检索结果-内蒙古大学图书馆

Achieving high strength-ductility synergy in Mg-6Sn-3Zn-0.3Zr(wt.%)alloy via a combination of casting,pre-treatment and hot extrusion

引用

Journal of Magnesium and Alloys 2024年第11期12卷 4622-4645页

作者： Tianshui Zhou Yaqin Li Feifei Guo Qinglin Li Zhi Jia Dexue Liu School of Materials Science and Engineering Lanzhou University of TechnologyLanzhou 730050China State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals Lanzhou University of TechnologyLanzhou 730050China

Achieving the strength-ductility synergy in Mg alloys is a gigantic challenge,especially in rare-earth-free Mg *** this study,a new Mg-Sn-Zn-Zr alloy with high ultimate tensile strength(~284-326 MPa)without sacrificing elongation-to-failure(~22.1-27.6%)was developed by utilizing casting,pre-treatment and hot *** random rather than basal texture is observed both in as-cast and pre-treatment ***,the strong texture is effectively weakened via hot extrusion whilst remaining *** importantly,after hot extrusion,the grain sizes of as-cast and pre-treatment samples were significantly refined down to about 10μ*** of as-extruded microstructures of the alloy reveals that the grain refinement is highly associated with the particle stimulated nucleation(PSN)and continuous/discontinuous dynamic recrystallization(C/DDRX)***,the results suggest that the combination of pre-treatment and hot extrusion not only promotes multiplication of geometrically-necessary dislocations(GNDs)but enhances dynamic precipitation,which boosts the formation of fine and homogenous *** on the results of X-ray diffraction(XRD),transmission electron microscope(TEM)and selected area electron diffraction(SAED),the precipitates are Mg_(2)Sn ***,the main orientation relationship identified by high resolution TEM(HRTEM)between Mg_(2)Sn phases andα-Mg matrix could be described as(111)Mg_(2)Snor(220)Mg_(2)Sn∥(0001)Mgwith a coherent *** refined grains size,ultra-fine precipitates and high density of GNDs would substantially contribute to the enhancement of the strength and the corresponding contributions are calculated to be~183-185 MPa,~30.9-38 MPa and~14.2-31.7 MPa,***,texture weakening or randomizing,grain refinement and coherent interfaces are mainly responsible for the high *** current study can provide beneficial insights into the development of high-performance rare-earth-

关键词： Mg-Sn-Zn-Zr alloy Hot extrusion Pre-treatment Mechanical properties Microstructure evolution Strengthening and plasticity mechanisms

来源：评论

学校读者我要写书评

暂无评论

基于织构工程优化的n型Ag2Se薄膜热电性能增强研究（英文）

引用

Science China materials 2025年第5期68卷 1630-1637页

作者：张新洋贺丹琪陈李莎黄同露叶先锋李浩天朱婉婷聂晓蕾余健张玉魏平赵文俞张清杰 State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Hubei Key Laboratory of Theory and Application of Advanced Materials Mechanics Wuhan University of Technology School of Materials Science and Engineering Jiujiang University Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory

柔性热电发电技术日益被认为是为可穿戴电子设备供电的有效解决方案.然而,n型柔性薄膜的性能局限性限制了其更广泛的应用.本研究通过织构工程技术获得了高性能n型Ag2Se薄膜,在300 K时,功率因子高达2.14 mW m-1K-2.我们采用简单的蒸发镀... 详细信息

柔性热电发电技术日益被认为是为可穿戴电子设备供电的有效解决方案.然而,n型柔性薄膜的性能局限性限制了其更广泛的应用.本研究通过织构工程技术获得了高性能n型Ag2Se薄膜,在300 K时,功率因子高达2.14 mW m-1K-2.我们采用简单的蒸发镀膜技术,结合前驱体调控策略,制备了（201）取向的n型Ag2Se薄膜.实验和理论分析均表明,这种择优取向的Ag2Se薄膜具有高迁移率和高Seebeck系数.此外,纳米孔和随机面内取向结构的引入,显著散射了不同波长声子,从而使Ag2Se热导率进一步降低.最终,在363 K时,Ag2Se薄膜ZT值高达0.73.本研究不仅提出了一种调控Ag2Se薄膜晶体取向的策略方法,还为开发高性能热电薄膜材料创造了新的前景.

关键词： Ag2Se film texture engineering preferred orientation electrical properties thermoelectric performance

来源：评论

学校读者我要写书评

暂无评论

Preparation of ultra-high ductility and high strength Mg-Sn-Zn-Zr alloy by differential thermal ECAP(DT-ECAP)induced heterogeneous structure

引用

Journal of materials Science & technology 2024年第32期199卷 222-245页

作者： Tianshui Zhou Bing Wang Yaqin Li Shiwen Hu Xiaoqiang Li Dexue Liu State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals Lanzhou University of TechnologyLanzhou 730050China School of Materials Science and Engineering Lanzhou University of TechnologyLanzhou 730050China

Developing high-ductility magnesium(Mg)alloys has become an imminent issue for their wide *** this work,a new Mg-Sn-Zn-Zr alloy with ultra-high ductility(elongation,*** 40%)and high ultimate tensile strength(UTS,~309-354 MPa)was prepared by a novel differential thermal equal-channel angular pressing(DT-ECAP).Heterogeneous structures,including bimodal grain structures and in-homogeneous distribution of second phases composed of banded structure and particle free zone(PFZ),were induced by DT-ECAP *** on the results of electron backscatter diffraction(EBSD),trans-mission electron microscopy(TEM),high-resolution TEM(HRTEM),and selected area electron diffraction(SAED),the bimodal grain structure originated from incomplete dynamic recrystallization(DRX)domi-nated by Zener pinning,strain-induced grain boundary migration(SIBM)and the limitation of polycrys-tallization due to lower dislocation ***,the bimodal distribution of second phases was highly associated with the defect density and initial *** importantly,the enhanced strength of DT-ECAPed alloys can be primarily attributed to hetero-deformation induced(HDI)strengthening,grain boundary strengthening,and precipitation ***,HDI hardening,texture weakening or randomizing activation of non-basal slip,high density of dislocations in sub-structures,and twining in-duced superior work-hardening effect,which was highly responsible for the ultra-high ductility in sixth pass(6P)*** current work provides a novel DT-ECAP process for inducing heterogeneous structure and offers beneficial insight into the development of ultra-high ductility and high strength for rare-earth-free Mg alloys via a combination of HDI strengthening and hardening and other vital mechanisms.

关键词： DT-ECAP process Heterogeneous structures HDI strengthening and hardening Mechanical properties Mg-Sn-Zn-Zr alloy

来源：评论

学校读者我要写书评

暂无评论

Electrolyte effect on electrochemical behaviors of manganese fluoride material for aqueous asymmetric and symmetric supercapacitors

引用

Rare Metals 2024年第3期43卷 1048-1061页

作者： Zheng-Hua He Jian-Fei Gao Ling-Bin Kong State Key Laboratory of Advanced Processing and Recycling of Non-Ferrous Metals Lanzhou University of TechnologyLanzhou730050China School of Materials Science and Engineering Lanzhou University of TechnologyLanzhou730050China

Exploring wide voltage window materials is not only an available measure to enhance the energy density of hybrid supercapacitor(HSCs),but also avoids the dynamic mismatch caused by different energy storage mechanisms of two electrodes in assembled symmetrical ***,there are few reports about the wide potential window materials except Bi_(2)O_(3)and VO_(2).Therefore,the MnF_(2)synthesized by solvothermal reaction was served as the electrode for *** MnF_(2)exhibited electrochemical activity in alkaline solution in three-electrode system,especially with a wide potential window from-0.8 to+0.5 V in 2 mol·L^(-1)***,the assembled MnF_(2)//MnF_(2)symmetrical HSC had a potential window of 1.5 V,and it exhibited outstanding long-cycle ***,when MnF_(2)was taken as the negative and positive respectively,the potential windows of asymmetric devices CoMoO_(4)//MnF_(2)and MnF_(2)//Activated Carbon(AC)could reach 1.3 and 1.45 V,respectively,showing excellent cycle *** work shows that MnF_(2)material has great research value in HSC,and provides a new research direction for developing high-performance devices.

关键词： Manganese fluoride Potential window Hybrid supercapacitors Electrochemical performance

来源：评论

学校读者我要写书评

暂无评论

Mitigating the dissolution of V_(2)O_(5) in aqueous ZnSO_(4) electrolyte through Ti-doping for zinc storage

引用

Chinese Chemical Letters 2024年第1期35卷 558-562页

作者： Zihe Wei Xuehua Wang Ting Zhu Ping Hu Liqiang Mai Liang Zhou Hubei Longzhong Laboratory Wuhan University of Technology(Xiangyang Demonstration Zone)Xiangyang 441000China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China School of Materials Science and Engineering Wuhan Institute of TechnologyWuhan 430205China Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory Xianhu Hydrogen ValleyFoshan 528200China

Aqueous zinc-ion batteries(AZIBs)have become a hotspot for electrochemical energy storage owing to the high safety,low cost,environmental friendliness,and favorable rate ***,the serious dissolution of cathode materials in aqueous electrolytes would lead to poor cyclability,which should be addressed before ***,we designed a Ti-doped V_(2)O_(5) with yolk-shell microspherical structure for *** Ti doping stabilizes the crystal structure and relieves the dissolution of V_(2)O_(5) in aqueous ZnSO_(4) *** optimized sample,Ti_(0.2)V_(1.8)O_(4.9),delivers a high capacity(355 mAh/g at 0.05 A/g)as well as good capacity retention(89%after 2500 cycles at 1.0 A/g).This work provides an effective strategy to mitigate the dissolution of cathode material in aqueous ZnSO_(4) electrolyte for cyclability enhancement.

关键词： Aqueous zinc-ion batteries V_(2)O_(5)cathode materials Aqueous ZnSO_(4)electrolyte Yolk-shell structure Ti doping

来源：评论

学校读者我要写书评

暂无评论

Laser Powder Bed Fusion of Beta-Type Titanium Alloys for Biomedical Application:A Review

引用

Acta Metallurgica Sinica(English Letters) 2024年第1期37卷 17-28页

作者： Xuan Luo Chao Yang Dongdong Li Lai-Chang Zhang State Key Laboratory of Materials Processing and Die&Mould Technology Huazhong University of Science and TechnologyWuhan430074China National Engineering Research Center of Near-Net-Shape Forming for Metallic Materials Guangdong Provincial Key Laboratory for Processing and Forming of Advanced Metallic MaterialsSouth China University of TechnologyGuangzhou510640China Centre for Advanced Materials and Manufacturing School of EngineeringEdith Cowan University270 Joondalup DriveJoondalupPerthWA6027Australia

Additive manufacturing ofβ-type titanium alloy is expected to replace Ti-6Al-4V alloy in the field of orthopedic implantation because of their low elastic modulus,excellent corrosion resistance,and *** briefly introducing the laser powder bed fusion(LPBF)process and physical phenomena,this paper reviews the recent progresses in LPBF-edβ-type Ti *** strategies to strengthening and tougheningβ-type Ti alloys are critically *** is followed by the processing routes employed to achieve to low modulus for orthopedic applications,especially a new methodology for tailoring crystallographic orientation called multi-track coupled directional *** effect of processing and compositions on performance metrics ofβ-type Ti alloys included corrosion behavior,and biocompatibility is *** the end,challenges in additive manufacturing ofβ-type Ti alloys in future are highlighted,with the aim to ensue clinical application of LPBF-edβ-type Ti alloys.

关键词： β-type Ti alloys Laser powder bed fusion Mechanical properties Elastic modulus Biocompatibility

来源：评论

学校读者我要写书评

暂无评论

A room-temperature magnetic semiconductor from a Co-Fe-Nb-B metallic glass

引用

Science China(Physics,Mechanics & Astronomy) 2023年第4期66卷 94-99页

作者： Yu-Zhang Jiao Dmitry VLouzguine-Luzgin Ke-Fu Yao Zheng-Jun Zhang Na Chen Laboratory for Advanced Materials Processing Technology(MOE) State Key Laboratory of New Ceramics and Fine ProcessingSchool of Materials Science and EngineeringTsinghua UniversityBeijing 100084China Key Laboratory for Advanced Materials(MOE) Schoolof Materials Science and EngineeringTsinghua UniversityBeijing 100084China Advanced Institute for Materials Research(WPI-AIMR) Tohoku UniversitySendai 980-8577Japan Mathematics for Advanced Materials-OIL National Institute of Advanced Industrial Science and Technology(AIST)Sendai 980-8577Japan

Magnetic semiconductors with Curie temperatures higher than room temperature show potential for developing spintronic devices with combined data processing and storage functions for next-generation computing *** this study,we present an n-type Co_(19.8)Fe_(8.6)Nb_(4.3)B_(6.0)O_(61.3) magnetic semiconductor with a high Curie temperature of~559 *** magnetic semiconductor has a room-temperature resistivity of~2.10×10^(4)Ωcm and a saturation magnetization of~76 emu/cm^(3).The n-type Co_(19.8)Fe_(8.6)Nb_(4.3)B_(6.0)O_(61.3)magnetic semiconductor was deposited on p-type silicon to form a heterojunction,exhibiting a rectifying *** results provide the design principles for discovering high Curie temperature magnetic semiconductors with determined conduction types,which would play an essential role in realizing nonvolatile spin-based transistors that break free from the confines of currently established Si-based information technology.

关键词： magnetic semiconductor ferromagnetic metallic glass high Curie temperature

来源：评论

学校读者我要写书评

暂无评论

Enhanced rate capability and cycle stability of Ti2C MXene for sodium storage through an aniline molecules welding strategy

引用

Tungsten 2025年第1期7卷 161-171页

作者： Hao Chen Ya-Qin Wang Dong-Ting Zhang Bei Zhao Min-Peng Li Chen-Yang Li Tian-Peng Xu Mao-Cheng Liu State Key Laboratory of Advanced Processing and Recycling of Non-Ferrous Metals Lanzhou University of Technology School of Materials Science and Engineering Lanzhou University of Technology School of Computer and Communication Technology Lanzhou University of Technology

MXenes obtained significant attention in the field of energy storage devices due to their characteristic layered structure,modifiable surface functional groups,large electrochemically active surface,and regulable interlayer ***,the self-restacking and sluggish ions diffusion kinetics performance of MXenes during the alkali metal ions insertion/extraction process severely impedes their cycle stability and rate *** paper proposes an aniline molecule welding strategy for welding p-phenylenediamine（PPDA） into the interlayers of Ti2C through a dehydration condensation *** welded PPDA molecules can contribute pillar effect to the layered structure of *** pillar effect effectively maintains the structural stability during the sodium ions insertion/extraction process and effectively expands the interlayer spacing of Ti2C from 1.16 to 1.38 nm,thereby enhancing ions diffusion kinetics performance and improving the long-term cycle *** Ti2C-PPDA demonstrates outstanding Na+storage capability,exhibiting a specific capacity of 100.2 mAh·g-1at a current density of 0.1 A·g-1over 960 cycles and delivering a remarkable rate capability 81.2 mAh·g-1at a current density of 5 A·*** study demonstrates that expanding interlayer spacing is a promising strategy to enhance the Na+storage capacity and improve long-term cycling stability,which provides significant guidance for the design of two-dimensional Na+storage materials with high-rate capability and cycle stability.

关键词： Ti_2C Expanding interlayer spacing Sodium ions storage Diffusion kinetics Rate capability

来源：评论

学校读者我要写书评

暂无评论

Effect of Y:Zn ratio on microstructure and emission of Er^(3+)/Yb^(3+) codoped Y_(2)O_(3)-ZnO ceramic phosphors

引用

Journal of Rare Earths 2023年第12期41卷 1883-1894,I0003页

作者： Boxu Xu Chao Song Jie Song Rui Huang Shaomin Lin Zhenxu Lin Yi Zhang Dejian Hou Jun Song School of Materials Science and Engineering Hanshan Normal UniversityChaozhou521041China Key Laboratory of Optoelectronic Devices and Systemsof MinistryofEducation and Guangdong Province College of Optoelectronic EngineeringShenzhen UniversityShenzhen518060China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan430070China

In this study,Er^(3+)/Yb^(3+)codoped Y_(2)O_(3)-ZnO ceramic phosphors were prepared by sol-gel *** samples had two emission bands,namely,green(535 nm) and red(660 nm),which are attributed to Er^(3+):^(2)H_(11/2)(^(4)S_(3/2))→^(4)I_(15/2)and Er^(3+):^(4)F_(9/2)→^(4)I_(15/2)radiative transitions,*** samples exhibited green-and red-emission intensity enhancement by 1.728 and 2.286 times that of the pure Y2O3host,respectively and by 514.468 and 214.341 times that of the pure ZnO *** emission intensities are first enhanced by lattice *** the change of Y:Zn ratio,the high surface energy is converted into low crystal surface resulting in the change of asymmetry crystal field for *** the intensity of the asymmetric crystal field reaches maximum,both emissions are further *** the high surface energy transforms into crystal surface energy,the microstructure changes into a compact mesoporous ***,the chemical stability of the samples improves significantly,and the final emission band of the three samples with mesoporous structures is continuously red.

关键词： Mesoporous Y_(2)0_(3) Zno Luminescence Rare earths Ceramic phosphors

来源：评论

学校读者我要写书评

暂无评论

Dynamic reconstruction of Ni-Zn alloy solid-electrolyte interface for highly stable Zn anode

引用

Nano Research 2023年第9期16卷 11604-11611页

作者： Qian Zhang Yuhang Dai Kangning Zhao Chengyi Zhang Ruihu Lu Jinghao Li Shuhan Jin Lei Zhang Qinyou An Liqiang Mai State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Department of Physical Science and Technology School of ScienceWuhan University of TechnologyWuhan 430070China Hainan Institute Wuhan University of TechnologySanya 572000China

Aqueous zinc ion batteries(AZIBs)are ideal candidates for large-scale battery storage,with a high theoretical specific capacity,ecological friendliness,and extremely low cost but are strongly hindered by zinc dendrite ***,Ni-Zn alloy is artificially constructed as a solid-electrolyte interface(SEI)for Zn anodes by electrodeposition and *** Ni-Zn alloy layer acts as a dynamic shield at the electrode/electrolyte ***,the zinc atoms migrate out of the electrode body during zinc stripping while merging into the electrode body during the *** this way,the Ni-Zn alloy is able to guide the zinc deposition in the horizontal direction,thereby suppressing the formation of *** from those,the Ni-Zn alloy symmetric cell shows a greatly improved cycle life and is able to operate stably for 1,900 h at a current density of 0.5 mA·cm^(−2).The present study is a strategy for negative electrode protection of AZIBs.

关键词： zinc ion batteries Zn anodes Ni-Zn alloy migration mechanism

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：