The performance of composite ceramic armor penetrated by rod projectile was studied by both numerical simulation and *** penetration and damage mechanisms of the projectile-armor after high-speed collision were also o...
详细信息
The performance of composite ceramic armor penetrated by rod projectile was studied by both numerical simulation and *** penetration and damage mechanisms of the projectile-armor after high-speed collision were also observed by high-speed *** experimental results showed that the ballistic performance of composite ceramic armor was highly affected by the density,hardness and toughness of bulletproof *** flow stress of the failed bulletproof ceramic is not only related to the pressure but also related to the strain *** phenomenological method based on Bodner-Partom ceramic model was introduced to derive the growth rate of *** simulation results show good agreement with the experimental results.
The effects of activated sintering technology of H2 atmosphere sintering on the microstructure and properties of W-15Cu alloy using ultrafine W-15Cu composite powder fabricated by spray drying calcining-continuous red...
详细信息
The effects of activated sintering technology of H2 atmosphere sintering on the microstructure and properties of W-15Cu alloy using ultrafine W-15Cu composite powder fabricated by spray drying calcining-continuous reduction technology were *** experimental results showed that W-15Cu alloy,consolidated by activated sintering technology of H2 atmosphere sintering for 1 h at 1300 ℃,with 98.5 % relative density,transverse rupture strength 1218 MPa,Vickers hardness HV0.5 378,average grain size about 1.2 μm and thermal conductivity 192 W/m·K,was *** comparison to the normal sintering process,activated sintering process to W-15Cu alloy could be achieved at lower sintering ***,better properties in activated sintered compacts were obtained,and activated sintering process resulted in finer microstructure and excellent properties.
Low or zero thermal expansion porous ceramics are required for several applications. In this work near zero thermal expansion porous ceramics were fabricated by using SiC and ZrW2O8 as positive and negative thermal ex...
详细信息
Low or zero thermal expansion porous ceramics are required for several applications. In this work near zero thermal expansion porous ceramics were fabricated by using SiC and ZrW2O8 as positive and negative thermal expansion materials, respectively, bonded by soda lime glass. The mixture of SiC, ZrW2O8 and soda lime glass was sintered by Pulsed Electric Current Sintering (PECS, or sometimes called Spark Plasma Sintering, SPS) at 700°C. Sintered samples with ZrW2O 8 particle size smaller than 25 μm have high thermal expansion coefficient, because ZrW2O8 has the reaction with soda lime glass to form Na2ZrW3O12 during sintering process. The reaction between soda lime glass and ZrW2O8 is reduced by increasing particle size of ZrW2O8. Sintered sample with ZrW2O8 particle size 45-90 μm shows near zero thermal expansion.
Both in-phase and anti-phase two-soliton bound states were observed in a carbon-nanotube based mode-locked fiber laser. This paper also reports preliminary results of bound states with graphene as the saturable absorb...
详细信息
ISBN:
(纸本)9780977565771
Both in-phase and anti-phase two-soliton bound states were observed in a carbon-nanotube based mode-locked fiber laser. This paper also reports preliminary results of bound states with graphene as the saturable absorber for the first time.
作者：
Xingguo FengMingren SunGnangze TangXinxin MaSchool of Materials Science and Engineering
Harbin Institute of TechnologyHarbin 150001China National Key Laboratory of Science and Technology on Precision Hot Processing of MetalsHarbin Institute of TechnologyHarbin 150001China State Key Laboratory of Advanced Welding and JoiningHarbin Institute of Technology Harbin 150001China
The B4C-ZrB2-SiC ternary composites with super hard and high toughness were obtained by arc melting in argon atmosphere. Microstructures were observed by SEM, and phase compositions were analyzed by XRD. The hardness ...
详细信息
The B4C-ZrB2-SiC ternary composites with super hard and high toughness were obtained by arc melting in argon atmosphere. Microstructures were observed by SEM, and phase compositions were analyzed by XRD. The hardness and fracture toughness of ternary composites are 28GPa and 4.5MPa-m1/2. The eutectic mole composition is 0.39B4C-0.25ZrB2-0.36SiC, and the eutectic lamellar microstructure is composed of B4C matrix with the lamellar ZrB2 and SiC grains.
Using steel slag and charcoal as raw materials, the steel slag/charcoal nano-/micro-composites with magnetic-resistance mixed loss mode were fabricated by a high-performance milling process, and then the composition, ...
详细信息
Using steel slag and charcoal as raw materials, the steel slag/charcoal nano-/micro-composites with magnetic-resistance mixed loss mode were fabricated by a high-performance milling process, and then the composition, phase structure, morphology, and electromagnetic (EM) characteristics of the products were characterized by XRD, EDS, SEM, and vector network analyzer, respectively. The results showed that EM characteristics of the products were strongly dependent on the content of the charcoal (WCharcoal). The real and imaginary parts of the permittivity of the steel slag/charcoal nano-/micro-composites significantly increased with the increasing WCharcoal. Among them, the steel slag/charcoal composites with WCharcoal=50wt% exhibited the best EM-wave absorption performance, with a maximum reflectivity value of -33.4dB, the effective bandwidth 15.2GHz(<-10dB) and 8.6 GHz (<-20 dB), respectively, which is a consequence of enhanced dielectric loss and a proper EM matching.
This paper introduces a numerical method for predicting the effective elastic module of ZrB2-based composites, which includes a random generation-growth method for generating microstructures of ZrB2-based composites b...
详细信息
This paper introduces a numerical method for predicting the effective elastic module of ZrB2-based composites, which includes a random generation-growth method for generating microstructures of ZrB2-based composites based on existing statistical macroscopic geometrical characteristics and a highly efficient lattice Boltzmann algorithm for solving the governing equations on the multiphase microstructures. The effective elastic module of random ZrB2-based materials is analyzed with different parameters by the present method, including effects of component size and material anisotropy. The simulation results indicate this numerical method's effectiveness and robustness by comparing the predictions with experimental data and other theoretical models.
The back-propagation neural （BPN） network was proposed to model the relationship between the parameters of the dieless draw- ing process and the microstrecmres of the QSi3-1 silicon bronze alloy. Combined with image...
详细信息
The back-propagation neural （BPN） network was proposed to model the relationship between the parameters of the dieless draw- ing process and the microstrecmres of the QSi3-1 silicon bronze alloy. Combined with image processing techniques, grain sizes and grain-boundary morphologies were respectively determined by the quantitative metallographic method and the flactal theory. The outcomes obtained show that the deformed microstructures exhibit typical fractal features, and the boundaries can be characterized quantitatively by ffactal dimensions. With the temperature of 600-800℃ and the drawing speed of 0.67-1.00 mm-s-1, either a lower temperature or a higher speed will cause a smaller grain size together with an elevated fractal dimension. The developed model can be capable for forecasting the microstructure evolution with a minimum error. The average relative errors between the predicted results and the experimental values of grain size and fractal dimension are 3.9% and 0.9%, respectively.
暂无评论