检索结果-内蒙古大学图书馆

学校读者我要写书评

暂无评论

先进钠离子电池材料的前景与展望

Science Bulletin 2023年第20期68卷 2302-2306页

作者：谷振一王晓彤衡永丽张凯洋梁皓杰杨佳霖洪辉祥王鹏飞尤雅杜菲吴兴隆 MOE Key Laboratory for UV Light-Emitting Materials and Technology Northeast Normal UniversityChangchun 130024China Natural Sciences and Science Education National Institute of EducationNanyang Technological UniversitySingapore 637616Singapore State Key Laboratory of Electrical Insulation and Power Equipment School of Electrical EngineeringXi’an Jiaotong UniversityXi’an 710049China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Key Laboratory of Physics and Technology for Advanced Batteries(Ministry of Education) State Key Laboratory of Superhard MaterialsCollege of PhysicsJilin UniversityChangchun 130012China Department of Chemistry Northeast Normal UniversityChangchun 130024China Key Laboratory of Organo-Pharmaceutical Chemistry of Jiangxi Province Gannan Normal UniversityGanzhou 341000China

According to the reports of"Top Ten Emerging Technologies in Chemistry 2022"released by the International Union of Pure and Applied Chemistry,sodium-ion battery(SIB)technology is identified as a crucial emerging technology,indicating its promising development for future energy-storage applications[1].In practical applications,commercialized lithium-ion batteries(LIBs)with lithium cobalt oxide and ternary oxide as cathode materials have assumed a dominant position[2].However,these cathode materials of LIBs are highly dependent on expensive cobalt and nickel,rendering them less sustainable for grid-scale energy ***,cathode materials in SIBs appear more sustainable due to their lower dependence on ***,the strategic importance of reducing over-dependence on lithium resources cannot be ***,SIB technology can serve as one of the potential solutions to mitigate this issue[3].

关键词：钠离子电池 battery lithium

Influence of Lattice Strain on the Mechanical Properties of Cosb3 Skutterudites

学校读者我要写书评

暂无评论

SSRN 2023年

作者： Duan, Bo Li, Jialiang Zhang, Xiaolian Li, Guodong Ma, Yuxi Xu, Hao School of Civil Engineering & Architecture Wuhan Polytechnic University Wuhan430023 China Hubei Key Laboratory of Theory and Application of Advanced Materials Mechanics Wuhan University of Technology Wuhan430070 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China

Elemental doping has been widely employed to manipulate the electrical and thermal transport properties of thermoelectric materials, without considering the influence to mechanical properties. In skutterudites, electronegative S-dopants have been found to reduce the lattice thermal conductivity. However, the effect of the covalent S-Sb bond on the mechanical properties of CoSb3 skutterudites remains unexplored. Compressive strength, in particular, exhibits a significant reduction in S-doped skutterudites, measuring only 249 MPa, representing a nearly 50% decrease compared to binary skutterudites. Additionally, there is a noticeable drop in the elastic, bulk and shear modulus. With molecular dynamics calculations, the shear strength of S-doped skutterudites also follows a sharp drop at a small ultimate strain. The evolutions of atomic configurations reveal that the lattice strain induced by S-dopants softens the Sb-Sb bond, ultimately leading to structure collapse under low shear stress conditions. These findings underscore the necessity for a comprehensive approach to elemental doping in thermoelectric community. © 2023, The Authors. All rights reserved.

关键词： Strain

Hybrid architecture design enhances the areal capacity and cycling life of low-overpotential nanoarray oxygen electrode for lithium–oxygen batteries

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2020年第7期29卷 248-255,I0008页

作者： Liang Xiao Duo Wang Ming Li Bohua Deng Jinping Liu School of Chemistry Chemical Engineering and Life ScienceWuhan University of TechnologyWuhan 430070HubeiChina State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070HubeiChina

Transition metal oxide(TMO)nanoarrays are promising architecture designs for self-supporting oxygen electrodes to achieve high catalytic activities in lithium-oxygen(Li-O2)***,the poor conductive nature of TMOs and the confined growth of nanostructures on the limited surfaces of electrode substrates result in the low areal capacities of TMO nanoarray electrodes,which seriously deteriorates the intrinsically high energy densities of Li-O2 ***,we propose a hybrid nanoarray architecture design that integrates the high electronic conductivity of carbon nanoflakes(CNFs)and the high catalytic activity of Co3 O4 nanosheets on carbon cloth(CC).Due to the synergistic effect of two differently featured components,the hybrid nanoarrays(Co3 O4-CNF@CC)achieve a high reversible capacity of3.14 mA h cm-2 that cannot be achieved by only single ***,CNFs grown on CC induce the three-dimensionally distributed growth of ultrafine Co3 O4 nanosheets to enable the efficient utilization of ***,with the high catalytic efficiency,hybrid Co3 O4-CNF@CC also achieves a more prolonged cycling life than pristine TMO *** present work provides a new strategy for improving the performance of nanoarray oxygen electrodes via the hybrid architecture design that integrates the intrinsic properties of each component and induces the three-dimensional distribution of catalysts.

关键词： Hybrid architecture Nanoarray oxygen electrode Synergistic effect Three-dimensional current collector Lithium-oxygen batteries

Effect of Additive Content on Texture Evolution and Mechanical Properties of Si3N4 Ceramics Prepared by Hot Pressing

学校读者我要写书评

暂无评论

SSRN 2023年

作者： Shi, Yunwei He, Qianglong Wang, Aiyang Ren, Yichao Wang, Jinghan Wang, Hao Wang, Weimin Fu, Zhengyi State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China School of Materials Science and Engineering Wuhan University of Technology Wuhan430070 China Hubei Longzhong Laboratory Hubei Xiangyang441000 China

The purpose of this research is to investigate influence of additive content on sintering behavior, texture evolution and mechanical properties of Si3N4 ceramics systematically. Si3N4 ceramics with different additive contents are prepared by hot pressing at 1750 °C for 1h. XRD analysis confirms that the densification process is dominated by particle rearrangement instead of phase transformation. Grain morphology characterization demonstrates that additive content affects relative amount between textured [[EQUATION]]-Si3N4 grains and [[EQUATION]]-Si3N4 nuclei during initial sintering. During subsequent sintering, [[EQUATION]]-Si3N4 nuclei surrounded by residual liquid phase elongated randomly, and then weaken texture degree of Si3N4 ceramics. The texture degree of Si3N4 ceramics decreases first and then increases as additives increase steadily. Based on the CTE misfit model and the stochastic model of crack propagation, texture degree, residual stress and grain size have a synergistic effect on crack propagation behavior of [[EQUATION]]-Si3N4 ceramics. The outstanding flexural strength (1096 MPa) and fracture toughness (10.61 MPa[[EQUATION]]m1/2) is achieved in hot pressed SN21 with a relatively high texture degree (fL=0.213). © 2023, The Authors. All rights reserved.

关键词： Ductile fracture

Corrosion Behavior of Fexcrmnalcu High-Entropy Alloy in 0.5 M H2so4 Solution

学校读者我要写书评

暂无评论

SSRN 2024年

作者： Cui, Junpeng Feng, Li Ma, Chao Wang, Zhaoqing Zhao, Yanchun School of Material Science and Engineering Lanzhou University of Technology Lanzhou730050 China State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals Lanzhou University of Technology Lanzhou730050 China Key Laboratory of Solar Power System Gansu Jiuquan Vocational and Technical College Jiuquan735000 China

High-entropy alloys (HEAs) FexCrMnAlCu (x=0, 0.5, 1.0, 1.5, 2.0) were prepared using vacuum arc melting. X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses revealed that FexCrMnAlCu exhibits typical FCC and BCC structures. The BCC phase mainly consists of Cr, Mn, and Fe-rich dendritic (DR) structures, while the FCC phase is characterized by Cu-rich interdendritic (IR) structures. The addition of Fe did not alter the phase structure of the CrMnAlCu HEA, but it promoted the growth of the BCC phase while inhibiting the formation of the FCC phase. Immersion corrosion experiments and electrochemical tests showed varying corrosion behaviors among the alloys. The Fe0 alloy primarily exhibited corrosion in the interdendritic regions. The Fe0.5 alloy displayed interface corrosion between dendritic and interdendritic regions. The Fe1.0 alloy showed a coexistence of dendritic corrosion and interface corrosion. Both Fe1.5 and Fe2.0 alloys experienced severe selective corrosion of dendritic structures. This selective corrosion is attributed to the formation of the L12 phase within the dendritic structures, which, in conjunction with the BCC phase, resulted in galvanic corrosion. This phenomenon exacerbated the corrosion of dendritic structures in the FexCrMnAlCu HEAs. © 2024, The Authors. All rights reserved.

关键词： Corrosion resistance

Design and Strengthening Mechanism of Silver-Carbon Synergistic Reinforced Al Matrix Composites

学校读者我要写书评

暂无评论

SSRN 2023年

作者： Li, Junguo Yang, Xuebin Li, Peibo Zhang, Yang Luo, Guoqiang Shen, Qiang Sun, Yi State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China Chaozhou Branch of Chemistry and Chemical Engineering Guangdong Laboratory Chaozhou521000 China Hubei Longzhong Laboratory Hubei Xiangyang441000 China

Owing to inadequate interface contact between carbon and aluminum, enhancing the Al/C interface is crucial for the fabrication of high-performance Al matrix composites. This study selected polyvinyl butyral (PVB) with excellent dispersion properties as the carbon source. Simultaneously introducing silver to achieve synergistic reinforcement between silver and carbon in Al matrix composites, offering a novel reinforcement approach for Al matrix composites. The Al-16Ag-C composite is fabricated through the in-situ pyrolysis of PVB followed by hot pressing sintering. Subsequently, the effect of temperature on the microstructural evolution and mechanical properties of the composite is investigated. Microstructural characterization demonstrates the formation of two alloy phases, namely Ag2Al and Al4C3, within the Al-16Ag-C composite. The alloy phases, distributed at the grain boundaries, enhance the material’s strength by impeding dislocation motion, increasing dislocation density within the matrix, and limiting grain growth. The Al-16Ag-C composite, sintered at 630 °C, exhibits a remarkable ultimate tensile strength of 481 MPa and an elongation of 22.25%, representing a significant enhancement compared to pure Al. © 2023, The Authors. All rights reserved.

关键词： Polyvinyl butyral

Metal Alkoxides: A New Type of Reversible Anode materials for Stable and High-Rate Lithium-Ion Batteries

学校读者我要写书评

暂无评论

SSRN 2024年

作者： Huang, Shaozhuan Deng, Chengjiang Ma, Liuyuan Liu, Jiayan Han, Xiaoyan Zhang, Qing Jin, Jun Li, Yu Key Laboratory of Catalysis and Energy Materials Chemistry of Ministry of Education Hubei Key Laboratory of Catalysis and Materials Science South-Central Minzu University Wuhan430074 China Faculty of Materials Science and Chemistry China University of Geosciences Wuhan430074 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China

Metal-organic compounds have attracted significant attention for lithium-ion battery (LIB) anodes. However, their practical application is severely hindered by the poor structure stability and sluggish Li+ reaction kinetics. Here, we proposed a new type of metal-organic compound, metal alkoxides, for high-performance LIBs. A series of metal-alkoxide/graphene composites with different transition metal centers and alkoxide anions are prepared to investigate the structural stability, Li-storage ability, and Li+ diffusion kinetics. The results reveal that the metal centers and alkoxide anions have significant influence on the structural stability, molecular weight, and electronic structures, which are highly related to the Li-storage performance. Among them, Co-EG/rGO (EG represents the ethylene glycol anion) delivers the best performance involving high specific capacity (975 mAh g-1 at 0.2 A g-1), excellent rate capability (400.8 mAh g-1 at 10 A g-1), and stable cycling performance (86.8% capacity retention after 600 cycles) due to its stable structure, smaller molecular weight, and favorable electronic structure. Moreover, the Li-storage mechanism and solid electrolyte interphase (SEI) evolution of the Co-EG/rGO electrode are studied in detail through multiple ex-situ/in-situ characterizations. This work provides a new type of metal alkoxide anode material for high-rate and long-life LIBs toward practical energy applications. © 2024, The Authors. All rights reserved.

关键词： Lithium-ion batteries

Effect of Ni content in Cu_(1-x)Ni_(x) coating on microstructure evolution and mechanical properties of W/Mo joint via low-temperature diffusion bonding

学校读者我要写书评

暂无评论

Journal of materials Science & technology 2020年第19期54卷 171-180页

作者： Mei Rao Guoqiang Luo Jian Zhang Yiyu Wang Qiang Shen Lianmeng Zhang State Key Lab of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan430070China Materials Science and Technology Division Oak Ridge National LaboratoryOak RidgeTN37831-6064USA

The 93 W and Mo1 refractory metals were bonded with different Cu_(1-x)Ni_(x) coating interlayers of various Ni content using plasma-activated sintering at 700℃.The effects of the Ni content in the Cu_(1-x)Ni_(x) coating interlayer on the interfacial microstructure evolution and mechanical properties of the W/Mo joints were *** maximum average shear strength of the W/Mo joint was 316.5 MPa when the Ni content of the Cu_(1-x)Ni_(x) coating interlayer was 25%.When the Ni content of the Cu_(1-x)Ni_(x) coating interlayer was below 50%,the atomic diffusion at the W/Mo joint interface was adequate without the formation of intermetallic compounds,as demonstrated by the High Resolution Transmission Electron Microscope analyses of the *** presence of Ni in Cu_(1-x)Ni_(x) promoted diffusion bonding at the interface,which contributed to the high mechanical properties of the W/Mo *** an increase in the Ni content of the Cu_(1-x)Ni_(x) coating interlayer,the Mo Ni intermetallic compound(IMC)nucleated and grew at the Cu1-xNix coating/Mo1 *** the Ni content of the Cu_(1-x)Ni_(x) coating interlayer was above 50%,the generation of a brittle Mo Ni IMC weakened the shear strength of the W/Mo joint dramatically.

关键词： Refractory metal Cu_(1-x)Ni_(x)coating interlayer Solid solution MoNi IMC Microstructure Shear strength

High-entropy ceramics:Present status,challenges,and a look forward

学校读者我要写书评

暂无评论

Journal of advanced Ceramics 2021年第3期10卷 385-441页

作者： Huimin XIANG Yan XING Fu-zhi DAI Hongjie WANG Lei SU Lei MIAO Guojun ZHANG Yiguang WANG Xiwei QI Lei YAO Hailong WANG Biao ZHAO Jianqiang LI Yanchun ZHOU Science and Technology on Advanced Functional Composite Laboratory Aerospace Research Institute of Materials&Processing TechnologyBeijing 100076China New Energy Technology Engineering Laboratory of Jiangsu Province Nanjing University of Posts and TelecommunicationsNanjing 210023China State Key Laboratory for Mechanical Behavior of Materials Xi’an Jiaotong UniversityXi’an 710049China Guangxi Key Laboratory of Information Materials Guangxi Collaborative Innovation Center of Structure and Property for New Energy and MaterialSchool of Material Science and EngineeringGuilin University of Electronic TechnologyGuilin 541004China Institute of Functional Material College of Material Science and EngineeringDonghua UniversityShanghai 201620China Institute of Advanced Structure Technology Beijing Institute of TechnologyBeijing 100081China College of Metallurgy and Energy North China University of Science and TechnologyTangshan 063210China College of Material Science and Engineering Shenzhen UniversityShenzhen 518060China School of Materials Science and Engineering Zhengzhou UniversityZhengzhou 450001China Henan Key Laboratory of Aeronautical Materials and Application Technology School of Material Science and EngineeringZhengzhou University of AeronauticsZhengzhou 450046China National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology CAS Key Laboratory of Green Process and EngineeringInstitute of Process EngineeringChinese Academy of SciencesBeijing 100190China

High-entropy ceramics (HECs) are solid solutions of inorganic compounds with one or more Wyckoff sites shared by equal or near-equal atomic ratios of multi-principal *** in the infant stage,the emerging of this new family of materials has brought new opportunities for material design and property *** from metals,the diversity in crystal structure and electronic structure of ceramics provides huge space for properties tuning through band structure engineering and phonon *** from strengthening,hardening,and low thermal conductivity that have already been found in high-entropy alloys,new properties like colossal dielectric constant,super ionic conductivity,severe anisotropic thermal expansion coefficient,strong electromagnetic wave absorption,etc.,have been discovered in *** a response to the rapid development in this nascent field,this article gives a comprehensive review on the structure features,theoretical methods for stability and property prediction,processing routes,novel properties,and prospective applications of *** challenges on processing,characterization,and property predictions are also ***,future directions for new material exploration,novel processing,fundamental understanding,in-depth characterization,and database assessments are given.

关键词： high-entropy ceramics(HECs) processing structure properties applications