检索结果-内蒙古大学图书馆

synthesis and Characterization of CaF_2 Nanoparticles with Different Doping Concentrations of Er^(3+)

Nano-Micro Letters 2011年第2期3卷 73-78页

作者： Jinghong Song Guanglin Zhi Yan Zhang Bingchu Mei State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology

Calcium fluoride nanoparticles with various amounts of erbium ion dopants were prepared by CTAB/C_4 H_9OH/C_7H_(16)/H_2O reverse micro-emulsion *** nanoparticles were studied by X-ray diffraction(XRD),transmission electron microscopy(TEM),fourier transform infrared spectroscopy(FTIR),absorption and fluorescence *** XRD patterns indicate a typical cubic fluorite structure and no other *** results show the synthesized particles having uniform grain size and without *** spectra reveal that there are some amounts of-OH,NO_3^-and other organic functional groups on the particle surfaces before the annealing *** absorption peaks and bands are present in the absorption spectra,corresponding to the rich energy levels of erbium *** Red-Shift of absorption bands and Blue-Shift of fluorescence peaks can be attributed to the weakened energy level split as a result of the decrease in crystal field strength.

关键词： CaF2 Nanoparticles Doping Erbium ions

来源：评论

学校读者我要写书评

暂无评论

All-nanofiber self-powered electronic skin with electrospinning humidity-controlled structure for human muscle detection during fitness

引用

Composites Communications 2025年 57卷

作者： Wu, Songkai Zhao, Yi Wang, Jia Zhao, Xinxin Zhai, Wei Zhu, Xiaobo Wan, Pengbo Cui, Meijie Gao, Liang Dai, Kun Liu, Chuntai Shen, Changyu School of Materials Science and Engineering The Key Laboratory of Material Processing and Mold of Ministry of Education Zhengzhou University Henan Zhengzhou 450001 China State Key Laboratory of Advanced Marine Materials Ningbo Institute of Materials Technology and Engineering Chinese Academy of Sciences Ningbo 315201 China College of Materials Science and Engineering State Key Laboratory of Organic-Inorganic Composites Beijing University of Chemical Technology Beijing 100029 China

With the development of artificial intelligence and human-machine interaction technology, achieving all-nanofiber self-powered electronic skin (e-skin) with excellent sensing performance is still a challenge. In this work, polyvinylidene fluoride/polydimethylsiloxane (PVDF/PDMS) nanofiber membranes (PVPD-NFM) were prepared by optimizing the electrospinning humidity parameters. It is determined that when the humidity is 60 %, the roughness of the PVPD-NFM is 7.562 μm, and the content of β-phase is 64 %. After that, the content of PDMS was optimized. Compared with pure PVDF, when the content of PDMS was 42 wt%, the charge density increased from 1.6 μC/m² to 13.7 μC/m², which increased by 8.6 times, respectively. Furthermore, PVPD-NFM also possesses excellent breathability, hydrophobicity, and self-cleaning properties. Finally, the PVPD-NFM was fabricated into e-skin to detect muscle activity in fitness, indicating a promising application prospect in preventing sports injury. © 2025 Elsevier Ltd

关键词： Electrospinning Humidity-regulated structure Self-cleaning Self-powered e-skin

来源：评论

学校读者我要写书评

暂无评论

Alumina Ceramics Fabricated by in-situ Consolidation of Pre-gelling Starch

引用

Journal of Wuhan University of technology(materials Science) 2018年第3期33卷 758-766页

作者：朱田丽王友法 State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology

An in-situ consolidation method was developed and optimized to successfully fabricate alumina ceramics using pre-gelling starch. Our results showed that the obtained ceramics have more homogeneous microstructure, higher density, higher flexural strength, and favorable biocompatibility compared to the regular one. During the process, cornstarch granules swelled and deformed but no fracture was observed. After the cornstarch granules bursted, alumina particles were suspended uniformly in the three-dimensional network structure to generate a much smoother surface. Below 0.5 wt% higher cornstarch content increased the flexural strength of prepared ceramics, while above 0.5 wt% the mechanical properties were compromised. Therefore the cornstarch content of 0.5% was the optimal concentration to achieve the highest mechanical strength of the prepared ceramics, with a measured flexural strength of 341 MPa, and a relative density of 96.01%.

关键词： pre-gelling starch in-situ consolidation alumina-ceramic flexural strength biocompatibility

来源：评论

学校读者我要写书评

暂无评论

NiTi alloys with simultaneous equiaxed-grain strength and columnar-grain ductility manipulated by direct energy deposition

引用

Journal of Alloys and Compounds 2025年 1028卷

作者： Lu, Jiaqi Zhang, Chi Liu, Yang Huang, Zhifeng Hou, Huilong Huang, Aijun Chen, Fei State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China International School of Materials Science and Engineering Wuhan University of Technology Wuhan430070 China Hubei Longzhong Laboratory Xiangyang441106 China Chaozhou Branch of Chemistry and Chemical Engineering Guangdong Laboratory Chaozhou521000 China School of Materials Science and Engineering Beihang University Beijing100191 China Hangzhou310023 China Monash University Notting HillVIC3168 Australia

NiTi alloys prepared by additive manufacturing (AM) often have coarse columnar grains showing poor tensile superelasticity, strength, and ductility, significantly impairing part qualification and targeted applications. In this work, we used laser-engineered net shaping (LENS) to fabricate NiTi alloys with lamellar structures which consist of fine nearly equiaxed grains, columnar grains, and high-density dislocations, through periodically alternating processing parameters. This strategy can partially keep the equiaxed grains produced by the transformation from columnar grains to equiaxed grains (CET) at the top of the deposited layer, and interrupt the epitaxial growth of columnar grains in AM-ed NiTi alloys. The results show that NiTi alloys with lamellar structures exhibit an excellent combination of strength and ductility with a tensile strength of 649 MPa strain of 17.5 %, a maximum recovery strain of 5.3 %, and a stable recovery strain of 3.1 % after 20 cycles. Our findings may increase the range of adjustable microstructures and combinations of properties in NiTi alloys and provide a new idea for microstructure modification and reinforcement of AM shape memory alloy. © 2025 Elsevier B.V.

关键词： Tensile strain

来源：评论

学校读者我要写书评

暂无评论

5H-Fluoreno [3,2-b:6,7-b’] Dithiophene Based Non-fullerene Small Molecular Acceptors for Polymer Solar Cell Application

引用

Journal of Wuhan University of technology(materials Science) 2019年第5期34卷 1220-1227页

作者： WU Jiansheng XIAO Shengqiang State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology

Two novel non-fullerene small molecule acceptors were prepared with the conjugated backbone of 5 H-fluoreno[3, 2-b:6, 7-b’] dithiophene carrying the electron deficient unit of dicyanomethylene indanone(DICTFDT) and rhodanine(TFDTBR), respectively. The two acceptors exhibited excellent thermal stability and strong absorption in the visible region. The LUMO level is estimated to be at-3.89 eV for DICTFDT and-3.77 eV for TFDTBR. When utilized as the acceptor in bulk heterojunction polymer solar cells with the polymer donor of PBT7-Th, the optimized maximum power conversion efficiency of 5.12% and 3.95% was obtained for the device with DICTFDT and TFDTBR, respectively. The research demonstrates that 5 H-fluoreno[3, 2-b:6, 7-b’] dithiophene can be an appealing candidate for constructing small molecular electron acceptor towards efficient polymer:non-fullerene bulk heterojunction solar cells.

关键词： polymer solar cells bulk heterojunction non-fullerene acceptor

来源：评论

学校读者我要写书评

暂无评论

Mussel-inspired Methacrylic Gelatin-dopamine/Ag Nanoparticles/Graphene Oxide Hydrogels with Improved Adhesive and Antibacterial Properties for Applications as Wound Dressings

引用

Journal of Wuhan University of technology(materials Science) 2024年第2期39卷 512-521页

作者：宿正楠 HU Yanru MENG Lihui OUYANG Zhiyuan LI Wenchao ZHU Fang XIE Bin 吴庆知 State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Biomedical Material and Engineering Center of Hubei ProvinceWuhan University of TechnologyWuhan 430070China

A novel strategy was developed to prepare the methacrylic gelatin-dopamine(GelMA-DA)/Ag nanoparticles(NPs)/graphene oxide(GO) composite hydrogels with good biocompatibility,mechanical properties,and antibacterial ***-inspired DA was utilized to modify the GelMA molecules,which imparts good adhesive performance to the ***,interfacial enhancer,not only improves mechanical properties of the hydrogels,but also provides anchor sites for loading Ag NPs through numerous oxygencontaining functional groups on the *** experimental results show that the GelMA/Ag NPs/GO hydrogels have good biocompatibility,and exhibit a swelling rate of 202±16%,the lap shear strength of 147±17 kPa,and compressive modulus of 136±53 kPa,in the case of the Ag NPs/GO content of 2 mg/*** activity of the hydrogels against both gram-negative and gram-positive bacteria is dependent on the Ag NPs/GO content derived from the release of Ag^(+).Furthermore,the GelMA/Ag NPs/GO hydrogels possess good adhesive ability,which is resistant to highly twisted state when stuck on the surface of *** results demonstrate promising potential of the GelMA-DA/Ag NPs/GO hydrogels as wound dressings for biomedical applications in clinical and emergent treatment.

关键词： GelMA dopamine,graphene oxide adhesion antibacterial ability

来源：评论

学校读者我要写书评

暂无评论

Enhanced oxygen vacancies on yttrium oxide with cobalt oxide loaded for accelerating hydrogen production from ammonia decomposition

引用

Journal of Colloid and Interface Science 2025年 695卷 137732页

作者： Li, Qi Fan, Meiling Tang, Haibo Zhu, Yi Huang, Xiege Zhang, Haining Tang, Haolin Pan, Hongfei R&D Center of Materials and Stack Technology for Fuel Cell National Energy Key Laboratory for New Hydrogen-Ammonia Energy Technologies Foshan Xianhu Laboratory Foshan528200 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China Xiangyang Polytechnic Xiangyang441050 China Hubei Key Laboratory of Theory and Application of Advanced Materials Mechanics Wuhan University of Technology Wuhan430070 China Hubei Key Laboratory of Fuel Cell Wuhan University of Technology Nr. 122 Luoshi Rd. Wuhan430070 China

Ammonia decomposition for hydrogen production has become a critical process in the development of hydrogen economy. Non-noble based material possesses great potential of application in thermal catalysis due to its low cost and appreciable theoretical catalytic activity. However, the durability of non-noble metal catalysts under prolonged operation remains a significant challenge. Herein, the cobalt oxide supported on yttrium oxide catalysts with enhanced oxygen vacancies via co-precipitation was reported by using urea serving as a pH stabilizer, followed by annealing process in an inert atmosphere. The formation of enhanced oxygen vacancies was demonstrated accelerated the N[sbnd]H bond division and nitrogen recombination-desorption, thereby enhancing the efficiency of thermal catalytic decomposition of ammonia. Based on such advantages, the synthesized 50CoO/Y2O3 catalyst exhibited optimal NH3 decomposition performance, achieving an ammonia conversion rate of 98.6 % under a high gas hourly space velocity of 20,000 mL·gcat−1·h−1 with a hydrogen production rate of 22.3 mmol·gcat−1·min−1 at 550 °C. Moreover, the catalyst maintained a stable activity for 120 h without significantly degradation, suggesting non-noble based catalyst a potential competitor in hydrogen production from thermal catalytic ammonia decomposition. © 2025 Elsevier Inc.

关键词： Hydrogen production

来源：评论

学校读者我要写书评

暂无评论

Effect of Molecular Weight on Thermoelectric Performance of P3HT Analogues with 2-Propoxyethyl Side Chains

引用

Journal of Wuhan University of technology(materials Science) 2024年第2期39卷 268-281页

作者：董得福 WANG Wei ZHAN Chun LI Chenglong ZHOU Qisheng 肖生强 State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

By replacing hexyl chains in poly(3-hexylthiophene)(P3HT)with 2-propoxyethyls,four poly(3-(2-propoxyethyl)thiophene)(P3POET)homopolymers with comparable polydispersity indexes(PDI)and regioregularities were prepared herein in addition with step increment of about 7 kDa on numberaverage molecular weight(M_(n))from around 11 to 32 kDa(accordingly denoted as P11k,P18k,P25k,and P32k).When doped in film by FeCl_(3)at the optimized conditions,the maximum power factor(PF_(max))increases greatly from 4.3μW·m^(-1)·K^(-2)for P11k to 8.8μW·m^(-1)·K^(-2)for P18k,and further to 9.7μW·m^(-1)·K^(-2)for P25k,followed by a slight decrease to 9.2μW·m^(-1)·K^(-2)for *** close Seebeck coefficients(S)at PF_(max)are observed in these doped polymer films due to their consistent frontier orbital energy levels and Fermi *** main contribution to this PF_(max)evolution thus comes from the corresponding conductivities(σ).Theσvariation of the doped films can be rationally correlated with their microstructure evolution.

关键词： conjugated polymer molecular weight microstructure thermoelectric performance

来源：评论

学校读者我要写书评

暂无评论

A novel, green method for the preparation of biodegradable PLA membranes without pore-forming agent

引用

Journal of Water Process Engineering 2025年 74卷

作者： Cai, Jiayi Han, Zunbo Sun, Yinjie Chen, Haoran Li, Haoran Wang, Ruoxi Ji, Yanhong He, Benqiao State Key Laboratory of Separation Membranes and Membrane Processes School of Material Science and Engineering Tiangong University Tianjin 300387 China Cangzhou Institute of Tiangong University Cangzhou 061000 China Science and Technology on Advanced Functional Composite laboratory Aerospace Research Institute of Materials & Processing Technology Beijing 100076 China

Polylactic acid (PLA) membranes have attracted significant attention in separation technologies due to their biodegradable properties. This study proposes a novel and eco-friendly pore-forming strategy for fabricating PLA membranes by triggering the in situ reaction between CaCO₃ nanoparticles and citric acid during the phase inversion process. Unlike conventional methods requiring synthetic pore-forming additives, this approach leverages the sacrificial role of CaCO₃ and the reaction-generated CO₂ nanobubble to synergistically construct a porous structure. The overall porosity increases from 70.2 % (pristine PLA membrane, M0) to 85.6 % (membrane prepared from a 6 wt% CaCO₃-containing casting solution, M6), while pure water flux rises dramatically from 20.1 L·m⁻²·h⁻¹ to 218.3 L·m⁻²·h⁻¹, with bovine serum albumin rejection maintained at 96.8 %. Furthermore, the flux recovery rate improves from 53.2 % (M0) to 71.2 % (M6), demonstrating enhanced antifouling properties. This entirely green fabrication process, employing only natural CaCO₃ and citric acid, represents a significant advancement in sustainable membrane technology and provides a viable route for developing high-performance biodegradable separation membranes. © 2025 Elsevier Ltd

关键词： Biodegradable membrane CaCO3 nanoparticles Citric acid Polylactic acid

来源：评论

学校读者我要写书评

暂无评论

Hyaluronic acid methacrylate/laponite hydrogel loaded with BMP4 and maintaining its bioactivity for scar-free wound healing

引用

Regenerative Biomaterials 2023年第1期10卷 690-701页

作者： Likun Chang Yulong Xu Zhouying Wu Yichun Shao Dan Yu Wenyue Yang Liyuan Ye Xinyu Wang Binbin Li Yixia Yin State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

Scar-free wound healing is a challenging process due to the excessive deposition of extracellular matrix and *** overcome this issue,hydrogels with superior biochemical and mechanical properties have been used in combination with medicinal compounds as wound *** this study,a novel composite hydrogel consisting of double-crosslinked photocurable hyaluronic acid methacrylate(HAMA)and Laponite(Lap)loaded with bioactive bone morphogenetic protein 4(BMP4)was developed and thoroughly characterized for its properties such as degradation,morphology,porosity,compression,skin adhesion and load *** effect of the HAMA/Lap/BMP4 hydrogel was evaluated through both in vitro and in vivo *** the in vivo rabbit ear-scar model,the HAMA/Lap/BMP4 hydrogel dressing was found to reduce scar-related expressions ofα-SAM and decrease the ratio of collagenΙ/III in wounded ***,histopathological examination indicated that the HAMA/Lap/BMP4 hydrogel-treated groups exhibited enhanced wound repair and increased levels of collagen maintenance compared to other standard groups,ultimately leading to scarless wound ***,this sustained-release photocurable HAMA/Lap/BMP4 hydrogel offers a therapeutic approach for scar-free wound healing.

关键词： HAMA/Lap/BMP4 photocurable nanocomposite hydrogel sustained release scar-free wound healing

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：