检索结果-内蒙古大学图书馆

17th National Conference on Laser technology and Optoelectronics

作者： Xin, Yu Xu, Tao Wang, Yaozhi Luo, Peng Zhao, Wenhai Kang, Bin Jing, Wei Mei, Bingchu State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China Institute of Chemical Materials China Academy of Engineering Physics Mianyang621900 China

ISBN: (纸本)9781510661097

(Tb0.7Lu0.3)2O3 transparent ceramics were prepared by hydrogen pre-sintering and hot isostatic pressing treatment. ZrO2 was added as sintering aid to restrain the abnormal grain growth. The microstructure evolution and linear shrinkage changes of the (Tb0.7Lu0.3)2O3 transparent ceramics in the range of 1400℃~1700℃ were investigated. It can be seen from the results that the linear shrinkage of ceramics increased nonlinearly with the increase of the sintering temperature. In the range of 1550℃~1600℃, the (Tb0.7Lu0.3)2O3 ceramics had a higher shrinkage rate. And the shrinkage rate slowed down when the temperature exceeded 1600℃. The samples prepared by 1550℃ hydrogen pre-sintering combined with 1550℃ hot isostatic pressing sintering showed good optical property. The average grain size was about 1.69μm and the highest transmittance reached 74.81% @1064 nm. © 2022 SPIE.

关键词： Hydrogen

来源：评论

学校读者我要写书评

暂无评论

Microstructure and tribological properties of -oriented 3C-SiC by chemical vapor deposition

引用

Ceramics International 2025年

作者： Yang, Wenxuan Huang, Wei Li, Cuicui Wang, Chongjie Zhang, Chitengfei Tu, Rong Zhang, Song Hubei Longzhong Laboratory No.101 Luming Road Xiangyang441000 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China Hubei Technology Innovation Center for Advanced Composites Wuhan430070 China

Highly -oriented 3C-SiC coatings were fabricated by chemical vapor deposition method at different temperatures. As deposition temperature increased from 1473 K to 1773 K, the surface structure of -oriented 3C-SiC transitioned from hexagonal structure with sixfold symmetry to hill-like structure, and finally to conical porous surface composed of stacked short rods. Owing to alteration of surface structure, the hardness of 3C-SiC coatings presented a trend of initially increasing and subsequently decreasing. The 3C-SiC coating deposited at 1673 K possessed the highest hardness, with a value of 42.08 GPa. The average friction coefficient for 3C-SiC/Si3N4 pair ranged from 0.258 to 0.569. The wear rate and hardness exhibited opposite trends. Compared with 3C-SiC coatings prepared at the other three temperatures, the 3C-SiC coating deposited at 1573 K exhibited the lowest wear rate under loads of 5 N, 10 N, and 15 N. Furthermore, the lowest wear rate, recorded at 15 N, was 4.1 × 10−6 mm3/Nm, attributed to high hardness and uniform grain size. The wear mechanism of -oriented 3C-SiC coatings during dry sliding primarily involved fracture, leading to fatigue and third-body wear. © 2025 Elsevier Ltd and Techna Group S.r.l.

关键词： Rockwell hardness

来源：评论

学校读者我要写书评

暂无评论

Magnetic field-enhanced photoelectrochemical water splitting of Co_(3)O_(4)/TiO_(2)for efficient oxygen evolution

引用

Science China materials 2024年第10期67卷 3168-3175页

作者： Ze-En Zhou Yi Lu Yi-Xuan Liu Shang Cao Ge Tian Zhi-Yi Hu Ling Shen Si-Ming Wu Jie Ying Wei Geng Xiao-Yu Yang State Key Laboratory of Advanced Technology for Materials Synthesis and Processing&Shenzhen Research Institute&Laoshan Laboratory Wuhan University of TechnologyWuhan 430070China National Energy Key Laboratory for New Hydrogen-Ammonia Energy Technologies Foshan Xianhu LaboratoryFoshan 528200China Nanostructure Research Centre(NRC) Wuhan University of TechnologyWuhan 430070China School of Chemical Engineering and Technology Sun Yat-sen UniversityZhuhai 519082China

Effective separation of photogenerated carriers plays a vital role in governing the efficiency of photo-electrocatalytic ***,the advancement in enhancing the intrinsic carrier separation efficiency of semiconductors has shown limited ***,we reported the use of a magnetic field to improve the photoelectrochemical water splitting of a magnetic Co_(3)O_(4)/TiO_(2)photoanode by boosting the photogenerated carrier separation *** the presence of the magnetic field,oxygen evolution reaction occurs with a high photocurrent density of 0.86 mA cm^(−2)at 1.23 V versus VRHE,and an applied bias photon-to-current efficiency of 0.342%at 0.61 ***,the photoanode maintains its oxygen evolution reaction for more than 400 h with photocurrent decays by ca.10%.Observations made in this effort show that the enhancement of photo-electrocatalytic efficiency by a magnetic field is a consequence of the effect of the Lorentz force generated by the magnetic field on photogenerated carriers and ions near the Co_(3)O_(4)/TiO_(2)photoanode,which improves the carrier separation efficiency and the bubble release *** results suggest that manipulating photoelectrode carriers by using a magnetic field is a promising strategy to design high-performance photoelectrochemical for water splitting.

关键词： photoelectrochemical water splitting Co_(3)O_(4)/TiO_(2) carrier separation efficiency stability

来源：评论

学校读者我要写书评

暂无评论

Synergistic Coupling of Sulfide Electrolyte and Integrated 3D FeS_(2)Electrode Toward Long-Cycling All-Solid-state Lithium Batteries

引用

Energy & Environmental materials 2024年第5期7卷 68-76页

作者： Wenyi Liu Yongzhi Zhao Chengjun Yi Weifei Hu Jiale Xia Yuanyuan Li Jinping Liu State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China School of Chemistry Chemical Engineering and Life ScienceWuhan University of TechnologyWuhan 430070China School of Integrated Circuits Huazhong University of Science and TechnologyWuhan 430074China

FeS_(2)cathode is promising for all-solid-state lithium batteries due to its ultra-high capacity,low cost,and environmental ***,the poor performances,induced by limited electrode-electrolyte interface,severe volume expansion,and polysulfide shuttle,hinder the application of FeS_(2)in all-solid-state lithium ***,an integrated 3D FeS_(2)electrode with full infiltration of Li6PS5Cl sulfide electrolytes is designed to address these *** a 3D integrated design not only achieves intimate and maximized interfacial contact between electrode and sulfide electrolytes,but also effectively buffers the inner volume change of FeS_(2)and completely eliminates the polysulfide shuttle through direct solid-solid conversion of Li2S/***,the vertical 3D arrays guarantee direct electron transport channels and horizontally shortened ion diffusion paths,endowing the integrated electrode with a remarkably reduced interfacial impedance and enhanced reaction *** from these synergies,the integrated all-solid-state lithium battery exhibits the largest reversible capacity(667 mAh g^(-1)),best rate performance,and highest capacity retention of 82%over 500 cycles at 0.1 C compared to both a liquid battery and non-integrated all-solid-state lithium *** cycling performance is among the best reported for FeS_(2)-based all-solid-state lithium *** work presents an innovative synergistic strategy for designing long-cycling high-energy all-solid-state lithium batteries,which can be readily applied to other battery systems,such as lithium-sulfur batteries.

关键词： 3D electrolyte infiltration all-solid-state batteries FeS_(2)nanosheets arrays integrated 3D electrodes sulfide electrolytes

来源：评论

学校读者我要写书评

暂无评论

Structure and enhanced dielectric temperature stability of BaTiO3- based ceramics by Ca ion B site-doping

引用

Journal of Materiomics 2021年第2期7卷 295-301页

作者： Xuewen Jiang Hua Hao Yang Yang Enhao Zhou Shujun Zhang Ping Wei Minghe Cao Zhonghua Yao Hanxing Liu Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory Xianhu Hydrogen ValleyFoshan528200China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing School of Materials Science and EngineeringWuhan University of TechnologyWuhan430070China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing International School of Material Science and EngineeringWuhan University of TechnologyWuhan430070China Institute for Superconducting and Electronic Materials Australian Institute of Innovative MaterialsUniversity of WollongongWollongongNSW2500Australia Nanostructure Research Centre Wuhan University of TechnologyWuhan430070China

Capacitor is an important part of many electronic devices,so the temperature stability as one key parameter of capacitor needs to be improved constantly for meeting the requirements of various application ***,combined with the X-ray diffraction(XRD),selected area electron diffraction(SAED)and Vienna Ab-initio Simulation Package(VASP)calculation,it was confirmed that Ca ion can substitute the Ti site in the BaTi1-xCaxO3-x[BTC100](0≤x≤0.05)ceramics synthesized by solid-phase method which greatly improved the low-temperature stability of dielectric ***,introducing Bi3þand Zn^(2+) into BTC4 to form(1-y)BaTi0.6Ca0.04O2.96-yBi(Zn_(0.5)Ti_(0.5))O_(3)[(1-y)BTC4-yBZT](0.1≤y≤0.2)ceramics can further improve the dielectric-temperature stability by means of diffused phase transition and core-shell *** importantly,the 0.85BTC4-0.15BZT ceramics with a pseudocubic perovskite structure possessed a temperature coefficient of capacitance at 25℃(TCC25℃)being less than±15%over a wide temperature range of 55℃-200℃and a temperate dielectric constant(ε=1060)and low dielectric loss(tanδ=1.5%),which measure up to the higher standard in the current capacitor industry such as X9R requirements.

关键词： BaTiO3 Ca substituted X9R capacitors Dielectric properties

来源：评论

学校读者我要写书评

暂无评论

高效多孔碳基催化剂的研究进展及其在锌空气电池中应用

引用

Science China materials 2023年第9期66卷 3381-3400页

作者：蔡世昌安宇冯亚刚段磊张寒露张猛吴佳宾唐浩林 School of Materials Science and Engineering Henan University of TechnologyZhengzhou 450001China Department of Chemistry Tsinghua UniversityBeijing 100084China Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong LaboratoryXianhu Hydrogen ValleyFoshan 528200China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

近年来,能源短缺问题日益突出,传统化石燃料使用过程中排放的二氧化碳大大加剧了全球变暖.锌空气电池作为一种新型能源,由于其低成本、高比能量密度、高安全性和环境友好等优点而受到广泛关注.然而,锌空气电池的发展速度缓慢,一个主要... 详细信息

近年来,能源短缺问题日益突出,传统化石燃料使用过程中排放的二氧化碳大大加剧了全球变暖.锌空气电池作为一种新型能源,由于其低成本、高比能量密度、高安全性和环境友好等优点而受到广泛关注.然而,锌空气电池的发展速度缓慢,一个主要原因是阴极空气催化剂的催化效率低和稳定性差.本文总结了用于空气阴极的多孔碳基催化剂的最新研究进展.在对锌空气电池进行简要介绍后,从孔结构和杂原子掺杂两方面介绍了碳载体的结构和组成.根据孔径大小:微孔、介孔和大孔,详细介绍了锌空气电池中多孔碳的设计和制备.此外,还根据氮、氟、硫、磷和硼等杂原子类别,分别讨论了杂原子掺杂的合成策略以及相应电池性能.最后,本文对锌空气电池未来发展过程中的挑战和机遇进行了展望.

关键词：锌空气电池碳载体能源短缺问题碳基催化剂化石燃料杂原子掺杂多孔碳新型能源

来源：评论

学校读者我要写书评

暂无评论

Wearable and interactive multicolored photochromic fiber display

引用

Light(Science & Applications) 2024年第3期13卷 454-465页

作者： Pan Li Yuwei Wang Xiaoxian He Yuyang Cui Jingyu Ouyang Ju Ouyang Zicheng He Jiayu Hu Xiaojuan Liu Hang Wei Yu Wang Xiaoling Lu Qian Ji Xinyuan Cai Li Liu Chong Hou Ning Zhou Shaowu Pan Xiangru Wang Huamin Zhou Cheng-Wei Qiu Yan-Qing Lu Guangming Tao State Key Laboratory of Material Processing and Die&Mould Technology School of Materials Science and Engineering and Wuhan National Laboratory for OptoelectronicsHuazhong University of Science and TechnologyWuhan 430074China Key Laboratory of Vascular Aging(HUST) Ministry of EducationWuhan 430030China School of Optoelectronic Science and Engineering University of Electronic Science and Technology of ChinaChengdu 611731China Department of Electrical and Computer Engineering National University of SingaporeSingapore 117583Singapore National Laboratory of Solid State Microstructures Key Laboratory of Intelligent Optical Sensing and ManipulationCollege of Engineering and Applied Sciencesand Collaborative Innovation Center of Advanced MicrostructuresNanjing UniversityNanjing 210023China School of Performing Arts Wuhan Conservatory of MusicWuhan 430060China School of Mechanical Science and Engineering Huazhong University of Science and TechnologyWuhan 430074China School of Architecture and Urban Planning Huazhong University of Science and TechnologyWuhan 430074China School of Fashion Beijing Institute of Fashion TechnologyBeijing 100029China School of Optical and Electronic Information Huazhong University of Science and TechnologyWuhan 430074China Tongji Medical College Huazhong University of Science and TechnologyWuhan 430074China State Key Laboratory for Modification of Chemical Fibers and Polymer Materials College of Materials Science and EngineeringDonghua UniversityShanghai 201620China

Endowing flexible and adaptable fiber devices with light-emitting capabilities has the potential to revolutionize the current design philosophy of intelligent,wearable interactive ***,significant challenges remain in developing fiber devices when it comes to achieving uniform and customizable light effects while utilizing lightweight ***,we introduce a mass-produced,wearable,and interactive photochromic fiber that provides uniform multicolored light *** designed independent waveguides inside the fiber to maintain total internal reflection of light as it traverses the *** impact of excessive light leakage on the overall illuminance can be reduced by utilizing the saturable absorption effect of fluorescent materials to ensure light emission uniformity along the transmission *** addition,we coupled various fluorescent composite materials inside the fiber to achieve artificially controllable spectral radiation of multiple color systems in a single *** prepared fibers on mass-produced kilometer-long using the thermal drawing *** fibers can be directly integrated into daily wearable devices or clothing in various patterns and combined with other signal input components to control and display patterns as *** work provides a new perspective and inspiration to the existing field of fiber display interaction,paving the way for future human–machine integration.

关键词： fiber interactive colored

来源：评论

学校读者我要写书评

暂无评论

Carboxymethyl chitosan-alginate enhances bone repair effects of magnesium phosphate bone cement by activating the FAK-Wnt pathway

引用

Bioactive materials 2023年第2期20卷 598-609页

作者： Ling Yu Tian Gao Wei Li Jian Yang Yinchu Liu Yanan Zhao Ping He Xuefeng Li Weichun Guo Zhengfu Fan Honglian Dai Department of Orthopedic Surgery I(Spine Surgery) Renmin Hospital of Wuhan UniversityWuhan430060China Department of Bone and Soft Tissue Tumor Key Laboratory of Carcinogenesis and Translational ResearchMinistry of EducationPeking University Cancer Hospital&InstituteBeijing100000China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Biomedical Materials and Engineering Research Center of Hubei ProvinceWuhan University of TechnologyWuhan430070China Department of Orthopedic Surgery Renmin Hospital of ShayangJingmen448200China

There is a continuing need for artificial bone substitutes for bone repair and reconstruction,Magnesium phosphate bone cement(MPC)has exceptional degradable properties and exhibits promising ***,its mechanical strength needs improved and its low osteo-inductive potential limits its therapeutic application in bone *** functionally modified MPC by using a polymeric carboxymethyl chitosan-sodium alginate(CMCS/SA)gel *** had the advantages of:improved compressive strength,ease of handling,and an optimized interface for bioactive bone *** new composites with 2%CMCS/SA showed the most favorable physicochemical properties,including mechanical strength,wash-out resistance,setting time,injectable time and heat ***,the composite promoted the attachment and proliferation of osteoblast *** was also found to induce osteogenic differentiation in vitro,as verified by expression of osteogenic *** terms of molecular mechanisms,data showed that new bone cement activated the Wnt pathway through inhibition of the phosphorylation ofβ-catenin,which is dependent on focal adhesion *** micro-computed tomography and histological analysis,we found that the MPC-CMCS/SA scaffolds,compared with MPC alone,showed increased bone regeneration in a rat calvarial defect ***,our study suggested that the novel composite had potential to help repair critical bone defects in clinical practice.

关键词： Critical bone defect Magnesium phosphate cement Carboxymethyl chitosan Sodium alginate Osteogenic differentiation

来源：评论

学校读者我要写书评

暂无评论

Semitransparent organic photovoltaics enabled by transparent p-type inorganic semiconductor and near-infrared acceptor

引用

Journal of Energy Chemistry 2024年第9期96卷 351-358页

作者： Xue Yan Jiayu Wang Wei He Top Archie Dela Peña Can Zhu Hailin Yu Yingyue Hu Cenqi Yan Shengqiang Ren Xingyu Chen Zhe Wang Jiaying Wu Mingjie Li Jianlong Xia Lei Meng Shirong Lu Dewei Zhao Mikhail Artemyev Yongfang Li Pei Cheng College of Polymer Science and Engineering State Key Laboratory of Polymer Materials EngineeringSichuan UniversityChengdu 610065SichuanChina Department of Applied Physics The Hong Kong Polytechnic UniversityKowloonHong Kong 999077China Beijing National Laboratory for Molecular Sciences CAS Key Laboratory of Organic SolidsInstitute of ChemistryChinese Academy of SciencesBeijing 100190China College of Materials Science and Engineering&Engineering Research Center of Alternative Energy Materials&Devices Ministry of EducationSichuan UniversityChengdu 610065SichuanChina Department of Material Science and Technology Taizhou UniversityTaizhou 318000ZhejiangChina Advanced Materials Thrust Function HubThe Hong Kong University of Science and Technology(Guangzhou)Guangzhou 511400GuangdongChina State Key Laboratory of Advanced Technology for Materials Science and Processing Center of Smart Materials and DevicesWuhan University of TechnologyWuhan 430070HubeiChina Department of Civil1nd Environmental Engineering The Hong Kong University of Science and TechnologyHong Kong 999077China Research Institute for Physical Chemical Problems Belarusian State UniversityMinsk 220006Belarus

Semitransparent organic photovoltaics(STOPVs)have gained wide attention owing to their promising applications in building-integrated photovoltaics,agrivoltaics,and floating *** semiconductors with high charge carrier mobility usually have planar and conjugated structures,thereby showing strong absorption in visible *** this work,a new concept of incorporating transparent inorganic semiconductors is proposed for high-performance ***(I)thiocyanate(CuSCN)is a visible-transparent inorganic semiconductor with an ionization potential of 5.45 eV and high hole *** transparency of CuSCN benefits high average visible transmittance(AVT)of *** energy levels of CuSCN as donor match those of near-infrared small molecule acceptor BTP-eC9,and the formed heterojunction exhibits an ability of exciton *** mobility of CuSCN contributes to a more favorable charge transport channel and suppresses charge *** control STOPVs based on PM6/BTP-eC9 exhibit an AVT of 19.0%with a power conversion efficiency(PCE)of 12.7%.Partial replacement of PM6 with CuSCN leads to a 63%increase in transmittance,resulting in a higher AVT of 30.9%and a comparable PCE of 10.8%.

关键词： Copper(I)thiocyanate Inorganic semiconductor Semitransparent Organic photovoltaics Charge dissociation

来源：评论

学校读者我要写书评

暂无评论

Surface pseudocapacitance of mesoporous Mo_(3)N_(2) nanowire anode toward reversible high-rate sodium-ion storage

引用

Journal of Energy Chemistry 2021年第4期30卷 295-303页

作者： Yalong Jiang Jun Dong Shuangshuang Tan Qiulong Wei Fangyu Xiong Wei Yang Yuanhao Shen Qingxun Zhang Zi'ang Liu Qinyou An Liqiang Mai State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070HubeiChina Department of Materials Science and Engineering Fujian Key Laboratory of Materials GenomeCollege of MaterialsXiamen UniversityXiamen 361005FujianChina Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory Xianhu Hydrogen ValleyFoshan 528200GuangdongChina

Sodium-ion storage devices are highly desirable for large-scale energy storage applications owing to the wide availability of sodium resources and low *** metal nitrides(TMNs)are promising anode materials for sodium-ion storage,while their detailed reaction mechanism remains ***,we synthesize the mesoporous Mo3N2 nanowires(Meso-Mo_(3)N_(2)-NWs).The sodium-ion storage mechanism of Mo3N2 is systematically investigated through in-situ XRD,ex-situ experimental characterizations and detailed kinetics ***,the Mo_(3)N_(2) undergoes a surface pseudocapacitive redox charge storage *** from the rapid surface redox reaction,the Meso-Mo_(3)N_(2)-NWs anode delivers high specific capacity(282 m Ah g^(-1) at 0.1 A g^(-1)),excellent rate capability(87 m Ah g^(-1) at 16 A g^(-1))and long cycling stability(a capacity retention of 78.6%after 800 cycles at 1 A g^(-1)).The present work highlights that the surface pseudocapacitive sodium-ion storage mechanism enables to overcome the sluggish sodium-ion diffusion process,which opens a new direction to design and synthesize high-rate sodiumion storage materials.

关键词： Surface pseudocapacitance Sodium-ion storage Nitrogen vacancy Molybdenum nitride High-rate

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：