WC- 10Co nanocomposite powder produced by spray pyrolysis-continuoas reduction and carbonization technology was used, and the vacuum sinteriag plus sinterhip process was cdopted to prepare ultrafine WCCo cemented carb...
详细信息
WC- 10Co nanocomposite powder produced by spray pyrolysis-continuoas reduction and carbonization technology was used, and the vacuum sinteriag plus sinterhip process was cdopted to prepare ultrafine WCCo cemented carbide. The microstructure, grain size, porosity, density, Rockwell A hardness （ HRA ）, transverse rupture strength （ TRS ） , saturated magnetization and coercivity force were studied. The experimental results show that average grain size of the sample prepared by vacuum sintering plas sinterhip technology was about 420 nm, transverse rupture strength was more than 3460 MPa, and Rockwell A hardness of sintered specimen was more than 92.5. Ultrafine WC- 10Co cemented carbide with high strength and high hardness is obtained.
Yttrium-filled sku, tterudites Yy Fex Co4-x Sb12 （ Y =0- 0. 40 ） were synthesized. The effect of Y filling fraction on thermoelectric properties of Yy Fex Co4-x Sb12 was investigated. All samples showed p-type condu...
详细信息
Yttrium-filled sku, tterudites Yy Fex Co4-x Sb12
（ Y =0- 0. 40 ） were synthesized. The effect of Y filling fraction on thermoelectric properties of Yy Fex Co4-x Sb12
was investigated. All samples showed p-type conduct. The electrical conductivity decreased with increasing filling fraction y. The Seebeck coefficient inreased with increasing temperature. The lattice thermal conductivity decreased with increasing filling fraction y and showed the minimum value at a certain filling fraction y = 0.3. The effect of different filling atoms M（ M： Ba, Ce, Y） on the lattice thermal conductivity of MyFexCo4-xSb12 was discussed. The maximum ZT value of O. 7 was obtained for Y0.06 Fe0.7 Co3.3 Sb12 at 750 K.
The rods that were shaped from nanocrystalline WC- 10.21 Co-0.42 VC/ Cr3 C2 （ wt% ） composite powders by using powder extrusion molding （PEM） were investigated. The nanocrystalline WC- 10.21 Co- 0. 42 VC/ Cr3 C2 ...
详细信息
The rods that were shaped from nanocrystalline WC- 10.21 Co-0.42 VC/ Cr3 C2 （ wt% ） composite powders by using powder extrusion molding （PEM） were investigated. The nanocrystalline WC- 10.21 Co- 0. 42 VC/ Cr3 C2 （ wt% ） composite powders were prepared by the spray thermal decomposition-continuous reduction and carburization technology. In order to improve the properties of rods shaped by using powder extrusion molding, the cold isostatic pressing （CIP） technology was used before or after debinding. Specimens were siutered by vacuum siutering and hot isostatic pressing （HIP）. The density, Rockwell A hardness, magnetic coercivity , and magnetic saturation induction of siutered specimen were measured. The microstructure of the green bodies and the siutered specimens was studied by scanning electron microscopy （SEM）. Results show that the rod formed by using powder extrusion molding after debinding and followed by cold isostatic pressing can be siutered to 99.5% density of composite cemented carbide rods with an average grain size of about 200- 300 nm, magnetic coercivity of 30.4 KA / m, Rockwell A hardness of 92.6 and magnetic saturation induction of 85% . Superfine WC- 10 Co cemented carbide rods with excellent properties were obtained.
Both silica and boron-silica glass materials doped with terbium organic complex were prepared by in situ sol-gel method respectively. XRD and SEM measurements were performed to verify the non-crystalline structure of ...
详细信息
Both silica and boron-silica glass materials doped with terbium organic complex were prepared by in situ sol-gel method respectively. XRD and SEM measurements were performed to verify the non-crystalline structure of the glass. The influence of the glass contents on the structure of the glass and the erwrgy level of the doped Tb （Ⅲ） ions was analyzed by the emission spectra and IR spectra. The effect of B2O3 on the photolumirwscence properties of rare earth organic complex in silica- based glass was investigated. The IR spectra indicate that the in situ sylthesized rare earth complex molecule was confined to the micropores of the bost and the vibration of the ligands was frozen. When B2O3 was added into the silica host gel, B2O3 had little influence on the noncrystallirw structure of the glass, and BO3 triangle, which had a layer structure different from the silica framework, could form. So the silica network became more inhomogenous, and the luminescence of terbium complexes was quenched with the increase of the B2O23 amount.
SiCp/ Al composites containing high volume fraction of SiC particles were fabricated by spark plasma sintering （SPS）. and their thermophysical properties, such as thermal conductivity （TC） and *** of thermal expan...
详细信息
SiCp/ Al composites containing high volume fraction of SiC particles were fabricated by spark plasma sintering （SPS）. and their thermophysical properties, such as thermal conductivity （TC） and *** of thermal expansion （CTE）, were characterized. The electric field in the vacuum column was calculated and the generation condition of the spark was analyzed. Spark can be generated by a low current if the cavity in the green body is large enough. A high relative density of the composites was successfully achieved through the optimization of sintering parameters. The measured TCs of the SiCp/ Al composites fabricated by SPS are higher than 195 W/m ·K.
Pulse current heating (PCH) was used to join Ti-6Al-4V alloy at two cases of with die and without die. Hot-pressing (HP) method was used to provide a comparison between the two methods. Microstructures near the contac...
详细信息
Pulse current heating (PCH) was used to join Ti-6Al-4V alloy at two cases of with die and without die. Hot-pressing (HP) method was used to provide a comparison between the two methods. Microstructures near the contacting surfaces were observed in optical microscope. Temperature distribution was analyzed. After joining, the tensile properties of the samples were evaluated. Experimental results show that grains and phases grow transversely on contacting surfaces, which makes two parts into a whole with a certain of tensile strength. PCH joining is a different temperature joining method. The highest temperature is located at the interface. The comparison of tensile strengths of samples joined by the two methods indicates that joining temperature and holding time needed by PCH are lower and less than those needed for HP.
Rhizama Chuanxiong is a kind of traditional medicinal herb used to promote blood circulation and eliminate wind to relieve pain. In this work, nano Rhizoma Chuanxiong particles were successfully prepared by high speed...
详细信息
Rhizama Chuanxiong is a kind of traditional medicinal herb used to promote blood circulation and eliminate wind to relieve pain. In this work, nano Rhizoma Chuanxiong particles were successfully prepared by high speed centrifugal sheering (HSCS) pulverizer. The influence of processing parameters on the size of Rhizama Chuanxiong particles and the different properties between nano Rhizoma Chuanxiong particles and original fine powder were systematically studied by ZetaPALS light scattering granulometric analyzer and optical microscope. The content of effective ingredient tetramethylpyrazine (TMP) was determined by high-performance liquid chromatography (HPLC). The results illustrate that general Rhizama Chuanxiong powder can be ultrafinely ground to nanometer within 50 min, and the cellular tissues of Rhizoma Chuanxiong are broken into pieces and dispersed stably and homogeneously after being ultrafinely ground. In addition, the active ingredients can dissolve out directly and fully, and the extraction ratio of TMP is increased 32.2% by HSCS processing.
Samples of LiNi0.95-xCoxAl0.05O2 （x = 0.10 and 0.15） and LiNiO2, synthesized by the solid-state reaction at 725℃ for 24 h from LiOH-H2O, Ni2O3, Co2O3, and AI（OH）3 under an oxygen stream, were characterized by TG-...
详细信息
Samples of LiNi0.95-xCoxAl0.05O2 （x = 0.10 and 0.15） and LiNiO2, synthesized by the solid-state reaction at 725℃ for 24 h from LiOH-H2O, Ni2O3, Co2O3, and AI（OH）3 under an oxygen stream, were characterized by TG-DTA, XRD, SEM, and electrochemical tests. Simultaneous doping of cobalt and aluminum at the Ni-site in LiNiO2 was tried to improve the cathode performance for lithium-ion batteries. The results showed that co-doping （especially, 5 at.% A1 and 10 at.% Co） definitely had a large beneficial effect in increasing the capacity （186.2 mA.h/g of the first discharge capacity for LiNio.s.42OoaoAlo.0502） and cycling behavior （180.1 mA-h/g after 10 cycles for ***2） compared with 180.7 mA.h/g of the first discharge capacity and 157.7 mA.h/g of the tenth discharge capacity for LiNiO2, respectively. Differen- tial capacity versus voltage curves showed that the co-doped LiNio.95_***2 had less intensity of the phase transitions than the pristine LiNiO2.
A systematic research was performed about diffusion kinetics of adsorbing F^- dissolved in water for carbonate hydroxyapatite （CHAP） from the natural hydroxyapatite which was modified by adulterating with CO3^2-. Th...
详细信息
A systematic research was performed about diffusion kinetics of adsorbing F^- dissolved in water for carbonate hydroxyapatite （CHAP） from the natural hydroxyapatite which was modified by adulterating with CO3^2-. The result shows that the speed of F^- adsorption is controlled by membrane diffusion when F^- concentration is relatively low, which is expressed by the kinetic equation of diffusion Q=0.0005（Ci-C）（t-ti）＋0.3967, or by vacancy diffusion when F^- concentration is relatively high, which is expressed by the kinetic equation of diffusion In[C（o, t）]=8.4718-0.5048Int. Based on the feature of CHAP for adsorbing F^- dissolved in water and its special channel of the structure of CO3^3- modified hydroxyapatite, models of vacancy diffusion and membrane diffusion were established.
Novel ordered mesoporous Eu(DBM)3phen/APTES-SBA-15 (EAS) composites with reasonable photoluminescence property and interesting morphology of bundles of pearl-like chains were synthesized. The characteristics of the me...
详细信息
Novel ordered mesoporous Eu(DBM)3phen/APTES-SBA-15 (EAS) composites with reasonable photoluminescence property and interesting morphology of bundles of pearl-like chains were synthesized. The characteristics of the mesostructure and the optical properties of the prepared samples were investigated by means of XRD, FTIR, SEM, TEM, N2 adsorption–desorption and PL spectroscopy. The results indicate that the as-made EAS composites have long-distance ordered mesoporous structure. Compared with the Eu(DBM)3phen complex, it is found that the EAS composites perform a considerable photoluminescence with good color purity. It is proposed that the anchored amine from the APTES and quantum size effect of the Eu(DBM)3phen complex have great effect on the photoluminescence of the EAS composites.
暂无评论