检索结果-内蒙古大学图书馆

Supplementary Control for Mitigation of Successive Commutation Failures Considering the Influence of PLL Dynamics in LCC-HVDC Systems

引用

CSEE Journal of Power and Energy Systems 2022年第3期8卷 872-879页

作者： Jun Lu Xiaoming Yuan Meiqing Zhang Jiabing Hu State Key Laboratory of Advanced Electromagnetic Engineering and Technology and the School of Electrical and Electronic Engineering Huazhong University of Science and TechnologyWuhan430074China

Line commutated converter based high voltage direct current(LCC-HVDC)links are widely employed for long distance bulk power transmission and asynchronous alternating current(AC)grid ***,LCC-HVDC systems often suffer from commutation failures when AC voltage is distorted,oscillating or reduced by AC faults,which leads to overheating of converter valves and interruptions in transmitted *** of which can have an adverse impact on the safety and stability of the entire power *** paper proposes a supplementary control for mitigation of successive commutation failures on the basis of analyzing the influence of phase-locked loop(PLL)dynamics on the commutation *** analyzing the impact of PLL dynamics on the actual leading angle,it is found that changes in the AC voltage phase remarkably influence ***,the error between the AC voltage phase and PLL’s output angle is added to the output of the extinction angle or DC voltage control to mitigate the successive commutation failures of LCC-HVDC *** conducted on the CIGRE benchmark model in PSCAD/EMTDC validate the performance of the supplementary control,which effectively mitigates successive commutation failures.

关键词： Commutation failure dynamics LCC-HVDC mitigation PLL supplementary control

来源：评论

学校读者我要写书评

暂无评论

Progress of the RF negative hydrogen ion source for fusion at HUST

引用

Plasma Science and technology 2022年第12期24卷 149-156页

作者： Chen ZUO Peng CHEN Zengshan LI Jinghan YANG Fei SONG Dezhi CHEN State Key Laboratory of Advanced Electromagnetic Engineering and Technology Huazhong University of Science and TechnologyWuhan 430074People's Republic of China

Huazhong University of Science and technology has developed an experimental setup of a radio frequency(RF) driven negative hydrogen ion source,to investigate the physics of production and extraction of the H^(-)ions for neutral beam injection in nuclear fusion *** main design parameters of the ion source are:RF power ≤40 kW;extraction voltage ≤10kV;accelerator voltage ≤20 *** paper gives an overview of the progress of the ion source with particular emphasis on some *** RF driver and source plasma are analyzed and optimized in terms of impedance matching,plasma characteristics and power *** regard to the simulation analysis,a plasma model based on the particle-in-cell method and a beam trajectory model considering beam stripping loss are developed to investigate the plasma and negative ions transport inside the ion ***,a collisional radiative model of H and H2is built for plasma optical diagnosis.

关键词： negative ion sources radio frequency(RF) particle-in-cell(PIC) beam simulation

来源：评论

学校读者我要写书评

暂无评论

Numerical study of current density on armature and rail interface with dynamic contact 10

Numerical study of current density on armature and rail inte...

引用

10th Euro-Asian Pulsed Power Conference, 25th International Conference on High-Power Particle Beams and 20th International Symposium on electromagnetic Launch technology, EAPPC-BEAMS-EML 2024

作者： Xu, Jinghan Xia, Shengguo Chen, Lixue Huazhong University of Science and Technology Key Laboratory of Pulsed Power Technology State Key Laboratory of Advanced Electromagnetic Engineering and Technology School of Electrical and Electronic Engineering Wuhan China

ISBN: (纸本)9789038661353

The electrical contact between the armature and rail is acknowledged as an imperfect electrical contact (ImPEC), exhibiting properties distinct from the bulk. It is necessary to understand the current distribution for future structure design and optimization. This paper proposes ImPEC boundary conditions by combining the contact layer model (CLM) and the Cooper-Mikic-Yoranovich model (CMYM), and the current distribution is numerically studied. The contact pressure and area vary with the input current, sharing similar trends, which show a rapid increase in the contact pressure and area during the current ramp-up stage, being constant in the flat stage, and a gradual decline in the current ramp-down stage. The current is re-distributed with the contact area, which is concluded as forced shifts of current caused by dynamic contact. © 2024 Eindhoven University of technology.

关键词： Digital elevation model

来源：评论

学校读者我要写书评

暂无评论

Sterilization mechanism of helium/helium-oxygen atmospheric-pressure pulsed dielectric barrier discharge on membrane surface

引用

Plasma Science and technology 2022年第12期24卷 173-181页

作者： Xingyu CHEN Yuhan Li Mengqi LI Zilan XIONG State Key Laboratory of Advanced Electromagnetic Engineering and Technology Huazhong University of Science and TechnologyWuhan 430074People's Republic of China

Pulsed dielectric barrier discharge(PDBD) exhibits several applications in different fields;however,the interaction of its components with substances remains a key *** this study,we employed experimental and numerical modeling to investigate the interactions between different PDBD components and substances in pure helium and a helium-oxygen mixture.A membrane comprising a Staphylococcus aureus strain was utilized as the treatment object to demonstrate the trace actions of the evolutions and distributions of certain components on the surface of the *** results revealed that the shapes and sizes of the discharging area and inhibition zone differed between *** a pure helium condition,a discharge layer existed along the membrane surface,lying beside the main discharging channel within the electrode ***,an annulus inhibition zone was formed at the outer edge of the electrode in the pure helium group at 30 s and 1 min,and this zone extended to a solid circle at 2 min with a radius that was~50% larger than that of the electrode ***,the discharging channel and inhibition zone in the helium-oxygen mixture were constrained inside the electrode area without forming any annulus.A 2D symmetrical model was developed with COMSOL to simulate the spatiotemporal distributions of different particles over the membrane surface,and the result demonstrated that the main components,which formed the annulus inhibition zone under the pure helium condition,contributed to the high concentration of the He^(+)annulus that was formed at the outer edge of the ***,O^(+)and O_(2)^(+)were the main components that killed the bacteria under the helium-oxygen mixture *** results reveal that the homogenization treatment on a material surface via PDBD is closely related to the treatment time and working gas.

关键词： pulsed dielectric barrier discharge interaction mechanism numerical modeling spatiotemporal distribution of species treatment substance

来源：评论

学校读者我要写书评

暂无评论

Challenges and strategies of formulating low-temperature electrolytes in lithium-ion batteries

引用

Interdisciplinary Materials 2023年第2期2卷 308-336页

作者： Mingsheng Qin Ziqi Zeng Shijie Cheng Jia Xie State Key Laboratory of Advanced Electromagnetic Engineering and Technology School of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuhanChina State Key Laboratory of Materials Processing and Die&Mould Technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhanChina

Lithium-ion batteries(LIBs)have monopolized energy storage markets in modern *** reliable operation of LIBs at cold condition(<0°C),nevertheless,is inevitably hampered by the sluggish kinetics and parasite reactions,which falls behind the increasing demands for portable electronics and electric *** electrolyte controls both Li+transport and interfacial reaction,dictating the low-temperature performance ***,the rational formulation of electrolytes is significant for realizing superior lowtemperature performance and broadening application niches of ***,we first discuss the kinetic limitations of low-temperature LIBs,highlighting the importance of electrolyte structure and interfacial ***,the advancements for formulating subzero-temperature electrolyte are summarized with in-depth discussions about electrolyte formulation,solvation structure,interfacial chemistry,and low-temperature ***,some opportunities for lithium metal batteries and the corresponding lowtemperature electrolyte are ***,the major challenges and future perspectives are outlined for low-temperature LIBs.

关键词： electrolyte lithium-ion batteries low temperatures solvation structures

来源：评论

学校读者我要写书评

暂无评论

Fractional-order Virtual Inertia Control and Parameter Tuning for Energy-storage System in Low-inertia Power Grid

引用

Protection and Control of Modern Power Systems 2024年第5期9卷 70-83页

作者： Yukai Zeng Qiufan Yang Yujun Lin Yin Chen Xia Chen Jinyu Wen State Key Laboratory of Advanced Electromagnetic Engineering Huazhong University of Science and TechnologyWuhan 430074China Department of Electronic and Electrical Engineering University of StrathclydeGlasgow G11XWU.K.

As conventional synchronous generators are replaced by large-scale converter-interfaced renewa-ble-energy sources(RESs),the electric power grid en-counters the challenge of low rotational ***-quently,system frequency deviation is exacerbated and system instability may occur when the frequency deviates beyond the acceptable *** mitigate this effect,this study proposes a virtual inertia control(VIC)strategy based on a fractional-order derivative and controller parameter-tuning *** tuning method uses the stability boundary locus and provides a stability criterion for identifying the stability region in the parameter *** controller parameters are then optimized within the identified stability region to suppress frequency deviation and enhance system *** proposed controller and tuning method is applied to a battery energy-storage system(BESS)in a low-inertia power system with the integration of ***-domain simulations are carried out to verify the stability region and compare the per-formance of the optimized proposed controller to that of the traditional integral-order *** simulation results show that the stability-analysis method is effective and that the fractional-order VIC,tuned with the pro-posed method,outperforms the traditional method in both frequency-regulation performance and parametric robustness.

关键词： Virtual inertia control frequency regulation fractional-order controller stability region parameter tuning

来源：评论

学校读者我要写书评

暂无评论

Oxidation resistant low-alloyed Ti alloys with good ductility

引用

Rare Metals 2024年第8期43卷 3921-3936页

作者： Meng Li Zhang-Zhi Shi Jun-Yi Xu Fu-Zhi Dai Xiang-Min Li Zi-Lin Li Lu-Ning Wang Beijing Advanced Innovation Center for Materials Genome Engineering State Key Laboratory for Advance Metals and MaterialsSchool of Materials Science and EngineeringUniversity of Science and Technology BeijingBeijingBeijing 100083China Institute of Materials Intelligent Technology Liaoning Academy of MaterialsShenyang 110004China

Oxidation resistance enhancement of pure Ti often comes at the cost of reduced ductility,which is frequently the problem through alloying with sole Al,Si,W,Mo and *** overcome the short coming of single element alloying,this paper proposes a multi-element low-alloying strategy to take advantage of synergistic effects and resolve the conflict between oxidation resistance and *** demonstrates that the addition of a small quantity of Ta(0.51wt%)can boost both oxidation resistance and ductility in comparison to pure ***,the combined addition of a small amount(0.54 wt%)of Ta,Nb and Si not only preserves good ductility of pure Ti,but also reduces mass gains to 14%-67%of pure Ti during 100 h oxidation at 650-850℃in *** indicates even better oxidation resistance than that obtained through the use of Ta,Nb,or Nb+Ta *** Ta+Nb+Si alloying creates an oxide layer that is less porous and more resistant to stratification and ***,a 3-μm N-rich layer can form in the Ti substrate beneath the oxide scale,in which phase transformation generates coherent Ti_(2)N with(0001)_(Ti)as the habit plane,with N atoms prefers to diffuse along■than along[0001]_(Ti).The completely transformed Ti_(2)N region or partially transformed Ti+Ti_(2)N region can effectively impede oxygen ***,the multielement low-alloying strategy is promising for enhancing both oxidation resistance and mechanical properties of metallic materials in the future.

关键词： Ti alloys Multi-element Co-alloying Oxidation resistance Mechanical properties

来源：评论

学校读者我要写书评

暂无评论

Research on Coupling Simulation Method of Temperature Field and Stress Field in Double-Layer Thin-Walled Corrugated Tube 18th

Research on Coupling Simulation Method of Temperature Field ...

引用

18th Annual Conference of China Electrotechnical Society, ACCES 2023

作者： Tong, Yingjie Cai, Jiaqi Peng, Sisi Chen, Lingxuan Ding, Xuan Xu, Ying Li, Xianhao State Key Laboratory of Advanced Electromagnetic Engineering and Technology School of Electrical and Electronic Engineering Huazhong University of Science and Technology Wuhan430074 China State Key Laboratory of Electromagnetic Energy Wuhan Institute of Marine Electric Propulsion Wuhan430064 China

ISBN: (纸本)9789819710676

In recent years, with the increasing power load in major cities in China, the existing conventional power cables are unable to meet the high-density and high-capacity power transmission requirements. High-temperature superconducting cables, with their characteristics of high capacity, low loss, compact structure, energy-saving, and environmental-friendliness, have promising applications for future urban high-density power transmission. As one of the key components in the cryogenic refrigeration system of superconducting cables, the mechanical performance of double-layer thin-walled stainless steel corrugated tubes directly determines the ability of superconducting cables to resist external forces. In order to study the mechanical performance of double-layer thin-walled stainless steel corrugated tubes under the operating conditions of superconducting cables, this paper establishes a three-dimensional shell model of double-layer thin-walled stainless steel corrugated tubes under tension and bending conditions using finite element simulation. It analyzes the stress and plastic strain distribution characteristics of the double-layer thin-walled corrugated tubes and proposes a temperature field and stress field coupling simulation method for double-layer thin-walled corrugated tubes. © Beijing Paike Culture Commu. Co., Ltd. 2024.

关键词： Finite element method

来源：评论

学校读者我要写书评

暂无评论

Stability Analysis of Flux Controllable Reactor Access System

Stability Analysis of Flux Controllable Reactor Access Syste...

引用

2024 IEEE International Conference on Electrical Energy Conversion Systems and Control, IEECSC 2024

作者： Wang, Jinfeng Cao, Tiantian Ye, Zhengyang Wan, Xiaorong Li, Dayi Electric Power Scientific Research Institute of Guangdong Power Grid Co. Ltd Guangdong China Huazhong University of Science and Technology State Key Laboratory of Advance Electromagnetic Engineering and Technology Wuhan China

ISBN: (纸本)9798350389357

In order to overcome the limitation that the inductance value of the conventional reactor changes in the power system, a new type of flux controllable reactor access system stability analysis is studied in this paper. Firstly, the topology and working principle of the flux controllable reactor are introduced, and the change of the equivalent impedance of the controllable reactor under the condition of actual injection signal delay is analyzed. The research shows that the delay has great influence on the equivalent impedance of the controllable reactor, and the equivalent impedance of the reactor may show negative resistance characteristics according to the difference of the delay time. Especially when there is a resistive load, the system may have resonance phenomenon, resulting in abnormal increase of the power grid current, and then cause the wrong operation of the relay protection device, which needs to take corresponding suppression measures. Secondly, the influence of delay on the stability of flux-controlled reactor access system is discussed. The correctness and effectiveness of the proposed method are verified by theoretical analysis and simulation model. The research results provide an important reference for the stable application of flux controllable reactor in power system, and help to improve the stability and reliability of power system. © 2024 IEEE.

关键词： Negative resistance

来源：评论

学校读者我要写书评

暂无评论

Spontaneous anchoring Cl intoα-Co(OH)_(2) as efficient and stable oxygen reduction electrocatalysts for seawater battery

引用

Rare Metals 2024年第7期43卷 3074-3083页

作者： Wang Zheng Xue-Rong Zheng Qi Lu Yan-Hui Cao Yang Wang Hai-Peng Fu Jin-Feng Zhang Yi-Da Deng Wen-Bin Hu School of Materials Science and Engineering Key Laboratory of Advanced Ceramics and Machining Technology of Ministry of EducationTianjin UniversityTianjin 300072China State Key Laboratory of Marine Resource Utilization in South China Sea School of Materials Science and EngineeringHainan UniversityHaikou 570228China Key Laboratory of Electromagnetic Processing of Materials Ministry of EducationNortheastern UniversityShenyang 110819China

Seawater battery is an advanced energy storage system that enables conversion of chemical energy to electricity by consuming metals,dissolved oxygen and seawater in anode,cathode and electrolyte,***,the oxygen reduction reaction(ORR)activity and stability of electrocatalysts can be easily deactivated due to the severe Cl~-permeation and corrosion in seawater ***,we developed a structural buffer engineering strategy by spontaneously anchoring Cl~-intoα-Co(OH)_(2) as efficient and stable ORR electrocatalysts,in which the ultrathinα-Co(OH)_(2) nanosheets were synthesized using an ultrafast solution high-temperature shock(SHTS)*** large lattice space(~0.8 nm)of layeredα-Co(OH)_(2) ensured the spontaneously penetration of Cl~-into the lattice structure and replaced part of OH~-to formα-Co(OH)_(2-x)Cl_*** continuous leaching and compensating of saturated Cl inα-Co(OH)_(2-x)Cl_x could enhance the Cl~-corrosion resistance and modulate electronic structure of Co metallic sites,thus improving the ORR electrocatalytic activity and stability in seawater ***α-Co(OH)_(2-x)Cl_x seawater batteries display superior onset and half-wave potentials of 0.71 and 0.66 V,respectively,which are much better than the counterparts ofα-Co(OH)_(2) and ofβ-Co(OH)_(2) with no Cl~-penetrating and no buffer ***α-Co(OH)_(2-x)Cl_x-based seawater batteries display stable open-circuit potential of 1.69 V and outstanding specific capacity of 1345 mAh·g^(-1).

关键词： Seawater battery Oxygen reduction electrocatalyst Solution high-temperature shock Structural buffer engineering

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：