检索结果-内蒙古大学图书馆

Metal-nitrogen-doped hybrid ionic/electronic conduction triple-phase interfaces for high-performance all-solid-state lithium-sulfur batteries

引用

Nano Research 2023年第8期16卷 10956-10965页

作者： Hao Li Jiangping Song Fanglin Wu Rui Wang Dan Liu Haolin Tang A State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Department of Chemistry School of ChemistryChemical Engineering and Life SciencesWuhan University of TechnologyWuhan 430070China

The point-to-point contact mechanism in all-solid-state Li-S batteries(ASSLSBs)is not as efficient as a liquid electrolyte which has superior mobility in the electrode,resulting in a slower reaction kinetics and inadequate ionic/electronic conduction network between the S(or Li_(2)S),conductive carbon,and solid-state electrolytes(SSEs)for achieving a swift(dis)charge ***,a series of hybrid ionic/electronic conduction triple-phase interfaces with transition metal and nitrogen co-doping were *** graphitic ordered mesoporous carbon frameworks(TM-N-OMCs;TM=Fe,Co,Ni,and Cu)serve as hosts for Li_(2)S and Li_(6)PS_(5)Cl(LPSC)and provide abundant reaction sites on the triple *** from both experimental and computational research display that the combination of Cu-N co-dopants can promote the Li-ion diffusion for rapid transformation of Li_(2)S with adequate ionic(6.73×10^(−4)S·cm^(−1))/electronic conductivities(1.77×10^(−2)S·cm^(−1))at 25℃.The as-acquired Li_(2)S/Cu-N-OMC/LPSC electrode exhibits a high reversible capacity(1147.7 mAh·g^(−1))at 0.1 C,excellent capacity retention(99.5%)after 500 cycles at 0.5 C,and high areal capacity(7.08 mAh·cm^(−2)).

关键词： all-solid-state lithium-sulfur batteries triple-phase interfaces ordered mesoporous carbons mixed ion/electron conductivities Li_(6)PS_(5)Cl solid electrolyte

来源：评论

学校读者我要写书评

暂无评论

Recent advances in protective technologies against copper corrosion

引用

Journal of materials Science & technology 2024年第34期201卷 75-94页

作者： Xiaomeng She Jian Peng Yujie Qiang Yue Zhou Song Zhang State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology122 Luoshi RoadWuhan 430070China National Center for Materials Service Safety University of Science and Technology BeijingBeijing 100083China School of Chemistry Chemical Engineering and Life ScienceWuhan University of TechnologyWuhan 430070China

Copper,one of the most frequently utilized non-ferrous metals,finds extensive applications in the elec-trical industry,mechanical engineering,construction industry,and arm ***-term exposure to corrosive environments including moisture,sulfur,chlorine,and microbes induces corrosion,a signifi-cant factor contributing to material ***,numerous scientific endeavors have been directed towards the prevention of copper ***,coating copper with innovative materials like graphene,boron nitride,and various conductive polymers has proven effective in thwarting ***,the introduction of new organic compounds,including azole derivatives,amino acids,and N-heterocyclic carbenes,has bolstered the eco-friendliness and efficiency of corrosion inhibitors and molecular passivation ***,these approaches have been extensively investigated for their efficacy in antioxidation of copper *** study provides a comprehensive review of the latest advancements in protective technologies,such as anti-corrosion coatings,corrosion inhibitors,and molecular passivation layers,aimed at countering copper corrosion under aggressive conditions.

关键词： Copper corrosion Coating Corrosion inhibitor Molecular passivation

来源：评论

学校读者我要写书评

暂无评论

Continuous production of Cl-terminated MXenes by bubbling chemical vapor growth in molten salt

引用

materials Today 2025年 86卷 1-9页

作者： Zhang, Jikai Tao, Yi Ye, Yuxuan Wang, Haiyang Wu, Xinping Luo, Zicheng Shi, Yu Zhao, Qi Cheng, Zongju Guo, Yu Li, Bin Mai, Bo An, Qinyou Zhang, Xiansheng Du, Zhiguo Yang, Shubin School of Materials Science and Engineering Beihang University Beijing100191 China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology Wuhan430070 China College of Textiles and Clothing Qingdao University Qingdao266071 China

Although 2D transition-metal carbides (MXenes) are usually synthesized by selective etching and chemical vapor deposition approaches, they are limited by the slow reaction kinetics, resulting in their continuous production challenging. Here, we demonstrate a bubbling chemical vapor growth (BCVG) method to continuously produce Cl-terminated MXenes by the reaction of CH4 and TiCl4 chemical bubbles with titanium powder in a molten salt. In the molten reaction system, titanium powder would effectively react with TiCl4 to form highly active [TiCl6]y– with low Ti[sbnd]Cl bond dissociation energies. The multivalent [TiCl6]y– could efficiently incorporate the carbon species from CH4 to form [Ti6CCl18] clusters on the surface of bubbles in a low energy barrier, efficiently promoting the reaction kinetics. Subsequently, Cl-terminated MXenes were produced based on the following condensation reaction of [Ti6CCl18] clusters. The resultant MXene (Ti2CClx) exhibits an expanded structure with strong interfacial polarization between its basal planes and the polymer matrix, delivering a good electromagnetic wave absorption performance with a minimum reflection loss (RLmin) value of –52.2 dB at a thin thickness of 2.84 mm. © 2025 Elsevier Ltd

关键词： Condensation reactions

来源：评论

学校读者我要写书评

暂无评论

Accelerated reconstruction of ZIF-67 with significantly enhanced glucose detection sensitivity

引用

Nano Research 2024年第6期17卷 4737-4743页

作者： Huihui Jin Weihao Zeng Wei Qian Lun Li Pengxia Ji Zhengying Li Daping He School of Information Engineering Wuhan University of TechnologyWuhan 430070China Hubei Engineering Research Center of RF-Microwave Technology and Application Wuhan University of TechnologyWuhan 430070China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

Research on metal-organic framework(MOF)-based non-enzymatic glucose sensors usually ignores the impact of the surface reconstruction degree of MOF on the activity of catalyzing glucose *** this work,we choose zeolitic imidazolate framework-67(ZIF-67),which is commonly used in glucose sensing,as a representative to investigate the influence of reconstruction degree on its structure and glucose catalytic *** employing the electrochemical activation strategy,the activity of ZIF-67 in catalyzing glucose gradually increased with the prolongation of the activation time,reaching the optimum after 2 h *** detection sensitivity of the activated ZIF-67 was 19 times higher than that of the initial ZIF-67,and the limit of detection(LOD)was lowered from 7 to 0.4μ*** findings demonstrate that the oxidation degree of ZIF-67 deepened rapidly with continuously activation and was basically reconstructed to CoOOH after 2 h activation,accompanied by a morphological change from cuboctahedral to ***,theoretical investigation revealed that ZIF-67 is not suitable as a stable glucose sensor electrode since the adsorbed glucose molecules hasten the dissociation of ligands and the breaking of Co-N bond in ***,our work has important implications for the rational design of next-generation MOF-based glucose sensors.

关键词： zeolitic imidazolate framework-67(ZIF-67) glucose oxidation electrochemical activation reconstruction CoOOH

来源：评论

学校读者我要写书评

暂无评论

Synergistic Coupling of Sulfide Electrolyte and Integrated 3D FeS_(2)Electrode Toward Long-Cycling All-Solid-state Lithium Batteries

引用

Energy & Environmental materials 2024年第5期7卷 68-76页

作者： Wenyi Liu Yongzhi Zhao Chengjun Yi Weifei Hu Jiale Xia Yuanyuan Li Jinping Liu State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China School of Chemistry Chemical Engineering and Life ScienceWuhan University of TechnologyWuhan 430070China School of Integrated Circuits Huazhong University of Science and TechnologyWuhan 430074China

FeS_(2)cathode is promising for all-solid-state lithium batteries due to its ultra-high capacity,low cost,and environmental ***,the poor performances,induced by limited electrode-electrolyte interface,severe volume expansion,and polysulfide shuttle,hinder the application of FeS_(2)in all-solid-state lithium ***,an integrated 3D FeS_(2)electrode with full infiltration of Li6PS5Cl sulfide electrolytes is designed to address these *** a 3D integrated design not only achieves intimate and maximized interfacial contact between electrode and sulfide electrolytes,but also effectively buffers the inner volume change of FeS_(2)and completely eliminates the polysulfide shuttle through direct solid-solid conversion of Li2S/***,the vertical 3D arrays guarantee direct electron transport channels and horizontally shortened ion diffusion paths,endowing the integrated electrode with a remarkably reduced interfacial impedance and enhanced reaction *** from these synergies,the integrated all-solid-state lithium battery exhibits the largest reversible capacity(667 mAh g^(-1)),best rate performance,and highest capacity retention of 82%over 500 cycles at 0.1 C compared to both a liquid battery and non-integrated all-solid-state lithium *** cycling performance is among the best reported for FeS_(2)-based all-solid-state lithium *** work presents an innovative synergistic strategy for designing long-cycling high-energy all-solid-state lithium batteries,which can be readily applied to other battery systems,such as lithium-sulfur batteries.

关键词： 3D electrolyte infiltration all-solid-state batteries FeS_(2)nanosheets arrays integrated 3D electrodes sulfide electrolytes

来源：评论

学校读者我要写书评

暂无评论

Structural and Luminescent Properties of Mg_(0.25-x)Al_(2.57)O_(3.79)N_(0.21):xMn^(2+)Green-Emitting Transparent Ceramic Phosphor

引用

Journal of Wuhan University of technology(materials Science) 2024年第3期39卷 533-540页

作者：郝留成 MIAO Xiaojun LI Kai ZHONG Jianying 涂兵田 YANG Zhangfu 王皓 Pinggao Group Co. LtdPingdingshan 467001China State Key Lab of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Hubei Longzhong Laboratory Xiangyang 430070China School of Materials Science and Engineering Anhui University of Science and TechnologyHuainan 232001China

A series of spinel-type Mg_(0.25-x)Al_(2.57)O_(3.79)N_(0.21):xMn^(2+)(MgAlON:xMn^(2+))phosphors were synthesized by the solid-state reaction *** transparent ceramic phosphors were fabricated by pressureless sintering followed by hot-isostatic pressing(HIP).The crystal structure,luminescence and mechanical properties of the samples were systematically *** transparent ceramic phosphors with tetrahedrally coordinated Mn^(2+)show strong green emission centered around 515 nm under blue light *** the Mn^(2+)concentration increases,the crystal lattice expands slightly,resulting in a variation of crystal field and a slight red-shift of green emission *** weak absorption peaks in the transmittance spectra originate from the spin-forbidden ^(4)T_(1)(^(4)G)→^(6)A_(1) transition of Mn^(2+).The decay time was found to decrease from 5.66 to 5.16 ms with the Mn^(2+)*** present study contributes to the systematic understanding of crystal structure and properties of MgAlON:xMn^(2+)green-emitting transparent ceramic phosphor which has a potential application in high-power light-emitting diodes.

关键词： transparent ceramic phosphor green emission MgAlON photoluminescence

来源：评论

学校读者我要写书评

暂无评论

Thermal Stability and Electrochemical Properties of Separators for Lithium-ion Batteries

引用

Journal of Wuhan University of technology(materials Science) 2023年第6期38卷 1231-1241页

作者： YI Guangyuan XU Caiyun LIU Wan QU Deyu WANG Hongbing TANG Haolin State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Department of Chemistry Wuhan University of TechnologyWuhan 430070China Wuhan Huiqiang New Energy Materials Technology Co. LtdWuhan 430070China

The mechanical properties,contact angle,thermomechanical and electrochemical properties of PE,PVDF,and ceramic separators were *** experimental results show that the PE separator has the largest porosity,the PVDF separator has the best mechanical properties,wettability,and heat *** kinds of separators were assembled into lithium-ion batteries for electrochemical *** them,the PE separator has the best rate performance,and the ceramic separator has poor performance in charge-discharge *** the same time,the PE and ceramic separators were tested with different amounts of electrolytes at room temperature and a high temperature,and it is found that the capacity of the PE separator is higher at room temperature,while the performance of the ceramic separator is better at a high *** amount of electrolyte also has a certain influence on its electrochemical performance.

关键词： lithium-ion battery separator tensile strength electrochemical performance

来源：评论

学校读者我要写书评

暂无评论

ZnIn_(2)S_(4)/MOF S-scheme photocatalyst for H_(2)production and its femtosecond transient absorption mechanism

引用

Journal of materials Science & technology 2024年第30期197卷 183-193页

作者： Jiajie Cai Bowen Liu Shumin Zhang Linxi Wang Zhen Wu Jianjun Zhang Bei Cheng State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Hunan Key Laboratory of Applied Environmental Photocatalysis Changsha UniversityChangsha 410022China Laboratory of Solar Fuel Faculty of Materials Science and ChemistryChina University of Geosciences68 Jincheng StreetWuhan 430078China Department of Chemical Engineering Ordos Institute of TechnologyOrdos 017000China

Photocatalytic water splitting is a popular pathway for H_(2)evolution,but the slow water oxidation greatly hampers the overall *** harness photogenerated holes in an efficient and lucrative way,the wa-ter oxidation reaction is replaced by selective oxidation of organic compounds to achieve simultaneous production of H_(2)and value-added ***,an alternative tactic is reported where an organic compound(benzylamine,BA)not only serves as the precursor for N-benzylidene-benzylamine(NBBA)production but also provides hydrogen sources for H_(2)evolution,achieving the goal under anhydrous *** process is realized using an S-scheme photocatalyst composed of ZnIn_(2)S_(4)and the UiO-66-NH_(2)(U6N)metal-organic framework(MOF).The S-scheme carrier transfer mechanism was validated by in-situ irradiated X-ray photoelectron spectroscopy(ISI-XPS)and femtosecond transient absorption(fs-TA)*** increased carrier efficiency and reinforced redox power endowed by the S-scheme heterojunction,the composite performed better than ZnIn2 S4 and *** performance was further ameliorated by Pt-cocatalyst modification,achieving an H_(2)production rate of 5275μmol h^(-1)g^(-1)as well as BA conversion of 94.3%with 99.3%NBBA *** studies reveal that BA is ini-tially oxidized to carbon-centered radicals and further to imines along with the release of *** imine reacts with another BA molecule to form NBBA,while the protons are reduced to H_(2).This work provides new insights into concurrent photocatalytic H_(2)production and selective organic oxidation from organic amines using S-scheme photocatalysts.

关键词： Photocatalysis S-scheme heterojunction Hydrogen production Selective oxidation Benzylamine Femtosecond transient absorption

来源：评论

学校读者我要写书评

暂无评论

synthesis Approach and Adsorption Properties of SiOC Nanocomposite by Chitin Templating

引用

Journal of Wuhan University of technology(materials Science) 2022年第6期37卷 1041-1047页

作者： HUANG Yaoxuan PING Hang WANG Kun FU Zhengyi State Key Laboratory of Silicate Materials for Architectures Wuhan University of TechnologyWuhan 430070China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

Using chitin as the templating material,we obtained layered nanocomposites like shrimp or crab shells via a sol-gel self-assembly *** images show a layered structure and XRD patterns present a typical peak of chitin,which indicates the templating role of chitin in the as-received hybrid ***,the layer spacing of chitin/silica hybrid materials is reduced with increasing content of *** the heat treatment for carbonization,layered SiOC nanocomposites with mesoporous structures were obtained and showed good dye adsorption *** present study demonstrates a reliable and self-assembly synthesis technique for the development of advanced high-performance nanocomposites with biomimetic nanostructures.

关键词： chitin sol-gel method self-assembly biomimetic structure SiOC nanocomposite

来源：评论

学校读者我要写书评

暂无评论

The Shock Response and Spall Mechanism of Mg-Al-Zn Alloy:Molecular Dynamics Study

引用

Acta Mechanica Solida Sinica 2022年第3期35卷 495-503页

作者： Xiaoyue Yang Shuang Xu Lisheng Liu Hubei Key Laboratory of Theory and Application of Advanced Materials Mechanics Wuhan University of TechnologyWuhan 430070China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

Shock responses of Mg-Al-Zn alloy are investigated by the molecular dynamics(MD)*** wave propagation,plastic deformation behavior and failure mechanism along the[0001]and[1010]orientations are *** both orientations,simulation results show that the shock wave has an obvious double-wave structure(plastic-elastic)under a piston velocity of 1200 m/s.A higher Hugoniot elastic limit(HEL)is observed for[0001]-oriented *** the shock pressure is along the[1010]direction,the distance between plastic and elastic waves is closer,and higher dislocation density and more twins are ***,the spall strength for[1010]-oriented shock is predicted to be *** addition,the wave interactions,HEL and spall strength predicted for Mg-Al-Zn alloy are compared with the experimental results and MD simulation results of Mg single crystal in the *** is concluded that the shock performance of Mg-Al-Zn is better than that of Mg single crystal.

关键词： Mg-Al-Zn Shock compression Molecular dynamics Hugoniot elastic limit Spall strength

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：