检索结果-内蒙古大学图书馆

2021 International Conference on power System Technology, powerCON 2021

作者： Liu, Kun Ren, Xuan Wang, Bin Power Dispatch Control Center of Guangdong Power Grid Co. Ltd Key Lab for Protective Relaying Real Time Digital Simulation of Guangdong Power Grid Co. Ltd. Guangzhou China Tsinghua University Key Laboratory of Control and Simulation of Power Systems and Generation Equipment Department of Electric Engineering Beijing China

ISBN: (纸本)9781665407373

Cause identification of single-line-to-ground fault in the distribution system is of great significance to the electric workers for fault isolation and rapid maintenance. The key of fault cause identification is to accurately and quickly distinguish human electric shock faults from non-biological faults. In this paper, human electric shock faults and non-biological faults are modeled and fault characteristics are analyzed. Based on the differences between shape and rotation characteristic of the volt-ampere characteristic curves, a fault cause identification method which can distinguish human electric shock faults from non-biological faults is proposed. simulations show the effectiveness of the method. © 2021 IEEE.

关键词： Electric grounding

来源：评论

学校读者我要写书评

暂无评论

Basic reason for the accumulation of charge on the surface of polymer dielectrics

引用

Science China Materials 2022年第10期65卷 2884-2888页

作者： Tianyu Wang Xiaofen Li Boya Zhang Dayu Li Jianbo Liu Guixin Zhang State Key Laboratory of Control and Simulation of Power System and Generation Equipment Department of Electrical EngineeringTsinghua UniversityBeijing 100084China Key Laboratory of Advanced Materials(MOE) School of Materials Science and EngineeringTsinghua UniversityBeijing 100084China State Key Laboratory of Electrical Insulation and Power Equipment Xi’an Jiaotong UniversityShaanxi 710049China

Due to their outstanding electrical insulation performance,low energy loss and high reliability,polymer dielectrics are widely used in flexible electronics,capacitors and large-scale power transmission equipment[1–5].However,polymer dielectrics accumulate large amounts of charge on their surface during use,which causes local electric field distortion and induces flashover,explosion,and equipment damage[6–9].Although researchers have attempted to develop methods to reduce the accumulation of surface charge through material modification,such as plasma treatment[10],direct fluorination[11],and coating[7,9,12],each of these methods has drawbacks;thus,the bottleneck has yet to be overcome.

关键词：电荷量第一性原理计算聚合物表面电介质电场畸变深能级缺陷电荷测量电荷特性

来源：评论

学校读者我要写书评

暂无评论

Study on the thermal-electrical balance of the kW-class SOFC stack 17

Study on the thermal-electrical balance of the kW-class SOFC...

引用

17th International Symposium on Solid Oxide Fuel Cells, SOFC 2021

作者： Li, Biao Lyu, Zewei Han, Minfang Sun, Kaihua Sun, Zaihong Liu, Yang Department of Energy and Power Engineering State Key Laboratory of Control and Simulation of Power Systems and Generation Equipment Tsinghua University Beijing100084 China Xuzhou Huatsing Jingkun Energy Co. Ltd. Jiangsu Province 221004 China

ISBN: (纸本)9781607685395

Heat and electricity are deeply coupled in solid oxide fuel cell (SOFC) stacks, and the balance and control between them are vital to the steady working condition and outputs. Therefore, studying the balance mechanism of heat and electricity is important to achieve the safe and stable operation of the SOFC stacks. In this paper, a semi-empirical simulation model of a kilowatt-level SOFC stack was established. Based on this model, the effects of different operating temperatures, flow rates, air to H2 ratios (AHR), and steam to carbon (S/C) ratios on the thermoelectric balance state of the SOFC stack were analyzed. Results show that the I-V curve can be separated into three parts: unbalance zone, unsustainable zone, and the self-heat balance zone by the self-heat balance voltage (SHBV) and the critical voltage (CV). The approximate voltage scope of the balance zone under different conditions is 0.6~0.9 V. © 2021 Electrochemical Society Inc.. All rights reserved.

关键词： Specific heat

来源：评论

学校读者我要写书评

暂无评论

Improvement of the Electrical Properties of Silicone Rubber Doped with Nano-zirconia Grafted by Voltage Stabilizer

Improvement of the Electrical Properties of Silicone Rubber ...

引用

International Conference on Electrical Materials and power Equipment (ICEMPE)

作者： Xiaoqian Zhu Yuanxiang Zhou Yunxiao Zhang Ming Chen Xuanhao Liu State Key Lab of Control and Simulation of Power System and Generation Equipment & Department of Electrical Engineering Tsinghua University Beijing China College of Electrical Engineering and Automation Fuzhou University Fuzhou China Xiamen Power Supply Company State Grid Fujian Electric Power Company Xiamen China The Wind Solar Storage Division of State Key Laboratory of Control and Simulation of Power System and Generation Equipment School of Electrical Engineering Xinjiang University Urumqi China

Enhancing the electrical performance of silicone rubber (SiR) for cable accessories is noteworthy as they are almost the weakest parts of the cable system. Two types of voltage stabilizers were grafted onto the surface of nano-zirconia (ZrO 2 ) particles, and the grafted nanoparticles were added to the SiR. Measurements such as breakdown strength, and conductivity were carried out to evaluate the electrical performance of SiR nanocomposites. The electrical performance measurement results indicated that the breakdown strength of the nanocomposite SiR improved while the conductance current was reduced. The trap distribution showed that the improvement of the electrical performance of the nanocomposite SiR is mainly due to the decrease of the shallow trap density or the increase of the deep trap density.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Precise regulation of acid pretreatment for red mud SCR catalyst:Targeting on optimizing the acidity and reducibility

引用

Frontiers of Environmental Science & Engineering 2022年第7期16卷 61-71页

作者： Xiang Zhang Yue Xuan Bin Wang Chuan Gao Shengli Niu Gaiju Zhao Dong Wang Junhua Li Chunmei Lu John C.Crittenden National Engineering Laboratory for Coal-Burning Pollutants Emission Reduction School of Energy and Power EngineeringShandong UniversityJinan250061China School of Civil and Environmental Engineering and the Brook Byers Institute for Sustainable Systems Georgia Institute of TechnologyAtlantaGA30332USA State Key Joint Laboratory of Environment Simulation and Pollution Control National Engineering Laboratory for Multi Flue Gas Pollution Control Technology and EquipmentSchool of EnvironmentTsinghua UniversityBeijing100084China Energy Institute Qilu University of Technology(Shandong Academy of Sciences)Jinan250013China

Red mud(RM),as an alkaline waste,was recently proved to be a promising substitute for the SCR *** could improve the acidity and reducibility of red mud,which were critical for SCR ***,the dealkalization effect depended on the reaction between acid solution and red *** this study,we realized the directional control of the chemical state of active sites through tuning the acid pretreatment(dealkalization)*** pretreatment endpoint was controlled at pH values of 3–5 with diluted nitric *** the pH values of red mud were 3 and 5(CRM-3 and CRM-5),activated catalysts showed NOx conversion above 90%at 275℃–475℃.The high initial reaction rate,Ce^(3+)/(Ce^(3+)+Ce^(4+))ratio,and surface acidity accounted for the excellent SCR performance of CRM-5 ***,more Fe^(3+) on the CRM-3 surface improved the NH_(3) *** was a strong interaction between Al and Fe in both CRM-5 and CRM-3 *** results showed that the adsorption capacity of the Al-O_(3)-Fe for NH_(3) and NO is stronger than that of Fe-O_(3)-Fe,which enhanced the NOx conversion of the ***,the almandine was formed in CRM-4,consumed part of Fe^(3+) and Al^(3+),and the interaction between Al and Fe was ***,deposited almandine on the catalyst surface covered the active sites,thus leading to lower NH_(3)-SCR activity.

关键词： Air pollution control Nitrogen oxides Selective catalytic reduction Red mud Solid waste utilization

来源：评论

学校读者我要写书评

暂无评论

Initial-stage performance evolution of solid oxide fuel cells based on polarization analysis 17

Initial-stage performance evolution of solid oxide fuel cell...

引用

17th International Symposium on Solid Oxide Fuel Cells, SOFC 2021

作者： Wang, Yige Lyu, Zewei Han, Minfang Sun, Zaihong Sun, Kaihua Department of Energy and Power Engineering State Key Laboratory of Control and Simulation of Power Systems and Generation Equipment Tsinghua University Beijing100084 China Xuzhou Huatsing Jingkun Energy Co. Ltd. Jiangsu Province Xuzhou221005 China

ISBN: (纸本)9781607685395

The performance evolution of solid oxide fuel cells (SOFCs) is more pronounced and non-linear in the initial stage, determining the output level during subsequent long-term operation. In this study, an industrial-size (10×10 cm2) cell was tested under 0.1 A cm-2 for 96 hours. I-V-P curves and EIS data under different DC bias (0, 0.05, 0.10, 0.30, 0.50, 0.70 A cm-2) were periodically recorded every 24 hours to investigate the mechanism of initialstage performance evolution. The ohmic loss was identified as the main contributor to the total overpotential, especially under large current density. The cell performance increased during 4-24 h due to the enhancement of anode gas-phase diffusion/conversion processes, while the performance degraded significantly during 48- 96 h caused by the deterioration of anode charge transfer reaction. The EIS evolution trend under different DC bias was consistent, while the evolution degree was larger under smaller current density. © 2021 Electrochemical Society Inc.. All rights reserved.

关键词： Deterioration

来源：评论

学校读者我要写书评

暂无评论

Wind power generation Capacity Evaluation Based on Correlation Analysis of Adjacent Wind Farms

Wind Power Generation Capacity Evaluation Based on Correlati...

引用

2021 IEEE Sustainable power and Energy Conference, iSPEC 2021

作者： Sun, Shuxin Qiao, Ying Lu, Zongxiang Ma, Yanhong Tsinghua University State Key Lab of Control and Simulation of Power Systems and Generation Equipments Dept. of Electrical Engineering Beijing100084 China State Grid Gansu Electric Power Company Wind Power Technology Center Lanzhou730050 China

ISBN: (纸本)9781665414395

Accurate assessment of the power generation capacity of the wind farm is the key basis for incorporating it into power system scheduling and other optimizing operation activities. Traditional evaluation methods, such as benchmarking wind turbine method, have higher requirements for input data, but many wind farms in operation for many years are difficult to meet such data conditions. A new power generation capacity evaluation method based on correlation analysis of adjacent wind farms is proposed in this paper. Meteorological data and power of adjacent wind farms are used as replaced input data based on correlation analysis between the target farm with its adjacent farms. First, anticipate wind speed data and then construct the wind power curve with three different neural networks to evaluate power generation capacity. Afterwards, adjacent wind farms are used as data sources to fit the power data of the target wind farm with the application of influence radius method, inverse square distance method and bilinear interpolation method. Finally, combined with data in the actual case, investigate the advantages and disadvantages of different methods in the evaluation of power generation capacity. © 2021 IEEE.

关键词： Time delay

来源：评论

学校读者我要写书评

暂无评论

Research on Digital Twin Modeling Method for Combustion Process Based on Model Reduction

SSRN

引用

SSRN 2024年

作者： Zhang, Yue Li, Jiale Department of Automation North China Electric Power University Hebei Baoding071000 China Hebei Technology Innovation Center of Simulation & Optimized Control for Power Generation North China Electric Power University China Baoding Key Laboratory of State Detection and Optimization Regulation for Integrated Energy System China

In response to the difficulty in obtaining combustion information within coal-fired boiler furnaces, a method is proposed in this study to improve the reduced-order model using clustering segmentation. This approach aims to rapidly predict the combustion temperature field inside the furnace by establishing a twin model of the combustion temperature field. Initially, a finite element method is employed to analyze the combustion system of a 600MW subcritical boiler under various operating conditions. Subsequently, cross-sectional data from burner nozzle positions at each operating condition are extracted. These data are subjected to Proper Orthogonal Decomposition (POD), Spectral Proper Orthogonal Decomposition (SPOD), and Wavelet Transform-POD (WT-POD) for dimensionality reduction to obtain modal data. Comparative analyses are conducted on the modal data obtained from different methods. Furthermore, based on modal data analysis, a Support Vector Machine (SVM) regression model is selected to reconstruct the temperature field. The average absolute error of the reconstructed temperature fields from three methods under different operating conditions is then compared. Finally, the model is refined using clustering segmentation, resulting in an improvement of approximately 0.6% in reconstruction accuracy. This enhancement demonstrates that the clustered POD-SVR-GA model achieves higher accuracy in reconstructing combustion temperature fields after clustering-based improvements. © 2024, The Authors. All rights reserved.

关键词： Support vector machines

来源：评论

学校读者我要写书评

暂无评论

Short-term power Prediction Based on Improved NWP Data Considering Wind Speed Distribution Inner Wind Farm

Short-term Power Prediction Based on Improved NWP Data Consi...

引用

IEEE Conference on Energy Internet and Energy System Integration (EI2)

作者： Wei Ma Ying Qiao ZongXiang Lu ZhiFeng Liang JiaMing Li YuChen Hao State Key Laboratory of Control and Simulation of Power Systems and Generation Equipments of Electrical Engineering Tsinghua University Beijing China State Grid Corporation of China Beijing China State Grid Jiangsu Power Grid Corporation Nanjing China

The wind farm has only one NWP data point, which cannot accurately reflect the wind resources inside the wind farm. To solve the problem of a poor match between short-term wind power prediction numerical weather forecast and wind farm measured weather. Put forward a kind of based on clustering and temporal characteristics of the modified liters of scale wind power prediction method, first of all, using EOF orthogonal decomposition method to extract the features of each fan, using hierarchical analysis method of the characteristics of the data matrix clustering, and then, each cluster sample selected representative of a fan, using the error transfer characteristic of the NWP data sequence is modified. Finally, The CNN prediction model is used for power prediction, and the weight is determined according to the cluster sample size. A wind farm in northern Hebei, China, is used to verify the effectiveness of the proposed method.

关键词： Fans Wind speed System integration Wind farms Wind power generation Predictive models Feature extraction

来源：评论

学校读者我要写书评

暂无评论

Analysis and Suppression of Subsynchronous Oscillation of RuDong Wind power Through MMC-HVDC system

Analysis and Suppression of Subsynchronous Oscillation of Ru...

引用

2021 Annual Meeting of CSEE Study Committee of HVDC and power Electronics, HVDC 2021

作者： Li, Jingyi Xie, Xiaorong Yang, Jianjun Li, Haozhi Shi, Zhaohui Wang, Ke Fu, Chunxiang Yang, Wenbin Key Laboratory of Far-shore Wind Power Technology of Zhejiang Province Huadong Engineering Corporation Limited Power China Zhejiang Province Hangzhou310014 China Dept. of Electrical Engineering Tsinghua University State Key Lab of Control and Simulation of Power Systems and Generation Equipment Haidian District Beijing100084 China

ISBN: (纸本)9781839537035

There may be complex interaction between the converter control systems of wind power and MMC-HVDC, which will lead to sub-/super-synchronous oscillation and threaten the safe and stable operation of the system. The relevant events have been reported in Guangdong Nan'ao, Shanghai Nanhui and Zhangbei projects. Rudong offshore wind power project is the first offshore wind power transmission system in China, and it is still under construction. Therefore, it is of great significance to carry out the research on the risk analysis and suppression measures of sub-synchronous oscillation in Rudong wind power MMC-HVDC system. First, the time-domain simulation model of Rudong wind power MMC-HVDC system is built in the PSCAD/EMTDC simulation model. Then, the effects of the number of wind turbine generators, wind power output and the parameters of MMC-HVDC controller on the sub-/supersynchronous oscillation characteristics of the system are further analyzed. Finally, the suppression measures based on supplementary frequency dependent gain control are proposed, the application position of the controller is discussed, and the parameter optimization method of the controller is given. The research content provides a certain guiding significance for the operation and control of Rudong wind power MMC-HVDC. © 2021 IET Conference Proceedings. All rights reserved.

关键词： Wind power

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：