检索结果-内蒙古大学图书馆

Dual-salt poly(tetrahydrofuran) electrolyte enables quasi-solid-state lithium metal batteries to operate at -30 ℃

Journal of Energy Chemistry 2024年第9期96卷 456-463页

作者： Zhiyong Li Zhuo Li Rui Yu Xin Guo School of Materials Science and Engineering State Key Laboratory of Material Processing and Die&Mould TechnologyHuazhong University of Science and TechnologyWuhan 430074HubeiChina The State Key Laboratory of Refractories and Metallurgy and Institute of Advanced Materials and Nanotechnology Wuhan University of Science and TechnologyWuhan 430081HubeiChina

The stable operation of solid-state lithium metal batteries at low temperatures is plagued by severe restrictions from inferior electrolyte-electrode interface compatibility and increased energy barrier for Li^(+)***,we prepare a dual-salt poly(tetrahydrofuran)-based electrolyte consisting of lithium hexafluorophosphate and lithium difluoro(oxalato)borate(LiDFOB).The Li-salt anions(DFOB−)not only accelerate the ring-opening polymerization of tetrahydrofuran,but also promote the formation of highly ion-conductive and sustainable interphases on Li metal anodes without sacrificing the Li^(+)conductivity of electrolytes,which is favorable for Li^(+)transport kinetics at low *** of this polymer electrolyte in Li||LiFePO_(4)cells show 82.3%capacity retention over 1000 cycles at 30℃and endow stable discharge capacity at−30℃.Remarkably,the Li||LiFePO4 cells retain 52%of their room-temperature capacity at−20℃and 0.1 *** rational design of dual-salt polymer-based electrolytes may provide a new perspective for the stable operation of quasi-solid-state batteries at low temperatures.

关键词： Poly(tetrahydrofuran) Dual-salt electrolyte Solidel ectrolyte interphase Low-temperature operation Quasi-solid-state battery

来源：评论

学校读者我要写书评

暂无评论

Effects of Diamond on the Mechanical Properties and Thermal Conductivity of Si_(3)N_(4)Composites Fabricated Using Spark Plasma Sintering

引用

Journal of Wuhan University of technology(materials Science) 2024年第5期39卷 1319-1324页

作者： GAO Ying LIU Di WANG Aiyang ZHANG Song HE Qianglong REN Shifeng FANG Jie WANG Zihan WANG Weimin State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Jingdezhen Huaxun Special Ceramics Co.ltd. Jingdezhen 333000China Aerospace Science&Industry Defense Technology Research and Test Center Beijing 100854China

Micrometer-sized diamonds were incorporated into silicon nitride(Si_(3)N_(4))matrix to manufacture high-performance Si_(3)N_(4)-based composites using spark plasma sintering at 1500℃under 50 *** effects of the diamond content on the phase composition,microstructure,mechanical properties and thermal conductivity of the composites were *** results showed that the addition of diamond could effectively improve the hardness of the *** thermal conductivity of Si_(3)N_(4)increased to 52.97 W/m·k at the maximum with the addition of 15 wt%diamond,which was 27.5%higher than that of the monolithic Si_(3)N_(4).At this point,the fracture toughness was 7.54 MPa·m^(1/2).Due to the addition of diamond,the composite material generated a new substance,MgSiN2,which effectively combined Si_(3)N_(4)with ***2 might improve the hardness and thermal conductivity of the materials.

关键词： spark plasma sintering Si_(3)N_(4) diamond thermal conductivity mechanical properties

来源：评论

学校读者我要写书评

暂无评论

Designing carboxymethyl cellulose based hydrogel electrolyte membranes enhanced by inorganic nanoparticle toward stable zinc anode

引用

Green Energy & Environment 2025年第3期10卷 537-550页

作者： Xiangye Li Yuan Li Yu Jiang Dahui Wang Fen Ran State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals Department of Polymeric Materials EngineeringSchool of Material Science and EngineeringLanzhou University of TechnologyLanzhou730050China

Aqueous zinc metal batteries have garnered substantial attention ascribing to affordability,intrinsic safety,and environmental benignity Nevertheless,zinc metal batteries yet are challenged with potential service life issues resulted from dendrites and side *** this paper,a strategy of nanoparticles doped hydrogel is proposed for constructing carboxymethyl cellulose/graphite oxide hybrid hydrogel electrolyte membranes with exceptional ionic conductivity,anti-swelling property,and simultaneously addressing the dendrites and parasitic *** pivotal functions of the carboxymethyl cellulose/graphite oxide hydrogel electrolyte in mitigating hydrogen evolution and fostering accelerated Zn deposition have been elucidated based on principles of thermodynamic and reaction *** carboxymethyl cellulose/graphite oxide hydrogel electrolyte endows exceptional cycling longevity (800 h at 1 mA cm^(-2)/1 mAh cm^(-2)) for Znjj Zn battery,as well as high Coulombic efficiency for Znjj Cu battery (averagely 99.14%within 439 cycles at 1 mA cm^(-2)/1 mAh cm^(-2)).The assembled Znjj NH_(4)V_(4)O_(10)battery delivers a high reversible specific capacity of 328.5 mAh g^(-1)at 0.1 A g^(-1).Moreover,the device of Znjj NH_(4)V_(4)O_(10)pouch battery remains operational under severe conditions like bending and *** work provides valuable reference in developing inorganic nanoparticle hybrid hydrogel electrolyte for realizing high-performance zinc metal batteries.

关键词： Carboxymethyl cellulose Graphite oxide Hydrogel electrolyte Anti-swelling

来源：评论

学校读者我要写书评

暂无评论

synthesis Approach and Adsorption Properties of SiOC Nanocomposite by Chitin Templating

引用

Journal of Wuhan University of technology(materials Science) 2022年第6期37卷 1041-1047页

作者： HUANG Yaoxuan PING Hang WANG Kun FU Zhengyi State Key Laboratory of Silicate Materials for Architectures Wuhan University of TechnologyWuhan 430070China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

Using chitin as the templating material,we obtained layered nanocomposites like shrimp or crab shells via a sol-gel self-assembly *** images show a layered structure and XRD patterns present a typical peak of chitin,which indicates the templating role of chitin in the as-received hybrid ***,the layer spacing of chitin/silica hybrid materials is reduced with increasing content of *** the heat treatment for carbonization,layered SiOC nanocomposites with mesoporous structures were obtained and showed good dye adsorption *** present study demonstrates a reliable and self-assembly synthesis technique for the development of advanced high-performance nanocomposites with biomimetic nanostructures.

关键词： chitin sol-gel method self-assembly biomimetic structure SiOC nanocomposite

来源：评论

学校读者我要写书评

暂无评论

Tuning Active Metal Atomic Spacing by Filling of Light Atoms and Resulting Reversed Hydrogen Adsorption-Distance Relationship for Efficient Catalysis

引用

Nano-Micro Letters 2023年第10期15卷 151-162页

作者： Ding Chen Ruihu Lu Ruohan Yu Hongyu Zhao Dulan Wu Youtao Yao Kesong Yu Jiawei Zhu Pengxia Ji Zonghua Pu Zongkui Kou Jun Yu Jinsong Wu Shichun Mu State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070People’s Republic of China NRC(Nanostructure Research Centre) Wuhan University of TechnologyWuhan 430070People’s Republic of China

Precisely tuning the spacing of the active centers on the atomic scale is of great significance to improve the catalytic activity and deepen the understanding of the catalytic mechanism,but still remains a ***,we develop a strategy to dilute catalytically active metal interatomic spacing(d_(M-M))with light atoms and discover the unusual adsorption *** example,by elevating the content of boron as interstitial atoms,the atomic spacing of osmium(d_(Os-Os))gradually increases from 2.73 to 2.96?.More importantly,we find that,with the increase in dOs-Os,the hydrogen adsorption-distance relationship is reversed via downshifting d-band states,which breaks the traditional cognition,thereby optimizing the H adsorption and H_2O dissociation on the electrode surface during the catalytic process;this finally leads to a nearly linear increase in hydrogen evolution reaction ***,the maximum dOs-Os of 2.96?presents the optimal HER activity(8 mV@10 mA cm^(-2))in alkaline media as well as suppressed O adsorption and thus promoted *** is believed that this novel atomic-level distance modulation strategy of catalytic sites and the reversed hydrogen adsorption-distance relationship can shew new insights for optimal design of highly efficient catalysts.

关键词： Electrocatalysis DFT calculation Interstitial filling Hydrogen evolution Structure–activity relationships

来源：评论

学校读者我要写书评

暂无评论

Construction of dendritic Pt–Pd bimetallic nanotubular heterostructure for advanced oxygen reduction

引用

Interdisciplinary materials 2024年第6期3卷 907-918页

作者： Mingwei Wang Zhiyi Hu Jieheng Lv Zhiwen Yin Zhewei Xu Jingfeng Liu Shihao Feng Xiaoqian Wang Jiazhen He Sicheng Luo Dafu Zhao Hang Li Xuemin Luo Qi Liu Damin Liu Baolian Su Dongyuan Zhao Yong Liu International School of Materials Science and Engineering(ISMSE) State Key Laboratory of Advanced Technology for Materials Synthesis and ProcessingWuhan University of TechnologyWuhanChina Department of Chemistry Laboratory of Inorganic Materials ChemistryUniversity of NamurNamurBelgium Department of Chemistry Laboratory of Advanced MaterialsShanghai Key Lab of Molecular Catalysis and Innovative MaterialsState Key Laboratory of Molecular Engineering of PolymersFudan UniversityShanghaiChina

Compositions and morphologies of Pt-based electrocatalysts have great impact on the electrocatalytic activity and stability of oxygen reduction reaction(ORR).Herein,we report a novel design of one-dimensional(1D)Pt-Pd dendritic nanotubular heterostructures(DTHs)by controlling the degree of Pt 2+-Pt reduction reaction and Pd-Pt galvanic replacement reaction with uniform Pd nanowires as sacrificial *** obtained Pt-Pd bimetallic DTHs catalyst exhibited uniform and dense Pt dendritic nanobranches on the surface of 1D hollow Pt-Pd alloy nanotubes,possessing superior catalytic activity for ORR compared to state-of-the-art commercial Pt/C ***,the Pt_(4)Pd DTHs catalyst showed efficient mass activity(MA,1.05 A mg_(Pt)^(−1))and specific activity(SA,1.25 mA cm_(Pt)^(−2))at 0.9 V(***),and the catalyst exhibited high stability with 90.4%MA retention after 20000 potential *** Pt-Pd bimetallic DTHs configuration combines the advantages of 1D hollow nanostructures and dense Pt dendritic nanobranches,which results in rich electrochemical active surface sites,fast charge transport,and multiple dendritic anchoring points contact on carbon support,thus boosting its catalytic activity and stability towards electrocatalysis.

关键词： dendritic hollow heterostructures electrocatalysis one-dimensional nanowires oxygen reduction proton exchange membrane fuel cells

来源：评论

学校读者我要写书评

暂无评论

ZnIn_(2)S_(4)/MOF S-scheme photocatalyst for H_(2)production and its femtosecond transient absorption mechanism

引用

Journal of materials Science & technology 2024年第30期197卷 183-193页

作者： Jiajie Cai Bowen Liu Shumin Zhang Linxi Wang Zhen Wu Jianjun Zhang Bei Cheng State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Hunan Key Laboratory of Applied Environmental Photocatalysis Changsha UniversityChangsha 410022China Laboratory of Solar Fuel Faculty of Materials Science and ChemistryChina University of Geosciences68 Jincheng StreetWuhan 430078China Department of Chemical Engineering Ordos Institute of TechnologyOrdos 017000China

Photocatalytic water splitting is a popular pathway for H_(2)evolution,but the slow water oxidation greatly hampers the overall *** harness photogenerated holes in an efficient and lucrative way,the wa-ter oxidation reaction is replaced by selective oxidation of organic compounds to achieve simultaneous production of H_(2)and value-added ***,an alternative tactic is reported where an organic compound(benzylamine,BA)not only serves as the precursor for N-benzylidene-benzylamine(NBBA)production but also provides hydrogen sources for H_(2)evolution,achieving the goal under anhydrous *** process is realized using an S-scheme photocatalyst composed of ZnIn_(2)S_(4)and the UiO-66-NH_(2)(U6N)metal-organic framework(MOF).The S-scheme carrier transfer mechanism was validated by in-situ irradiated X-ray photoelectron spectroscopy(ISI-XPS)and femtosecond transient absorption(fs-TA)*** increased carrier efficiency and reinforced redox power endowed by the S-scheme heterojunction,the composite performed better than ZnIn2 S4 and *** performance was further ameliorated by Pt-cocatalyst modification,achieving an H_(2)production rate of 5275μmol h^(-1)g^(-1)as well as BA conversion of 94.3%with 99.3%NBBA *** studies reveal that BA is ini-tially oxidized to carbon-centered radicals and further to imines along with the release of *** imine reacts with another BA molecule to form NBBA,while the protons are reduced to H_(2).This work provides new insights into concurrent photocatalytic H_(2)production and selective organic oxidation from organic amines using S-scheme photocatalysts.

关键词： Photocatalysis S-scheme heterojunction Hydrogen production Selective oxidation Benzylamine Femtosecond transient absorption

来源：评论

学校读者我要写书评

暂无评论

Exploring the Core-shell Structure of BaTiO3-based Dielectric Ceramics Using Machine Learning Models and Interpretability Analysis

引用

Journal of Wuhan University of technology(materials Science) 2024年第3期39卷 561-569页

作者：孙家乐 XIONG Peifeng 郝华 LIU Hanxing State Key Laboratory of Advanced Technology for Materials Synthesis and Processing School of Material Science and EngineeringInternational School of Material Science and EngineeringWuhan University of TechnologyWuhan 430070China Sanya Science and Education Innovation Park Wuhan University of TechnologySanya 572000China Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory Xianhu Hydrogen ValleyFoshan 528200China

A machine learning(ML)-based random forest(RF)classification model algorithm was employed to investigate the main factors affecting the formation of the core-shell structure of BaTiO_(3)-based ceramics and their interpretability was analyzed by using Shapley additive explanations(SHAP).An F1-score changed from 0.8795 to 0.9310,accuracy from 0.8450 to 0.9070,precision from 0.8714 to 0.9000,recall from 0.8929 to 0.9643,and ROC/AUC value of 0.97±0.03 was achieved by the RF classification with the optimal set of features containing only 5 features,demonstrating the high accuracy of our model and its high *** the interpretability analysis of the model,it was found that the electronegativity,melting point,and sintering temperature of the dopant contribute highly to the formation of the core-shell structure,and based on these characteristics,specific ranges were delineated and twelve elements were finally obtained that met all the requirements,namely Si,Sc,Mn,Fe,Co,Ni,Pd,Er,Tm,Lu,Pa,and *** the process of exploring the structure of the core-shell,the doping elements can be effectively localized to be selected by choosing the range of features.

关键词： machine learning BaTiO_(3) core-shell structure random forest classifier

来源：评论

学校读者我要写书评

暂无评论

Vanadium nitride quantum dots@carbon skeleton anode material synthesized via in situ oxidation initiation strategy

引用

Tungsten 2024年第3期6卷 561-573页

作者： Yi-Han Fu Yuan-You Peng Lei Zhao Tian-Qi He Mei-Mei Yuan Hao Dang Rui Liu Fen Ran State Key Laboratory of Advanced Processing and Recycling of Non-Ferrous Metals School of Materials Science and EngineeringLanzhou University of TechnologyLanzhou 730050China

Vanadium nitride(VN)has received significant attention as a potential negative electrode material due to its remarkable theoretical and physical ***,the electrochemical performance needs to be improved due to its low specific surface area and the issue of being easily dissolved in *** have shown that the composite structure of carbon-coated nano sc ale VN particles could significantly increase the specific surface area of VN,and more importantly,and the carbon matrix can effectively restrain the dissolution of VN particles in the electrolyte,thereby improving its chemical and electrochemical performance,including specific capacity and cycling ***,VN quantum dots are synthesized and protected by uniformly coating the carbon skeleton on its surface via an in situ strategy of oxidation initiation,which initiates dopamine polymerization,forming a crystalline complex of polydopamine and *** heat treatment,the product is a composite material with VN quantum dots embedded in the amorphous carbon *** resulting smallsized and crosslinked carbon particles formed a graded pore structure,more reasonable channels provided for electrolyte ions transport *** the composite material was used as the negative electrode material for supercapacitors,it exhibits the specific capacity of 391.9 F·g^(-1)at a current density of 0.5 A·g^(-1)and excellent capacity retention rate of 83.6%after *** synthesis method of this quantum dot could be applied to other metal compounds and has potential applications in catalysis,environmental protection,and other fields.

关键词： In situ initiation Vanadium nitride Quantum dots Anode Supercapacitors

来源：评论

学校读者我要写书评

暂无评论

In Situ Reaction Strengthening and Toughening of B_(4)C/TiSi_(2)Ceramics

引用

Journal of Wuhan University of technology(materials Science) 2023年第1期38卷 12-19页

作者：夏涛涂晓诗张帆 ZHANG Jinyong REN Lin Hubei Longzhong Laboratory Wuhan University of TechnologyXiangyang Demonstration ZoneXiangyang 441000China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China School of Science Wuhan University of TechnologyWuhan 430070China

B_(4)C-SiC-TiB_(2)ceramics were prepared by in situ reactive hot-pressing sintering with TiSi_(2)as an *** reaction pathways of TiSi_(2)and B_(4)C were *** sintering was found to be a multistep *** reaction started at approximately 1000℃,and TiB_(2)was formed *** of Si and C started to react at 1300℃,and the unreacted Si melted at 1400℃to form a liquid ***_(2)predominantly affected the intermediate sintering process of B_(4)C and increased the sintering *** to the unique reaction process of TiSi_(2)and B_(4)C,a large number of aggregates composed of SiC and TiB_(2)were *** results showed that composite ceramics with the optimal flexural strength of 807 MPa,fracture toughness of 3.2 MPa·m1/2,and hardness of 32 GPa,were obtained when the TiSi_(2)content was 10 wt%.

关键词： in situ reaction hot pressing sintering TiSi_(2) B_(4)C composite ceramics reaction mechanism

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：