检索结果-内蒙古大学图书馆

19th Annual Conference of China Electrotechnical Society, ACCES 2024

作者： Gu, Anbang Xia, Shengguo Key Laboratory of Pulsed Power Technology Ministry of Education Huazhong University of Science and Technology Wuhan China State Key Laboratory of Advanced Electromagnetic Engineering and Technology Huazhong University of Science and Technology Wuhan China

ISBN: (纸本)9789819608966

Three optimization objectives are proposed to suppress transition during the armature launching process: the deviation rate of the current density distribution on the armature rail’s contact surface under steady-state current, the deviation rate of the current density distribution on the throat’s surface under steady-state current, and the deviation degree of the overfill contact pressure’s center of action. The NSGA-2 multi-objective optimization algorithm is used to optimize the armature structure. Firstly, the random response surface of the optimization objectives is established in a large range of armature geometrical parameters, and then the range of values of armature geometrical parameters is obtained according to the limitations of the armature structure in the actual problem, and then the optimization of the armature structure is carried out and the optimal compromise solution is screened out in this range. The simulation results show that the optimized armature, compared with the benchmark armature, has a more centered distribution of the overfill contact pressure on the contact surface, smaller current peaks on the contact surface of the armature rails during the launching process, and lower maximum temperature at the throat, which indicates that the optimized armature is more capable of suppressing the armature start-up phase transition, the magnetic saw of the throat transition, and the current falling-edge phase transition. © Beijing Paike Culture Commu. Co., Ltd. 2025.

关键词： Multiobjective optimization

来源：评论

学校读者我要写书评

暂无评论

Finite element analysis of pile expansion by shock wave of metal wire explosion in liquids 6

Finite element analysis of pile expansion by shock wave of m...

引用

6th IEEE International Electrical and Energy Conference, CIEEC 2023

作者： Liu, Yi Huang, Shijie Zhao, Yong Xu, Youlai Wang, Tianyu Lin, Fuchang Li, Hua Huazhong University of Science and Technology State Key Laboratory of Advanced Electromagnetic Engineering and Technology Key Laboratory of Pulsed Power Technology Wuhan China

ISBN: (纸本)9798350346671

Construction of specially shaped pile foundations by compacting the soil around the borehole with shock waves, which can effectively increase the load-bearing capacity of the pile material. The metal wire explosion in liquid has the advantages of high energy efficiency, good repeatability and controllability. The strong shock wave generated by the explosion can compress the soil to enlarge the size of pile foundations and construct shaped pile foundations, which has industrial prospects. In order to analyze the mechanism of pile expansion by metal wire explosion in liquid, a test platform was established, and parameters such as discharge voltage, current and energy were obtained. Based on the dynamic analysis software Ls-dyna, a two-dimensional simulation model of the shock wave generated by explosion in liquid acting on the soil was established, and the material parameters and model dimensions were reasonably determined. The propagation and attenuation processes of shock waves in cement slurry and soil were numerically simulated. The cumulative effect of pile foundation expansion under the action of multiple shock waves was analyzed, and compared with the test results. © 2023 IEEE.

关键词： Piles

来源：评论

学校读者我要写书评

暂无评论

Revealing the size effect of Fe S2on solid-state battery performances at different operating temperatures

引用

Chinese Chemical Letters 2024年第6期35卷 189-194页

作者： Chaochao Wei Ru Wang Zhongkai Wu Qiyue Luo Ziling Jiang Liang Ming Jie Yang Liping Wang Chuang Yu School of Chemistry and Chemical Engineering Huazhong University of Science and TechnologyWuhan 430074China State Key Laboratory of Advanced Electromagnetic Engineering and Technology School of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuhan 430074China School of Materials and Energy University of Electronic Science and Technology of ChinaChengdu 611731China

FeS_(2) shows significant potential as cathode material for all-solid-state lithium batteries(ASSLBs)due to its high theoretical specific capacity,low cost,and environmental ***,the poor ion/electron conductivity and large volume variation effect of FeS_(2) inhibit its practical ***,the influence of particle size of FeS_(2) on the corresponding sulfide-based solid-state batteries is carefully investigated by tuning FeS_(2) ***,low operating temperature is chosen to mitigate the large volume changes during cycling in the battery.S-FeS_(2) with smaller particle sizes delivers superior electrochemical performances than that of the larger L-FeS_(2) in Li_(5.5)PS_(4.5)Cl_(1.5)-based ASSLBs under different operating temperatures.S-FeS_(2) shows stable discharge capacities during 50 cycles with a current density of 0.1 m A/cm^(2)under -20℃.When the current density rises to 1.0 m A/cm^(2),it delivers an initial discharge capacity of 146.9 m Ah/g and maintains 63% of the capacity after 100 *** work contributes to constructing ASSLBs enables excellent electrochemical performances under extreme operating temperatures.

关键词： FeS_(2) Size effect Li_(5.5)PS_(4.5)Cl_(1.5) electrolytes Operating temperatures Electrochemical performances

来源：评论

学校读者我要写书评

暂无评论

Research on inductance gradient of electromagnetic railgun based on eddy current field analysis 10

Research on inductance gradient of electromagnetic railgun b...

引用

10th Euro-Asian Pulsed Power Conference, 25th International Conference on High-Power Particle Beams and 20th International Symposium on electromagnetic Launch technology, EAPPC-BEAMS-EML 2024

作者： Xu, Shengqin Chen, Lixue Xu, Shengqin Zhang, Wenhao Zhao, Bingxuan Xiao, Tingyun Huazhong University of Science and Technology State Key Laboratory of Advanced Electromagnetic Technology Key Laboratory of Pulsed Power Technology Ministry of Education School of Electrical and Electronic Engineering Wuhan China

ISBN: (纸本)9789038661353

Inductance gradient has a significant effect on muzzle kinetic energy and launch efficiency in electromagnetic railgun. Inductance gradient is determined by the current distribution in the armature and rail, transient skin effect, velocity skin effect, and proximity effect are the main physical mechanisms affecting the current distribution of electromagnetic railgun. Additionally, the structure and size of the rail also have an impact on current distribution. In order to analyze inductance gradient, the control equation of the electromagnetic railgun is analyzed, and the 3D motion model of the electromagnetic railgun is established. The distribution of the 3D current and magnetic field under the influence of the velocity skin effect is calculated, and then the time-varying curves of the inductance gradient during the whole launch process are drawn, curves show that the inductance gradient trend when velocity skin effect is considered is opposite to that not considered. At the same time, the inductance gradient under different rail structures is compared by simulation calculation, the results show that the inductance gradient of the rectangular rail is larger than that of the T-shaped rail and the arc-shaped rail. Finally, the effect of the dimensions of the rectangular rail on the inductance gradient is investigated, and the results show that the inductance gradient of the rectangular rail decreases gradually with the increase of the rail width, and increases and then decreases with the increase of the rail height. © 2024 Eindhoven University of technology.

关键词： Kinetic energy

来源：评论

学校读者我要写书评

暂无评论

Characterization of a Raman-based distributed fiber optical temperature sensor in liquid nitrogen

引用

Superconductivity 2022年第4期4卷 22-28页

作者： Yi Yue Guilun Chen Jiajie Long Li Ren Kao Zhou Xianhao Li Ying Xu Yuejin Tang State Key Laboratory of Advanced Electromagnetic Engineering and Technology School of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuhanChina

Distributed Temperature Sensor(DTS)based on Raman scattering have a promising application in temperature monitoring and quench detection of high‐temperature superconducting(HTS)fiber optic *** this paper,a series of mechanical property tests were carried out on fiber optical cables with different encapsulation materials to select the best material for the engineering *** was followed by loss testing of fiber optic cables with different outer diameters under liquid nitrogen(LN_(2))and the optimal outer diameter to meet measurement accuracy and engineering practicability was ***,the temperature measurement of fiber optic cables laid on HTS fiber optic cables were calibrated using thermocouple as a *** results of this research results provide a suitable fiber optic cable for engineering *** the same time,it provides a reference for the selection of optical cable structure parameters in HTS optical cable projects.

关键词： DTS HTS cable Mechanical property Optical loss

来源：评论

学校读者我要写书评

暂无评论

Research on the Mechanism of Electrical Erosion Accelerating Failure in High-Current Pulse Thyristor-Based Switches

引用

IEEE Transactions on Device and Materials Reliability 2025年第2期25卷 263-273页

作者： Xiao, Shiyun Liu, Yi Li, Liuxia Lin, Fuchang Miao, Yunxin Huazhong University of Science and Technology School of Electrical and Electronic Engineering Wuhan430074 China Huazhong University of Science and Technology State Key Laboratory of Advanced Electromagnetic Technology Wuhan430074 China

High-current pulse thyristor-based switches operate under high-current pulse conditions and are subjected to coupled electromagnetic-thermomechanical stresses, resulting in the progressive development of thermal fatigue-induced failure mechanisms. The study revealed that localized overheating triggers electrical erosion of the aluminum layer, which further accelerates the thermal fatigue failure of high-current switches. To investigate this phenomenon, a microscopic model of the silicon-aluminum interface incorporating surface roughness effects was developed to quantify the transient temperature rise and electrical erosion threshold under varying pulsed current conditions, with experimental validation demonstrating strong agreement. Furthermore, using a thermal network model, we established a correlation between the electrical erosion threshold and the average junction temperature for different high-current pulses and clamping stresses, thereby defining the operational range for electrical erosion in high-current pulse thyristor-based switches. This provides theoretical guidance for the reliable operation of these switches. © 2001-2011 IEEE.

关键词： Thermal fatigue

来源：评论

学校读者我要写书评

暂无评论

Improvement of Formation,Microstructure and Mechanical Properties of TIG Welded TC4 Titanium Alloy by Ultrasonic Coaxial Radiation

引用

Acta Metallurgica Sinica(English Letters) 2024年第12期37卷 2045-2056页

作者： Yihao Gao Boqiao Ren Yunhao Chen Xinchen Sui Xiaohui Zhao Chenglei Fan Chao Chen Key Laboratory of Automobile Materials School of Materials Science and EngineeringJilin UniversityChangchun130025China State Key Laboratory of Advanced Welding and Joining Harbin Institute of TechnologyHarbin150001China

In this study,the effects of ultrasonic coaxial assisted TIG welding(U-TIG)on the formation,microstructure,and mechanical properties of TC4 titanium alloy welded joints were *** results indicated that at optimal ultrasonic power and welding current settings,remarkable improvements of welded joint were ***,the weld depth-to-width ratio increased by 267%compared to conventional TIG welding,reaching ***,the microhardness of the welded seam increased by 53%,reaching 550.1 HV,while the tensile strength of the welded joint rose to 1197.7 MPa,representing a 12.2%*** compressing effect of ultrasound concentrates the energy of the arc,thereby improving the penetration depth of the welded *** addition,ultrasonic cavitation plays a crucial role in refining the grain structure of the weld seam,consequently enhancing its strength.

关键词： TC4 alloy Ultrasonic coaxial assisted TIG welding(U-TIG) Arc shape Microstructure Mechanical properties

来源：评论

学校读者我要写书评

暂无评论

Design and performance study of a dielectric-filled cavity beam current monitor for HUST-PTF

引用

Nuclear Science and Techniques 2023年第8期34卷 75-85页

作者： Ji-Qing Li Kuan-Jun Fan Zheng-Zheng Liu Jian Wang Qu-Shan Chen Jin-Feng Yang State Key Laboratory of Advanced Electromagnetic Engineering and Technology School of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuhan 430074China The Institute of Scientific and Industrial Research Osaka University8-1 MihogaokaIbarakiOsaka 567-0047Japan

To guarantee the exact proton dose applied to patients and ensure treatment safety while disrupting and destroying tumor cells,it is essential to accurately monitor the proton beam current in real time during patient *** clinical treatment requires a proton beam current in the∼nA range,nondestructive beam current monitors(BCMs)are preferred to minimize the degradation of beam ***,this poses significant challenges in accurately monitoring such extremely low beam *** study proposes a cavity-type BCM equipped with a dielectric plate to reduce its dimensions and achieve sufficient measurement sensitivity for practical requirements.A prototype cavity BCM was fabricated,and off-line testing was performed using a metal wire to simulate the beam to study its *** the simulation and experi-mental results showed that the cavity BCM could measure ultralow proton beam currents with a resolution up to 0.03 nA.

关键词： Proton therapy Beam current Cavity BCM Nondestructive

来源：评论

学校读者我要写书评

暂无评论

Grid Forming Converters in Renewable Energy Sources Dominated Power Grid:Control Strategy,Stability,Application,and Challenges

引用

Journal of Modern Power Systems and Clean Energy 2021年第6期9卷 1239-1256页

作者： Haobo Zhang Wang Xiang Weixing Lin Jinyu Wen State Key Laboratory of Advanced Electromagnetic Engineering and Technology Huazhong University of Science and Technology TBEA Sunoasis Company Ltd. the State Key Laboratory of Advanced Electromagnetic Engineering and Technology Huazhong University of Science and Technology

The renewable energy sources(RESs)dominated power grid is an envisaged infrastructure of the future power system,where the commonly used grid following(GFL)control for grid-tied converters suffers from lacking grid support capability,low stability,***,emerging grid forming(GFM)control methods have been proposed to improve the dynamic performance and stability of grid-tied *** paper reviews existing GFM control methods for the grid-tied converters and compares them in terms of control structure,grid support capability,fault current limiting,and *** the impact of fault current limiting strategies,a comprehensive transient stability analysis is *** addition,this paper explores the typical applications of GFM converters,such as AC microgrid and offshore wind farm high-voltage direct current(OWF-HVDC)integration ***,the challenges to the GFM converters in future applications are discussed.

关键词： Grid following(GFL)control grid forming(GFM)control high-voltage direct current(HVDC) microgrid renewable energy small-signal stability transient stability

来源：评论

学校读者我要写书评

暂无评论

Modular Modeling Method for Transfer Function of VSC Grid-Connected System 3

Modular Modeling Method for Transfer Function of VSC Grid-Co...

引用

3rd International Conference on Intelligent Power and Systems, ICIPS 2023

作者： Li, Yutong Sun, Haishun The State Key Laboratory of Advanced Electromagnetic Engineering and Technology Huazhong University of Science and Technology Hubei Wuhan China

ISBN: (纸本)9798350328691

This paper provides a detailed introduction to a modular modeling approach for the transfer function of the VSC grid-connected system. The obtained results can accurately reflect the small-disturbance stability level of VSC grid-connected systems. These results are based on the VSC outer-loop reference signal and the corresponding feedback signal, constituting a two-input two-output system. The modeling process involves three steps. Initially, only the dynamic processes of the VSC inner-loop control and PLL control modules are considered. Subsequently, the relevant modules of the VSC outer-loop control are included. Finally, it is condensed into a concise form. By utilizing the basic property of linearity in systems that adhere to the superposition principle, it can be converted into an equivalent single-input single-output system. This enables the application of the Nyquist stability criterion for stability analysis. All results presented in this paper have been validated through PSCAD/EMTDC simulation. ©2023 IEEE.

关键词： Transfer functions

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：