检索结果-内蒙古大学图书馆

SSRN 2024年

作者： Hu, Yong Jia, Huibin Zhang, Xu Yang, Xiaokang Dong, Zhang School of Material Science and Engineering Lanzhou University of Technology Gansu Lanzhou730050 China State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals Lanzhou University of Technology Gansu Lanzhou730050 China State Key Laboratory of Nickel and Cobalt Resources Comprehensive Utilization Gansu Jinchang737100 China

The design and development of heat treatment regimes adapted to the L-PBFed alloy for specific service conditions have become a hot topic of research in the field of AM. This paper systematically studies the microstructure changes of the L-PBFed IN738LC alloy, solution treatment at 1250 °C for various durations (1 h, 3 h, 5 h), then aging at 850 °C for 24 h, using XRD, EBSD, SEM, STEM and EDS. The analysis focuses on the delayed recrystallization behavior of the alloy and discusses the selective precipitation rule of the M23C6 carbide on different types of grain boundaries during recrystallization. Additionally, the tensile deformation mechanism of the alloy before and after heat treatment is clarified. The results show that due to the pinning of carbide particles and the segregation of solute atoms, the migration and transformation of grain boundaries under the condition of 1250 °C/1 h are hindered during the initial stage of solid solution treatment, which accounts for the delayed recrystallization behavior, and the microstructure is mainly experiencing recovery. At 1250 °C/5 h, M23C6 carbides selectively precipitate at twin boundaries, accompanied by recrystallization. The samples treated at 1250 °C/1 h exhibit the highest yield strength (σYS=1305±21 MPa) and tensile strength (σUTS=1462±11 MPa) owing to the precipitation of γ′ phase. Moreover, the presence of sub-grain boundaries provides some plasticity (ΕEL=5.4±0.7%). The deformation mechanism shows that the as-built samples mainly experience planar dislocations slipping, while the heat-treated samples undergo stacking faults (SFs) shearing and anti-phase boundaries (APB) shearing. The dominant mechanism among these is APB shearing. © 2024, The Authors. All rights reserved.

关键词： Recrystallization (metallurgy)

来源：评论

学校读者我要写书评

暂无评论

Three-Dimensional Porous Polyimide Anode For High-Rate Lithium Ion Batteries

SSRN

引用

SSRN 2023年

作者： Zhang, Qiuyitong Wei, Zijie Xu, Yuexin Lv, Ning Li, Hanyang Tian, Tian Wang, Yadong Tang, Haolin Zhao, Xue State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory Xianhu Hydrogen Valley Foshan528200 China Xupu Central Primary School Yangzhou211400 China

Polymeric electrode materials suffer from poor electrical conductivity and slow transport kinetics, especially poor performance at high current density. Herein, a polyimide electrode structure with 3D ordered interconnected gradient pores is proposed for improving the lithium ion transport efficiency. The homogeneous mixed PMTA-PMMA composite is prepared by a simple one-pot method, and then the PMMA (polymethyl methacrylate) spherical porogenic agent is removed from it while synthesizing the polyimide material at high temperature to form a low curvature gradient pore structure. The large pores in the electrode can enhance the ion transport ability and improve the electrolyte infiltration rate, and the small pores can improve the active specific surface area and guide the deposition of lithium ions. The high specific capacity of 907mAh/g can be maintained even after 1000 cycles at 5A/g, which is about 3 times of the specific capacity of un-pored electrode material. This porous material with high active area and porosity is a potential electrode candidate for ultra-fast charging and discharging in lithium ion batteries, with high specific capacity and excellent cycling performance. © 2023, The Authors. All rights reserved.

关键词： Polyimides

来源：评论

学校读者我要写书评

暂无评论

Intrinsic ion migration-induced susceptible two-dimensional phase-transition memristor with ultralow power consumption

引用

Science Bulletin 2025年

作者： Qin, Lanhao Yu, Yimeng Fang, Cheng Liu, Yujie Zhu, Kaichen Ouyang, Decai Liu, Shenghong Song, Bailing Zhou, Ruochen Lanza, Mario Hu, Wenhua Wu, Jinsong Li, Yuan Zhai, Tianyou State Key Laboratory of Materials Processing and Die & Mould Technology School of Materials Science and Engineering Huazhong University of Science and Technology Wuhan430074 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China Center of Hydrogen Science State Key Laboratory of Metal Matrix Composites School of Materials Science and Engineering Innovation Center for Future Materials Shanghai Jiao Tong University Shanghai200240 China Physical Science and Engineering Division King Abdullah University of Science and Technology Thuwal23955-6900 Saudi Arabia School of Computer Science and Artificial Intelligence Wuhan University of Technology Wuhan430070 China

Two-dimensional (2D) phase-transition memristors have demonstrated transformative potential for neuromorphic computing, yet challenges like high power consumption, limited endurance, and crystal damage from external ion intercalation persist. Here, we introduce a novel 2D phase-transition memristor leveraging a paradigm-shifting mechanism by exploiting the ultrafast intrinsic Cu+ ion migration within Cu2S. This approach eliminates the need for external ion insertion, significantly reducing crystal damage and enabling exceptional cycling stability with over 400 DC cycles and 500 pulse cycles. The susceptible monoclinic-tetragonal phase-transition induced by intrinsic Cu+ migration achieves an unprecedented SET power consumption of 1 μW at 100 mV, significantly lower in currently reported phase-transition memristors. To further demonstrate the potential of intrinsic ion migration-induced (IIM) memristor, we simulated an IIM memristor crossbar array for image preprocessing in gesture recognition with a high SSIM value of 0.94, showcasing its potential for scalable neuromorphic hardware. This work establishes a new paradigm in low-power, high-performance phase-transition memristors, advancing their practical application in next-generation computing. © 2025 Science China Press

关键词： Memristor Neuromorphic device Two-dimensional materials

来源：评论

学校读者我要写书评

暂无评论

Synergistic Enhancement of Hot Corrosion Resistance and Mechanical Properties of In738lc Alloy Prepared by Selective Laser Melting

SSRN

引用

SSRN 2024年

作者： Hu, Yong Jia, Huibin Zhang, Xu Yang, Xiaokang Liu, Bo Xu, Jiayu Gao, Yubi Ding, Yutian Zhang, Dong School of Material Science and Engineering Lanzhou University of Technology Gansu Lanzhou730050 China State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals Lanzhou University of Technology Gansu Lanzhou730050 China State Key Laboratory of Nickel and Cobalt Resources Comprehensive Utilization Gansu Jinchang737100 China

In this study, the synergistic enhancement of hot corrosion resistance (900 °C, 75%Na2SO4+25%NaCl) and mechanical properties of IN738LC alloy prepared by SLM with various solution heat treatments followed by aging treatment are investigated. The results indicate that compared with as-built samples and ST1+AT samples, the M23C6 precipitation at the grain boundaries coupled with smaller γ′ phase distribution in the inner grain are conducive to the formation of thicker Cr2O3 outer layer and Al2O3 inner layer for the ST2+AT samples, which effectively hinder the diffusion of S and Cl elements penetrate to the matrix, enhancing the hot corrosion resistance. The ST2+AT samples (i.e. treated at super solid solution heat treatment) exhibit excellent mechanical properties of σYS = 1261 MPa, σUTS = 1360 MPa, σEL = 3.4% attributed to the small-sized γ′ phase and the re crystallization-induced grain refinement, which increased the yield strength of the alloy. © 2024, The Authors. All rights reserved.

关键词： Heat treatment

来源：评论

学校读者我要写书评

暂无评论

Construction of nickel cobalt sulfide nanosheet arrays on carbon cloth for performance-enhanced supercapacitor

引用

Journal of materials Science & technology 2020年第12期47卷 113-121页

作者： Tao Liu Jiahao Liu Liuyang Zhang Bei Cheng Jiaguo Yu State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyLuoshi Road 122Wuhan430070China School of Materials Science and Engineering Zhengzhou UniversityZhengzhou450001China

materials featured with self-supported three-dimensional network,hierarchical pores and rich electrochemical active sites are considered as promising electrodes for ***,a novel strategy for the growth of nickel-cobalt bisulfide(Ni Co S)nanosheets arrays on carbon cloth(CC)as supercapacitor electrodes is reported,involving deposition of two-dimensional metal-organic framework(MOF)precursors on the CC skeletons,conversion of MOF into nickel-cobalt layered double-hydroxide by ion exchange process and formation of Ni Co S by a sulfidation *** Ni Co S nanosheets with rough surface and porous structures are uniformly anchored on the CC *** unique architecture endows the composite(Ni Co S/CC)with abundant accessible active ***,robust electrical/mechanical joint between the nanosheets and the substrates is attained,leading to the improved electrochemical ***,an asymmetric supercapacitor device is constructed by using Ni Co S/CC and activated carbon as a positive electrode and a negative electrode,*** optimized device exhibits a high specific capacitance,large energy density and long cycle *** Ni Co S/CC electrode with intriguing electrochemical properties and mechanical flexibility holds great prospect for next-generation wearable devices.

关键词： Metal-organic framework Nickel sulfide Cobalt sulfide Carbon cloth Supercapacitor

来源：评论

学校读者我要写书评

暂无评论

High‑Energy and High‑Power Pseudocapacitor–Battery Hybrid Sodium‑Ion Capacitor with Na^(+) Intercalation Pseudocapacitance Anode

引用

Nano-Micro Letters 2021年第3期13卷 209-221页

作者： Qiulong Wei Qidong Li Yalong Jiang Yunlong Zhao Shuangshuang Tan Jun Dong Liqiang Mai Dong‑Liang Peng Department of Materials Science and Engineering Fujian Key Laboratory of Materials GenomeCollege of MaterialsXiamen UniversityXiamen 361005People’s Republic of China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070People’s Republic of China Shenzhen Geim Graphene Center Tsinghua Shenzhen International Graduate SchoolTsinghua UniversityShenzhen 518055People’s Republic of China Advanced Technology Institute University of SurreyGuildford Surrey GU27XHUK

High-performance and low-cost sodium-ion capacitors(SICs)show tremendous potential applications in public transport and grid energy ***,conventional SICs are limited by the low specific capacity,poor rate capability,and low initial coulombic efficiency(ICE)of anode ***,we report layered iron vanadate(Fe5V15O39(OH)9·9H2O)ultrathin nanosheets with a thickness of~2.2 nm(FeVO UNSs)as a novel anode for rapid and reversible sodium-ion *** to in situ synchrotron X-ray diffractions and electrochemical analysis,the storage mechanism of FeVO UNSs anode is Na+intercalation pseudocapacitance under a safe potential *** FeVO UNSs anode delivers high ICE(93.86%),high reversible capacity(292 mAh g^−1),excellent cycling stability,and remarkable rate ***,a pseudocapacitor–battery hybrid SIC(PBH-SIC)consisting of pseudocapacitor-type FeVO UNSs anode and battery-type Na3(VO)2(PO4)2F cathode is assembled with the elimination of presodiation *** PBH-SIC involves faradaic reaction on both cathode and anode materials,delivering a high energy density of 126 Wh kg^−1 at 91 W kg^−1,a high power density of 7.6 kW kg^−1 with an energy density of 43 Wh kg−1,and 9000 stable *** tunable vanadate materials with high-performance Na+intercalation pseudocapacitance provide a direction for developing next-generation highenergy capacitors.

关键词： Sodium-ion capacitors Pseudocapacitance Hybrid capacitors Two-dimensional materials Iron vanadate

来源：评论

学校读者我要写书评

暂无评论

Enhanced Ablative Resistance of C/C Composites with Densified Zrb2-Based Ceramics by Incorporation of Mo as Interface Layer

SSRN

引用

SSRN 2022年

作者： Zou, Hailiang Zhang, Jinyong Zou, Ji Ping, Hang Wang, Weimin Ren, Lin Fu, Zhengyi Zhang, Fan The State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China Hubei LongZhong Laboratory Xiangyang441100 China

ZrB 2 -ZrC-SiC-Mo-C/C (ZZS-Mo-C/C) composites were synthesised in this study using reaction spark plasma sintering at a low temperature. Furthermore, we investigated the densification process, microstructure, interfacial bonding, ablative properties, and underlying mechanism of the ZZS-Mo-C/C composites. Before and after ablation, the specimen exhibited excellent interfacial bonding, indicating that the presence of the Mo-foil transition layer enables an optimal connection between ZZS and C/C. Additionally, SEM analysis revealed that the ZZS ceramics had a dense structure, thereby preventing oxygen from diffusing further into the matrix. The results indicate that ZZS-Mo-C/C exhibits superior oxidation resistance when exposed to an oxygen-acetylene flame. © 2022, The Authors. All rights reserved.

关键词： Oxidation resistance

来源：评论

学校读者我要写书评

暂无评论

Microstructural Evolution of Defects Under Proton Irradiation in Porous Cu

SSRN

引用

SSRN 2024年

作者： Li, Honglin Wang, Hao Huang, Zhifeng Wen, Pin Yin, Guanchao Chen, Fei Hubei Longzhong Laboratory Xiangyang441106 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China International School of Materials Science and Engineering Wuhan University of Technology Wuhan430070 China Hubei Key Laboratory of Theory and Application of Advanced Materials Mechanics School of Science Wuhan University of Technology Wuhan430070 China State Key Laboratory of Solid Lubrication Lanzhou Institute of Chemical Physics Chinese Academy of Sciences Lanzhou730000 China

The high specific strength and exceptional thermal insulating properties of porous metals make them an ideal choice for aerospace structural components and thermal insulation materials. However, in the space environment, proton irradiation leads to the formation of voids, bubbles, and dislocation loops, significantly compromising their physical and mechanical properties. To date, there has been limited attention to the radiation resistance properties in research related to porous metals. This study conducted proton irradiation experiments with a total dose of 1×1017 ions/cm2 on porous Cu. This study discusses and explains the irradiation-induced damage characteristics on the surface of porous Cu before and after proton irradiation. This provides insights into the radiation damage mechanisms within the porous Cu ligaments and the hydrogen release behavior on the ligament surface. Cascade recoil and collision-induced thermal spike effects modify material defect characteristics and crystal structure. This study elucidates the defect evolution mechanism of porous materials under proton irradiation, offering new insights for the design of other radiation-resistant porous materials as protective materials for future advanced space probes. © 2024, The Authors. All rights reserved.

关键词： Radiation damage

来源：评论

学校读者我要写书评

暂无评论

A review of CoSb_(3)-based skutterudite thermoelectric materials

引用

Journal of advanced Ceramics 2020年第6期9卷 647-673页

作者： Zhi-Yuan LIU Jiang-Long ZHU Xin TONG Shuo NIU Wen-Yu ZHAO School of Materials Science and Engineering Anhui University of TechnologyMaanshan 243002China Key Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials Ministry of EducationAnhui University of TechnologyMaanshan 243002China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

The binary skutterudite CoSb_(3) is a narrow bandgap semiconductor thermoelectric(TE)material with a relatively flat band structure and excellent electrical ***,thermal conductivity is very high because of the covalent bond between Co and Sb,resulting in a very low ZT ***,researchers have been trying to reduce its thermal conductivity by the different optimization *** addition,the synergistic optimization of the electrical and thermal transport parameters is also a key to improve the ZT value of CoSb_(3) material because the electrical and thermal transport parameters of TE materials are closely related to each other by the band structure and scattering *** review summarizes the main research progress in recent years to reduce the thermal conductivity of CoSb_(3)-based materials at atomic-molecular scale and nano-mesoscopic *** also provide a simple summary of achievements made in recent studies on the non-equilibrium preparation technologies of CoSb_(3)-based materials and synergistic optimization of the electrical and thermal transport *** addition,the research progress of CoSb_(3)-based TE devices in recent years is also briefly discussed.

关键词： skutterudite CoSb_(3)-based materials lattice thermal conductivity synergistic optimization thermoelectric properties thermoelectric devices

来源：评论

学校读者我要写书评

暂无评论

Eutectic Electrolyte with Unique Solvation Structure for High-Performance Zinc-Ion Batteries (vol 62, 10.1002/anie.202303744, 2023)

引用

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION 2023年第22期62卷 e202206717页

作者： Geng, L. Meng, J. Wang, X. Han, C. Han, K. Xiao, Z. Huang, M. Xu, P. Zhang, L. Zhou, L. Mai, L. State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan 430070 P. R. China Department of Physical Science & Technology School of Science Wuhan University of Technology Wuhan 430070 P. R. China Hubei Longzhong Laboratory Xiangyang 441000 P. R. Hubei China

Zinc-ion batteries (ZIB) present great potential in energy storage due to low cost and high safety. However, the poor stability, dendrite growth, and narrow electrochemical window limit their practical application. Herein, we develop a new eutectic electrolyte consisting of ethylene glycol (EG) and ZnCl 2 for dendrite-free and long-lifespan ZIBs. The EG molecules participate in the Zn 2+ solvation via coordination and hydrogen-bond interactions. Optimizing the ZnCl 2 /EG molar ratio (1 : 4) can strengthen intermolecular interactions to form [ZnCl(EG)] + and [ZnCl(EG) 2 ] + cations. The dissociation–reduction of these complex cations enables the formation of a Cl-rich organic–inorganic hybrid solid electrolyte interphase film on a Zn anode, realizing highly reversible Zn plating/stripping with long-term stability of ≈3200 h. Furthermore, the polyaniline||Zn cell manifests decent cycling performance with ≈78 % capacity retention after 10 000 cycles, and the assembled pouch cell demonstrates high safety and stable capacity. This work opens an avenue for developing eutectic electrolytes for high-safety and practical ZIBs.

关键词： Deep Eutectic Solvents Dendrite-Free Zn Anodes Eutectic Electrolytes Solvation Structure Zinc-Ion Batteries

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：