检索结果-内蒙古大学图书馆

Precise semi-analytical inverse kinematic solution for 7-DOF offset manipulator with arm angle optimization

Frontiers of Mechanical Engineering 2021年第3期16卷 435-450页

作者： Boyu MA Zongwu XIE Zainan JIANG Hong LIU School of Mechatronics Engineering Harbin Institute of TechnologyHarbin 150001China State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbin 150001China

Seven-degree-of-freedom redundant manipulators with link offset have many advantages,including obvious geometric significance and suitability for configuration *** configuration is similar to that of the experimental module manipulator(EMM)in the Chinese Space Station Remote Manipulator ***,finding the analytical solution of an EMM on the basis of arm angle parameterization is *** study proposes a high-precision,semi-analytical inverse method for ***,the analytical inverse kinematic solution is established based on joint angle ***,the analytical inverse kinematic solution for a non-offset spherical-roll-spherical(SRS)redundant manipulator is derived based on arm angle *** approximate solution of the EMM is calculated in accordance with the relationship between the joint angles of the EMM and the SRS ***,the error is corrected using a numerical method through the analytical inverse solution based on joint angle *** selecting the stride and termination condition,the precise inverse solution is computed for the EMM based on arm angle ***,case solutions confirm that this method has high precision,and the arm angle parameterization method is superior to the joint angle parameterization method in terms of parameter selection.

关键词： 7-DOF redundant manipulator inverse kinematics semi-analytical arm angle link offset

来源：评论

学校读者我要写书评

暂无评论

A Fabric-Based Flexible Actuator for Thumb Joints of Soft Anthropomorphic Hands 23rd

A Fabric-Based Flexible Actuator for Thumb Joints of Soft An...

引用

23rd IFToMM China International Conference on Mechanism and Machine Science and Engineering, IFToMM CCMMS 2022

作者： Zhao, Yi Zhang, Ningbin Feng, Miao Gu, Guoying State Key Laboratory of Mechanical System and Vibration School of Mechanical Engineering Shanghai Jiao Tong University Shanghai200240 China Meta Robotics Institute Shanghai Jiao Tong University Shanghai200240 China

ISBN: (纸本)9789811993978

Although various advanced anthropomorphic hands have been proposed, the design and fabrication of thumb joints to achieve dexterity function in a limited space is still a great challenge. To promote the dexterity of the anthropomorphic thumb joints in the cramped space of the palm, we present a fabric-based flexible actuator used for thumb joints to realize two degrees of freedom (DOFs): circumduction and adduction. First, we introduce the design concept inspired by muscle groups of the human palm. A kind of pneumatic small-scale actuators that relies on fabric-crease to produce deformation is proposed. Then the properties of flexible lightweight actuators are characterized. The actuators just need ± 10 kPa pressure to realize a flexion range of 90°. Finally, we modularly assemble the actuators to construct a compact two DOFs thumb joints. Experimental results show that the applied fabric-based thumb joints can achieve dexterous manipulation like sliding the smartphone screen. © 2023, The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.

关键词： Degrees of freedom (mechanics)

来源：评论

学校读者我要写书评

暂无评论

Design and Control for WLR-3P:A Hydraulic Wheel-Legged Robot

引用

Cyborg and Bionic systems 2023年第1期4卷 243-259页

作者： Xu Li Haoyang Yu Haibo Feng Songyuan Zhang Yili Fu State Key Laboratory of Robotics and System College of Mechatronics EngineeringHarbin Institute of TechnologyHarbin 150001China State Key Laboratory of Fluid Power and Mechatronic Systems Zhejiang UniversityHangzhou 310027China Intelligent Robot Research Center Zhejiang LaboratoryHangzhou 311100China

The robot used for disaster rescue or field exploration requires the ability of fast moving on flat road and adaptability on complex *** hybrid wheel-legged robot(WLR-3P,prototype of the third-generation hydraulic wheel-legged robot)has the characteristics of fast and efficient mobility on flat surfaces and high environmental adaptability on rough *** this paper,3 design requirements are proposed to improve the mobility and environmental adaptability of the *** meet these 3 requirements,2 design principles for each requirement are put ***,for light weight and low inertia with high stiffness,3-dimensional printing technology and lightweight material are ***,the integrated hydraulically driven unit is used for high power density and fast response ***,the microhydraulic power unit achieves power autonomy,adopting the hoseless design to strengthen the reliability of the hydraulic *** is more,the control system including hierarchical distributed electrical system and control strategy is *** mobility and adaptability of WLR-3P are demonstrated with a series of ***,the robot can achieve a speed of 13.6 km/h and a jumping height of 0.2 m.

关键词： robot Robot terrain

来源：评论

学校读者我要写书评

暂无评论

A Lightweight Jumping Robot with Untethered Actuation 16th

A Lightweight Jumping Robot with Untethered Actuation

引用

16th International Conference on Intelligent robotics and Applications, ICIRA 2023

作者： Wang, Jinqiang Wang, Dong State Key Laboratory of Mechanical System and Vibration School of Mechanical Engineering Shanghai Jiao Tong University Shanghai200240 China Meta Robotics Institute Shanghai Jiao Tong University Shanghai200240 China

ISBN: (纸本)9789819964918

Jumping motion is enlarging the robotic toolbox by providing agile and rapid locomotion functions that can overcome the limitations of environment and size. Although these jumping robots powered by novel mechanisms and functional materials have shown remarkable dexterity and adaptability, their intricate actuation mechanics make it challenging to realize the jumping robots lightweight and compact. To address this challenge and endow robots capable of untethered movements, we focused on ultralight magnetic carbon fiber beams that exhibit arch-like bending when triggered under magnetic field and induce a rapid release of stored strain energy after the magnetic field is removed. We evaluated their bending process under magnetic field and build untethered jumping robots with respect different geometries to help analyze their jumping performances. In our experiment, a single magnetic carbon fiber beam robot (0.8 g) with a height of 0.2 mm and a length of 80 mm is able to achieve a jumping height of 420 body heights and a jumping distance of 4.5 body length. By assembling two magnetic beams together, our robot can jump to more than 325 times of its body height carrying a payload of 3 times its body weight. These results demonstrate the developed jumping robot avails a new design strategy for lightweight and compact jumping robot to function in complicated conditions. © The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd 2023.

关键词： Carbon fibers

来源：评论

学校读者我要写书评

暂无评论

Three-line structured light vision system for non-cooperative satellites in proximity operations

引用

Chinese Journal of Aeronautics 2020年第5期33卷 1494-1504页

作者： Yang LIU Zongwu XIE Hong LIU State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbin 150000China

Adapter ring is a commonly used component in non-cooperative satellites,which has high strength and is suitable to be recognized and grasped by the space *** proximity operations,this circle feature may be occluded by the robot arm or limited field of ***,the captured images may be underexposed when there is not enough *** address these problems,this paper presents a structured light vision system with three line lasers and a monocular *** lasers project lines onto the surface of the satellite,and six break points are formed along both sides of the adapter ring.A closed-form solution for real-time pose estimation is given using these break ***,a virtual structured light platform is constructed to simulate synthetic images of the target *** with the predefined camera parameters and relative positions,the proposed method is demonstrated to be more effective,especially at a close ***,a physical space verification system is set up to prove the effectiveness and robustness of our method under different light *** results indicate that it is a practical and effective method for the pose measurement of on-orbit tasks.

关键词： Adapter ring Line detection Non-cooperative target Pose measurement Space robot Structured light

来源：评论

学校读者我要写书评

暂无评论

Torque Ripple Suppression Under Open-Circuit Fault for DTPPMSM Considering Back EMF Harmonics

Torque Ripple Suppression Under Open-Circuit Fault for DTPPM...

引用

International Conference on Applied Superconductivity and Electromagnetic Devices, ASEMD

作者： Chengsi Liu Jibin Zou State Key Laboratory of Robotics and System Harbin Institute of Technology HIT Harbin China

This paper analyzed the impact of phase back electromotive force (back EMF) harmonics on torque of dual three phase permanent magnet synchronous motor (DTPPMSM) from the view of electromagnetic power, and proposed a torque ripple suppression fault-tolerant method for open-circuit fault of DTPPMSM. The proposed method can consider the phase back EMF harmonics, thus achieveing both minimum torque ripple and maximum average torque. The proposed method is verified by both finite element analysis (FEA) and prototype experiment.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Experimental Study on Frog-inspired Swimming Robot Based on Articulated Pneumatic Soft Actuator

引用

Journal of Bionic Engineering 2020年第2期17卷 270-280页

作者： Jizhuang Fan Shuqi Wang Qingguo Yu Yanhe Zhu State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbin 150001China

This paper presents a frog-inspired swimming robot based on articulated pneumatic soft *** realize the miniaturization of the robot and enhance its environmental adaptability,combined with the advantages and characteristics of soft materials,an articulated pneumatic soft actuator is designed based on analysis of a frog's propulsion characteristics.A structural model is established to analyse the mechanical properties of the soft *** the goal of making full use of the driving torque of the actuator and enhancing the propulsion efficiency of the robot,the motion trajectories of each joint of the robot are *** on the trajectory planning,the control strategy of the soft actuator is determined to realize the frog-like swimming of the *** torso size after assembly is 0.175 m×0.100 m×0.060 m,which realizes the miniaturization of the frog-inspired *** the movement of the robot,the torso moves stably and flexibly,and can realize continuous linear and turning *** rationality of the structure and trajectory planning are verified by prototype experiments.

关键词： bionic robotic frog articulated pneumatic soft actuator trajectory planning prototype experiment

来源：评论

学校读者我要写书评

暂无评论

The Application of Acceleration-Level Quaternion Interpolation in the Visual-Servoing Process 13

The Application of Acceleration-Level Quaternion Interpolati...

引用

13th International Conference on Computer and Automation Engineering, ICCAE 2021

作者： Zhao, Xiaoyu Liu, Yang Xie, Zongwu Harbin Institute of Technology State Key Laboratory of Robotics and System Harbin China

ISBN: (纸本)9780738132204

Visual servoing process is widely applied in robot control. In the visual servoing process, an interpolation of the robot end pose is necessary. In the interpolation, quaternion suffers a lot for the discontinuity in trajectory velocity and acceleration. In this paper, we propose an acceleration-level continuous interpolation method and apply it to visual servoing process. In the method, we make up use of the conversion between different rotation descriptors and achieve a smooth enough trajectory. Simulations and experiments are carried out to validate the method and the results show considerable performance. © 2021 IEEE.

关键词： Visual servoing

来源：评论

学校读者我要写书评

暂无评论

Decoding Wrist and Hand Movement Using a Synergy-Driven, Variable Stiffness Musculoskeletal Model Under Different Loads

Decoding Wrist and Hand Movement Using a Synergy-Driven, Var...

引用

IEEE International Conference on robotics and Biomimetics

作者： Jiamin Zhao Yang Yu Xinjun Sheng Xiangyang Zhu State Key Laboratory of Mechanical System and Vibration Shanghai Jiao Tong University Shanghai China State Key Laboratory of Mechanical System and Vibration and the Meta Robotics Institute Shanghai Jiao Tong University Shanghai China

ISBN: (数字)9798331509644

ISBN: (纸本)9798331509651

Myoelectric interfaces, which translate electromyography (EMG) signals into motor intentions, are extensively utilized in prosthetic control due to their intuitive nature. However, current methodologies extremely suffer from performance degradation under non-stationary EMG signals. Varying loads significantly alter muscle activation patterns, with variations in loading weights being a significant factor affecting performance. Conventional EMG-driven musculoskeletal models (MMs) demonstrate robustness across different loads but often neglect the influence of changes in muscle co-contraction levels induced by increased loads. To address this issue, we proposed an improved MM that integrated variable muscle and joint stiffnesses with synergy-based muscle activations into the muscle contraction dynamics. This model adapted to alterations in muscle co-contraction levels under diverse loads, allowing for robust estimation of hand and wrist movements without requiring additional training for different loads. Both offline and online experiments were conducted. The outcomes demonstrated that the proposed model significantly improved robustness and estimation accuracy compared to traditional envelopedriven and constant stiffness MMs. It maintained stable performance across different loads with training conducted solely under zero-load conditions, thereby reducing the training burden. This study presents a novel approach to enhance the reliability of EMG-based human-machine interfaces.

关键词： Training Wrist Adaptation models Accuracy Loading Estimation Muscles Robustness Electromyography Load modeling

来源：评论

学校读者我要写书评

暂无评论

A New Recursive Composite Adaptive Controller for Robot Manipulators

引用

Space(Science & Technology) 2021年第1期2021卷 77-83页

作者： Jianfei Li Yaobing Wang Zhiyong Liu Xin Jing Chengwei Hu The State Key Laboratory of Management and Control for Complex Systems Institute of AutomationChinese Academy of SciencesBeijing 100190China Beijing Key Laboratory of Intelligent Space Robotic System Technology and Applications Beijing Institute of Spacecraft System EngineeringBeijing 100094China State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbin 150001China

In this paper,a new recursive implementation of composite adaptive control for robot manipulators is *** investigate the recursive composite adaptive algorithm and prove the stability directly based on the Newton-Euler equations in matrix form,which,to our knowledge,is the first result on this point in the *** proposed algorithm has an amount of computation O(n),which is less than any existing similar algorithms and can satisfy the computation need of the complicated multidegree *** manipulator of the Chinese Space Station is employed as a simulation example,and the results verify the effectiveness of this proposed recursive algorithm.

关键词： Robot manipulators robot

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：