)and breakdown strength(56.35 kV/mm),surpassing most reported performances of meso-aramid papers in *** work not only provides novel insights for pre-paring high-performance meso-aramid papers,but also shows potential applications for other materials and structures.

关键词： strength structure sandwich

来源：评论

学校读者我要写书评

暂无评论

Pearl-Inspired Colored Carbon Fibers with Electromagnetic Interference and Optical Camoufage Properties

引用

Energy & Environmental materials 2025年第2期8卷 324-333页

作者： Annan He Yuxin Luo Mengqi Wang Yu Zhang Zhiyu Huang Yong Qin Qing Li Shichao Zhao Fengxiang Chen Weilin Xu State Key Laboratory of New Textile Materials and Advanced Processing Technologies Hubei Key Laboratory of Digital Textile Equipment and National Local Joint Laboratory for Advanced Textile Processing and Clean Production Wuhan Textile University State Key Laboratory of Coal Conversion Institute of Coal ChemistryChinese Academy of Sciences

Carbon fibers（CFs） are widely used in cutting-edge and civilian fields due to their excellent comprehensive properties such as high strength and high modulus,superior corrosion and friction resistances,excellent thermal stability,light weight,and high electrical ***,their natural ultra-black appearance is difficult to meet the aesthetic needs of today' s civilian sector and the need for optical stealth in the military *** addition,conventional coloring methods are difficult to effectively adhere to CF surfaces due to high crystallinity and highly inert surface caused by their graphite-like *** this work,inspired by the nacre structural color of pearls,colored CFs with 1D photonic crystal structure are prepared by cyclically depositing amorphous（Al2O3+TiO2） layers on the surface of carbon CFs through atomic layer deposition（ALD）.The obtained CFs exhibit brilliant colors and excellent environmental durability in extreme ***,the colored CFs also exhibit high EMI shielding effectiveness（45 dB） and optical stealth properties,which can be used in emerging optical devices and electromagnetic and optical stealth equipment.

关键词： atomic layer deposition carbon fiber electromagnetic interference 1D photonic crystal structural color

来源：评论

学校读者我要写书评

暂无评论

Engineering eg filling of RuO_(2)enables a robust and stable acidic water oxidation

引用

Chinese Chemical Letters 2025年第3期36卷 444-448页

作者： Qing Li Yumei Feng Yingjie Yu Yazhou Chen Yuhua Xie Fang Luo Zehui Yang State Key Laboratory of New Textile Materials&Advanced Processing Technology College of Materials Science and EngineeringWuhan Textile UniversityWuhan 430200China Faculty of Materials Science and Chemistry China University of Geosciences WuhanWuhan 430074China

Efficient and stable electrocatalyst for oxygen evolution reaction(OER)in acidic environment is vital for polymer electrolyte membrane water electrolysis(PEMWE).In this work,we have devised the formation of heterostructured RuO_(2)/MnO_(2)with nanoflower structure for acidic OER *** to commercial RuO_(2),the overpotential at 50mA/cm^(2)is decreased by 36 mV,corresponding to a 3.7-fold better mass *** boosted acidic OER performance is attributed to the heterostructure inducing more electrons are filled in e_(g)orbital of Ru atom triggering a better deprotonation of bridge oxygen atom in Ru-O_(bri)-Mn structure evidenced by pH-independent cyclic voltammetry ***,RuO_(2)/MnO_(2)sustains its acidic OER activity within 20 h,longer than commercial RuO_(2).The membrane electrode assembly(MEA)test suggests than only 2.18 V is required to achieve a current density of 5 A/cm^(2).The theoretical calculation reveals that the e_(g)filling of Ru atom is increased from 2.18 to 2.39 after MnO_(2)incorporation,reducing the energy for the formation of∗OOH moiety.

关键词： Oxygen evolution reaction Polymer electrolyte membrane water electrolysis Deprotonation e_(g)filling Heterostructure

来源：评论

学校读者我要写书评

暂无评论

Atomically dispersed Ni electrocatalyst for superior urea-assisted water splitting

引用

Journal of Energy Chemistry 2024年第3期90卷 1-6,I0002页

作者： Fang Luo Shuyuan Pan Yuhua Xie Chen Li Yingjie Yu Zehui Yang College of Materials Science and Engineering State Key Laboratory of New Textile Materials&Advanced Processing TechnologyWuhan Textile UniversityWuhan 430200China Hubei Hydrogen Energy Technology Innovation Center Faculty of Materials Science and ChemistryChina University of GeosciencesWuhan 430074HubeiChina

Urea oxidation reaction(UOR) has been selected as substitution for oxygen evolution reaction ascribing to its low thermodynamic voltage as well as utilization of nickel as ***,we report the formation of nickel single atoms(Ni-SAs) as exceptional bifunctional electrocatalyst toward UOR and hydrogen evolution reaction(HER) in urea-assisted water *** UOR catalysis,Ni-SAs perform a superior catalytic performance than Ni-NP/NC and Pt/C ascribing to the formation of HOO-Ni-N_(4) structure evidenced by in-situ Raman spectroscopy,corresponding to a boosted mass activity by 175-fold at 1.4 V *** than Ni-NP/***,Ni-SAs requires only 450 mV overpotential to obtain HER current density of 500 mA cm^(-2).136 mA cm^(-2) is achieved in urea-assisted water splitting at1.7 V for Ni-SAs,boosted by 5.7 times than Pt/C-IrO_(2) driven water splitting.

关键词： Urea oxidation reaction Hydrogen evolution reaction Nickel single atoms Water splitting

来源：评论

学校读者我要写书评

暂无评论

Liquid metal-based textiles for smart clothes

引用

Science China(Technological Sciences) 2023年第6期66卷 1511-1529页

作者： BIE BingLin XU WeiLin LV YongGang State Key Laboratory of New Textile Materials and Advanced Processing Technologies Wuhan Textile UniversityWuhan 430200China

The smart clothes emerge as a new generation of garments developed in the scientific and industrial communities,gaining increasing attention due to the real-time responses to exterior environments or *** to the unique merits of liquid metal(LM)such as excellent fluidity,high conductivity and intrinsic stretchability in ambient environment,LM-based smart textiles are widely applied in chemical sensors,wearable electronics and stretchable *** review is dedicated to summarizing different preparation methods and functions of LM-based textiles(LMTs)for smart clothes,which consists of the design principles,the fabrication strategies,the working mechanism of LMTs,and the tremendous applications sorted by the features of *** methods of the synthesis to build LMTs are divided into two domains classified by spatial *** strategy is the exterior decoration with LM,while the other is interior encapsulation of ***,the primary applications of LMT-based smart clothes have been illustrated through the utilization of the properties of LM *** categorization of LMTs aims to facilitate further investigation and research in the future development of LM-based smart ***,future prospects and opportunities of LMT-based smart clothes are discussed in this area.

关键词： liquid metal-based textiles smart clothes wearable electronic devices phase transition energy harvesting and storage

来源：评论

学校读者我要写书评

暂无评论

Multiphase reaction spinning of high-temperature resistant weavable SiO_(2)-Kevlar hybrid aerogel fibers

引用

Nano Research 2025年第1期18卷 424-433页

作者： Yunna Chen Wenlu Zhang Qingyang Li Wenbin Li Chong He School of Textile Science and Engineering Wuhan Textile UniversityWuhan 430200China State Key Laboratory of New Textile Materials and Advanced Processing Technologies Wuhan Textile UniversityWuhan 430200China

advanced aerogel fibers possess numerousadvantages amalgamating the attributes of aerogels and fibermaterials, rendering them invaluable in the realm of thermalmanagement and regulation. However, the achievement ofrobust mechanical properties and increased temperaturestability is still a major challenge for the majority of aerogelfibers. Herein, SiO_(2)-Kevlar hybrid aerogel fibers with bioniccore-shell structure were prepared by reaction spinning andweaved into fabric. Kevlar nanowires dispersion is pumpedinto a bath comprising a self-synthesized silica sol, whichfacilitates the hybridization of biphasic aerogels through thegel reaction. Precise control over the diameter (200-800 μm)and structure of the wet gel fibers was achieved throughmeticulous adjustment of the spinning solution composition and spinning parameters. Subsequent freeze-drying processfacilitates the formation of a core-shell hybrid structure, in which the SiO_(2) aerogel layer effectively encapsulate the Kevlaraerogel core fiber. Taking full advantage of the mechanical properties of the Kevlar core fiber, the resulting SiO_(2)-Kevlaraerogel fibers exhibit commendable weaving characteristics (51.8 MPa). Furthermore, SiO_(2)-Kevlar aerogel fabrics exhibitenhanced thermal insulation characteristics with a thermal conductivity of 0.037 W/(m·K). As a result of the presence ofexternal SiO_(2) aerogel layer, the overall temperature resistance performance of the SiO_(2)-Kevlar fabric reach up to 700 ℃.

关键词： aerogel fibers SiO_(2)aerogel Kevlar aerogel reaction spinning thermal protective performance

来源：评论

学校读者我要写书评

暂无评论

The superior ballistic performance of highly stretchable and flexible double-face knitted fabrics(DFKF):An experimental investigation

引用

Defence technology(防务技术) 2025年第3期45卷 119-136页

作者： Yi Zhou Xiangpeng Xin Yang Li Yang Zhou Rui Zhang Lizhi Xu State Key Laboratory of New Textile Materials and Advanced Processing Technologies Wuhan Textile UniversityWuhan 430200China School of Mechanical Engineering Nanjing University of Science and TechnologyNanjing 210094China

When the protective and protected systems are detached,the former can be allowed to absorb the kinetic energy of the impacting projectile through large deformation without considering the back face signature of the *** paper presents a novel double-face knitted fabric(DFKF)designed for this very impacting *** tests equipped with high-speed camera were used to characterize the ballistic performance with the impact velocities ranging from 100 m/s to 450 m/*** results showed that the ballistic limits(V_(bl))of DFKF are approximately triple and double that of its counterpart UD and plain fabrics,*** mass-normalized metrics,the specific energy absorption(SEA)is 250%and 350%greater than the UD and plain fabrics at their corresponding V_(bl)*** quasi-static tests showed that the DFKF displayed greater resilience,crease recovery properties,and flexibility,which also made it an especially better candidate than UD and plain weaves for the design of umbrella surface *** was also found that DFKF is dependent on yarn count and the incorporation of spandex.A prototype anti-ballistic umbrella is manufactured using DFKF made of 200D multi-filament *** ballistic performance is also sensitive to the impact site when the umbrella is subjected to impact.

关键词： DFKF Ballistic performance SEA Resilience Energy absorption Anti-ballistic umbrella

来源：评论

学校读者我要写书评

暂无评论

The impact of the coupling relationship between projectile size and yarn dimension on the ballistic performance of plain weave fabric

引用

Defence technology(防务技术) 2025年第1期43卷 288-303页

作者： Kaiying Wang Xuan Zhou Wenke Ren Yiding Wu Yilei Yu Yi Zhou Lizhi Xu Guangfa Gao School of Mechanical Engineering Nanjing University of Science and TechnologyNanjing210094China State Key Laboratory of New Textile Materials and Advanced Processing Technologies Wuhan Textile UniversityWuhan430079China

Aramid fibers,due to their relatively high inter-yarn friction,high strength,high modulus,and other characteristics,have become a typical representative of flexible anti-ballistic materials in modern *** research on the anti-penetration of aramid fabrics mostly focuses unilaterally on the structure and performance of aramid fabrics or the shape and size of projectiles,with fewer studies on the coupled effect of both on ballistic *** study analyzes how the coupling relationship(or size effect)between the projectile and fiber bundle dimensions affects the fabric ballistic performance from a mesoscopic scale *** plain weave aramid fabric as the research object,considering different diameter projectiles,through a large number of ballistic impact tests and numerical simulations,parameters such as ballistic limit velocity,average energy absorption of fabric,and specific energy absorption ratio(average energy absorption of fabric divided by projectile cross-sectional area)are obtained for ballistic performance *** influence law of projectile size on the ballistic performance of high-performance fabrics is as follows:The relative range of fitted ballistic limit velocity at different target positions gradually decreases and then stabilizes as the projectile diameter increases,indicating that the fabric structure effect gradually disappears at a projectile diameter of 12 mm;The average ballistic limit velocity at three impact positions,P1,P2,and P3,provides the corresponding ballistic limit velocity for 1000D aramid fabric,which increases with projectile diameter but the rate of increase slows down at an inflection point,which in this study occurs where the fabric structure effect nearly disappears at a projectile diameter of 12 mm;The energy absorption ratio increases and then decreases as the projectile diameter increases from 4 mm to 20 mm,reaching a peak at the diameter of 12 mm due to the gradual disappearance of the fabri

关键词： Plain weave fabric Ballistic performance Aramid fiber Projectile size Ballistic experiment

来源：评论

学校读者我要写书评

暂无评论

Self-actuating protection mechanisms for safer lithium-ion batteries

引用

Journal of Energy Chemistry 2024年第7期94卷 181-198页

作者： Yang Luo Chunchun Sang Kehan Le Hao Chen Hui Li Xinping Ai Hubei Key Lab of Electrochemical Power Sources College of Chemistry&Molecular ScienceWuhan UniversityWuhan 430072HubeiChina state Key Laboratory of New Textile Materials&Advanced Processing Technologies Wuhan Textile UniversityWuhan 430200HubeiChina

Safety issue is still a problem nowadays for the large-scale application of lithium-ion batteries(LIBs)in electric vehicles and energy storage *** unsafe behaviors of LIBs arise from the thermal run-away,which is intrinsically triggered by the overcharging and *** improve the safety of LIBs,various protection strategies based on self-actuating reaction control mechanisms(SRCMs)have been proposed,including redox shuttle,polymerizable monomer additive,potential-sensitive separator,thermal shutdown separator,positive-temperature-coefficient electrode,thermally polymerizable addi-tive,and reversible thermal phase transition *** build-in protection mechanisms,these meth-ods can sensitively detect either the temperature change inside battery or the potential change of the electrode,and spontaneously shut down the electrode reaction at risky conditions,thus preventing the battery from going into thermal *** their advantages in enhancing the intrinsic safety of LIBs,this paper overviews the research progresses of SRCMs after a brief introduction of thermal runaway mechanism and limitations of conventional thermal runaway mitigating *** importantly,the current states and issues,key challenges,and future developing trends of SRCTs are also discussed and outlined from the viewpoint of practical application,aiming at providing insights and guidance for developing more effective SRCMs for LIBs.

关键词： Li-ion battery Safety Thermal runaway Thermal protection Overcharge protection

来源：评论

学校读者我要写书评

暂无评论

Blow spinning mass production of melamine@polyacrylonitrile composite nanofibers with enhanced flame-retardant and strengths

引用

Progress in Natural Science:materials International 2023年第5期33卷 634-643页

作者： Jiahao He Wenlu Zhang Xinpeng Jin Chong He Wenbin Li School of Textile Science and Engineering Wuhan Textile University State Key Laboratory of New Textile Materials and Advanced Processing Technologies Wuhan Textile University

To achieve the scalable production of high-performance melamine-based flame retardant nanofibers, solution blowing spinning technology was employed into the continuous spinning of melamine(MA)@polyacrylonitrile(PAN) composite fibers. Propelled by the compressed air current, spinnable MA@PAN solutions can be shaped into nanofiber with a high flow rate over 50 m L/h. Among different melamine-based materials,melamine phosphate(MPP) exhibited excellent solubility in the solution, exceeding 30 wt%, ensuring that the MPP@PAN nanofiber products demonstrated exceptionally robust flame-retardant performance. Furthermore,through fiber textile needle punching technology, loose fiber sponge can be organized into enhanced fiber blankets. These MPP@PAN nanofiber products exhibited outstanding flame retardant and thermal insulation properties, rendering them pivotal as the flame-retardant materials in extreme environments.

关键词： Composites Flame retardance Nanofibers High temperature materials Mechanical properties

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：