检索结果-内蒙古大学图书馆

Real-time charging optimization method considering vehicle charging prediction

Dianli Xitong Zidonghua/Automation of Electric power systems 2014年第9期38卷 61-68页

作者： Li, Zhengshuo Guo, Qinglai Sun, Hongbin Xin, Shujun Department of Electrical Engineering Tsinghua University Beijing100084 China State Key Laboratory of Control and Simulation of Power Systems and Generation Equipments Tsinghua University Beijing100084 China

With large-scale electric vehicles (EVs) integrated into the power system, how to optimize EV charging power in real time to avoid incremental peak load and achieve valley-filling will be important. The regular real-time charging optimization as well as the vehicle charging prediction method is reviewed at first. Since vehicle charging (especially vehicle fleet charging) is predictable, a new real-time charging optimization model is proposed on the basis of the regular method with the consideration of the prediction model of incoming EVs. The new model is solved with receding horizon optimization, obtaining the current optimized charging power of plugged EVs. Through case study with various prediction accuracies, it can be seen that the proposed method always approaches the optimal solution to valley-filling. Moreover, compared with regular method, the proposed method would make a greater improvement of optimization result in the case of more diverse EV plug-in time. ©2014 state Grid Electric power Research Institute Press.

关键词： Forecasting

来源：评论

学校读者我要写书评

暂无评论

Automatic voltage control for ultra-high voltage AC neighboring grids

引用

Dianli Xitong Zidonghua/Automation of Electric power systems 2013年第21期37卷 99-105页

作者： Wang, Bin Guo, Qinglai Sun, Hongbin Tang, Lei Zhang, Boming Wu, Wenchuan Department of Electrical Engineering Tsinghua University Beijing 100084 China State Key Laboratory of Control and Simulation of Power Systems and Generation Equipments Tsinghua University Beijing 100084 China

The connection of ultra-high voltage (UHV) transmission line has brought a challenge to the voltage operation and control of its neighboring power system. Facing engineering practice, this paper proposes an automatic voltage control (AVC) method for the UHV neighboring grids. The reactive voltage operation and control characteristics of UHV neighboring grids are analyzed, including the tremendous impact of UHV active power flow change on the bus voltage in UHV neighboring grids, the large voltage fluctuation, and the tight coupling among power plants and substations, etc. The smart voltage optimal control technology is proposed and implemented by taking into consideration these characteristics and the coordinated control among tightly coupled power plants and substations in the UHV neighboring grids. This method can reduce the irrational reactive power flow and bypass the unnecessary discrete device action, while ensuring voltage security. The proposed method is put into closed-loop field operation in China for its validated efficiency and practicability. ©2013 state Grid Electric power Research Institute Press.

关键词： Smart power grids

来源：评论

学校读者我要写书评

暂无评论

A look-ahead generation dispatch method considering discrete generation regulation constraints with large-scale wind power integration

引用

Dianli Xitong Zidonghua/Automation of Electric power systems 2014年第10期38卷 36-42页

作者： Li, Zhigang Wu, Wenchuan Zhang, Boming Sun, Hongbin Department of Electrical Engineering Tsinghua University Beijing100084 China State Key Laboratory of Control and Simulation of Power Systems and Generation Equipments Tsinghua University Beijing100084 China

Look-ahead generation dispatch is a critical measurement to accommodate large-scale integration of wind power generation. In real application, the model for conventional generators should involve generation regulation constraints including regulation frequency constraints and discrete output constraints. Look-ahead generation dispatch with regulation constraints is a large-scale nonlinear mixed-integer programming problem, and it could be hardly solved strictly within acceptable time. An efficient three-stage method for solving this problem is developed, together with a forward-backward-pass dynamic programming approach for handling generation regulation constraints. Numerical tests are taken on IEEE 31-bus systems and a large-scale 264-bus power system to verify the high efficiency and practicability of the proposed method.

关键词： Wind power

来源：评论

学校读者我要写书评

暂无评论

A hierarchical model predictive control method of active power for accommodating large-scale wind power integration

引用

Dianli Xitong Zidonghua/Automation of Electric power systems 2014年第9期38卷 6-14页

作者： Zhang, Boming Chen, Jianhua Wu, Wenchuan Department of Electrical Engineering Tsinghua University Beijing100084 China State Key Laboratory of Control and Simulation of Power Systems and Generation Equipments Tsinghua University Beijing100084 China

With the ever-increasing size of the power grid and the large-scale integration of stochastic renewable energy, the conventional active power dispatch method has become inapplicable. Therefore, a model predictive control (MPC) based method is proposed to deal with the stochastic characteristic of the grid. Meanwhile, a multi-layer MPC scheme using the industrial large system hierarchical control strategy as a source of reference is adopted to deal with the difficult active power dispatch problem with large-scale wind power integration. The evolutionary process and the corresponding control mechanism of the proposed control scheme are given. ©2014 state Grid Electric power Research Institute Press.

关键词： Model predictive control

来源：评论

学校读者我要写书评

暂无评论

Secondary voltage control considering rapid dynamic reactive power compensation

引用

Dianli Xitong Zidonghua/Automation of Electric power systems 2015年第2期39卷 53-60页

作者： Wang, Xuran Guo, Qinglai Sun, Hongbin Wang, Bin Zhang, Mingye Zhang, Boming Department of Electrical Engineering Tsinghua University Beijing100084 China State Key Laboratory of Control and Simulation of Power Systems and Generation Equipments Tsinghua University Beijing100084 China

This paper presents a secondary voltage control system considering rapid dynamic var compensators, such as static var compensator/static synchronous compensator (SVC/STATCOM). In order to take full advantage of the rapid adjustment feature of SVC/STATCOM in static voltage control and transient voltage stability, two independent control stages are dealt with. In the first stage, SVC/STATCOM and conventional var compensators are incorporated in the coordinate secondary voltage control model to bring the rapid adjustment feature of SVC/STATCOM into full play. In the second stage, a quadratic programming model is designed to do the optimal control of the dynamic reactive power reserves. The reactive power compensation of the slow dynamic var compensators is substituted for that of SVC/STATCOM, and the dynamic reactive power reserves level is improved. Through coordination between sequence and space, all kinds of reactive power compensators are made full use of in the secondary voltage control and transient voltage stability prevention control. Nordic system test results show that the system can greatly improve the response speed of traditional secondary voltage control while avoiding the conflict between SVC/STATCOM and the traditional reactive power compensators. At the same time, the system is able to carry out effective preventive control of transient voltage stability and improve the recovery effect of system voltage after the disturbance. ©, 2015 state Grid Electric power Research Institute Press.

关键词： Reactive power

来源：评论

学校读者我要写书评

暂无评论

Fault current suppression for MMC-MTDC with the resistive type superconducting fault current limiter

Fault current suppression for MMC-MTDC with the resistive ty...

引用

2021 Annual Meeting of CSEE Study Committee of HVDC and power Electronics (HVDC 2021)

作者： G. Liu P. Guo Z. Yuan Y. Zhao Shenzhen Power Supply Corporation Shenzhen China State Key Laboratory of Control and Simulation of Power Systems and Generation Equipment Department of Electrical Engineering Tsinghua University Beijing China

With effective properties, a resistive-type superconducting fault current limit (R-SFCL) has become an effective device to restrain DC-side bipolar short fault currents in multilevel modular converter multiterminal DC systems (MMC-MTDCs). However, due to the resistance-energy accumulation-dependent characteristics of the R-SFCL device, the fault durations and different fault current values will produce various output resistances at each fault stage, and the related coordinated protection and control strategy needs to be adjusted accordingly. Therefore, in the first part of this paper, we analysed the DC side short circuit current mechanism and the fault current restraint characteristics of R-SFCLs. Subsequently, to verify the above analysis, the R-SFCL-based four-terminal MMC-MTDC with DC bipolar short fault modelling and simulation are presented in the next section. Finally, based on the above analysis and research, the advanced DC bipolar fault control and protection strategies of the R-SFCL-based MMC-MTDC system are discussed to promote further study of coordinated and protection control and the application of R-SFCLs in subsequent engineering applications.

关键词： fault current limiters short-circuit currents HVDC power transmission HVDC power convertors superconducting fault current limiters

来源：评论

学校读者我要写书评

暂无评论

Reactive voltage control of bidirectional-interaction coordination between provincial and district power networks with wind power integration

引用

Dianli Xitong Zidonghua/Automation of Electric power systems 2014年第24期38卷 48-55页

作者： Wang, Bin Guo, Qinglai Li, Haifeng Sun, Hongbin Tang, Lei Zhang, Boming State Key Laboratory of Control and Simulation of Power Systems and Generation Equipments Tsinghua University Beijing100084 China Department of Electrical Engineering Tsinghua University Beijing100084 China

An agile and coordinated voltage control method is proposed to deal with the power system reactive power and voltage operation with large scale wind power integration. In the provincial control center, the agile voltage control method with the wind power volatility and the power system N-1 security constraints taken into account is proposed. With this method, by means of the adaptive adjustment of the control period and control model, the wind farm reactive ability will be fully tapped to suppress the influence of wind fluctuations on the bus voltage while sufficient dynamic reactive power regulation margin of traditional generators will be retained. Between provincial and prefectural control centers, the bidirectional interaction based voltage control method is presented to support the voltage at the terminal power network while bypassing the unnecessary discrete device action on the prefectural grid. By coordinated voltage control among the wind farms and substations in the provincial power system, the control abilities of its own wind farms will be made full use of, there will be less capacitor and reactor action times in its own substations and unnecessary reactive power flow. By the bidirectional interaction between provincial and prefectural control centers, the distributed adjustment resources can well be used to support the voltage at the terminal power network and increase the safety and economy of overall operation of the power system. The wind automatic voltage control system is currently in real-time operation in Jiangsu power system. © 2014 state Grid Electric power Research Institute Press.

关键词： Voltage control

来源：评论

学校读者我要写书评

暂无评论

A robust interval economic dispatch method accommodating large-scale wind power generation. Part one: Dispatch scheme and mathematical model

引用

Dianli Xitong Zidonghua/Automation of Electric power systems 2014年第20期38卷 33-39页

作者： Li, Zhigang Wu, Wenchuan Zhang, Boming Department of Electrical Engineering Tsinghua University Beijing100084 China State Key Laboratory of Control and Simulation of Power Systems and Generation Equipments Tsinghua University Beijing100084 China

Large-scale wind power integration imposes technical challenges to the power system operation and scheduling. Traditional deterministic generation dispatch methods cannot ensure system operation security because they don't incorporate wind power uncertainties appropriately. A new robust dispatch scheme based on the wind power prediction interval is introduced for intra-day active power dispatch, in which wind farms are controlled with the maximum-power-point-tracking strategy mostly. This scheme is featured with flexibility and practicality. In combination with this scheme, a robust interval economic dispatch model is formulated as a robust optimization method and further simplified as a quadratic programming, taking the response of AGC regulation into consideration. Finally, Monte Carlos simulations are conducted on a modified IEEE 24-bus system to compare performance of the proposed approach and the traditional one, and the robustness, reliability and economy of the robust dispatch scheme is verified. © 2014 state Grid Electric power Research Institute Press

关键词： Quadratic programming

来源：评论

学校读者我要写书评

暂无评论

Grid dispatch model and interconnection benefit analysis of concentrating solar power plants with thermal storage

引用

Dianli Xitong Zidonghua/Automation of Electric power systems 2014年第19期38卷 1-7页

作者： Chen, Runze Sun, Hongbin Li, Zhengshuo Liu, Yibing Department of Electrical Engineering Tsinghua University Beijing100084 China State Key Laboratory of Control and Simulation of Power Systems and Generation Equipments Tsinghua University Beijing100084 China

Nowadays, the concentrating solar power (CSP) plant with thermal storage is a new way to utilize solar power. By making full use of large-capacity CSP devices, the CSP system is able to translate the solar power absorbed. Additionally, the CSP generates power via a steam turbo-generator and has fast regulating performance. The operation behavior of CSP is studied from the viewpoint of power grid, based on which its mathematical model for dispatch is developed. The model describes the power flow inside the CSP with its major operation constraints. Furthermore, the model for power system dispatch considering CSP plants is built based on the security-constrained unit commitment problem. It is shown by simulation that CSP, on the premise of its energy being fully accommodated, may bring about considerable benefits to the power system by reducing the generation cost, increasing renewable energy accommodation and enhancing utilization of transmission lines. © 2014 state Grid Electric power Research Institute Press.

关键词： Concentrated solar power

来源：评论

学校读者我要写书评

暂无评论

Autonomous-synergetic energy management system family for smart grids: concept, architecture and cases

引用

Dianli Xitong Zidonghua/Automation of Electric power systems 2014年第9期38卷 1-5and14页

作者： Sun, Hongbin Zhang, Boming Wu, Wenchuan Guo, Qinglai Department of Electrical Engineering Tsinghua University Beijing100084 China State Key Laboratory of Control and Simulation of Power Systems and Generation Equipments Tsinghua University Beijing100084 China

Energy management system (EMS), known as the brain of power grid, utilizes information flow to control energy flow so as to keep power grid operation efficient and secure. Conventionally, the EMS is a centralized one with both information collecting and decision-making centralized. This architecture is facing a serious challenge in mass information collecting and faster decision, especially in smart grid environment. A new concept of distributed autonomy and centralized synergy is proposed and the EMS family covering all sections of smart grids (e.g. source, grid and demand) is concretized. Both commonness and individuality of these EMS family members are discussed. Several new members of EMS family including wind farm EMS, substation EMS and electric vehicle (EV) aggregator EMS are presented, to demonstrate their autonomous characteristic. Interaction among EMS family members is introduced to coordinate the members so as to implement source-grid-demand synergy to form an EMS family network. Several examples of interaction among the EMS family, such as interactions between transmission and distribution, between substations and control center, and between wind farm and EV aggregator, are introduced. ©2014 state Grid Electric power Research Institute Press.

关键词： Energy management systems

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：