检索结果-内蒙古大学图书馆

第34届中国控制与决策会议

作者： Xiyuan Shan Tao Cai Zhicheng Zong Hongbo Mu School of Automation Beijing Institute of Technology State Key Laboratory of Intelligent Control and Decision of Complex Systems

Aiming at the problems containing complex working conditions,modeling difficulties and long-time delay of thermoelectric cooler temperature control system,an improved ADRC control method combining ADRC and Smith predictor is proposed in this *** deals with the disturbances and uncertain dynamics in the system,SP compensates the time delay to improve the control *** with the traditional PID controller,the proposed control method has faster response speed and stronger anti-disturbance ability,meanwhile,overcomes the dependence of Smith predictor on object parameters to a certain *** simulation and experimental verification,a good control effect is obtained,which provides a positive guidance of the related application of thermoelectric cooler.

关键词： Thermoelectric cooler(TEC) Active Disturbance Rejection control(ADRC) Smith Predictor(SP) Temperature control System

来源：评论

学校读者我要写书评

暂无评论

An Improved Active Disturbance Rejection control Method for Crane System

An Improved Active Disturbance Rejection Control Method for ...

引用

第34届中国控制与决策会议

作者： Yubo Sun Xiyuan Shan Zhicheng Zong School of Automation Beijing Institute of Technology State Key Laboratory of Intelligent Control and Decision of Complex Systems

In order to improve the dynamic performance of the underdriven crane system,an improved linear active disturbance rejection controller(LADRC) based on the new error was *** improved LADRC takes the error value between the disturbance and its observed value multiplied by a coefficient as the basis for adjusting the linear extended state observer(LESO).The improved method has two ***,the new error can prevent the traditional LESO from choosing larger parameter adjustment disturbances,which will limit the performance of the ***,the pole can be configured by adjusting the coefficient to obtain better dynamic ***,the effectiveness of the proposed method is verified by simulation and *** proposed method can effectively restrain the swing of the payload and it is robust to system parameters perturbation as well.

关键词： Crane LADRC New Error Underdriven System

来源：评论

学校读者我要写书评

暂无评论

GAT-Net:A Network using Grid Attention and Transformer for Dynamic Facial Expression Recognition

GAT-Net:A Network using Grid Attention and Transformer for D...

引用

第34届中国控制与决策会议

作者： Wenxin Dai Yaping Dai Kaoru Hirota Shuai Shao School of Automation Beijing Institute of Technology State Key Laboratory of Intelligent Control and Decision of Complex Systems

Dynamic facial expression recognition(DFER) in the wild has received widespread attention *** are complex factors such as face occlusion and pose variation in the *** expression recognition has a subtle competition between capturing local features of a human face and obtaining a global feature *** paper proposes an end-to-end DFER network GAT-Net based on the grid attention module and Transformer,which improves the robustness and accuracy of DFER in the ***,GAT-Net is divided into two components:spatial feature extraction and temporal feature *** grid attention module of the spatial feature extraction component guides the network to pay attention to the local salient features of the face,which reduces the interference of field occlusion and non-frontal *** Transformer in the temporal feature processing component guides the network to learn the temporal relationship of high-level semantic features and the global representation of facial expression *** two components balance the subtle competition between local features and global feature representations of facial *** ablation experiment has proved the effectiveness of the grid attention module and *** demonstrate that our GAT-Net outperforms state-of-the-art methods on DFEW and AFEW benchmarks with accuracies of 67.53%,and 50.14% respectively.

关键词： Facial Expression Recognition Deep Learning Attention Mechanism Transformer

来源：评论

学校读者我要写书评

暂无评论

Manual Alignment of Dual End-Effectors for Piezo-Driven Microhand

Manual Alignment of Dual End-Effectors for Piezo-Driven Micr...

引用

IEEE International Conference on Real-time Computing and Robotics (RCAR)

作者： Jichao Pang Dan Liu Xiaoqing Tang Yan Chen Qiang Huang Tatsuo Arai Xiaoming Liu Beijing Advanced Innovation Center for Intelligent Robots and Systems and School of Mechatronical EngineeringBeijing Institute of Technology Key Laboratory of Biomimetc Robots and Systems Ministry of Education State Key Laboratory of Intelligent Control and Decision of Complex System Beijing China Center for Neuroscience and Biomedical Engineering The University of Electro-Communications Tokyo Japan

ISBN: (数字)9798350372601

ISBN: (纸本)9798350372618

In recent years, micromanipulator with dual end-effectors called microhand has been widely used in industrial and biological fields. Whether the tip positions of the two end-effectors of the microhand can be accurately aligned seriously affects the precise grasping of the microhand. However, few researchers have presented practical ways for precisely aligning the tip positions of a 6-DOF microhand’s two end- effectors. This paper proposes a novel, inexpensive, lightweight, robust, and easy-to-use microhand dual end-effectors clamping device that can precisely and quickly align the two end-effectors of a 6-DOF microhand. First, we describe the microhand dual end-effectors clamping device’s lightweight structural design. After that, we simplify the microhand dual end-effectors clamping device model and create a mathematical model to determine the relationship between the end-effectors’ tip position and the rotation angles of screw No.1, screw No.2, screw No.3 of the microhand dual end-effectors clamping device. Through experimentation, we are able to attain precise alignment of the two end-effectors tip positions of the 6-DOF microhand, so we confirm that our mathematical model is true. Finally, we use the impulse response of PZT in the microhand’s lower module to confirm the stability of the microhand dual end- effectors clamping device. We believe that the proposed the microhand dual end-effectors clamping device has great potential in industrial and biological applications as a universal tool for precise alignment of the tip positions of the two end-effectors of a 6-DOF microhand.

关键词： Costs Accuracy Fasteners End effectors 6-DOF Mathematical models Biology

来源：评论

学校读者我要写书评

暂无评论

Relative Localization for UAV-UGV Based on Correlation of Bearing and Distance

Relative Localization for UAV-UGV Based on Correlation of Be...

引用

IEEE International Conference on Mechatronics and Automation

作者： Jia Guo Kang Hu Jinting Liu State Key Laboratory of Intelligent Control and Decision of Complex Systems School of Automation Beijing Institute of Technology No.5 Zhongguancun South Street Beijing China

To ensure reliable localization for Unmanned Aerial Vehicles(UAVs) in the presence of uncertain speed of the Unmanned Ground Vehicle (UGV), this study examines the relative localization problem of UAV-UGV using distance and bearing measurements. A Correlation of Bearing and Distance-based Relative Localization (CBDRL) algorithm is proposed in this paper under this scenario. The estimation of altitude, distance, and angle are simplified into a representation of the relative positioning between the UAV and UGV. The relative height difference is measured using the barometer in the algorithm. To determine the relative distance, Time of Arrival (TOA) ranging and Ultra Wide Band (UWB) communication are utilized. The relative direction measurement is then determined using the correlations of bearing and distance. We integrate these observations with height, direction, and distance data in an Extended Kalman Filter(EKF) to provide accurate and reliable relative position estimates that allow the UAV to track the target. The simulation results indicate that the CBDRL method developed in this study is superior to previous relative localization algorithms that rely on multi-sensor fusion, and can significantly enhance the accuracy of UAV positioning provided that range and angle measurements are precise enough.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Analysis of LoRa for Electronic Shelf Labels Based on Distributed Machine Learning

Analysis of LoRa for Electronic Shelf Labels Based on Distri...

引用

Chinese control Conference (CCC)

作者： Malak Abid Ali Khan Hongbin Ma Ying Jin Jingxiang Ma Zia Ur Rehman Mizanur Rahman School of Automation Beijing Institute of Technology Beijing China State Key Laboratory of Intelligent Control and Decision of Complex Systems Beijing Institute of Technology Beijing China

Deforestation is the primary source of global warming; traditional shelf labels use paper to display the price of the products, and human forces play a pivotal role in updating the tags where the pandemic has strictly limited its power. Various technologies provide connectivity and a fast-updating system to eliminate the paper-based approach. LoRa is one of the contenders to design the system for electronic shelf labels (ESLs). In this paper, LoRa has been used to minify data losses and guarantee the successful decoding of the carrier signals. The data parallelism at the network server (NS) is used to distribute the data packets among the gateways (GWs) for concurrent transmissions to the end devices (EDs). The EDs are placed in different ranges using machine clustering to avoid intra-SF interference and collision. The data rate (DR) and spreading factors (SFs) have been proposed to improve the performance of pure and slotted ALOHA for the properly allocated tags. The orthogonality principles follow industrial, scientific, and medical regulations (ISM) to avoid data traffic congestion. GWs under different duty cycles (DC) and bandwidth (BW) are examined to minify the network saturation and reduce the energy harvesting of the tags.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Coordinated Motion control for a Six-wheel-drive Skid-steering Mobile Robot

Coordinated Motion Control for a Six-wheel-drive Skid-steeri...

引用

2021 China Automation Congress, CAC 2021

作者： Xu, Yongkang Wang, Shoukun Zhao, Hongqiang Chen, Zhihua State Key Laboratory of Intelligent Control and Decision of Complex Systems Beijing Institute of Technology Beijing China State Key Laboratory of High Performance and Complex Manufacturing Central South University Changsha China

ISBN: (纸本)9781665426473

A speed consensus control strategy for a six-wheel-drive skid-steering mobile robot was proposed based on a hierarchical controller in a complex environment with unknown disturbances. The effective method of reliable speed consensus control strategy should consider some disturbances, such as the internal-robot assembly error, which including instability of motor control system and external physical interference in robot dynamic system. In this paper, a driving anti-slip control system with PID and the stability control system with sliding mode by variable structure is designed and integrated to elevate the stability of the robot. And, a G-vector control algorithm based on sliding mode control is proposed to reduce the yaw angle as much as possible during the process of differential steering of robots. The effectiveness of the proposed control strategy is verified by an example of a *** results show that the method has good control performance in control accuracy and stability. © 2021 IEEE

关键词： Motion control

来源：评论

学校读者我要写书评

暂无评论

Acoustically Driven Micropipette for Hydrodynamic Manipulation of Mouse Oocytes

Acoustically Driven Micropipette for Hydrodynamic Manipulati...

引用

IEEE International Conference on Robotics and Automation (ICRA)

作者： Zhaofeng Zuo Xiaoming Liu Zhuo Chen Yuyang Li Xiaoqing Tang Dan Liu Qiang Huang Tatsuo Arai Beijing Advanced Innovation Center for Intelligent Robots and Systems and School of Mechatronical Engineering Key Laboratory of Biomimetic Robots and Systems Ministry of Education State Key Laboratory of Intelligent Control and Decision of Complex System Beijing Institute of Technology Beijing China Center for Neuroscience and Biomedical Engineering The University of Electro-Communications Tokyo Japan

ISBN: (数字)9798350384574

ISBN: (纸本)9798350384581

Micromanipulation techniques that can achieve controlled fine operations at the micro scale play an important role in biomedical fields including embryo engineering, gene engineering, drug screening, and cell analysis. However, micromanipulation of biological micro-objects, such as cells and micro tissues, suffers from mechanical damage and low efficiency. Several techniques have been introduced to manipulate cells more easily, but most of them are restricted by expensive devices, limited work area, and potential damage to cellular structure. Here we develop a hydrodynamic manipulation method to rotate and transport mouse oocytes, which utilizes acoustic waves and micropipette to generate acoustic radiation force and excite microstreaming. This method can accomplish rotational and translational operations precisely and controllably. We tested the process of trapping, rotation, and transportation of the mouse oocytes, and measured rotational and translational speed with a range of applied voltage. The method was able to shorten the cost time of delivery and posture adjustment before oocyte injection. Our study provides an easy-to-use technique for oocyte manipulation without contact, and it has the potential to be universally applied in many cellular studies.

关键词： Visualization Voltage measurement Three-dimensional displays Force Transportation Hydrodynamics Biology

来源：评论

学校读者我要写书评

暂无评论

Vehicle Motion Prediction at Intersections Based on the Turning Intention and Prior Trajectories Model

引用

自动化学报（英文版） 2021年第10期8卷 1657-1666页

作者： Ting Zhang Wenjie Song Mengyin Fu Yi Yang Meiling Wang State Key Laboratory of Intelligent Control and Decision of Complex Systems Beijing Institute of TechnologyBeijing 100081 Nanjing University of Science and Technology Nanjing 210014China

Intersections are quite important and complex traffic scenarios, where the future motion of surrounding vehicles is an indispensable reference factor for the decision-making or path planning of autonomous vehicles. Considering that the motion trajectory of a vehicle at an intersection partly obeys the statistical law of historical data once its driving intention is determined, this paper proposes a long short-term memory based (LSTM-based) framework that combines intention prediction and trajectory prediction together. First, we build an intersection prior trajectories model (IPTM) by clustering and statistically analyzing a large number of prior traffic flow trajectories. The prior trajectories model with fitted probabilistic density is used to approximate the distribution of the predicted trajectory, and also serves as a reference for credibility evaluation. Second, we conduct the intention prediction through another LSTM model and regard it as a crucial cue for a trajectory forecast at the early stage. Furthermore, the predicted intention is also a key that is associated with the prior trajectories model. The proposed framework is validated on two publically released datasets, next generation simulation (NGSIM) and INTERACTION. Compared with other prediction methods, our framework is able to sample a trajectory from the estimated distribution, with its accuracy improved by about 20％. Finally, the credibility evaluation, which is based on the prior trajectories model, makes the framework more practical in the real-world applications.

关键词： Autonomous vehicle intersection motion prediction prior trajectories model turning intention

来源：评论

学校读者我要写书评

暂无评论

Distributed Online Convex Optimization with Time-Varying Constraints: Tighter Cumulative Constraint Violation Bounds under Slater's Condition

引用

IEEE Transactions on Automatic control 2025年

作者： Yi, Xinlei Li, Xiuxian Yang, Tao Xie, Lihua Hong, Yiguang Chai, Tianyou Johansson, Karl H. National Key Laboratory of Autonomous Intelligent Unmanned Systems Shanghai Institute of Intelligent Science and Technology China Ministry of Education Frontiers Science Center for Intelligent Autonomous Systems China Massachusetts Institute of Technology Lab for Information & Decision Systems CambridgeMA02139 United States Northeastern University State Key Laboratory of Synthetical Automation for Process Industries Shenyang110819 China Nanyang Technological University School of Electrical and Electronic Engineering 50 Nanyang Avenue 639798 Singapore Kth Royal Institute of Technology Division of Decision and Control Systems School of Electrical Engineering and Computer Science Sweden Digital Futures Stockholm10044 Sweden

This paper considers distributed online convex optimization with time-varying constraints. In this setting, a network of agents makes decisions at each round, and then only a portion of the loss function and a coordinate block of the constraint function are privately revealed to each agent. The loss and constraint functions are convex and can vary arbitrarily across rounds. The agents collaborate to minimize static network regret and network cumulative constraint violation. A novel distributed online algorithm with a vanishing stepsize is proposed and it achieves an O(Tmax {c,1-c}) static network regret bound and an O(T1-c/2) network cumulative constraint violation bound, where T is the number of rounds and c∈ (0,1) is a user-defined trade-off parameter. When Slater's condition holds (i.e, there is a point that strictly satisfies the inequality constraints), the network cumulative constraint violation bound is reduced to O(T1-c). Moreover, if the loss functions are strongly convex, then static network regret bound is reduced to O(log (T)), and the network cumulative constraint violation bound is reduced to O(√log (T)T) and O(log (T)) without and with Slater's condition, respectively. To the best of our knowledge, this paper is the first to achieve tighter (network) cumulative constraint violation bounds for (distributed) online convex optimization with time-varying constraints under Slater's condition. Finally, the theoretical results are verified through numerical simulations. © 1963-2012 IEEE.

关键词： Convex optimization

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：