检索结果-内蒙古大学图书馆

8th IEEE International Conference on Advanced power system Automation and Protection, APAP 2019

作者： Cai, Jing Dong, Xinzhou Tsinghua University State Key Laboratory of Control and Simulation of Power System and Generation Equipment Beijing China

ISBN: (纸本)9781728117225

DC-line fault recovery sequence (DFRS) is widely implemented in LCC-HVDC system to realize fast recovery in case of temporary fault. When permanent fault occurs, restart still happens several times as preset, resulting in repeated impacts and reducing the stability and reliability of the system. An adaptive restart for DC line fault is studied in this paper to deal with this problem. Firstly, the converter valves states and DC voltage characteristics under temporary fault and permanent fault are analyzed respectively. Then, a method based on DC voltage control is proposed to distinguish different fault states. Current DFRS strategy is improved by adding this process, through which the fault pole will only restart after the temporary fault disappearing, while directly blocked when a permanent fault is recognized. Fault handling time can be shortened and negative effects of DC line fault are minimized. The simulation results verify feasibility and effectiveness of proposed method. © 2019 IEEE.

关键词： HVDC power transmission

来源：评论

学校读者我要写书评

暂无评论

Traveling waves based fault line selection using sparse representation 8

Traveling waves based fault line selection using sparse repr...

引用

8th IEEE International Conference on Advanced power system Automation and Protection, APAP 2019

作者： Xu, Wen Shi, Shenxing Dong, Xinzhou Zhang, Guangmei Tsinghua University State Key Laboratory of Control and Simulation of Power System and Generation Equipment Beijing China

ISBN: (纸本)9781728117225

Traveling wave method has been proved to be effective in fault line selection of power distribution system with the neutral non-effectively grounded. However, it can be easily disturbed by non-faulty traveling wave when selecting the line. For this reason, this paper proposes a new traveling wave line selection method based on sparse representation, in which current traveling wave signals are measured for the selection task. The algorithm of selection is based on the idea that all non-zero terms in the sparse coefficients of the measured signal are found to be associated with training samples from a single class, and the test samples can be easily assigned to the class. This makes it possible to distinguish between the non-faulty traveling wave and the real fault traveling wave. © 2019 IEEE.

关键词： compressed sensing distribution system line selection sparse representation traveling wave

来源：评论

学校读者我要写书评

暂无评论

Multi-mode collaborative voltage control strategy for low-voltage flexible interconnection systems

引用

International Journal of Electrical power & Energy systems 2025年 169卷

作者： Weiru Wang Sheng Zhang Dan Pang Zhipeng Wang Yechun Xin Yanxu Wang Wei Wang Key Laboratory of Modern Power System Simulation and Control & Renewable Energy Technology Ministry of Education (Northeast Electric Power University) Jilin 132012 China State Grid Jilin Electric Power Co. Ltd. Changchun Power Supply Company Changchun 130021 China

Distributed generators (DG) exhibit output volatility, and their connection locations are unevenly distributed. The high proportion and large-scale integration of DG into low-voltage distribution networks can lead to voltage violations at line terminals and uneven feeder loads. In this paper, a flexible interconnection distribution network is constructed based on Intelligent Soft Open Points (SOP), where the operation modes of the flexible interconnection system are classified, the power transfer relationships are outlined, and the voltage violation mechanisms are analyzed. A multi-mode collaborative voltage control scheme for low-voltage flexible interconnection systems is proposed. The distribution network operation modes are classified based on the inherent voltage levels at the ends of each feeder and the load status of the main transformer. By integrating the internal energy storage system of the SOP, a multi-mode collaborative voltage control strategy based on SOP is proposed. This strategy can simultaneously manage voltage violations at the terminals of interconnected distribution lines and achieve load balancing control, with the flexibility to be applied to multi-terminal flexible interconnection scenarios. The feasibility and effectiveness of the proposed control strategy are validated through a simulation model of the constructed flexible interconnection distribution network.

关键词： Low-voltage distribution network Soft open point Flexible interconnection Hybrid energy storage Voltage overlimit

来源：评论

学校读者我要写书评

暂无评论

Development and test research of 10kV DC circuit breaker based on the principle of coupled negative voltage 16

Development and test research of 10kV DC circuit breaker bas...

引用

16th IET International Conference on AC and DC power Transmission, ACDC 2020

作者： Li, Wei Liu, Bo Xiao, Fengliang Wang, Haoqing Wang, Yuanmeng Xie, Wengang Yu, Zhanqing Shandong Taikai High-Voltage Switchgear Co. Ltd. Tai'an China China Electric Power Research Institute. Beijing China State Key Laboratory of Control and Simulation of Power System and Generation Equipment Department of Electrical Engineering Tsinghua University Beijing China

ISBN: (纸本)9781839533914

With the increase of multi-terminal flexible DC distribution network projects, medium-voltage DC circuit breaker, as the key equipment to remove DC short-circuit fault, plays a key role in the operation reliability of the whole DC distribution network. In order to meet the engineering needs of DC distribution network, a 10kV hybrid DC circuit breaker based on the coupling negative voltage principle is developed in this paper. Firstly, the topology and working principle of the DC circuit breaker are introduced. Furthermore, the design scheme of key components including fast mechanical switch, power electronic switch and coupling negative voltage device is given. Finally, a 10kV hybrid DC circuit breaker prototype is developed and tested. The results show that the 10kV hybrid DC circuit breaker can break 15kA short circuit current within 2ms, and has the characteristics of low loss and high reliability. © 2020 Institution of Engineering and Technology. All rights reserved.

关键词： Electric circuit breakers

来源：评论

学校读者我要写书评

暂无评论

Research on Transforming Effect and Calculation Method of MMC Converter on AC / DC Harmonics

Research on Transforming Effect and Calculation Method of MM...

引用

Sustainable power and Energy Conference (iSPEC)

作者： Liu Cui Guangqiang Peng Jingsong He Jiyang Wu Chizu Mao Ning Jiao State Key Laboratory of HVDC Electric Power Research Institute China Southern Power Grid GuangZhou China Guangdong Provincial Key Laboratory of Intelligent Operation and Control for New Energy Power System GuangZhou China CSG Key Laboratory for Power System Simulation Electric Power Research Institute China Southern Power Grid GuangZhou China Maintenance & Test Center EHV Power Transmission Company Guangzhou CSGKEY LABORATORY FOR DC TRANSMISSIONEQUIPMENT STATE EVALUATION AND FAULT DIAGNOSIS GuangZhou China College of Electrical Engineering and Information Technology Sichuan University Chengdu China

ISBN: (纸本)9781665414401

Modular multilevel converter (MMC) is currently the most concerned voltage source converter topology in the field of flexible direct current transmission (VSC-HVDC). Due to its non-linear characteristics, harmonic components will inevitably be generated in AC and DC systems, which may affect the operation of equipment and system, cause protection equipment to malfunction, and cause interference to neighboring communications. The MMC converter is a non-linear device, which can be considered as an amplifying modulator with voltage and current conversion functions. The AC and DC networks are coupled to each other through the MMC converter to generate dynamic harmonic interaction. In recent years, harmonic instability problems have appeared in many VSC-HVDC projects. Compared with other converter topologies, the transfer relationship of harmonics on the AC and DC sides of MMC converters has not been studied in depth. In this paper, by studying the AC/DC harmonic conversion characteristics of MMC converters, it reveals the conversion law of MMC converters between AC/DC harmonics; through theoretical derivation, the quantitative calculation method of MMC harmonic transmission process is given. PSCAD simulation results prove the correctness of the above results.

关键词： Network topology simulation Bridge circuits Voltage power system harmonics Harmonic analysis Frequency conversion

来源：评论

学校读者我要写书评

暂无评论

Reliability Evaluation of a Regional Integrated Energy system Based on Complex Network Theory

Reliability Evaluation of a Regional Integrated Energy Syste...

引用

Sustainable power and Energy Conference (iSPEC)

作者： Jifeng Li Kuizheng Song Xingtang He Hao Luo Dalian Electric Power Supply Company State Grid Liaoning Electric Power Supply Co. Ltd Dalian China Dispatching and Control Center State Grid Liaoning Electric Power Supply Co. Ltd Shenyang China Key Laboratory of the Ministry of Education on Smart Power Grids Tianjin University Tianjin China Key Laboratory of Modern Power System Simulation and Control & Renewable Energy Technology Northeast Electric Power University Jilin China

ISBN: (纸本)9781665414401

Most of the methods currently used to evaluate the reliability of integrated energy supply mainly consider such systems on a microgrid scale and focus on the effects of interactions among various energy carriers on the overall energy supply reliability of the system. As a result, it is difficult to analyze the system reliability in terms of its topology. Therefore, this paper proposes an approach for evaluating the reliability of a regional integrated energy system based on complex network theory. First, the feasibility of complex network theory application was analyzed based on the structural framework of the regional integrated energy system. Then, a weighted complex network model containing network characteristics was constructed by improving the “distance” parameter in the complex network theory. Employing this model enabled the proposal of reliability evaluation indices, including nodes and the entire system, from the perspective of the system network topology. Finally, the effectiveness and applicability of the developed method were verified by constructing a test system. The application of complex network theory for reliability evaluations of regional integrated energy systems described in this paper provides guidance for planning and constructing future systems at the level of topology reliability.

关键词： Couplings Complex networks Microgrids Energy conversion Reliability theory Propagation losses Topology

来源：评论

学校读者我要写书评

暂无评论

Coordination and Optimization of Multi-controller Parameters in power system Based on a Sphere Artificial Immune Algorithm

Coordination and Optimization of Multi-controller Parameters...

引用

第40届中国控制会议

作者： Yu Miao Du Weijie Li Jinglin School of Mechanical-electronic and Automobile Engineering Beijing University of Civil Engineering and Architecture Beijing Engineering Research Center of Monitoring for Construction Safety State Key Laboratory of Control and Simulation of Power System and Generation Equipment Tsinghua University

Interconnected power system is becoming more and more complex, in order to improve the performance of power system, the number and type of controllers are increasing. The interaction among controllers may be detrimental to the performance of power system, which would weak the performance of controllers. The purpose of this paper is to solve the problem of coordination control among controllers, firstly, a multi-controller parameter coordination model is given. Then, a spherical artificial immune algorithm is proposed to coordinate and optimize parameters among multi-damping controllers. This algorithm can reduce the computational complexity and optimize parameters globally. Finally, this algorithm is verified by the simulation of the four-machine two-area system. Compared with one similar method, simulation results show that this algorithm can effectively realize the coordination control among multi-damping controllers.

关键词： Sphere artificial immune system power system coordination control parameter optimization

来源：评论

学校读者我要写书评

暂无评论

Coordination of Electricity and Heat Dispatch Strategy Combining Carbon Trading and Peak Shaving Compensation Mechanism

Coordination of Electricity and Heat Dispatch Strategy Combi...

引用

2020 International Conference on Electronic, Electrical and Computer Applications, ICEECA 2020

作者： Ge, Weichun Li, Zhao Zhao, Dong Li, Zhenyu Ye, Qing Fu, Yu Yu, Na State Grid Liaoning Province Electric Power Company Limited Shenyang110006 China Key Laboratory of Modern Power System Simulation and Control and Renewable Energy Technology Ministry of Education Northeast Electric Power University Jilin132012 China Fuxin Power Supply Company of Liaoning Electric Power Co. Ltd Liaoning Fuxin123000 China

Integrated power generation group's participation in the carbon trading market and peaking auxiliary service market is one of the effective ways to promote low carbon power development and wind power consumption. Aiming at the serious problem of wind abandonment during the low temperature period of winter heating period in Northeast China, a multi-market mechanism is proposed. The carbon trading is analysed. Firstly, and the regional peak demand optimization model based on multi-scenario stochastic programming and the maximum wind power acceptance power calculation model of regional power grid is constructed to calculate the peak shaving demand and existing peak shaving in each period of the regional power grid. Maximum wind power acceptance under resources;Based on the coordination of carbon quotas among power generation groups and the subsection compensation mechanism of compensated peak shaving costs, and aiming at the minimum sum of total coal consumption costs, wind abandonment penalties and compensation costs, integrated dispatching model considering carbon trading and peak shaving compensation is established. Finally, an example is given to verify the rationality and effectiveness of the proposed strategy. © 2020 Published under licence by IOP Publishing Ltd.

关键词： Wind power

来源：评论

学校读者我要写书评

暂无评论

A Hybrid Model for Building-level Day Ahead power Load Forecasting Based on Gated Recurrent Unit Networks

A Hybrid Model for Building-level Day Ahead Power Load Forec...

引用

Sustainable power and Energy Conference (iSPEC)

作者： Hualu Zhang Boya Deng Jie Shi Key Laboratory of Modern Power System Simulation Control and Green Power New Technology of Ministry of Education Northeast Electric Power University Jilin Jilin Nanjing Nanrui Information Communication Technology Co. Ltd. NARI Group Corporation/State Grid Electric Power Research Institute Nanjing

ISBN: (纸本)9781665414401

Accurate forecasting of day-ahead electrical load is a key to optimize the operation of the integrated energy system (IES) and a fundamental function of the cyber-physical system (CPS) of IES. Due to the characteristics of different features, data collected by CPS often have different sampling frequencies, resulting in mining data trends inadequately when making a load forecast. This paper proposes an GRU-based model to combine historical data with different sampling frequencies in forecasting day-ahead building-level load. First, day-level features are clustered by K-means. Hour-levels features are then partitioned according to clustering results and inputted separately into a gated recurrent unit (GRU) based neural network to capture relationships between external features and load fluctuations. The temporal dependencies of minute-level data are captured by the GRU network directly without any external features. Finally, the least square method is used to combine forecasting results at each hour of two models. The simulation results present that the proposed model performs better than a single model when applying to real-world data.

关键词： Load forecasting simulation Neural networks Training data Predictive models Logic gates Data models

来源：评论

学校读者我要写书评

暂无评论

Excellent electrical properties of zinc-oxide varistors by tailoring sintering process for optimizing line-arrester configuration 7

Excellent electrical properties of zinc-oxide varistors by t...

引用

7th IEEE International Conference on High Voltage Engineering and Application, ICHVE 2020

作者： Meng, Pengfei Cao, Wei Chen, Chao Wan, Shuai Xu, Heng Hu, Jun He, Jinliang Tsinghua University Department of Electrical Engineering Beijing China Wuhan Nari Limited Liability Company State Grid Electric Power Research Institute Wuhan China Guangdong Aikang Electric Power Co. Ltd Guangzhou China State Key Laboratory of Control and Simulation of Power System and Generation Equipment Tsinghua University Department of Electrical Engineering Beijing China

ISBN: (纸本)9781728155111

We optimized the excellent electrical performance of zinc-oxide (ZnO) varistors doping of aluminum and indium by tailoring the sintering process. The surface morphology, nonlinear volt ampere properties, capacitance-voltage characteristics, and dielectric analyses were carried out. At a given aluminum and indium concentration, the average sample grain size (d) increased as lengthening sintering time from 0.5 to 2.5 h. The voltage gradient (E_{1\{mA}}) decreased from 602.4 V/mm to 356.7 V/mm. The residual voltage of the sintered varistors at the lightning impulse current (8/20\ \mu\mathrm{s}) decreased as the samples sintering holding time extended from 0.5 to 2.0 h. When the ZnO varistor was sintered for 1.5 h, the samples showed an excellent performance, with a reference voltage of 479.3 V/mm at 1 mA DC. When assembled in the line surge arresters, the obtained high-voltage-gradient ZnO varistors can decrease their length and residual voltage, which allows for better coordination of the line surge arrester with the insulators. This study has great significance to optimize line-arrester configurations and improve power-system stability. © 2020 IEEE.

关键词： Sintering

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：