检索结果-内蒙古大学图书馆

Enhanced Photocatalytic Activity of Z-scheme Meso-BiVO_(4)-Au-CdS for Degradation of Rhodamine B

Journal of Wuhan University of Technology(materials Science) 2024年第4期39卷 869-876页

作者：张雁伟 WANG Yanze LI Junguo XIE Jingjing 王文宣 FU Zhengyi State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Hubei Longzhong Laboratory Xiangyang 441000China

We synthesized BiVO_(4)mesocrystals with ordered assembly structure,and studied the structural order and the relationship between the photodegradation of Rhodamine *** nanoparticles(NPs)were successfully loaded onto Meso-BiVO_(4)by light-assisted induction,and Cd nanoparticles were further selected to be deposited on Au nanoparticles to form Z-scheme photocatalyst Meso-BiVO_(4)-Au-CdS *** try and propose to analyze its ordered assembly structure by XRD for the first *** results show that Meso-BiVO_(4)is a mesocrystal with highly exposed(001)plane and directional assembly *** charge separation efficiency of all samples was studied by PL *** results show that the Z-scheme Meso-BiVO_(4)-Au-CdS can promote the charge separation and obtain the best carrier separation ***,it has the best photocatalytic activity in the experiment of photocatalytic degradation of rhodamine *** main active species in the degradation process were confirmed by free radical trapping experiment,and the degradation mechanism was put forward.

关键词： biomineralization photosynthesis mesocrystal photocatalysis TiO_(2) BiVO_(4)

来源：评论

学校读者我要写书评

暂无评论

Strengthening and toughening mechanisms of martensite-bainite microstructure in 2 GPa ultra-high strength steel during hot stamping

引用

Science China(Technological Sciences) 2025年第5期68卷 15-29页

作者： Yanli SONG Ye LI Jue LU Lin HUA Yanfeng GU Yikuan YANG Hubei Key Laboratory of Advanced Technology for Automotive Components Wuhan University of TechnologyWuhan 430070China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

In response to the growing demand for energy efficiency,safety,and lightweight designs in new energy vehicles,this study addresses the challenge of balancing strength and toughness in ultra-high strength steel(UHSS)components produced by hot *** innovative hot stamping process based on a martensite-bainite(M-B)complex-phase microstructure was proposed to enhance the strength and toughness of *** microstructural evolution of the M-B complexphase during the hot stamping process was investigated using commercial B1800HS *** a microstructure consisting of 87.4.%martensite,8.7%lower bainite,and 3.9%film-like retained austenite by volume fraction,the steel achieved a tensile strength of 1944 MPa,total elongation of 9.66%,and impact energy of 25.8 *** with conventional hot stamping,the strength of the material showed only a slight improvement,whereas elongation and impact energy were enhanced by approximately 53%and 32%,respectively.A quantitative relationship among process parameters,resulting microstructure,and mechanical properties was *** between strength and toughness was observed when the low bainite volume fraction ranged from 5.06%to 8.73%.The toughening mechanisms are attributed to the refinement of martensite lath bundles(width of 202 nm)facilitated by bainite formation,the increase in high-angle grain boundaries,and the presence of nanoscale retained austenite(width of 80 nm)between the ***,the refinement of grains and the formation of nanoscale(Nb,Ti)C precipitates(diameter of 17 nm)further contributed to the overall *** developed M-B complexphase process,which involves medium-temperature slow cooling followed by rapid low-temperature quenching,provides an optimal combination of strength and toughness for a wide range of applications.

关键词： ultra-high strength steel hot stamping strengthening and toughening mechanisms martensite-bainite complexphase microstructure

来源：评论

学校读者我要写书评

暂无评论

Rare Earth Elements(La,Ce,Pr)Modified Co/NC Catalyst for Efficient and Stable Ammonia Decomposition to Hydrogen Production

引用

Journal of Wuhan University of Technology(materials Science) 2024年第6期39卷 1372-1378页

作者： ZHU Yi PAN Hongfei State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China National Energy Key Laboratory for New Hydrogen-ammonia Energy Technologies Foshan Xianhu LaboratoryFoshan 528200China

Co/NC catalysts modified with rare earth elements(La,Ce,Pr)were prepared by pyrolysis of rare earth elements doped *** experimental results show that the modification of rare earth elements significantly improves the ammonia decomposition activity and stability of the Co/NC *** La-Co/NC catalyst can achieve an 82.3%ammonia decomposition and 18.4 mmol hydrogen production rate at 550℃with a GHSV of 20000 cm^(3)·h^(-1).Furthermore,no obvious performance degradation is observed after 72 hours of reaction for all rare earth elements modified *** is shown that the modification of rare earth elements significantly improves the surface alkalinity and surface chemical state of the catalyst,and thus improves the ammonia decomposition activity of the catalyst.A new type of high-performance ammonia decomposition Co-based catalyst is proposed,and the promoting effect of rare earth elements on the activity of ammonia decomposition is revealed.

关键词： hydrogen carrier hydrogen production ammonia decomposition rare earth elements cobalt-based catalysts

来源：评论

学校读者我要写书评

暂无评论

Photocatalytic hydrogen production toward carbon neutrality:tracking charge separation

引用

National Science Review 2023年第9期10卷 9-10页

作者： Bao-Lian Su Laboratory of Inorganic Materials Chemistry University of Namur State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology

Under the vision of 'carbon peaking and carbon neutrality',the global energy system is facing a deep *** a clean energy with the potential to achieve zero carbon emissions,hydrogen energy will undoubtedly play an important ***-energy-driven photo catalytic reactions can decompose water to produce hydrogen and reduce carbon dioxide to produce solar fuels.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Origin of shear induced‘catching bonds’on half Heusler thermoelectric compounds XFeSb(X=Nb,Ta)and SnNiY(Y=Ti,Zr,Hf)

引用

npj Computational materials 2024年第1期10卷 2607-2614页

作者： Haoqin Ma Xiege Huang Zhongtao Lu Xiaobin Feng Bo Duan Wenjuan Li Yinhan Liu Pengcheng Zhai Guodong Li Qingjie Zhang Hubei Key Laboratory of Theory and Application of Advanced Materials Mechanics School of ScienceWuhan University of Technology430070 WuhanChina State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology430070 WuhanChina

Half Heusler materials exhibit excellent thermoelectric and mechanical properties,rendering them potential candidates for advanced thermoelectric ***,the developments on interrelated devices are impeded by their inherent brittleness and limited ***,it exists the potential ductility on half Heusler materials with face-centered cubic sub-lattices through the expectation of the occurrence of shear-induced‘catching bonds’which can result in excellent ductility on other face-centered cubic materials.

关键词： ductility cubic rendering

来源：评论

学校读者我要写书评

暂无评论

Effect of Composite Composition on the Contact Angle of B_(4)C-xTiB_(2)/Cu

引用

Journal of Wuhan University of Technology(materials Science) 2024年第5期39卷 1116-1120页

作者： HU Dong ZHANG Xin ZHANG Jinyong LEI Liwen State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Hubei Key Laboratory of Theory and Application of Advanced Materials Mechanics Wuhan University of TechnologyWuhan 430070China

The wetting behavior of molten Cu on the B_(4)C-xTiB_(2)ceramic composites was investigated in this *** results show that the contact angle of molten Cu alloy on B_(4)C-TiB_(2)ceramic composites is linear with the composition rate of TiB_(2)or B_(4)C while the temperature is in the range of 1300 to 1350℃,consistent with the expectation of the commonly used theoretical ***,a nonlinear relationship between the contact angle and the composition rate unexpectedly occurred at temperatures ranging from 1400 to 1500℃.The big difference of the contact angles between the molten metal and the components in the composites was found to be the key *** result identifies that the commonly used theoretical method only works at a limited difference of the contact angle of the liquid on the different phases in the composites,and fails at a big difference.

关键词： wetting B_(4)C-TiB_(2) composites interfacial reaction

来源：评论

学校读者我要写书评

暂无评论

Photoexcitation-induced passivation of SnO2 thin film for efficient perovskite solar cells

引用

National Science Review 2023年第11期10卷 183-191页

作者： Nianyao Chai Xiangyu Chen Zhongle Zeng Ruohan Yu Yunfan Yue Bo Mai Jinsong Wu Liqiang Mai Yi-Bing Cheng Xuewen Wang State Key Laboratory of Advanced Technology for Materials Synthesis and Processing International School of Materials Science and EngineeringWuhan University of Technology National Energy Key Laboratory for New Hydrogen-Ammonia Energy Technologies Foshan Xianhu Laboratory

A high-quality tin oxide electron transport layer(ETL) is a key common factor to achieve high-performance perovskite solar cells(PSCs). However, the conventional annealing technique to prepare high-quality ETLs by continuous heating under near-equilibrium conditions requires high temperatures and a long fabrication time. Alternatively, we present a non-equilibrium, photoexcitation-induced passivation technique that uses multiple ultrashort laser pulses. The ultrafast photoexcitation and following electron–electron and electron–phonon scattering processes induce ultrafast annealing to efficiently passivate surface and bulk defects, and improve the crystallinity of Sn O2, resulting in suppressing the carrier recombination and facilitating the charge transport between the ETL and perovskite interface. By rapidly scanning the laser beam, the annealing time is reduced to several minutes, which is much more efficient compared with conventional thermal annealing. To demonstrate the university and scalability of this technique, typical antisolvent and antisolvent-free processed hybrid organic–inorganic metal halide PSCs have been fabricated and achieved the power conversion efficiency(PCE) of 24.14% and 22.75% respectively, and a12-square-centimeter module antisolvent-free processed perovskite solar module achieves a PCE of 20.26%,with significantly enhanced performance both in PCE and stability. This study establishes a new approach towards the commercialization of efficient low-temperature manufacturing of PSCs.

关键词： photoexcitation-induced passivation ultrafast laser carrier management electron transport layer perovskite solar cells

来源：评论

学校读者我要写书评

暂无评论

Mitigated lattice distortion and oxygen loss of Li-rich layered cathode materials through anion/cation regulation by Ti^(4+)-substitution

引用

Chinese Chemical Letters 2024年第2期35卷 548-552页

作者： Kaicheng Zhang Yu Tian Xuanjin Chen Shan Hu Zelang Jian State Key Laboratory of Advanced Technology for Materials Synthesis and Processing School of Materials Science and EngineeringWuhan University of TechnologyWuhan 430070China

Lithium-rich layered cathode material(LLM)can meet the requirement of power lithium-ion energy storage devices due to the great energy ***,the de/intercalation of Li+will cause the irreversible loss of lattice oxygen and trigger transition metal(TM)ions migrate to Li+vacancies,resulting in capacity *** we brought Ti4+in substitution of TM ions in Li_(1.2)Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2),which could stabilize structure and expand the layer spacing of ***,optimized Ti-substitution can regulate the anions and cations of LLM,enhance the interaction with lattice oxygen,increase Ni^(3+) and Co^(3+),and improve Mn^(4+) coordination,improving reversibility of oxygen redox activation,maintaining the stable framework and facilitating the Li^(+) ***,we found 5%Ti-substitution sample delivered a high discharge capacity of 244.2 mAh/g at 50 mA/g,an improved cycling stability to 87.3%after 100 cycles and enhanced rate *** Ti-substitution gives a new pathway to achieve high reversible cycle retention for LLMs.

关键词： Lithium-rich layered cathode material Ti-substitution Anion/cation regulation Structural stability Cycling stability

来源：评论

学校读者我要写书评

暂无评论

Mussel-inspired Methacrylic Gelatin-dopamine/Ag Nanoparticles/Graphene Oxide Hydrogels with Improved Adhesive and Antibacterial Properties for Applications as Wound Dressings

引用

Journal of Wuhan University of Technology(materials Science) 2024年第2期39卷 512-521页

作者：宿正楠 HU Yanru MENG Lihui OUYANG Zhiyuan LI Wenchao ZHU Fang XIE Bin 吴庆知 State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Biomedical Material and Engineering Center of Hubei ProvinceWuhan University of TechnologyWuhan 430070China

A novel strategy was developed to prepare the methacrylic gelatin-dopamine(GelMA-DA)/Ag nanoparticles(NPs)/graphene oxide(GO) composite hydrogels with good biocompatibility,mechanical properties,and antibacterial ***-inspired DA was utilized to modify the GelMA molecules,which imparts good adhesive performance to the ***,interfacial enhancer,not only improves mechanical properties of the hydrogels,but also provides anchor sites for loading Ag NPs through numerous oxygencontaining functional groups on the *** experimental results show that the GelMA/Ag NPs/GO hydrogels have good biocompatibility,and exhibit a swelling rate of 202±16%,the lap shear strength of 147±17 kPa,and compressive modulus of 136±53 kPa,in the case of the Ag NPs/GO content of 2 mg/*** activity of the hydrogels against both gram-negative and gram-positive bacteria is dependent on the Ag NPs/GO content derived from the release of Ag^(+).Furthermore,the GelMA/Ag NPs/GO hydrogels possess good adhesive ability,which is resistant to highly twisted state when stuck on the surface of *** results demonstrate promising potential of the GelMA-DA/Ag NPs/GO hydrogels as wound dressings for biomedical applications in clinical and emergent treatment.

关键词： GelMA dopamine,graphene oxide adhesion antibacterial ability

来源：评论

学校读者我要写书评

暂无评论

Chloride ion battery:A new emerged electrochemical system for next-generation energy storage

引用

Journal of Energy Chemistry 2024年第1期88卷 154-168,I0004页

作者： Shulin Chen Lu Wu Yu Liu Peng Zhou Qinyou An Liqiang Mai State Key Laboratory of Advanced Technology for Materials Synthesis and Processing School of Materials Science and EngineeringWuhan University of TechnologyWuhan 430070HubeiChina State Key Laboratory of Refractories and Metallurgy Institute of Advanced Materials and NanotechnologyWuhan University of Science and TechnologyWuhan 430081HubeiChina

In the scope of developing new electrochemical concepts to build batteries with high energy density,chloride ion batteries(CIBs)have emerged as a candidate for the next generation of novel electrochemical energy storage technologies,which show the potential in matching or even surpassing the current lithium metal batteries in terms of energy density,dendrite-free safety,and elimination of the dependence on the strained lithium and cobalt ***,the development of CIBs is still at the initial stage with unsatisfactory performance and several challenges have hindered them from reaching *** this review,we examine the current advances of CIBs by considering the electrode material design to the electrolyte,thus outlining the new opportunities of aqueous CIBs especially combined with desalination,chloride redox battery,*** respect to the developing road of lithium ion and fluoride ion batteries,the possibility of using solid-state chloride ion conductors to replace liquid electrolytes is tentatively *** beyond,perspectives and clear suggestions are concluded by highlighting the major obstacles and by prescribing specific research topics to inspire more efforts for CIBs in large-scale energy storage applications.

关键词： Chloride ion battery Anion shuttling Conversion reaction Chloride redox

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：