检索结果-内蒙古大学图书馆

Rare Earth Elements(La,Ce,Pr)Modified Co/NC Catalyst for Efficient and Stable Ammonia Decomposition to Hydrogen Production

引用

Journal of Wuhan University of technology(materials Science) 2024年第6期39卷 1372-1378页

作者： ZHU Yi PAN Hongfei State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China National Energy Key Laboratory for New Hydrogen-ammonia Energy Technologies Foshan Xianhu LaboratoryFoshan 528200China

Co/NC catalysts modified with rare earth elements(La,Ce,Pr)were prepared by pyrolysis of rare earth elements doped *** experimental results show that the modification of rare earth elements significantly improves the ammonia decomposition activity and stability of the Co/NC *** La-Co/NC catalyst can achieve an 82.3%ammonia decomposition and 18.4 mmol hydrogen production rate at 550℃with a GHSV of 20000 cm^(3)·h^(-1).Furthermore,no obvious performance degradation is observed after 72 hours of reaction for all rare earth elements modified *** is shown that the modification of rare earth elements significantly improves the surface alkalinity and surface chemical state of the catalyst,and thus improves the ammonia decomposition activity of the catalyst.A new type of high-performance ammonia decomposition Co-based catalyst is proposed,and the promoting effect of rare earth elements on the activity of ammonia decomposition is revealed.

关键词： hydrogen carrier hydrogen production ammonia decomposition rare earth elements cobalt-based catalysts

来源：评论

学校读者我要写书评

暂无评论

3D-printable Boron Nitride/Polyacrylic Hydrogel Composites with High Thermal Conductivities

引用

Journal of Wuhan University of technology(materials Science) 2024年第5期39卷 1303-1310页

作者： DAI Jialei XUE Bingyu QIAN Qi HE Wenhao ZHU Chenglong LEI Liwen WANG Kun XIE Jingjing Hubei Longzhong Laboratory Xiangyang 441000China School of Materials Science and Engineering Wuhan University of TechnologyWuhan 430070China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

Polyacrylic acid(PAA)hydrogel composites with different hexagonal boron nitride(h-BN)fillers were synthesized and successfully 3D-printed while their thermal conductivity was systematically *** the content of h-BN increasing from 0.1 wt%to 0.3 wt%,the thermal conductivity of the 3D-printed composites has been ***,through the shear force given by the 3D printer,a complete thermal conductivity path is obtained inside the hydrogel,which significantly improves the thermal conductivity of the h-BN hydrogel *** maximum thermal conductivity is 0.8808 W/(m·K),leading to a thermal conductive enhancement of 1000%,compared with the thermal conductivity of pure PAA *** study shows that using h-BN fillers can effectively and significantly improve the thermal conductivity of hydrogelbased materials while its 3D-printable ability has been maintained.

关键词： hydrogel composites boron nitride 3D printing thermal conductivity

来源：评论

学校读者我要写书评

暂无评论

Low-temperature-pyrolysis preparation of nanostructured graphite towards rapid potassium storage with high initial Coulombic efficiency

引用

Nano Research 2024年第6期17卷 5138-5147页

作者： Jingke Ren Boyu Xing Wen Luo Binyang Luo Xinfei Wu Xin Yan Wencong Feng Feiyue Wang Chaojie Cheng Liqiang Mai State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Department of Physics School of ScienceWuhan University of TechnologyWuhan 430070China

Industrially prepared artificial graphite(AG)is attractive for potassium-ion batteries(PIBs),but its rate performance is poor and the production process is energy intensive,so developing an efficient strategy to produce novel graphite with low energy consumption and high performance is economically ***,a nanostructured graphite composed of multi-walled carbon nanotubes(MWCNTs)and graphite shells was prepared by one-pot method through low-temperature pyrolysis of iron-based metal-organic framework(MOF)and carbon *** high graphitization degree of nanostructured graphite makes the initial Coulombic efficiency(ICE)exceed 80%,and the three-dimensional(3D)conductive network ensures a specific capacity of 234 mAh·g^(−1)after 1000 cycles at a high current density of 500 mA·g^(−1).In addition,the typical graphite potassium storage mechanism is also demonstrated by in situ X-ray diffraction(XRD)and in situ Raman spectroscopy,and its practicality is also proved by the voltage of the full *** work provides a feasible way to optimize the practical production process of AG and expand its application in energy storage.

关键词： graphite anode potassium-ion batteries high graphitization degree low-temperature pyrolysis initial Coulombic efficiency

来源：评论

学校读者我要写书评

暂无评论

The effect of room temperature magnetic field on photoluminescence of Mn:CsPbBr_(3) quantum dots prepared by one-pot method in air

引用

Nano Research 2025年第4期18卷 561-568页

作者： Mengwei Chen Chenguang Shen Wei Huang Yingping Yang Jie Shen Department of Physics School of Physics and MechanicsWuhan University of TechnologyWuhan 430070China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing School of Materials Science and EngineeringWuhan University of TechnologyWuhan 430070China

The generation and manipulation of spin-polarized electrons at room temperature are essential for the development of advanced spin-optoelectronic *** this work,a one-pot method was used to successfully synthesize homogenous Mn:CsPbBr_(3) perovskite quantum dots in air with particle sizes of 7−8 *** effects of Mn doping on the structure,optical and magnetic properties of CsPbBr_(3) quantum dots were *** findings demonstrated proper Mn doping improved the crystallinity and photoluminescence(PL)of quantum *** prepared quantum dots have a narrow full width at half maximum emission(FWHM)of about 17−20 *** magnetic properties of the doped samples and the effect of the magnetic field on the PL spectra properties were *** results show that trace Mn doping can improve the room-temperature ferromagnetism of CsPbBr_(3) quantum *** with magnetic elements makes CsPbBr_(3) quantum dots more responsive to the applied magnetic *** at a lower 50 mT magnetic field,the PL peak of Mn:CsPbBr_(3) still declined 5.91%.Mn:CsPbBr_(3) quantum dots are a new type of multifunctional material that is beneficial to spintronics *** work demonstrates a low-cost synthesis *** should make all-inorganic perovskite quantum dots a promising material for room-temperature spin optoelectronic devices.

关键词： CsPbBr_(3)quantum dots Mn doping one-pot method ferromagnetism magnetic field

来源：评论

学校读者我要写书评

暂无评论

Ultrafast Laser Irradiation Induced Oxidation of Dopant-Free Spiro-OMeTAD for Improving the Perovskite Solar Cells Performance

引用

Energy & Environmental materials 2025年第2期8卷 288-294页

作者： Jiaqi Meng Xiangyu Chen Weihan Li Nianyao Chai Zhongle Zeng Yunfan Yue Fengyi Zhao Xuewen Wang Center of Femtosecond Laser Manufacturing for Advanced Materials and Devices State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology School of Materials Science and Engineering Wuhan University of Technology International School of Materials Science and Engineering Wuhan University of Technology National Energy Key Laboratory for New Hydrogen-Ammonia Energy Technologies Foshan Xianhu Laboratory

The exceptional photoelectric performance and high compatibility of perovskite materials render perovskite solar cells highly promising for extensive development,thus garnering significant *** perovskite solar cells,the hole transport layer plays a crucial *** the commonly employed organic small molecule hole transport material Spiro-OMeTAD,a certain period of oxidation treatment is required to achieve complete transport ***,this posttreatment oxidation processes typically rely on ambient oxidation,which poses challenges in terms of precise control and leads to degradation of the perovskite light absorption *** approach fails to meet the demands for high efficiency and stability in practical ***,the mechanism of ultrafast laser on Spiro-OMeTAD and the reaction process for laser-induced oxidation of it are ***2at Perovskite/Spiro-OMeTAD interface breaks down to produce I2upon ultrafast laser irradiation and I2promote the oxidation *** the laser irradiation oxidation processing,a higher stability of perovskite solar cells is *** work establishes a new approach toward oxidation treatment of Spiro-OMeTAD.

关键词： hole transport layer perovskite solar cells ultrafast laser irradiation undoped Spiro-OMeTAD

来源：评论

学校读者我要写书评

暂无评论

Thermodynamics aided design of hBN-capsulated diboride powders from novel nitrate precursors for high entropy ceramics

引用

Journal of materials Science & technology 2024年第11期178卷 133-142页

作者： Hailing Yang Ji Zou Zhimin Xiong Jingjing Liu Weimin Wang Zhengyi Fu State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China School of Materials Science and Engineering Wuhan University of TechnologyWuhan 430070China Hubei Longzhong Laboratory Xiangyang 441000China

Hexagonal BN-coated powders have been widely used in various engineering sectors,however,their pro-ductions are restricted by the complexity of gas-solid *** this study,guided by thermodynamics,a novel approach to synthesize Layer-structured hexagonal BN(hBN)-coated high entropy diboride pow-ders in vacuum was developed,using metal salt Zr(NO_(3))4·5H_(2)O,HfCl_(4),NbC_(15),TaC_(15),C_(16)H_(36)O_(4)Ti,boric acid,and sucrose as raw *** adjusting the ratio of carbon to metal source(C/M),powders only consisting of two boride solid solutions and hBN were finally obtained,under an optimal process-ing condition of C/M=5.5 and synthesis temperature of 1400 ℃.Parts of hBN were found to coat on high-entropy metal diborides ceramic(HEB)particles,corresponding formation mechanism for core-shell structured powders was investigated,together with the liquid precursor assisted boro/carbothermal re-duction *** from as-synthesized core-shell powders,(Ti_(0.2)Zr_(0.2)Hf_(0.2)Nb_(0.2)Ta_(0.2))B2-11 vol%hBN ceramics were densified at 1900 ℃ under 50 MPa without holding,with a high relative density of 97.3%.

关键词： High entropy boride Boro/carbothermal reduction Sol-gel Core-shell powders Densification

来源：评论

学校读者我要写书评

暂无评论

Effect of Particle Size on Silicon Nitride Ceramic Slurry by Stereolithography

引用

Journal of Wuhan University of technology(materials Science) 2023年第3期38卷 514-519页

作者：汪春柳 ZHANG Jinyong 雷丽文 School of Materials Science and Engineering Wuhan University of TechnologyWuhan 430070China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan 430070China

The effects of particle size,gradation and solid loading of silicon nitride (Si_(3)N_(4)) on the rheological behavior and curing properties of ceramic slurry are studied by stereolithography (SLA).The results show that the particle size of Si_(3)N_(4) powder has a signif icant influence on the rheological properties and stability of the *** m_(D50=1.3μm):m_(D50=2.3μm)=3:7,the slurry viscosity is low and the sedimentation is *** most important thing is that with the increase of the solid loading of the slurry,the viscosity of the slurry increases,the stability becomes higher,and the curing thickness *** curing thickness of Si_(3)N_(4) ceramic slurry with solid loading of 50 vol% can reach nearly 50μ*** above results finally show that the process optimizes the formulation of the slurry in rheological and curing properties.

关键词： silicon nitride stereolithography dispersion stability

来源：评论

学校读者我要写书评

暂无评论

Homologous CoS2 interface with directed electron transfer and strong chloridion repulsion for efficient seawater oxidation

引用

Science China Chemistry 2025年第5期68卷 1869-1878页

作者： Yuan Tian Jiang-Bo Chen Jie Ying Ge Tian Yu-Xuan Xiao Yi Lu Si-Ming Wu Wei Geng Ling Shen Xiao-Yu Yang State Key Laboratory of Advanced Technology for Materials Synthesis and Processing and School of Materials Science and Engineeringand Shenzhen Research Institute & Laoshan LaboratoryWuhan University of Technology School of Chemical Engineering and Technology Sun Yat-sen University National Energy Key Laboratory for New Hydrogen-Ammonia Energy Technologies Foshan Xianhu Laboratory

Seawater electrolysis is a highly promising method to produce high energy density hydrogen,especially in dry areas that have scarce freshwater ***,application of seawater electrolysis is confronted by two major problems associated with catalysts employed for the anodic oxygen evolution reaction（OER） including the competitive hypochlorite evolution reaction（HCER） and strong chloridion（Cl-） triggered *** studies aimed at overcoming these problems,a facile method has been developed to synthesize a homologous CoS2heterojunction as an OER *** to a difference in work functions at the interface and increased electron density,this material has directed electron transfer and strong chloridion repulsion properties,*** have shown that CoS2achieves low overpotentials of 289 and 322 mV at 10 mA cm-2current density in respective alkaline（1 M KOH） and alkaline simulated seawater ***,the outstanding stability of CoS2is reflected in a negligible decline in activity during promotion of the OER for 100 *** of density functional theory calculations reveal that the homologous CoS2heterojunction promotes directed electron transport for optimizing adsorption/desorption of reactive species and heightens the Cl-adsorption energy for strongly repulsing Cl-,phenomena that enhance OER performance in alkaline simulated seawater.

关键词： metal sulfide homologous heterojunction directed transfer chloride ion repulsion seawater electrolysis

来源：评论

学校读者我要写书评

暂无评论

Photoexcitation-induced passivation of SnO2 thin film for efficient perovskite solar cells

引用

National Science Review 2023年第11期10卷 183-191页

作者： Nianyao Chai Xiangyu Chen Zhongle Zeng Ruohan Yu Yunfan Yue Bo Mai Jinsong Wu Liqiang Mai Yi-Bing Cheng Xuewen Wang State Key Laboratory of Advanced Technology for Materials Synthesis and Processing International School of Materials Science and EngineeringWuhan University of Technology National Energy Key Laboratory for New Hydrogen-Ammonia Energy Technologies Foshan Xianhu Laboratory

A high-quality tin oxide electron transport layer(ETL) is a key common factor to achieve high-performance perovskite solar cells(PSCs). However, the conventional annealing technique to prepare high-quality ETLs by continuous heating under near-equilibrium conditions requires high temperatures and a long fabrication time. Alternatively, we present a non-equilibrium, photoexcitation-induced passivation technique that uses multiple ultrashort laser pulses. The ultrafast photoexcitation and following electron–electron and electron–phonon scattering processes induce ultrafast annealing to efficiently passivate surface and bulk defects, and improve the crystallinity of Sn O2, resulting in suppressing the carrier recombination and facilitating the charge transport between the ETL and perovskite interface. By rapidly scanning the laser beam, the annealing time is reduced to several minutes, which is much more efficient compared with conventional thermal annealing. To demonstrate the university and scalability of this technique, typical antisolvent and antisolvent-free processed hybrid organic–inorganic metal halide PSCs have been fabricated and achieved the power conversion efficiency(PCE) of 24.14% and 22.75% respectively, and a12-square-centimeter module antisolvent-free processed perovskite solar module achieves a PCE of 20.26%,with significantly enhanced performance both in PCE and stability. This study establishes a new approach towards the commercialization of efficient low-temperature manufacturing of PSCs.

关键词： photoexcitation-induced passivation ultrafast laser carrier management electron transport layer perovskite solar cells

来源：评论

学校读者我要写书评

暂无评论

Piezoelectric composite hydrogel with wireless electrical stimulation enhances motor functional recovery of spinal cord injury

引用

Journal of materials Science & technology 2024年第5期172卷 228-239页

作者： Zehao Li Guanlin Li Xinyu Wang Zheng Zhao State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Sanya Science and Education Innovation Park of Wuhan University of Technology Sanya 572000China

Electrical stimulation(ES)can restore motor function after spinal cord injury(SCI).However,traditional intraspinal ES has many disadvantages,such as the need for a complex circuitry device,an external power source,and a second surgery to remove the *** materials have received increasing at-tention due to their potential to convert ambient mechanical energy into ES without an external power source or implantation of ***,a novel polydopamine(PDA)coated barium titanate(BaTiO_(3))nanoparticles(BaTiO_(3)@PDA)incorporated silk fibroin(SF)hydrogel(SFBT)was *** SFBT hy-drogel was crosslinked by horseradish peroxidase(HRP)/hydrogel peroxide(H_(2)O_(2))to integrate the piezo-electric potency of BaTiO_(3)with the thermal sensitivity of HRP/H_(2)O_(2)for SCI *** hydrogel con-taining 5%(w/v)BaTiO_(3)@PDA nanoparticles(SFBT-5),which was selected for in vivo study,exhibited a short gelation time(5 min),suitable storage modulus(925±35 Pa),and wireless ES(average current of 124 nA).Moreover,Basso-Beattie-Bresnahan(BBB)scores test and footprint analysis demonstrated that the SFBT-5 hydrogel successfully enhanced motor functional recovery of *** histopathological assess-ments,the SFBT-5 hydrogel significantly accelerated spinal cord healing,as indicated by smaller lesion cavities(∼16.7%of the SCI group).Meanwhile,the SFBT-5 hydrogel accelerated neurogenesis,facilitated axon regrowth and synapse formation,and promoted ***,this study highlights the potential of piezoelectric hydrogels for SCI regeneration.

关键词： Silk fibroin Barium titanate Piezoelectric hydrogel Spinal cord injury Electrical stimulation

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：