检索结果-内蒙古大学图书馆

Design and Dynamic Experiment of Al-Cu Graded materials Impactor with Strain Rate of 10^(4)–10^(5)/s

稀有金属材料与工程 2025年第3期54卷 581-586页

作者： Hu Jianian Zhou Zizheng Li Yidi Chen Xiang Yang Gang Liu Jintao Zhang Jian State Key Laboratory of Precision Blasting Jianghan UniversityWuhan 430056China Hubei Key Laboratory of Blasting Engineering Jianghan UniversityWuhan 430056China Luoyang Ship Material Research Institute Luoyang 471023China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

Based on simplified calculations of one-dimensional wave systems,loading pressure platform curves of Al-Cu gradient materials(GMs)impactor were *** Al-Cu GMs were prepared using tape-pressing sintering,and their acoustic properties were characterized to match the design *** parallelism of the Al-Cu GM was confirmed using a three-dimensional surface profilometry machine.A one-stage light-gas gun was used to launch the Al-Cu GM,impacting an Al-LiF target at a velocity of 400 m/*** results of the experimental strain rate demonstrate that the Al-Cu GMs can realize the precise control of the strain rate within the range of 10^(4)‒10^(5)/s in the high-speed impact experiments.

关键词： high strain rate Al-Cu graded materials impactor acoustic impedance gas gun experiment

来源：评论

学校读者我要写书评

暂无评论

Bioactive calcium and mangnesium phosphate bone adhesive for enhanced vascularization and bone regeneration

引用

Journal of materials Science & technology 2023年第33期164卷 246-257页

作者： Jiawei Liu Honglei Kang Wenying Wei Rong Tu Takashi Goto Feng Li Honglian Dai State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Biomedical Materials and Engineering Research Center of Hubei ProvinceWuhan University of TechnologyWuhan 430070China Department of Orthopedics Tongji HospitalTongji Medical CollegeHuazhong University of Science and TechnologyWuhan 430030China Chaozhou Branch of Chemistry and Chemical Engineering Guangdong Laboratory Chaozhou 521000China New Industry Creation Hatchery Center Tohoku UniversitySendai 980-8579Japan

Bone adhesive is a promising material for the treatment of bone fractures,which is helpful for the fast and effective reduction and fixation of broken ***,the existing adhesives bond weakly to bone tissues,and are non-absorbable,or hard to cure under wet ***,inspired by the cement-based adhesive used in the industry field,we report a bioactive calcium and magnesium phosphate bone adhesive(MPBA)with the properties of facile preparation,robust adhesion,and *** is equipped with similar strength to cancellous bones and shows reliable bonding performance for various interfaces,such as Ti6Al4V,Al2O3,and poly(ether-ether-ketone).MPBA achieves excellent bonding ability for the above interfaces with the bonding strengths of 2.28±0.47,2.32±0.15,and 1.44±0.38 MPa,***,it also shows reliable fixation ability for bovine bone *** bonding behavior to materials and bones suggests that MPBA could be used for both fracture treatment and implant ***,MPBA possesses good biological activity,which could promote the vascularization process and osteogenic ***,in vivo experiments confirmed MPBA can effectively restore bone strength and promote bone regeneration.

关键词： Fracture Calcium magnesium phosphate cement Bone adhesives

来源：评论

学校读者我要写书评

暂无评论

Regulating crystallization and retarding oxidation in Sn-Pb perovskite via 1D cation engineering for high performance all-perovskite tandem solar cells

引用

Journal of Energy Chemistry 2025年第1期100卷 646-652页

作者： Ranran Liu Xin Zheng Zaiwei Wang Miaomiao Zeng Chunxiang Lan Shaomin Yang Shangzhi Li Awen Wang Min Li Jing Guo Xuefei Weng Yaoguang Rong Xiong Li Michael Grätzel Center for Mesoscopic Solar Cells Wuhan National Laboratory for OptoelectronicsHuazhong University of Science and TechnologyWuhan 430074HubeiChina Institute of Technology for Carbon Neutrality Shenzhen Institute of Advanced TechnologyChinese Academy of SciencesShenzhen 518055GuangdongChina School of Chemistry Chemical Engineering and Life SciencesState Key Laboratory of Advanced Technology for Materials Synthesis and ProcessingWuhan University of Technology430070HubeiChina Suzhou Institute of Nano-Tech and Nano-Bionics(SINANO) Chinese Academy of SciencesSuzhou 215123JiangsuChina School of Physics and Optoelectronic Engineering Hainan UniversityHaikou 570228HainanChina

All-perovskite tandem solar cells have the potential to surpass the theoretical efficiency limit of single junction solar cells by reducing thermalization ***,the challenges encompass the oxidation of Sn^(2+)to Sn^(4+)and uncontrolled crystallization kinetics in Sn-Pb perovskites,leading to nonradiative recombination and compositional heterogeneity to decrease photovoltaic efficiency and operational ***,we introduced an ionic liquid additive,1-ethyl-3-methylimidazolium iodide (EMIMI) into Sn-Pb perovskite precursor to form low-dimensional Sn-rich/pure-Sn perovskites at grain boundaries,which mitigates oxidation of Sn^(2+)to Sn^(4+)and regulates the film-forming dynamics of Sn/Pb-based perovskite *** optimized single-junction Sn-Pb perovskite devices incorporating EMIMI achieved a high efficiency of 22.87%.Furthermore,combined with wide-bandgap perovskite sub-cells in tandem device,we demonstrate 2-terminal all-perovskite tandem solar cells with a power conversion efficiency of 28.34%,achieving improved operational stability.

关键词： All-perovskite tandem solar cells Sn-Pb perovskite 1D Regulated crystallization Antioxidation

来源：评论

学校读者我要写书评

暂无评论

A Luminescent Metal-Organic Framework with LON Topology for Highly Effective Fluorescence Sensing of Fe^(3+) and TNP

引用

Chemical Research in Chinese Universities 2023年第2期39卷 305-309页

作者： GU Yu LIN Rui LUO Xiaolong LIU Yunling Advanced Institute of Materials Science School of Chemistry and Life ScienceChangchun University of TechnologyChangchun130012P.R.China State Key Laboratory of Inorganic Synthesis&Preparative Chemistry Jilin UniversityChangchun130012P.R.China

A luminescent Ag-based metal-organic framework(compound 1)has been synthesized and its structure has been *** 1 was fabricated using the Ag+and bbimb2−ligands and manifestes a rare LON *** 1 is selective not only in detecting traces of Fe^(3+)and 2,4,6-trinitrophenol(TNP)via luminescence quenching,but also demonstrates high selectivity in the presence of other *** 1’s K sv values towards Fe^(3+)can reach as high as 9.3×l0^(3) L/mol,which is higher than those of several other MOF *** is also a recyclable luminous sensor with the potential to be utilized for detecting ***,based on its characteristics,compound 1 can be regarded as a prospective luminescence sensor for detecting Fe^(3+)and TNP.

关键词： Metal-organic framework Fluorescence quenching Fe^(3+) 2,4,6-Trinitrophenol(TNP)

来源：评论

学校读者我要写书评

暂无评论

Layer-by-layer fabrication of montmorillonite coating immobilizing Cu_(2)O nanoparticles for continuously catalyzing glycerol to dihydroxyacetone

引用

Chinese Journal of Chemical Engineering 2024年第4期68卷 263-275页

作者： Kejin Li Jiahui Liu Dajian Li Xiaolan Chen Chunhui Zhou Research Group for Advanced Materials&Sustainable Catalysis(AMSC) State Key Laboratory Breeding Base of Green Chemistry-Synthesis TechnologyCollege of Chemical EngineeringZhejiang University of TechnologyHangzhou 310032China Qing Yang Institute for Industrial Minerals Qingyang 242804China Engineering Research Center of Non-metallic Minerals of Zhejiang Province Zhejiang Institute of Geology and Mineral ResourcesHangzhou 310007China

Microreactors are increasingly used for green and safe chemical processes owing to their benefits of superior mass and heat transfer,increased yield,safety,and simplicity of ***,immobilizing catalysts in microreactors remains *** this investigation,a technique for creating Cu_(2)O/montmorillonite catalyst coating,using electrostatic attraction for layer-by-layer self-assembly,was *** montmorillonite film's morphology and thickness could be efficiently regulated by adjusting the degree of exfoliation and surface charge of montmorillonite,alongside layer-by-layer coating *** Cu_(2)O nanoparticles were immobilized using the flow deposition *** resulting Cu_(2)O@montmorillonite-film-coated capillary microreactor successfully transformed glycerol into *** conversion of glycerol and product selectivity could be controlled by adjusting the molar ratio of reactants,temperature,residence time,and Cu_(2)O *** maximum glycerol conversion observed was 47.6%,with a 27%selectivity toward *** study presents a technique for immobilizing montmorillonite-based catalyst coatings in capillary tubing,which can serve as a foundation for the future application of microreactors in glycerol conversion.

关键词： Microreactor Coating Montmorillonite Glycerol Cu_(2)O

来源：评论

学校读者我要写书评

暂无评论

A solvent-free process enabling ZnO/porous carbon with enhanced microwave absorption

引用

Journal of materials Science & technology 2023年第18期149卷 255-264页

作者： Qi Chen Xing Liu Tingting Wang Xiaogang Su Meng Liu Somboon Chaemchuen Francis Verpoort State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China School of Materials Science and Engineering Wuhan University of TechnologyWuhan 430070China School of Mathematical&Physical Sciences Wuhan Textile UniversityWuhan 430200China National Research Tomsk Polytechnic University Lenin Avenue 30634050 TomskRussian Federation School of Materials Science and Engineering North University of ChinaTaiyuan 030051China

Exploring a simple,rapid,solvent-free synthetic method for mass production of cheap,broadband mi-crowave absorbers remains the main ***,a mild solvent-free procedure is reported to syn-thesize zinc oxide nanoparticles(ZnO NPs)embedded in porous carbon derived from mixing sucrose and zinc nitrate *** characteristic morphology and the ZnO NPs distribution in these compos-ites were tuned using the different raw materials *** mesoporous structure of porous car-bon benefits the compositional advantages between carbon foam and ZnO *** optimal synthesized ZnO/C-2 carbon material demonstrates the strongest absorption of-41.7 dB with a frequency of 14.5 GHz at a thin thickness of 2 mm,and its widest effective absorption is close to 6 GHz(12.2-17.8 GHz).This work produces a feasible route for the sensible design of other effective microwave absorbers for large-scale production.

关键词： Solvent-free method Porous carbon Dielectric materials Interfacial polarization Microwave broadband absorption

来源：评论

学校读者我要写书评

暂无评论

Density Functional Theory for Electrocatalysis

引用

Energy & Environmental materials 2022年第1期5卷 157-185页

作者： Xiaobin Liao Ruihu Lu Lixue Xia Qian Liu Huan Wang Kristin Zhao Zhaoyang Wang Yan Zhao State Key Laboratory of Silicate Materials for Architectures International School of Materials Science and EngineeringWuhan University of TechnologyWuhan 430070China Zhejiang University Hangzhou 310058China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Center of Smart Materials and DevicesSchool of Materials Science and EngineeringWuhan University of TechnologyWuhan 430070China Lynbrook High School San Jose CA 95129USA The Institute of Technological Sciences Wuhan UniversityWuhan 430072China

It is a considerably promising strategy to produce fuels and high-value chemicals through an electrochemical conversion process in the green and sustainable energy *** for electrocatalytic reactions,including hydrogen evolution reaction(HER),oxygen evolution reaction(OER),oxygen reduction reaction(ORR),nitrogen reduction reaction(NRR),carbon dioxide reduction reaction(CO_(2)RR),play a significant role in the advanced energy conversion technologies,such as water splitting devices,fuel cells,and rechargeable metal-air *** low-cost and highly efficient electrocatalysts is closely related to establishing the composition-structure-activity relationships and fundamental understanding of catalytic *** functional theory(DFT)is emerging as an important computational tool that can provide insights into the relationship between the electrochemical performances and physical/chemical properties of *** article presents a review on the progress of the DFT,and the computational simulations,within the framework of DFT,for the electrocatalytic processes,as well as the computational designs and virtual screenings of new *** useful descriptors and analysis tools for evaluating the electrocatalytic performances are highlighted,including formation energies,d-band model,scaling relation,egorbital occupation,and free energies of ***,the remaining questions and perspectives for the development of DFT for electrocatalysis are also proposed.

关键词： analysis tools density functional theory descriptors electrocatalysis

来源：评论

学校读者我要写书评

暂无评论

Preparation of Bi_(2)O_(3)/BiOI Step-scheme Heterojunction Photocatalysts and Their Degradation Mechanism of Methylene Blue

引用

Journal of Wuhan University of technology(materials Science) 2022年第5期37卷 801-806页

作者： JIANG Xuechao TAN Haiyan SHI Xinyu CHENG Xinhua HU Weibing HU Xinhui Key Laboratory of Green Manufacturing of Super-light Elastomer Materials of State Ethnic Affairs Commission School of Chemistry and Environmental EngineeringHubei Minzu UniversityEnshi445000China Guangxi Key Laboratory of Chemistry and Engineering of Forest Products Guangxi University for NationalitiesNanning530006China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan430070China

Bi_(2)O_(3)/BiOI step-scheme(S-scheme) heterojunction photocatalyst was synthesized by green calcination method, its degradation ability of methylene blue was investigated, and the photocatalytic performance of the Bi_(2)O_(3)/BiOI heterojunction, Bi_(2)O_(3) and BiOI was compared. The structure and morphology of the samples were characterized by X-ray diffraction(XRD), field emission scanning electron microscopy(FESEM), and UV-vis diffuse reflection spectrum (UV-vis DRS). The degradation rate of methylene blue was analysised by spectrophotometry, and the calculation result showed that the degradation rate of methylene blue was 97.8% in 150 minutes. The first order kinetic rate constant of 10%Bi_(2)O_(3)/BiOI is 0.021 8 min^(-1), which are2.37 and 2.68 times of BiOI(0.009 18 min^(-1)) and Bi_(2)O_(3) (0.008 03 min^(-1)) respectively. The calculation result shows that the work function of Bi_(2)O_(3) and BiOI are 3.0 e V and 6.0 e V, respectively, by density functional theory(DFT). When this S-scheme heterojunction is used as a photocatalyst, the weaker electrons in the conduction band of BiOI will be combined with the weaker holes in the Bi_(2)O_(3) valence band under combined effect with built-in electric field and band bending, which will retain stronger photoelectrons and holes between Bi_(2)O_(3) and BiOI. This may be the internal reason for the efficient degradation of tetracycline by Bi_(2)O_(3)/BiOI S-scheme heterostructures.

关键词： step-scheme heterojunction methylene blue antibiotic wastewater treatment photocatalytic degradation charge separation

来源：评论

学校读者我要写书评

暂无评论

Solar fuel generation over nature-inspired recyclable TiO_(2)/g-C_(3)N_(4)S-scheme hierarchical thin-film photocatalyst

引用

Journal of materials Science & technology 2022年第17期112卷 1-10页

作者： Libo Wang Xingang Fei Liuyang Zhang Jiaguo Yu Bei Cheng Yuhua Ma State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Laboratory of Solar Fuel Faculty of Materials Science and ChemistryChina University of Geosciences388 Lumo RoadWuhan 430074China College of Chemistry and Chemical Engineering Xinjiang Normal UniversityUrumqi 830054China

Preparation of efficient photocatalysts with ease of recovery in solar fuel generation is highly desired to achieve carbon neutralization in carbon dioxide(CO_(2))*** from the forest with superior light penetration and fast gas transport,a TiO_(2)/g-C_(3)N_(4)composite nanowire arrays(NAs)film with maximized light utilization is *** is achieved by in-situ coating a thin layer of g-C_(3)N_(4)(as the leaf)on the vertically-oriented TiO_(2)arrays(as tree trunks)on Ti foil(as soil).Benefiting from the effective charge separation by S-scheme charge transfer,intimate contact by the in-situ growth as well as the ingenious structure,the composite,readily recyclable,displays exciting performance in photocatalytic CO_(2)*** is beyond doubt that the combination of heterojunction construction and“nature-inspired biomimetic photocatalyst”design promises practical applications and industrial use.

关键词： Carbon neutralization Solar fuels Intimate interfacial contact S-scheme heterojunction Biomimetic photocatalyst

来源：评论

学校读者我要写书评

暂无评论

Hierarchical zeolites containing embedded Cd0.2Zn0.8S as a photocatalyst for hydrogen production from seawater

引用

Chemical Communications 2023年第47期59卷 7275-7278页

作者： Yuan, Yue Wu, Feng-Juan Xiao, Shi-Tian Wang, Yi-Tian Yin, Zhi-Wen Van Tendeloo, Gustaaf Chang, Gang-Gang Tian, Ge Hu, Zhi-Yi Wu, Si-Ming Yang, Xiao-Yu State Key Laboratory of Advanced Technology for Materials Synthesis and Processing School of Materials Science and Engineering & Nanostructure Research Centre Chemical Engineering and Life Science School of Chemistry Shenzhen Research Institute Wuhan University of Technology Wuhan430070 China Electron Microscopy for Materials Science University of Antwerp AntwerpenB-2020 Belgium

Uncovering an efficient and stable photocatalytic system for seawater splitting is a highly desirable but challenging goal. Herein, Cd0.2Zn0.8S@Silicalite-1 (CZS@S-1) composites, in which CZS is embedded in the hierarchical zeolite S-1, were prepared and show remarkably high activity, stability and salt resistance in seawater. © 2023 The Royal Society of Chemistry

关键词： Seawater

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：