检索结果-内蒙古大学图书馆

Interfacial reaction behavior and mechanical properties of 5A06 Al alloy soldered with Sn-1Ti-xGa solders at a low temperature

引用

China Welding 2023年第2期32卷 23-31页

作者：宋立志肖勇奚邦富李佳琪张建 School of Materials Science and Engineering Wuhan University of TechnologyWuhan 430070China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

Active soldering of 5A06 Al alloy was performed at 300 ℃ by using Sn-1Ti and Sn-1Ti-0.3Ga active solders, respectively. Theeffects of soldering time on the microstructure and mechanical properties of the joints were investigated. The results showed that the Sn-1Tisolder broke the oxide film on the surface of the Al substrate and induced intergranular diffusion in the Al substrate. When Ga was added tothe solder, severe dissolution pits appeared in the Al substrate due to the action of Sn-1Ti-0.3Ga solder, and many Al particles were flakedfrom the matrix into the solder seam. Under thermal stress and the Ti adsorption effect, the oxide film cracked. With increasing solderingtime, the shear strength of 5A06 Al alloy joints soldered with Sn-1Ti and Sn-1Ti-0.3Ga active solders increased. When soldered for 90 min,the joint soldered with Sn-1Ti-0.3Ga solder had a higher shear strength of 22.12 MPa when compared to Sn-1Ti solder.

关键词： 5A06-Al alloy Sn-Ti-Ga solder low-temperature soldering interfacial reaction mechanical properties

来源：评论

学校读者我要写书评

暂无评论

Interfacial and Vacancies Engineering of Copper Nickel Sulfide for Enhanced Oxygen Reduction and Alcohols Oxidation Activity

引用

Energy & Environmental materials 2023年第5期6卷 288-298页

作者： Zhaoyang Wang Xiaobin Liao Min Zhou Fuzhi Huang Kwadwo Asare Owusu Jiantao Li Zifeng Lin Qi Sun Xufeng Hong Congli Sun Yibing Cheng Yan Zhao Liqiang Mai State Key Laboratory of Silicate Materials for Architectures International School of Materials Science and Engineering Wuhan University of TechnologyNo.122 Luoshi RoadWuhan 430070China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China The Institute of Technological Sciences Wuhan UniversityWuhan 430072China Department of Materials Science and Engineering Monash UniversityClayton Victoria 3800Australia Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory Xianhu hydrogen ValleyFoshan 528216China

Rational design and construction of highly efficient nonprecious electrocatalysts for oxygen reduction and alcohols oxidation reactions(ORR,AOR)are extremely vital for the development of direct oxidation alkaline fuel cells,metal-air batteries,and water electrolysis system involving hydrogen and value-added organic products generation,but they remain a great ***,a bifunctional electrocatalyst is prepared by anchoring CuS/NiS_(2)nanoparticles with abundant heterointerfaces and sulfur vacancies on graphene(Cu_(1)Ni_(2)-S/G)for ORR and *** from the synergistic effects between strong interfacial coupling and regulation of the sulfur vacancies,Cu_(1)Ni_(2)-S/G achieves dramatically enhanced ORR activity with long term ***,when ethanol is utilized as an oxidant for AOR,an ultralow potential(1.37 V)at a current density of 10 mA cm-2 is achieved,simultaneously delivering a high Faradaic efficiency of 96%for ethyl acetate ***_(1)Ni_(2)-S/G also exhibits catalytic activity for other alcohols electrooxidation process,indicating its *** work not only highlights a viable strategy for tailoring catalytic activity through the synergetic combination of interfacial and vacancies engineering,but also opens up new avenues for the construction of a self-driven biomass electrocatalysis system for the generation of value-added organic products and hydrogen under ambient conditions.

关键词： alcohols oxidation reaction heterointerface metal sulfide oxygen reduction reaction sulfur vacancies

来源：评论

学校读者我要写书评

暂无评论

Improvement of AlN Thermal Conductivity Based on Reductive Compound Additives

引用

Journal of Wuhan University of technology(materials Science) 2023年第5期38卷 1025-1033页

作者： LI Meijuan WANG Chuanyi WANG Gaoqiang WANG Chuanbin SHEN Qiang State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China School of Chemistry Chemical Engineering and Life SciencesWuhan University of TechnologyWuhan 430070China Nanchong Three-circle Electronics Co.LTD. Nanchong 637100China

AlN ceramics were prepared by plasma activation sintering(PAS)with compound additives yttrium acetylacetonate(Y(acac)_(3))and melamine(C_(3)H_(6)N_(6)).The effects of compound additives on the microstructure,density,and thermal properties of Al N ceramic were studied.Y(acac)3and C_(3)H_(6)N_(6)can form Y_(2)O_(3),residual organic carbon and reducing gas during the heating process,which improves the Al N sintering performance at a temperature of 1700℃and the bulk thermal *** the content of Y(acac)_(3)is 10 wt%and C_(3)H_(6)N_(6)is 3 wt%,the thermal conductivity of Al N ceramics is 105.6 W/(m·K),which is much higher than that of Al N ceramics with Y_(2)O_(3)under the same sintering *** work provides theoretical reference for the preparation of high-performance Al N ceramic.

关键词： reductive compound additives AlN ceramic thermal conductivity:plasma activated sintering

来源：评论

学校读者我要写书评

暂无评论

Preparation and Thermal Stability of AlMoON Based Solar Selective Absorption Coating

引用

Journal of Wuhan University of technology(materials Science) 2024年第4期39卷 854-862页

作者：闵捷 YUAN Wenxu CHEN Yufei LAN Yapeng YAN Mengdi LIU Hanze CHENG Xudong 代路 Hubei Provincial Key Laboratory of Green Materials for Light Industry Hubei University of TechnologyWuhan 430068China Col-laborative Innovation Center of Green Light-weight Materials and Processing Hubei University of TechnologyWuhan 430068China School of Materials and Chemical Engineering Hubei University of TechnologyWuhan 430068China School of Industrial Design Hu-bei University of TechnologyWuhan 430068China State Key Laboratory of Advanced Technology for Materials Synthesis and Process-ing Wuhan University of TechnologyWuhan 430070China Science and Technology on Thermal Energy and Power Laboratory Wuhan Second Ship Design&Research InstituteWuhan 430205China

AlMoON based solar selective absorption coatings were deposited on stainless steel substrate by magnetron *** coatings included infrared reflection layer Mo,absorption layer AlMoN,absorption layer AlMoON and antireflection layer AlMoO from bottom to *** surface of the deposited coatings is flat without obvious *** absorptivity and emissivity are 0.896 and 0.09,respectively,and the quality factor is *** heat treatment at 500℃-36 h,the surface roughness of the coating increases,a small number of cracks and other defects appear,and the broken part is still attached to the coating surface.A certain degree of element diffusion occurs in the coatings,resulting in the decline of the optical properties of the *** absorptivity and emissivity are 0.883 and 0.131,respectively,the quality factor is 7.06,and the PC value is *** coatings do not fail under this condition and have certain thermal stability.

关键词： AlMoON coating preparation thermal stability

来源：评论

学校读者我要写书评

暂无评论

Chiral effect on Aβ fibrillation from molecular-scale to nanoscale

引用

Nano Research 2022年第7期15卷 6721-6729页

作者： Guanbin Gao Guowei Zhu Liangchong Yu Zijun Zhang Ting Zhang Xinglin Liu Cheng Zhang Lin Zhou Taolei Sun State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China School of Chemistry Chemical Engineering and Life ScienceWuhan University of TechnologyWuhan 430070China

β-Amyloid(Aβ)peptide fibrillation,one of the characteristic hallmarks of Alzheimer’s disease,is determined by many interfacial physical-chemical factors,e.g.,charge,hydrophobicity,*** extensive research,chiral effect in different-scales on the fibrillation process of Aβremains ***,molecular-scale,sub-nanoscale,and nanoscale chiral-structures were constructed to investigate their chiral effect on the fibrillation of Aβ_(40) *** structures from molecular-scale to nanoscale were obtained from the different periods of the chemosynthesis process of chiral ZnS quantum-dots(QDs),confirmed by real-time monitoring of circular dichroism *** molecular-scale,both L-penicillamine(L-P)and D-P ligands accelerated the fibrillation of Aβ_(40),and the speed-up effect of D-P was slightly stronger than *** sub-nanoscale,both two chiral Zncomplexes(L-Zn and D-Zn)induced the agglomeration of Aβ_(40) without chirality *** nanoscale,both L-ZnS and DZnS QDs inhibited the fibrillation of Aβ_(40),and the inhibition effect of L-ZnS was notably better than that of ***-situ kinetics experiments of Aβ_(40) co-incubated with two chiral QDs demonstrated that L-ZnS completely prevents the misfolding of Aβ_(40) from unfolded toβ-sheet,while D-ZnS cannot achieve *** site-replacement experiments and simulation results revealed the underlying molecular mechanisms of the different inhibition efficiency of chiral ZnS QDs on Aβ_(40) fibrillation,which mainly attribute to the stereoselectivity interaction between the chiral ligands of ZnS QDs and electro-positive amino acid residues(R5,K16,and K28)of Aβ_(40).This work offers a microscopic insight of chiral effect on Aβfibrillation exerted by structures in different-scales,and provides a guidance in precise regulation of protein fibrillation via manipulating chiral structures in different-scales.

关键词： chirality molecular-scale sub-nanoscale nanoscale Aβ_(40) fibrillation

来源：评论

学校读者我要写书评

暂无评论

High-rate sodium-ion storage of vanadium nitride via surface-redox pseudocapacitance

引用

Interdisciplinary materials 2023年第3期2卷 434-442页

作者： Qiulong Wei Tingyi Huang Xiaojuan Huang Binhao Wang Yalong Jiang Dafu Tang Dong-Liang Peng Bruce Dunn Liqiang Mai Department of Materials Science and Engineering Fujian Key Laboratory of Surface and Interface Engineering for High Performance MaterialsCollege of MaterialsXiamen UniversityXiamenChina State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhanChina Department of Materials Science and Engineering University of California Los AngelesLos AngelesCaliforniaUSA

Vanadium nitride(VN)electrode displays high-rate,pseudocapacitive responses in aqueous electrolytes,however,it remains largely unclear in nonaqueous,Na+-based *** traditional view supposes a conversion-type mechanism for Na+storage in VN anodes but does not explain the phenomena of their size-dependent specific capacities and underlying causes of pseudocapacitive charge storage ***,we insightfully reveal the VN anode exhibits a surface-redox pseudocapacitive mechanism in nonaqueous,Na+-based electrolytes,as demonstrated by kinetics analysis,experimental observations,and first-principles *** ex situ X-ray photoelectron spectroscopy and semiquantitative analyses,the Na+storage is characterized by redox reactions occurring with the V5+/V4+to V3+at the surface of VN particles,which is different from the well-known conversion reaction *** pseudocapacitive performance is enhanced through nanoarchitecture design via oxidized vanadium states at the *** optimized VN-10 nm anode delivers a sodium-ion storage capability of 106 mAh g−1 at the high specific current of 20 A g−1,and excellent cycling performance of 5000 cycles with negligible capacity *** work demonstrates the emerging opportunities of utilizing pseudocapacitive charge storage for realizing high-rate sodium-ion storage applications.

关键词： high-rate capability pseudocapacitance sodium-ion storage vanadium nitride

来源：评论

学校读者我要写书评

暂无评论

Tailoring lithium intercalation pathway in 2D van der Waals heterostructure for high-speed edge-contacted floating-gate transistor and artificial synapses

引用

InfoMat 2024年第10期6卷 53-64页

作者： Jun Yu Jiawei Fu Hongcheng Ruan Han Wang Yimeng Yu Jinpeng Wang Yuhui He Jinsong Wu Fuwei Zhuge Ying Ma Tianyou Zhai State Key Laboratory of Materials Processing and Die and Mould Technology School of Material Science and EngineeringHuazhong University of Science and Technology(HUST)Wuhanthe People's Republic of China Hubei Yangtze Memory Laboratory School of Integrated CircuitsHuazhong University of Science and Technology(HUST)Wuhanthe People's Republic of China School of Information Engineering Zhongnan University of Economics and LawWuhanthe People's Republic of China State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Nanostructure Research CenterWuhan University of TechnologyWuhanthe People's Republic of China Optics Valley Laboratory Hubeithe People's Republic of China

Local phase transition in transition metal dichalcogenides (TMDCs) by lithiumintercalation enables the fabrication of high-quality contact interfaces in twodimensional(2D) electronic devices. However, controlling the intercalation oflithium is hitherto challenging in vertically stacked van der Waalsheterostructures (vdWHs) due to the random diffusion of lithium ions in thehetero-interface, which hinders their application for contact engineering of 2DvdWHs devices. Herein, a strategy to restrict the lithium intercalation pathwayin vdWHs is developed by using surface-permeation assisted intercalationwhile sealing all edges, based on which a high-performance edge-contact MoS_(2)vdWHs floating-gate transistor is demonstrated. Our method avoids intercalationfrom edges that are prone to be random but intentionally promotes lithiumintercalation from the top surface. The derived MoS_(2) floating-gatetransistor exhibits improved interface quality and significantly reduced subthresholdswing (SS) from >600 to 100 mV dec^(–1). In addition, ultrafast program/erase performance together with well-distinguished 32 memory statesare demonstrated, making it a promising candidate for low-power artificialsynapses. The study on controlling the lithium intercalation pathways in 2DvdWHs offers a viable route toward high-performance 2D electronics for memoryand neuromorphic computing purposes.

关键词： 2D vdW heterostructure high-speed floating-gate transistor interlayer lithium intercalation engineering phase-engineered contact

来源：评论

学校读者我要写书评

暂无评论

Mixed ion-electron conducting Li_(3)P for efficient cathode prelithiation of all-solid-state Li-ion batteries

引用

SmartMat 2023年第5期4卷 119-130页

作者： Jing Li Dan Liu Han Sun Deyu Qu Zhizhong Xie Haolin Tang Jinping Liu Department of Chemistry School of ChemistryChemical Engineering and Life ScienceWuhan University of TechnologyWuhanChina Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory FoshanChina State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhanChina

All-solid-state batteries(ASSBs)using sulfide electrolytes hold promise for next-generation battery *** using a pure Li metal anode is believed to maximize battery energy density,numerous recent studies have implicated that Li-ion anodes(e.g.,graphite and Si)are more realistic candidates due to their interfacial compatibility with sulfide ***,those Li-ion ASSBs suffer from an issue similar to liquid Li-ion batteries,which is a loss of active Li inventory owing to interfacial side reactions between electrode components,resulting in reduced available capacities and shortened cycle ***,for the first time,we explore the potential of Li_(3)P for cathode prelithiation of Li-ion *** identify that the crystallized Li_(3)P(c-Li_(3)P)has room-temperature ionic and electronic conductivities of both over 1o-4 s/*** a mixed ion-electron conduct-ing feature ensures that the neat c-LisP affords a high Li+-releasing capacity of 983 mAh/g in ASSBs during the first ***,the electro-chemical delithiation of c-LisP takes place below 2 V versus Li+/Li,while its lithiation dominates below 1 V versus Lit/*** used as a cathode prelithiation regent for ASSBs,c-Li_(3)P only functions as a Li+donor without lithiation activity and can adequately compensate for the Li loss with minimal dosage *** mitigating first-cycle Li loss,c-LisP prelithiation can also improve the battery cyclability by sustained release of low-dosage Li+ions in subsequent cycles,which have been embodied in several full ASSBs by coupling a LiCoO2 cathode with various types of anodes(including graphite,in foil,Sb,and Si anode).Our work provides a universal cathode prelithiation strategy for high-efficiency Li-ion AsSBs.

关键词： all-solid-state batteries cathode prelithiation Li_(3)P lithium-ion batteries mixed ion-electron conductor

来源：评论

学校读者我要写书评

暂无评论

Scalable graphene foam with ultrahigh conductivity for stabilizing Pt towards efficient hydrogen evolution

引用

Nano Research 2024年第8期17卷 6968-6976页

作者： Ming Zhao Meng Huang Huihui Jin Dayin He Wei Qian Zixin Zhang Daping He State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Hubei Engineering Research Center of RF-Microwave Technology and Application Wuhan University of TechnologyWuhan 430070China School of Information Engineering Wuhan University of TechnologyWuhan 430070China School of Chemistry and Materials Science University of Science and Technology of ChinaHefei 230026China Sanya Science and Education Innovation Park of Wuhan University of Technology Sanya 572000China

For the carbon-based catalyst to be active and stable,especially in harsh electrochemical environments,the key is to decrease the concentration of defects and raise the degree of graphitization of the carbon ***,we develop a highly graphitized graphene foam with multiplicated structure to fabricate self-supporting Pt-based catalysts for efficient and stable hydrogen evolution reaction(HER)*** foam(GO-2850)is obtained through an ultra-high temperature treatment at 2850℃,with perfect graphene structure and extremely low defect,ensuring high electrical conductivity and corrosion ***,its multiplicated structure provides an inherently favorable environment for the dispersion of Pt nanoparticles(Pt NPs)and offers abundant channels for electrolyte infiltration during the catalytic *** a result,the as-prepared Pt/GO-2850 is far active and stable than the Pt NPs supported on commercial carbon paper(Pt/CP)counterpart toward catalyzing HER,exhibiting an outstanding activity and long-term durability(300 h@10 mA·cm^(−2))in acidic/alkaline/seawater *** can be attributed to the stronger interaction between the lower-defect GO-2850 substrate and Pt,as evidenced by characterization and theoretical *** work extends further insight into the design self-supporting catalysts of high activity and stability with promising prominent application toward green energy devices.

关键词： graphene foam high graphitization Pt nanoparticles hydrogen evolution reaction long-term stability

来源：评论

学校读者我要写书评

暂无评论

Highly Selective Photocatalytic Conversion of Glucose on Holo-Symmetrically Spherical Three-Dimensionally Ordered Macroporous Heterojunction Photonic Crystal

引用

CCS Chemistry 2023年第8期5卷 1773-1788页

作者： Ting-Wei Wang Zhi-Wen Yin Yin-Hao Guo Fang-Yuan Bai Jun Chen Wenda Dong Jing Liu Zhi-Yi Hu Lihua Chen Yu Li Bao-Lian Su State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of Technology430070 Wuhan Nanostructure Research Centre(NRC) Wuhan University of Technology430070 Wuhan Laboratory of Inorganic Materials Chemistry(CMI) University of NamurB-5000 Namur

Photocatalytic conversion of biomass is considered an effective,clean,and environmentally friendly route to obtain high-valued chemicals and ***,the limited conversion efficiency and poor selectivity are still the main bottlenecks for photocatalytic biomass ***,we report the highly selective photocatalytic conversion of glucose solution on holosymmetrically spherical three-dimensionally ordered macroporous TiO_(2)-CdSe heterojunction photonic crystal structure(s-TCS).The obtained s-TCS photocatalysts show excellent stability and strong light harvesting,uniform mass diffusion and exchange,and efficient photogenerated electrons/holes separation and *** optimized s-TCS-4 photocatalyst displays the highest photocatalytic performance for glucose oxidation and hydrogen *** glucose conversion,lactic acid selectivity,and yield on s-TCS-4 are about 95.9%,94.3%,and 96.4%,*** photocatalytic production of lactic acid for s-TCS-4(18.5 g/L)is 2.3 times higher than the pure spherical TiO_(2) photonic crystal without CdSe(s-TiO_(2),8.1 g/L),and the hydrogen production rate of s-TCS-4 is 9.4 times that of s-TiO_(2).For the first time,we reveal that the photocatalytic conversion of glucose to lactic acid is a third-order and four-electron-involved *** work could shed some new light on the efficient photocatalysis conversion of biomass to highly value-added products with high selectivity and yield,and simultaneously sustainable hydrogen evolution.

关键词： TiO_(2)-CdSe heterojunction spherical photonic crystal high-selective photocatalytic glucose conversion lactic acid photocatalytic H2 production four-electron involved reaction third-order reaction

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：