检索结果-内蒙古大学图书馆

High-Performance Ag_(2)Se/Methyl Cellulose Thermoelectric Composites for Flexible Power Generators

Energy material Advances 2024年第1期5卷 275-282页

作者： Zuo Xiao Qiufeng Meng Yong Du Ping Wei Jie Qin Jingyu Chen Zhongchang Wang Per Eklund School of Materials Science and Engineering Shanghai Institute of Technology100 Haiquan RoadShanghai 201418China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China The Center of Functional Materials for Working Fluids of Oil and Gas Field School of New Energy and MaterialsSouthwest Petroleum UniversityChengdu 610500China Sichuan Engineering Technology Research Center of Basalt Fiber Composites Development and Application State Key Laboratory of Oil and Gas Reservoir Geology and ExploitationSouthwest Petroleum UniversityChengdu 610500SichuanChina International Iberian Nanotechnology Laboratory Av.Mestre Jose Veiga s/n4715-330 BragaPortugal Thin Film Physics Division Department of PhysicsChemistry and Biology(IFM)Linköping UniversitySE-58183 LinköpingSweden

Flexible thermoelectric generators(FTEGs)offer a promising solution for powering wearable electronics,while their practical applications are mainly obstructed by the moderate properties of flexible thermoelectric(TE)***,flexible Ag_(2)Se nanowire(NW)/methyl cellulose(MC)composite films were developed via facile screen-printing technology combined with cold pressing and annealing treatment,and a highest power factor of 1,641.58μW m^(-1)K^(-2)at 360 K was *** reasons for the high TE performance of the Ag_(2)Se NW/MC composite films were because,after the annealing treatment,the Ag_(2)Se NWs were sintered to form conductive network structures,the crystallinity of Ag_(2)Se was markedly enhanced,and the content of insulating phase MC in the composite film was *** Ag_(2)Se NW/MC composite film held appreciable flexibility,as its room-temperature power factor(1,312.08μW m^(-1)K^(-2))can retain~93%after bending for 1,000 cycles at a radius of 4 ***,the assembled FTEG consisting of 4 strips can generate a maximal power density of 3.51 W m^(-2)at a temperature difference of 14.1 *** results open an effective and large-scale strategy for fabricating high-performance flexible TE materials and energy-harvesting devices.

关键词： annealing treatment cold pressing Ag Se nanowires methyl cellulose flexible thermoelectric generators ftegs offer thermoelectric composites flexible thermoelectric generators power factor

来源：评论

学校读者我要写书评

暂无评论

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

引用

Chinese Chemical Letters 2021年第1期32卷 535-538页

作者： Bingshuai Liu Huang Zhou Huihui Jin Jiawei Zhu Zhe Wang Chenxi Hu Lvhan Liang Shichun Mu Daping He State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Hubei Engineering Research Center of RF-Microwave Technology and Application Wuhan University of TechnologyWuhan 430070China

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass ***,the security risks,time-consuming and high cost of the preparation process hinder its further ***,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming ***,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_(1/2)) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s *** development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.

关键词： Negative pressure Cobalt zeolitic imidazolate framework Cobalt and nitrogen co-doped Carbon nanotubes Oxygen reduction reaction

来源：评论

学校读者我要写书评

暂无评论

Defect Engineering on Carbon‑Based Catalysts for Electrocatalytic CO2 Reduction

引用

Nano-Micro Letters 2021年第1期13卷 56-78页

作者： Dongping Xue Huicong Xia Wenfu Yan Jianan Zhang Shichun Mu College of Materials Science and Engineering Zhengzhou UniversityZhengzhou 450001People’s Republic of China State Key Laboratory of Inorganic Synthesis and Preparative Chemistry and College of ChemistryJilin University2699 Qianjin StreetChangchun 130012People’s Republic of China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070People’s Republic of China

Electrocatalytic carbon dioxide(CO2)reduction(ECR)has become one of the main methods to close the broken carbon cycle and temporarily store renewable energy,but there are still some problems such as poor stability,low activity,and *** the most promising strategy to improve ECR activity is to develop electrocatalysts with low cost,high activity,and long-term ***,defective carbon-based nanomaterials have attracted extensive attention due to the unbalanced electron distribution and electronic structural distortion caused by the defects on the carbon ***,the present review mainly summarizes the latest research progress of the construction of the diverse types of defects(intrinsic carbon defects,heteroatom doping defects,metal atomic sites,and edges detects)for carbon materials in ECR,and unveil the structure-activity relationship and its catalytic *** current challenges and opportunities faced by high-performance carbon materials in ECR are discussed,as well as possible future *** can be believed that this review can provide some inspiration for the future of development of high-performance ECR catalysts.

关键词： Electrocatalytic CO2 reduction Carbon-based nanomaterials Intrinsic defects Heteroatom doping defects Metal atomic sites

来源：评论

学校读者我要写书评

暂无评论

Perfluorosulfonic acid proton exchange membrane with double proton site side chain for high-performance fuel cells at low humidity

引用

Journal of materials Science & technology 2023年第35期166卷 155-163页

作者： Hongyun Tan Shengqiu Zhao S.Eltahir Ali Shuhong Zheng Abdullah K.Alanazi Rui Wang Haining Zhang Hala M.Abo-Dief Ben Bin Xu Hassan Algadi Handong Li Priyanka Wasnik Zhanhu Guo Haolin Tang State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Department of Science and Technology University College-RanyahTaif UniversityP.O.Box 11099Taif 21944Saudi Arabia Department of Chemistry College of ScienceTaif UniversityP.O.Box 11099Taif 21944Saudi Arabia Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory Xianhu Hydrogen ValleyFoshan 528200China Integrated Composites Laboratory(ICL) Mechanical and Construction EngineeringNorthumbria UniversityNewcastle Upon Tyne NE18STUK College of Materials Science and Engineering Taiyuan University of Science and TechnologyTaiyuan 030024China Department of Electrical Engineering Faculty of EngineeringNajran UniversityNajran11001Saudi Arabia

Structural optimization of ionomers is an effective strategy for achieving high-performance proton ex-change membranes(PEMs)under low relative humidity(RH)*** this study,sulfonimide group and trifluoromethanesulfonate acid(TFSA)ionic liquids were introduced to the perfluorosulfonic acid(PFSA)side chain,resulting in polymer membranes with varying chain lengths(i.e.,PFC_(2)-TF-SI,PFC_(4)-TF-SI,and PFC_(5)-TF-SI).This dual proton-conducting structure extended the length of the hydrophilic side chain and enhanced the hydrophobic-hydrophilic phase separation,aiding in the formation of proton transport ***,the proton conductivity of PFC_(5)-TF-SI and PFC_(2)-TF-SI membranes reached 7.1 and 10.6 mS/cm at 30%RH and 80℃,respectively,which were approximately 29.1%and 92.7%higher than that of the pristine PFC_(5)-SA membrane(5.5 mS/cm).Furthermore,the maximum power density of the PFC_(5)-TF-SI and PFC_(2)-TF-SI membranes from the built single fuel cell achieved 649 and 763 mW/cm^(2) at 30%RH and 80℃,respectively,which were higher than that of the pristine PFC_(5)-SA membrane(567 mW/cm^(2))by about 14.5%and 34.6%,***,this study provides a strategy for PEM design under low RH conditions.

关键词： Proton exchange membrane Structural design Dual proton conduction Hydrophilic channel Proton conductivity Fuel cells

来源：评论

学校读者我要写书评

暂无评论

Vacancy-Based Defect Regulation for High Thermoelectric Performance in Ge9Sb2Te12-x Compounds

引用

ACS APPLIED materialS & INTERFACES 2020年第17期12卷 19664-19673页

作者： Chen, Shuo Bai, Hui Li, Junjie Pan, Wenfeng Jiang, Xianyan Li, Zhi Chen, Zhiquan Yan, Yonggao Su, Xianli Wu, Jinsong Uher, Ctirad Tang, Xinfeng State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan 430070 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan 430070 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan 430070 China Hubei Nuclear Solid Physics Key Laboratory Department of Physics Wuhan University Wuhan 430072 China Hubei Nuclear Solid Physics Key Laboratory Department of Physics Wuhan University Wuhan 430072 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan 430070 China Hubei Nuclear Solid Physics Key Laboratory Department of Physics Wuhan University Wuhan 430072 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan 430070 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan 430070 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan 430070 China Department of Physics University of Michigan Ann Arbor Michigan 48109 United States State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan 430070 China

Defect engineering is the core strategy for improving thermoelectric properties. Herein, cation doping along with modulation of cation vacancy has been developed in GeTe-based materials as an effective method to induce vacancy-based defects to boost their thermoelectric performance. A series of ternary compounds of Ge9Sb2Te12-x (x = 0, 0.03, 0.06, 0.09, 0.12, 0.15) was prepared by vacuum-melting and annealing combined with the spark plasma sintering (SPS) process. The role of Sb doping and cation vacancy on thermoelectric properties was systematically investigated. It is found that alloying Sb2Te3 into GeTe increases the concentration of cation vacancies, which is corroborated by both positron annihilation measurements and theoretical calculations. The vacancies, stacking faults, and planar defect interactions determine the thermoelectric transport properties. Adjusting the deficiency of Te effectively tunes the concentration of cation vacancies and dopant defects in the structure. In turn, this tunes the carrier concentration close to its optimum. A high power factor of 32.6 mu W cm(-1) K-2 is realized for Ge9Sb2Te11.91 at 725 K. Moreover, large strains induced by the defect structures, including Sb dopant, vacancy, staking faults, as well as planar defects intensify phonon scattering, leading to a significant decrease in the thermal conductivity from 7.6 W m(-1) K-1 for pristine GeTe to Ge9Sb2Te11.85 at room temperature. All of the above contribute to a high ZT value of 2.1 achieved for the Ge9Sb2Te11.91 sample at 775 K.

关键词： GeTe-based compounds alloying with Sb2Te3 deficiency of Te stacking fault vacancy plane thermoelectric

来源：评论

学校读者我要写书评

暂无评论

Ductile-Brittle Transition Mechanism of Highly-Oriented 3c-Sic in Elid

SSRN

引用

SSRN 2024年

作者： Li, Hengyi Xu, Qingfang Zhang, Chitengfei Yang, Meijun Tu, Rong Zhang, Song Hubei Longzhong laboratory Xiangyang441000 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China Wuhan University of Technology China

Compared with sintered silicon carbides (SiC), highly-orientated 3C-SiC by CVD methods boasts out-of-plane orientation uniformity, which ensures that such materials produce lower surface damage. Through the ELID grinding technique, the differences in grinding behaviors between and -orientated 3C-SiC were investigated. Both highly-orientated 3C-SiC exhibited a grinding surface where brittle and ductile removal coexisted. Specifically, brittle removal regions were observed at grain boundaries, while ductile removal regions were observed within the grains. Further indentation experiments between the two 3C-SiC show that -oriented 3C-SiC displayed a larger critical cut depth of 28.99 nm, with 1.5 times higher than that of -oriented 3C-SiC. The larger critical depth of cut contributes to more ductile removal regions with only a few brittle pits in the -oriented 3C-SiC grinding surface. In addition, the subsurface deformation of -oriented 3C-SiC was characterized by the presence of amorphous zones, dislocations and stacking faults. In contrast to the -oriented, the -oriented 3C-SiC tends to exhibit a brittle removal mode dominated by pits and cracks at the twin boundaries, as its pre-existing twins hinder the dislocation glide, resulting in stress concentration and thus forming cracks. © 2024, The Authors. All rights reserved.

关键词： Silicon carbide

来源：评论

学校读者我要写书评

暂无评论

Capacity Optimization of Hybrid Energy Storage System Based on Hysteresis Energy Management Strategy

Capacity Optimization of Hybrid Energy Storage System Based ...

引用

IEEE Annual Southern Power Electronics Conference (SPEC)

作者： Wenlong Yang Minwang Wang Wenchao Zhu Changjun Xie Hubei Key Laboratory of Advanced Technology for Automotive Components Wuhan University of Technology Wuhan China School of Automation Wuhan University of Technology Wuhan China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan China

ISBN: (数字)9798350351156

ISBN: (纸本)9798350351163

This study improves the hydrogen energy module of the hydrogen-electric coupling system and proposes a hybrid hydrogen storage system structure based on Proton Exchange Membrane Electrolyzer (PEMEL), Alkaline Electrolyzer (ALKEL), and Proton Exchange Membrane Fuel Cell (PEMFC). Considering component startup and shutdown characteristics, dynamic operation, component degradation, and their impact on system reliability, a novel triple-hysteresis energy management strategy is proposed. The comprehensive optimization objectives include minimizing the Levelized Cost of Energy (LCOE), the Loss of Power Supply Probability (LPSP), and the Wind-Solar Curtailment to Load Energy Ratio (WSCLR). The optimal capacity configuration of the hybrid renewable energy system under the new energy management strategy was determined. The performance of the proposed strategy was analyzed and compared over short-term (1 year) and long-term (20 years) operations. The results indicate that the WSCLR of the ALKEL and PEMEL coupled structure is reduced by 83.3% compared to a single ALKEL system, and the LCOE and WSCLR are reduced by 2.1% and 3.5%, respectively, compared to a single PEMEL system. Compared to traditional energy management strategies, the new energy management strategy can reduce the LCOE, WSCLR, and LPSP by 2.7%, 45.0%, and 79.1%, respectively, over a 20-year long-term operation.

关键词： Protons Renewable energy sources System performance Hydrogen Lithium batteries Resource management Reliability Energy management Optimization Hysteresis

来源：评论

学校读者我要写书评

暂无评论

High-temperature deformation behavior and processing map of the as-cast Inconel 625 alloy

引用

Rare Metals 2021年第8期40卷 2083-2091页

作者： Zhi Jia Ze-Xi Gao Jin-Jin Ji De-Xue Liu Ting-Biao Guo Yu-Tian Ding School of Material Science and Engineering Lanzhou University of TechnologyLanzhou730050China Key State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals Lanzhou University of TechnologyLanzhou730050China School of Materials Engineering Lanzhou Institute of TechnologyLanzhou730050China

A short process of Inconel 625 alloy tube was developed to solve the problems of the traditional extrusion process,and particular attention was paid on the hot deformation behavior of the as-cast Inconel 625 *** hot compression experiments were performed to study the hot deformation behavior of Inconel 625 in the temperature range of 900-1200℃ and strain rate range of0.01-10.00 s^(-1) by *** hot compressed microstructure was examined to study the effects of temperature and strain rate on the microstructural characteristic by electron backscatter diffraction(EBSD).The results show that the processing maps were greatly influenced by the temperature rather than the strain *** is found that with the strain increasing,the instability zone gradually turned to the low-temperature and low strain rate area,while the range of high-temperature instability area *** optimum condition of the as-cast Inconel 625 alloy was determined as high strain rate region(temperature of1100-1200℃,strain rate of 1.00-10.00 s^(-1))with the dissipation efficiency of above *** illustrated by microstructural characteristic of EBSD analysis,the perfect dynamic recrystallization occurred and fine grain structure was obtained under this deformation conditions.

关键词： Inconel 625 Hot deformation behavior Constitutive equation Microstructure processing map

来源：评论

学校读者我要写书评

暂无评论

The effect of hierarchical single-crystal ZSM-5 zeolites with different Si/Al ratios on its pore structure and catalytic performance

引用

Frontiers of Chemical Science and Engineering 2021年第2期15卷 269-278页

作者： Yuexin Hou Xiaoyun Li Minghui Sun Chaofan Li Syed ul Hasnain Bakhtiar Kunhao Lei Shen Yu Zhao Wang Zhiyi Hu Lihua Chen Bao-Lian Su Laboratory of Living Materials at the State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China State Key Laboratory of Silicate Material for Architectures Wuhan University of TechnologyWuhan 430070China Laboratory of Inorganic Materials Chemistry(CMI) University of NamurB-5000 NamurBelgium Nanostructure Research Centre(NRC) Wuhan University of TechnologyWuhan 430070China Clare Hall University of CambridgeCambridgeCB39ALUK

Hierarchical single-crystal ZSM-5 zeolites with different Si/Al ratios(Hier-ZSM-5-x,where x=50,100,150 and 200)were synthesized using an ordered mesoporous carbon-silica composite as hard ***-ZSM-5-x exhibits improved mass transport properties,excellent mechanical and hydrothermal stability,and higher catalytic activity than commercial bulk zeolites in the benzyl alcohol self-etherification *** show that a decrease in the Si/Al ratio in hierarchical single-crystal ZSM-5 zeolites leads to a significant increase in the acidity and the density of micropores,which increases the final catalytic *** effect of porous hierarchy on the diffusion of active sites and the final catalytic activity was also studied by comparing the catalytic conversion after selectively designed poisoned acid *** poisoned Hier-ZSM-5-x shows much higher catalytic conversion than the poisoned commercial ZSM-5 zeolite,which indicates that the numerous intracrystalline mesopores significantly reduce the diffusion path of the reactant,leading to the faster diffusion inside the zeolite to contact with the acid sites in the micropores predominating in ZSM-5 *** study can be extended to develop a series of hierarchical single-crystal zeolites with expected catalytic performance.

关键词： hierarchical zeolites single crystalline interconnected pores improved diffusion performance benzyl alcohol self-etherification reaction

来源：评论

学校读者我要写书评

暂无评论

Long-term Unsupervised Prediction of Proton Exchange Membrane Fuel Cells Considering Voltage Recovery

Long-term Unsupervised Prediction of Proton Exchange Membran...

引用

IEEE Annual Southern Power Electronics Conference (SPEC)

作者： Jiarui Xue Wenchao Zhu Changjun Xie School of Automation Wuhan University of Technology Wuhan China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan China Hubei Key Laboratory of Advanced Technology for Automotive Components Wuhan University of Technology Wuhan China

ISBN: (数字)9798350351156

ISBN: (纸本)9798350351163

Predicting degradation behavior is both challenging and essential for the prognosis and health management of proton exchange membrane fuel cells (PEMFCs). This paper considers the voltage recovery phenomenon that occurs during the frequent start-stop cycles of PEMFCs and proposes a voltage recovery (VR) model to calculate and predict the value of voltage recovery. FC1 is used as a reference sample with fully known degradation, while FC2 is considered a cell in the degradation process. A Gate Recurrent Unit (GRU) neural network is employed to learn the mapping relationship between FC1 and FC2 and predict the state of health (SOH) of FC2. Finally, the prediction results from the VR model and the GRU neural network are combined to obtain the final prediction outcome. The proposed hybrid method effectively improves prediction performance by combining the local dynamic characteristics predicted by the VR model with the overall degradation trend predicted by the data-driven method, offering both improved accuracy and practical significance.

关键词： Degradation Protons Accuracy Neural networks Fuel cells Predictive models Market research Data models Power electronics Prognostics and health management

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：