检索结果-内蒙古大学图书馆

Titanium nitrides as novel reactants for in-situ synthesis of TiB_(2)-based composites with improved properties

Journal of materials Science & technology 2023年第14期145卷 48-55页

作者： Ji Zou Huayue Liang Jingjing Liu Weimin Wang Fan Zhang Wei Ji Zhengyi Fu State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Hubei Longzhong Laboratory Xiangyang 441000China School of Materials Science and Engineering Wuhan University of TechnologyWuhan 430070China

A novel in-situ reactive approach based on the reactions among TiN,aluminum and boron has been developed to synthesize TiB_(2)-based composites including TiB_(2)-h BN(TB)and TiB_(2)-h BN-AlN(TBA).Fully dense ceramics with fine-grained microstructure were successfully obtained via spark plasma sintering at 1850℃/60 MPa/5 *** analysis suggests h BN flakes were homogenously distributed in the TiB_(2)*** AlN,however,they were elongated into plate-like grains during sintering,in which lots of defects in terms of stacking faults and twinning structures were *** mechanical and thermophysical properties of as-sintered ceramics were comprehensively investigated and ***-corporating AlN significantly improved the flexure strength,hardness,fracture toughness and thermal conductivity of TiB_(2)-h BN *** electrical conductivity of TB(3.06×10^(6)S/m)is larger than that of TBA(2.35×10^(6)S/m)at room temperature,but the value(6×10^(5)S/m)was lower than that of TBA(6.9×10^(5)S/m)at 1173 *** on the measurement of electrical and thermal conductivity,electron and phonon contributions to thermal conductivities of TB and TBA were calculated and their temperature dependences were illustrated.

关键词： Borides Microstructure Spark plasma sintering Mechanical property Thermo-physics property

来源：评论

学校读者我要写书评

暂无评论

Eu3+ doped hydroxyapatite nanowires enabling solid-state electrolytes with enhanced ion transport

引用

Journal of materials Science & technology 2024年第19期186卷 104-109页

作者： Xiaoyue Wang Hong Zhang Lin Xu Liqiang Mai State Key Laboratory of Advanced Technology for Materials Synthesis and Processing School of Materials Science and EngineeringWuhan University of TechnologyWuhan 430070China Hubei Longzhong Laboratory Wuhan University of Technology(Xiangyang Demonstration Zone)Xiangyang 441000China Hainan Institute Wuhan University of TechnologySanya 572000China

The polymer-based solid-state electrolytes (PSEs) are promising for solid-state batteries but they have deficiencies such as low ionic conductivity, low lithium-ion transference number, and unstable electrode/electrolyte interface. Herein, we designed a hydroxyapatite nanowire doped with high-valence cations in anticipation of the formation of positively charged active sites on the nanowire surface. The higher surface activity can reduce the reaction activation energy on the nanowire surface and adsorb the anions in the PSEs as a way to improve the ionic conductivity and Li+ transference number of the PSEs. The active sites on the surface of the nanowires anchor the anions, thus increasing the Li+ transference number to 0.38, which effectively improves the ionic conductivity of the PSE to 1.58 × 10-4 S cm-1 at room temperature. At the same time, the composite polymer electrolyte has a wide electrochemical window. The lithium symmetric cell stably cycles for 800 h at a current density of 0.1 mA cm-2, and the LiFePO4||Li full cell steadily cycles for 180 cycles at a rate of 0.5 C with a capacity retention of 94.2 %. The ion doping strategy to change the surface electrical behavior of nanowires provides an idea to improve the ionic conductivity of solid-state electrolytes.

关键词： Nanowires Ion doping Active site Polymer-based solid-state electrolyte

来源：评论

学校读者我要写书评

暂无评论

Degradation and biocompatibility of one-step electrodeposited magnesium thioctic acid/magnesium hydroxide hybrid coatings on ZE21B alloys for cardiovascular stents

引用

Journal of Magnesium and Alloys 2024年第1期12卷 120-138页

作者： Zhao-Qi Zhang Bing-Zhi Li Pei-Duo Tong Shao-Kang Guan Li Wang Zheng-Hui Qiu Cun-Guo Lin Rong-Chang Zeng School of Material Science and Engineering&Henan Key Laboratory of Advanced Magnesium Alloy&Key Laboratory of Materials Processing and Mold Technology(Ministry of Education) Zhengzhou University100 Science RoadZhengzhou 450001China State Key Laboratory for Marine Corrosion and Protection Luoyang Ship Material Research InstituteQingdao 266101China Corrosion Laboratory for Light Metals College of Material Science and EngineeringShandong University of Science and TechnologyQingdao 266590China

Constructing a functional hybrid coating appears to be a promising strategy for addressing the poor corrosion resistance and insufficient endothelialization of Mg-based ***,the steps for preparing composite coatings are usually complicated and ***,a novel composite coating,composed of bioactive magnesium thioctic acid(MTA)layer formed by deposition and corrosion-resistant magnesium hydroxide(Mg(OH)_(2))layer grown in situ,is simply fabricated on ZE21B alloys via one-step *** electron microscopy(SEM)shows that the electrodeposited coating has a compact and uniform *** the high adhesion of the MTA/Mg(OH)_(2)hybrid coating is also confirmed by the micro-scratch *** test,scanning kelvin probe(SKP),and hydrogen evolution measurement indicate that the hybrid coating effectively reduces the degradation rate of Mg *** experiment and cell culture trial detect that the composite coating is of fine ***,the preparation mechanism of MTA/Mg(OH)_(2)hybrid coatings is discussed and *** coating shows a great potential application for cardiovascular stents.

关键词： Magnesium alloy Corrosion resistance Hybrid coating Endothelialization Biocompatibility

来源：评论

学校读者我要写书评

暂无评论

Single-Atom Lithiophilic Sites Confined within Ordered Porous Carbon for Ultrastable Lithium Metal Anodes

引用

Energy & Environmental materials 2023年第3期6卷 366-372页

作者： Wenzhong Huang Shanlin Liu Ruohan Yu Liang Zhou Zhenhui Liu Liqiang Mai State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Nanostructure Research Centre Wuhan University of TechnologyWuhan 430070China College of Material Science and Engineering Nanjing University of Aeronautics and AstronauticsNanjing 210016China Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory Xianhu hydrogen ValleyFoshan 528200China

Attributing to the high specific capacity and low electrochemical reduction potential,lithium(Li)metal is regarded as the most promising anode for high-energy Li ***,the growth of lithium dendrites and huge volume change seriously limit the development of lithium metal *** overcome these challenges,an ordered mesoporous N-doped carbon with lithiophilic single atoms is proposed to induce uniform nucleation and deposition of Li *** from the synergistic effects of interconnected three-dimensional ordered mesoporous structures and abundant lithiophilic single-atom sites,regulated local current density and rapid mass transfer can be achieved,leading to the uniform Li deposition with inhibition of dendrites and buffered volume *** a result,the as-fabricated anode exhibits a high CE of 99.8%for 200 cycles.A stable voltage hysteresis of 14 mV at 5 mA cm^(−2)could be maintained for more than 1330 h in the symmetric ***,the full cell coupled with commercial LiFePO_(4)exhibits high reversible capacity of 108 mAh g^(−1)and average Coulombic efficiency of 99.8%from 5th to 350th cycles at 1 *** ordered mesoporous carbon host with abundant lithiophilic single-atom sites delivers new inspirations into rational design of high-performance Li metal anodes.

关键词： lithiophilic lithium metal battery ordered mesoporous carbon single atom

来源：评论

学校读者我要写书评

暂无评论

4D printing for future manufacturing

引用

Science China materials 2023年第11期66卷 4517-4518页

作者： Chaolin Tan Ji Zou Zhengyi Fu Singapore Institute of Manufacturing Technology(SIMTech) Agency for ScienceTechnology and Research(A*STAR)Singapore 636732Singapore State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

Additive manufacturing(AM),also called three-dimensional(3D)printing,offers disruptive design freedom and manufacturing flexibility due to the layer-wise incremental formation manner of *** in AM techniques provide unique advantages and feasibilities for overcoming challenges arising from fabricating parts with complexities in geometry,materials,and properties.

关键词： printing properties freedom

来源：评论

学校读者我要写书评

暂无评论

In situ generated layered NiFe-LDH/MOF heterostructure nanosheet arrays with abundant defects for efficient alkaline and seawater oxidation

引用

Nano Research 2023年第7期16卷 8945-8952页

作者： Manjie Xiao Can Wu Jiawei Zhu Chengtian Zhang Yan Li Jiahui Lyu Weihao Zeng Haiwen Li Lei Chen Shichun Mu State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Foshan Xianhu Laboratory Foshan 528200China Science and Technology Institute of Advanced Technology Wuhan 430051China Hefei General Machinery Research Institute Hefei 230031China

As the main limiting step of overall water splitting,oxygen evolution reaction(OER)is urgent to be enhanced by developing efficient catalysts to promote the process of electrolytic *** on theoretical analysis,the Ni-metal-organic framework(Ni-MOF)and NiFe-layered double hydroxide(NiFe-LDH)(NiFe-LDH/MOF)heterostructure can optimize the energy barrier of the OER process and decrease the adsorption energy of oxygen-containing intermediates,effectively accelerating the OER ***,layered NiFe-LDH/MOF heterostructures are in situ constructed through a facile two-step reaction process,with substantial oxygen defects and lattice defects that further improve the catalytic *** a result,only 208 and 275 mV OER overpotentials are needed for NiFe-LDH/MOF to drive the current densities of 20 and 100 mA·cm^(-2)in 1 M KOH solutions,and even maintain catalytic stability of 100 h at 20 mA·cm^(-2).When applied to seawater oxidation,only 235 and 307 mV OER overpotentials are required to achieve the current densities of 20 and 100 mA·cm^(-2),respectively,with almost no attenuation for 100 h stability test at 20 mA·cm^(-2),all better than commercial RuO_(2).This work provides the theoretical and experimental basis and a new idea for efficiently driving fresh water and seawater cracking by heterostructure and defect coupling design toward catalysts.

关键词： oxygen evolution reaction defects seawater electrolysis catalyst

来源：评论

学校读者我要写书评

暂无评论

Mg-gallate metal-organic framework-based sprayable hydrogel for continuously regulating oxidative stress microenvironment and promoting neurovascular network reconstruction in diabetic wounds

引用

Bioactive materials 2024年第8期38卷 181-194页

作者： Chenxi Lian Jiawei Liu Wenying Wei Xiaopei Wu Takashi Goto Haiwen Li Rong Tu Honglian Dai State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan430070China National Energy Key Laboratory for New Hydrogen-ammonia Energy Technologies FoshanXianhu LaboratoryFoshan528200China Chaozhou Branch of Chemistry and Chemical Engineering Guangdong Laboratory Chaozhou 521000China

Chronic diabetic wounds are the most common complication for diabetic *** to high oxidative stress levels affecting the entire healing process,treating diabetic wounds remains a ***,we present a strategy for continuously regulating oxidative stress microenvironment by the catalyst-like magnesium-gallate metal-organic framework(Mg-GA MOF)and developing sprayable hydrogel dressing with sodium alginate/chitosan quaternary ammonium salts to treat diabetic *** quaternary ammonium salts with antibacterial properties can prevent bacterial *** continuous release of gallic acid(GA)effectively eliminates reactive oxygen species(ROS),reduces oxidative stress,and accelerates the polarization of M1-type macrophages to M2-type,shortening the transition between inflammation and proliferative phase and maintaining redox ***,magnesium ions adjuvant therapy promotes vascular regeneration and neuronal formation by activating the expression of vascular-associated *** hydrogel dressings with antibacterial,antioxidant,and inflammatory regulation rapidly repair diabetic wounds by promoting neurovascular network reconstruction and accelerating re-epithelialization and collagen *** study confirms the feasibility of catalyst-like MOF-contained sprayable hydrogel to regulate the microenvironment continuously and provides guidance for developing the next generation of non-drug diabetes dressings.

关键词： Chronic diabetic wounds Bioactive MOF Antioxidant Anti-inflammation Enzymatic catalysis Neurovascular network reconstruction

来源：评论

学校读者我要写书评

暂无评论

Biocomposite silk fibroin hydrogel with stretchability,conductivity and biocompatibility for wireless strain sensor

引用

材料科学技术（英文版） 2025年第7期210卷 195-203页

作者： Rongjie Wang Qiaoyun Liu Jingjiang Wei Chenglong Zhu Yanze Wang Aixi Yu Weimin Wang Ji Zou Jingjing Xie Zhengyi Fu State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Hubei Longzhong Laboratory Xiangyang 441022China Department of Orthopedics Trauma and Microsurgery Zhongnan Hospital of Wuhan UniversityWuhan 430071China Institute for Advanced Materials Deformation and Damage from Multi-Scale Institute for Advanced StudyChengdu UniversityChengdu 610106China

As a natural biopolymer material,silk fibroin with unique mechanical properties can be used in the preparation of biocomposite hydrogels for strain ***,the electromechanical properties of bio-composite hydrogel strain sensors are still insufficient,such as the deterioration of electrical signals and low sensitivity,which need to develop a hydrogel with a stable transmission network for electric ***,a silk fibroin biocomposite hydrogel is prepared by incorporating tannic acid and MXene nanosheets into a polyacrylamide and silk fibroin double *** electromechanical properties of hydrogels are improved by optimizing the proportion of material *** a result,the double network structure and supramolecular interaction enhance the stretchability of hydrogels(692％fracture strain).The hydrogel also exhibits good biocompatibility and conductivity(0.85 S/m),which shows the application prospect in wearable *** wireless strain sensor assembled by this biocomposite hy-drogel presents good portability and sensing performance,such as high sensitivity(gauge factor=6.04),wide working range(500％strain),and outstanding stability(1000 cycles at 100％strain).The results in-dicate that the hydrogel strain sensor can be used to monitor human body *** biocomposite hydrogel is expected to be applied in the field of wearable strain sensors,and this study can provide a new way for the design of flexible electronic materials.

关键词： Hydrogel Stretchability Conductivity Wireless strain sensor

来源：评论

学校读者我要写书评

暂无评论

Metal-nitrogen-doped hybrid ionic/electronic conduction triple-phase interfaces for high-performance all-solid-state lithium-sulfur batteries

引用

Nano Research 2023年第8期16卷 10956-10965页

作者： Hao Li Jiangping Song Fanglin Wu Rui Wang Dan Liu Haolin Tang A State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Department of Chemistry School of ChemistryChemical Engineering and Life SciencesWuhan University of TechnologyWuhan 430070China

The point-to-point contact mechanism in all-solid-state Li-S batteries(ASSLSBs)is not as efficient as a liquid electrolyte which has superior mobility in the electrode,resulting in a slower reaction kinetics and inadequate ionic/electronic conduction network between the S(or Li_(2)S),conductive carbon,and solid-state electrolytes(SSEs)for achieving a swift(dis)charge ***,a series of hybrid ionic/electronic conduction triple-phase interfaces with transition metal and nitrogen co-doping were *** graphitic ordered mesoporous carbon frameworks(TM-N-OMCs;TM=Fe,Co,Ni,and Cu)serve as hosts for Li_(2)S and Li_(6)PS_(5)Cl(LPSC)and provide abundant reaction sites on the triple *** from both experimental and computational research display that the combination of Cu-N co-dopants can promote the Li-ion diffusion for rapid transformation of Li_(2)S with adequate ionic(6.73×10^(−4)S·cm^(−1))/electronic conductivities(1.77×10^(−2)S·cm^(−1))at 25℃.The as-acquired Li_(2)S/Cu-N-OMC/LPSC electrode exhibits a high reversible capacity(1147.7 mAh·g^(−1))at 0.1 C,excellent capacity retention(99.5%)after 500 cycles at 0.5 C,and high areal capacity(7.08 mAh·cm^(−2)).

关键词： all-solid-state lithium-sulfur batteries triple-phase interfaces ordered mesoporous carbons mixed ion/electron conductivities Li_(6)PS_(5)Cl solid electrolyte

来源：评论

学校读者我要写书评

暂无评论

Enhanced thermoelectric and mechanical properties of Bi_(0.5)Sb_(1.5)Te_(3) alloy with dispersed yttrium oxide ceramic nanoparticles

引用

Rare Metals 2024年第4期43卷 1758-1768页

作者： Cun-Cheng Li Ming-Wei Zhang Ji-Wu Xin Lei Wei Wen-Yu Zhao School of Materials Science and Engineering Shandong University of TechnologyZibo255000China School of Electrical and Electronic Engineering Nanyang Technological UniversitySingapore639798Singapore State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan430070China

Reducing thermal conductivity while avoiding adverse interfacial reactions during sintering is crucial for improving the thermoelectric performance of Bi_(2)Te_(3)based *** ceramic nanoparticles are good candidates for achieving this *** this study,we designed and prepared a series of p-type Bi_(0.5)Sb_(1.5)Te_(3)nanocomposites decorated with Y_(2)O_(3)ceramic nanoparticles via ball-milling dispersion and spark-plasma *** to the chemical stability of the ceramics,no traces of atomic doping or interfacial reactions were *** measurements revealed that the Y_(2)O_(3)nanoparticles distributed along the grain boundaries acted as energy-dependent carrier-filtering centers to improve the scattering parameter and Seebeck coefficient,contributing to the elevated power factor even with a decreased electrical ***,the incorporated Y_(2)O_(3)nanoparticles and various defect structures they induced effectively strengthened the phonon scattering and suppressed the lattice thermal ***,a peak figure of merit(ZT)of 1.23 at 313 K was achieved for 0.4%Y_(2)O_(3)/Bi_(0.5)Sb_(1.5)Te_(3),which is 13%higher than that of the *** addition,the Vickers hardness of the composite material was 35%higher than that of the *** study demonstrates the effectiveness of ceramic nanoparticles in synergistic ally improving the thermoelectric and mechanical properties,which may be further extended to other thermoelectric systems.

关键词： Bi_(0.5)Sb_(1.5)Te_3 alloy Y_(2)O_(3) ceramic nanoparticles Microstructures Thermoelectric performance Mechanical properties

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：