Composite particles consisting of polyaniline( PAn) core and barium tilanate ( BaTiO3) Layer shell were synthesized. The PAn-BaTiO3 composites particles were characterized with TEM and XRD. The dielectric behavior of ...
详细信息
Composite particles consisting of polyaniline( PAn) core and barium tilanate ( BaTiO3) Layer shell were synthesized. The PAn-BaTiO3 composites particles were characterized with TEM and XRD. The dielectric behavior of particles was tested and the electrorhcologicak(ER) behavior of the suspensions of PAn/ BaTiO3 panicles in chlorinated paraffin oil with a 20vol % was investigated under DC electric field. The results show that the ER effect of composite particle is far stronger than that of pure polyaniline and barium titanate which mere synthesized by the stone method. pH and thickness of BuTiO3 have an important. influence on the ER effects.
The influence of pretreatment of fibre on interfacial and mechanical properties of glass fibre/ polypropylene composites was investigated. Firstly, the glass fibres were coated with the blends of m-IPP (maleic anhydri...
详细信息
The influence of pretreatment of fibre on interfacial and mechanical properties of glass fibre/ polypropylene composites was investigated. Firstly, the glass fibres were coated with the blends of m-IPP (maleic anhydride grafting isotatic polypropylene ) and m-APP ( maleic anhydride grafting amorphous polypropylene) in different, ratios. Secondly, the interfaced reaction of the coated composites was analysed by FTIR, which shows that the interfacial chemical reaction between m-IPP/m-APP in the fibre coating and the fibre surface- bound coupling agent is in existence. Thirdly, the microstructure of the coated composites wax studied by SEM. The results indicate that the coating treatment is effective on improving interfacial adhesion of the, fibre-matrix and the right amount of m-APP added to the coal impels the plastic deformation surrounding the point of cracks , which makes cracks turn to region and prevents from further interface debonding. Lastly, the mechanical properties were evaluated by measurement, of the flexural strength and impact strength of the composites. It was found that, the flexural strength and impact strength of the composites with coating fibre are higher than those of uncoating fibre composite. The results of these investigations draw the conclusion that the pretreatment of fibre with m-IPP/m-APP blends can form an optimize interlayer between the fibre and the PP matrix, which improves both the strength and lough-ness of the composites.
Both titanium and germanium were introduced into silicon dioxide system by sol-gel method to move its region of anomalous dispersion caused by IR resonance absorption towards the wavelength of CO 2 *** is indicated b...
详细信息
Both titanium and germanium were introduced into silicon dioxide system by sol-gel method to move its region of anomalous dispersion caused by IR resonance absorption towards the wavelength of CO 2 *** is indicated by IR absorption spectra that as the content of SiO 2 decreases in this glass system TiO 2 and GeO 2 tends to exist in their own *** for the gel glass with a composition of 40SiO 2·30TiO 2·30GeO 2,when the temperature is below 600℃,germanium atoms exist mainly in Ge-O-Ge *** the temperature increasing from 800℃ to 1000℃, titanium atoms in Si-O-Ti bonds almost transform into Ti-O-Ti ***,a large number of Si-O-Ti and Si-O-Ge bonds formed when the temperature approaches 800℃,which makes a notable IR absorption band round the wavelength of CO 2 ***, sol-gel based SiO 2-TiO 2-GeO 2 gel glass is a candidate material for CO 2 laser hollow waveguide.
Doped SrTiO3 capacitor-varistor multifunctional ceramics were fabricated by a single sintering process. AC complex impedance analysis was performed to investigate electrical features of grains and grain boundaries for...
详细信息
Doped SrTiO3 capacitor-varistor multifunctional ceramics were fabricated by a single sintering process. AC complex impedance analysis was performed to investigate electrical features of grains and grain boundaries for both as-reduced ceramic and reoxidized ceramics. The results showed that the as-reduced ceramic exhibited inductive response at high frequencies above 2 MHz, which is attributed to the contribution of electron behavior in semiconducting grains. The high frequency inductive response disappeared in impedance plots of reoxidized ceramics.
Infrared radiant powder was synthesized by conventional ceramic processing techniques by using Fe2 O3, MnO2, CuO, Co2 O3 and kaolin as raw materials. A novel infrared radant glaze was developed by introducing the infr...
详细信息
Infrared radiant powder was synthesized by conventional ceramic processing techniques by using Fe2 O3, MnO2, CuO, Co2 O3 and kaolin as raw materials. A novel infrared radant glaze was developed by introducing the infrared radiant powder into glazing as a functional additive. Infrared radiant characteristics of the powder and the glaze were investigated. The optimum content of infrared radiant powder in glazing was ascertained to be 5% . The infrared radiant glaze exhibits significant antibacterial and antifungal Junctions due to the thermal effect of infrared radiation. Antibacterial percentages of the glaze reach 91% - 100% when Escherichia coli, Staphylococcus aureus and Bacillus subtilis are used as model bacterium respectively, while antifungal percentage of the glaze exceeds 95% when Penicillum citrinum is used as model fungus.
b Department of Chemistry, Wuhan University, Wuhan, Hubei 430072, China The action of β ( N selenomorpholine) ethyl phenyl ketone hydrochloride and 4 ( N selenomorpholine) 2 butanone hydro chl...
详细信息
b Department of Chemistry, Wuhan University, Wuhan, Hubei 430072, China The action of β ( N selenomorpholine) ethyl phenyl ketone hydrochloride and 4 ( N selenomorpholine) 2 butanone hydro chloride on Escherichia coli and Staphylococcus aureus was studied by microcalorimetry. Differences in their capacities to affect the metabolism of this bacterium were observed. The kinetics shows that the selenomorpholine compounds had action on the metabolism process of Escherichia coli and Staphylococcus aureus. The rate constant ( k ) of the studied bacterium in the presence of the drugs are concentration dependant. The growth rate constants decrease with an increase in the mass of the selenomorpholine compounds, but their relationship is different. As deduced from the rate constant ( k ) of the studied bacterium (in log phase) and the half inhibitory concentration (IC 50 ), the experimental results reveal that the studied selenomorpholine compounds all have good antibiotic activity and better antibacterial activity on Staphylococcus aureus than on Escherichia coli.
In contrast to the commonly used arc melting method, samples in the present paper were prepared by the solid-state reaction from element powders at 1173K under a flowing argon atmosphere for 4-7 days. The constituent ...
详细信息
In contrast to the commonly used arc melting method, samples in the present paper were prepared by the solid-state reaction from element powders at 1173K under a flowing argon atmosphere for 4-7 days. The constituent phases and the element compositions were determined and showing that samples were of single phase and stoichiometric. ZrNiSn powder was then consolidated by using the spark plasma sintering technique. The effect of sintering temperature and holding time on the density was discussed. It is found that, dense ZrNiSn compounds with fine grain size and homogeneous microstructure were achieved under the condition of 1123K-40MPa-25min.
Millimeter wave processing of materials is a method which has wide application prospect for improving material characteristics. In this paper, the investigated results of millimeter wave processing of materials in IEC...
详细信息
ISBN:
(纸本)0780374231
Millimeter wave processing of materials is a method which has wide application prospect for improving material characteristics. In this paper, the investigated results of millimeter wave processing of materials in IECAS, such as millimeter wave sintering of Al/sub 2/O/sub 3/, ZnO, Nd/sub 2/Ti/sub 3/O/sub 9/, and chemical syntheses of spinels LiMn/sub 2/O/sub 4/ and LiCo/sub 0.1/Mn/sub 1.99/O/sub 3.92/S/sub 0.08/, as cathode materials of Li-ion batteries, with millimeter wave heating are presented.
A kind of W/W-Mo/Mo system layered flier-plate material (LFP) was fabricated in this study by the methods of powder metallurgy and bonding together. Such LFP had high parallelism,planeness and densification and its de...
详细信息
A kind of W/W-Mo/Mo system layered flier-plate material (LFP) was fabricated in this study by the methods of powder metallurgy and bonding together. Such LFP had high parallelism,planeness and densification and its density varied from 17.25x103 kg/m3 to 10.22x103 kg/m3 through a total thickness of 3.0 mm. The W-Mo interlayer of this LFP was obtained by hot-press sintering and its densification at 1573 K was studied. Then by using additives 4Ni-3Cu (in wt pct), the LFP was fabricated under 1573 K-30 MPa-60 min. The mechanism of the interfacial bonding of the W/W-Mo/Mo system LFP was also mainly investigated.
Al/Al2O3 composites of different ratios were hot-press sintered at 575～640℃ under a pressure of 30 MPa for 2 h in a vacuum furnace. It was found that the relative density of the Al/Al2O3composites could be increased...
详细信息
Al/Al2O3 composites of different ratios were hot-press sintered at 575～640℃ under a pressure of 30 MPa for 2 h in a vacuum furnace. It was found that the relative density of the Al/Al2O3composites could be increased evidently with the rise of sinter temperature. No reaction occurred between Al and Al2O3 at the sinter temperatures. Under 640℃-30 MPa-2 h experimental condition, Al/Al2O3 system FGM was successfully fabricated, and its density range changed quasi-continuously from 2.887x103 kg/m3 to 3.1909x103 kg/m3 within the middle 1.0 mmthickness range.
暂无评论