AgPb18SbTe20 samples were prepared by cooling from melts at three different rates as quenching, furnace cooling and controlled slow cooling rate of 10C /h, and the correlation between cooling rates and samples microst...
详细信息
Single-phase double atoms filling skutterudite compounds were synthesized by using melting reaction method. The effects of double atoms filling on the structure and lattice thermal conductivity of skutterudite compoun...
详细信息
Single-phase double atoms filling skutterudite compounds were synthesized by using melting reaction method. The effects of double atoms filling on the structure and lattice thermal conductivity of skutterudite compounds were investigated. The results of Rietveld refinement indicate that Ca mCenFexCo4-xSb12 compounds possess skutterudite structure and the Sb-icosahedron voids have been partially filled with filling atoms. With the same filling fraction, the lattice thermal conductivity of CamCenFexCo 4-xSb12 is smaller than that of CamFe xCo4-xSb12 and CenFe xCo4-xSb12, furthermore, when the total filling fraction (m+n) is about 0.3 and respective filling fraction of Ca and Ce are approximately equal, the lattice thermal conductivity is the least.
Ag1-xPbmSbTe2+m (m = 6, 10, 18;x = 0, 0.5, 0.75) compounds were prepared by melting-spark plasma sintering (SPS) process. The effects of m and x on the thermoelectric properties of the compounds were investigated. The...
详细信息
Ag1-xPbmSbTe2+m (m = 6, 10, 18;x = 0, 0.5, 0.75) compounds were prepared by melting-spark plasma sintering (SPS) process. The effects of m and x on the thermoelectric properties of the compounds were investigated. The results indicate that all samples are n-type conduction. For Ag1-xPb18SbTe20 (x = 0, 0.5, 0.75), the electrical conductivity decreases, whereas Seebeck coefficient increases, with increasing Ag concentration. For AgPbmSbTe 2+m (m = 6, 10, 18), as m increases, the Seebeck coefficient slightly decreases and the electrical conductivity increases first, with a maximum at m =10, and then decreases. The thermal conductivity increases with increasing m.
Radix salvia miltiorrhiza is a commonly used herbal medicine in China, and tanshinone IIA is one of the major active ingredients. Nano Radix salvia miltiorrhiza particles were successfully prepared by high speed centr...
详细信息
Radix salvia miltiorrhiza is a commonly used herbal medicine in China, and tanshinone IIA is one of the major active ingredients. Nano Radix salvia miltiorrhiza particles were successfully prepared by high speed centrifugal sheering (HSCS) technology, and the prepared nanoparticles suspension was subsequently spray-dried. The different properties of nano particles and raw powder were systematically studied by laser light scattering granulometric analyzer, TEM, SEM and FTIR. The extractive quantity of tanshinone IIA was determined by high-performance liquid chromatography (HPLC). The results illustrate that raw Radix salvia miltiorrhiza powder can be ultrafinely ground to nanosize within 50min, and the molecular structure of active ingredients doesn't change after being ground. Furthermore, the active ingredients can dissolve out directly and fully, and the extractive ratio of tanshinone IIA increases 28.6% by HSCS processing. It is valuable to combine nanotechnology and TCM to improve the bioavailability and rapid releasing.
TiCoSb-based half-Heusler compounds with the substitution of Zr for Ti have been prepared quickly by combining high-energy ball milling method with spark plasma sintering technique, and their thermal transport propert...
详细信息
TiCoSb-based half-Heusler compounds with the substitution of Zr for Ti have been prepared quickly by combining high-energy ball milling method with spark plasma sintering technique, and their thermal transport properties have been investigated. With the increase of the concentration of Zr, the thermal conductivity of Til-xZrxCoSb compounds decreases significantly. Compared with the thermal conductivity of TiCoSb compound, that of Ti0.5Zr0.5CoSb decreases by 200% at 1000 K.
To describe the real world which is a harmonious unification world with both de- terminism and randomness, we propose a harmonious unifying hybrid preferential model (HUHPM) of a certain class of complex dynamical net...
详细信息
To describe the real world which is a harmonious unification world with both de- terminism and randomness, we propose a harmonious unifying hybrid preferential model (HUHPM) of a certain class of complex dynamical networks. HUHPM is gov- erned only by the total hybrid ratio d/r according to the practical need. As some typical examples, the concepts and methods of the HUHPM are applied to the un-weighted BA model proposed by Barabási et al., the weighted BBV model pro- posed by Barat et al. and the weighted TDE model proposed by Wang et al. to get the so-called HUHPM-BA network, HUHPM-BBV network and HUHPM-TDE network. These HUHPM networks are investigated both analytically and numerically. It is found that the HUHPM reveals several universal properties, which more approach to the real-world networks for both un-weighted and weighted networks and have potential for applications.
Three-dimension reconstruction from serial sections has been used in the last decade to obtain information concerning three-dimensional microstructural ge-ometry. One of the crucial steps of three-dimension reconstruc...
详细信息
Three-dimension reconstruction from serial sections has been used in the last decade to obtain information concerning three-dimensional microstructural ge-ometry. One of the crucial steps of three-dimension reconstruction is getting compact and fairing grain contours. Based on the achievement of closed raw con-tours of ceramic composite grains by using wavelet and level set, an adaptive method is adopted for the polygonal approximation of the digitized raw contours. Instead of setting a fixed length of support region in advance, the novel method computes the suitable length of support region for each point to find the best es-timated curvature. The dominant points are identified as the points with local maximum estimated curvatures. Periodic closed B-spline approximation is used to find the most compact B-spline grain boundary contours within the given tolerance. A flexible distance selection approach is adopted to obtain the common knot vector of serial contours consisting of less knots that contain enough degrees of freedom to guarantee the existence of a B-spline curve interpolating each contour. Finally, a B-spline surface interpolating the serial contours is generated via B-spline surface skinning.
Nanocomposite WC-10Co powder produced by spray pyrolysis-continuous reduction & carbonization technology and cubic boron nitride (CBN) plated with titanium by vacuum vapor deposit were used, and this paper adopted...
详细信息
Nanocomposite WC-10Co powder produced by spray pyrolysis-continuous reduction & carbonization technology and cubic boron nitride (CBN) plated with titanium by vacuum vapor deposit were used, and this paper adopted spark plasma sintering (SPS) process to prepare CBN enhanced ultrafine WC-10Co cemented carbide cermets composite material. The microstructure and mechanical properties of CBN-WC-10Co composites were investigated. The results show that CBN-WC-10Co composites consolidated by spark plasma sintering can reach 95.0 % relative density, and transverse rupture strength (TRS) is 1050 MPa, the average grain size of cermets matrix is less than 420 nm, and CBN-WC-10Co composites with excellent properties are achieved. The CBN still remains very good crystal shape after 1240°C spark plasma sintering, and there is not obvious clearance between CBN plated with titanium and the cermets matrix, the coated titanium layer can not only improve the thermal stability of CBN, but also increase the properties of CBN-WC-10Co composites.
In this study, SnO2-based ceramics, with 0.5%CuO as sintering aid and Sb2O3 as activator of the electrical conductivity, was obtained by pressureless sintering at 1450°C for 5 h. Densification behavior and micros...
详细信息
In this study, SnO2-based ceramics, with 0.5%CuO as sintering aid and Sb2O3 as activator of the electrical conductivity, was obtained by pressureless sintering at 1450°C for 5 h. Densification behavior and microstructure development strongly depend on Sb2O 3. The characteristization of microstructures on Sb2O 3 concentrations are analyzed by SEM. A small amount of CuO improves densification;Sb2O3 retards the densification of SnO 2-based ceramic. The electrical resistivities of SnO 2-based ceramics with different contents of Sb2O 3 are measured by the standard four probe method and varied in a wide range. The electrical resistivity arrives the minimal value of 4.964×10-2 Ω·cm for 99%SnO2+0.5%CuO +0.5%Sb2O3. More content of Sb2O3 than that of CuO causes the degression of density and the increasing of electrical resistivity of ceramics.
MoSi2 is one of the few intermetallics to have potential for farther systems. However, the use of MoSi2 has been hindered due to the brittle nature of the material at low temperatures, inadequate creep resistance at h...
详细信息
MoSi2 is one of the few intermetallics to have potential for farther systems. However, the use of MoSi2 has been hindered due to the brittle nature of the material at low temperatures, inadequate creep resistance at high temperatures, accelerated (pest) oxidation at temperatures between 450-550°C. In this investigation Mo(Al,Si2)/Ti 3SiC2 composites has been prepared by reaction hot-pressing from Mo, Si, SiC, Ti, Al powder mixture under different temperatures. XRD results show that the main products are Mo(Si,Al)2 and Ti3SiC2. Part of TiC and SiC also appeared at low treating temperature. With the treating temperature increasing SiC disappeared. No evidence show lattice change of Mo(Si,Al)2. It must be the results of sufficient Al added. The electrical conductivity properties were also investigated. Samples treating under different temperatures showed different changes. Samples under high treating temperature showed a near linear change ranging from 27∼800°C and Samples under low treating temperature showed a nonlinear change.
暂无评论