检索结果-内蒙古大学图书馆

World Congress on intelligent control and Automation (WCICA)

作者： Xisong Dong Gang Xiong Wenwen Kang Fenghua Zhu State Key Laboratory of Management and Control for Complex Systems Chinese Academy of Sciences Beijing CO China Cloud Computing Center Chinese Academy of Sciences Dongguan CO China Qingdao Academy of Intelligent Industries Qingdao CO China Chinese Academy of Sciences Institute of Automation Beijing CO China

ISBN: (纸本)9781467384155

Transit signal priority (TSP) is the most effective method to improve the operational efficiency of public transports. This paper presents an adaptive dynamic TSP control method of public traffic, by adjusting the signal time to give buses passing priority at intersections, which can take into account not only the dynamic time of bus's reaching the intersections according to the actual road conditions, but also the benefit balance of priority and non-priority vehicles. This control method has been successfully piloted in BRT Line 1 in Guangzhou, China. The average BRT vehicles' travel time under each signal priority operation is reduced by about 34 seconds, and the average delay time is decreased about 10% while it causes only acceptable negative impact on non-priority social vehicles. These pilot results demonstrate the validity and effectiveness of the control algorithm.

关键词： Vehicles Vehicle dynamics Roads Automation Delays Green products Detectors

来源：评论

学校读者我要写书评

暂无评论

Coordinated Transportation of a Group of Unmanned Ground Vehicles

Coordinated Transportation of a Group of Unmanned Ground Veh...

引用

第三十四届中国控制会议

作者： Yunpeng Wang Long Cheng Zeng-Guang Hou Min Tan Hongnian Yu State Key Laboratory of Management and Control for Complex Systems Institute of Automation Chinese Academy of Sciences State Key Laboratory of Intelligent Control and Decision of Complex Systems Beijing Institute of Technology Faculty of Science and Technology Bournemouth University

ISBN: (纸本)9781467374439

This paper studies a coordinated transportation problem of a group of unmanned ground vehicles(UGVs). These ground vehicles belong to two categories: master vehicles and slave vehicles. A two-step strategy is proposed to solve this problem. First, let the master vehicles move along ideal trajectories. Then, let the slave vehicles move into the area surrounded by master vehicles and move together with them. By the two-step strategy, the coordinated transportation problem is divided into a tracking problem and a containment problem. A P In-type tracking protocol and a P In-type containment protocol(P and I stand for Proportion and Integration, respectively;Inimplies that the protocol includes high-order integral terms) are proposed to solve these two problems. It is proved that the coordinated transportation problem can be solved by two proposed protocols with proper parameters if for each follower there exists at least one leader which has a directed path to this follower. Finally, a simulation example is presented to demonstrate the effectiveness of the proposed algorithms.

关键词： Coordinated transportation,Polynomial trajectory,Containment control,Multi-agent system.

来源：评论

学校读者我要写书评

暂无评论

A survey on big data for human body shape

A survey on big data for human body shape

引用

IEEE International Conference on Service Operations and Logistics, and Informatics, SOLI

作者： Hongli Peng Xiuqin Shang Chao Guo Gang Xiong Timo R. Nyberg Dong Fan Yiming Wang The State Key Laboratory of Management and Control for Complex Systems Chinese Academy of Sciences Beijing China College of Information Science and Technology Beijing University of Chemical Technology Beijing China Qingdao Academy of Intelligent Industries Qingdao China Beijing Engineering Research Center of Intelligent Systems and Technology Chinese Academy of Sciences Beijing China Cloud Computing Center Chinese Academy of Sciences China Guangdong Department of Industrial Engineering and Management Aalto University Finland SBoleni Intelligent Solutions Technology (SuZhou) Co. Ltd Joint Laboratory of Intelligent IoT & Cloud for Parallel Management & Control Suzhou China

ISBN: (纸本)9781509029280

In recent years, the rapid development of network and E-commerce technologies, promotes the development of human body big data. New technologies, such as 3D scanning and 3D printing will improve our life quality. The new socialized manufacturing network composed of IoT, advanced logistics network and 3D printers. Everyone is allowed to have chance to participate in any process of the whole production manufacturing lifecycle by some ways, such as crowdsourcing. Boosts the creation, production and consumption patterns of individuation, real-time transformation and E-commerce, possibly will lead to a new industrial revolution. In this revolutionary change wave, public concerns focus on the human body big data used for social manufacturing of wearable products or personalized medical treatment. Although many scholars have done a lot of research work, the collection of the human body shape big data still faces many challenges. There is no complete, separated theoretical research works in progress, it should be summarized and improved systematically. In this paper, we review that big data for human body shape is gaining momentum. The 3D scanning and 3D modeling of human body shape are summarized and concluded. The main applications of these big data are analyzed.

关键词： Three-dimensional displays Feature extraction Shape Biological system modeling Solid modeling Computational modeling Data models

来源：评论

学校读者我要写书评

暂无评论

A Survey on Big Data for Human Body Shape

A Survey on Big Data for Human Body Shape

引用

2016年IEEE/INFORMS服务运筹、物流与信息化国际会议

作者： Hongli Peng Xiuqin Shang Chao Guo Gang Xiong Timo R.Nyberg Dong Fan Yiming Wang The State Key Laboratory of Management and Control for Complex Systems Institute of AutomationChinese Academy of Sciences College of Information Science and Technology Beijing University of Chemical Technology Qingdao Academy of Intelligent Industries Beijing Engineering Research Center of Intelligent Systems and Technology Institute of AutomationChinese Academy of Sciences Cloud Computing Center Chinese Academy of Sciences Department of Industrial Engineering and Management School of ScienceAalto University

In recent years, the rapid development of network and E-commerce technologies, promotes the development of human body big data. New technologies, such as 3D scanning and 3D printing will improve our life quality. The new socialized manufacturing network composed of Io T, advanced logistics network and 3D printers. Everyone is allowed to have chance to participate in any process of the whole production manufacturing lifecycle by some ways, such as crowdsourcing. Boosts the creation, production and consumption patterns of individuation, real-time transformation and E-commerce, possibly will lead to a new industrial revolution. In this revolutionary change wave, public concerns focus on the human body big data used for social manufacturing of wearable products or personalized medical treatment. Although many scholars have done a lot of research work, the collection of the human body shape big data still faces many challenges. There is no complete, separated theoretical research works in progress, it should be summarized and improved systematically. In this paper, we review that big data for human body shape is gaining momentum. The 3D scanning and 3D modeling of human body shape are summarized and concluded. The main applications of these big data are analyzed.

关键词： big data human body shape 3D scanning 3D modeling clothing footwear mass customization

来源：评论

学校读者我要写书评

暂无评论

The Application of the Depth Camera in the Social Manufacturing: A review

The Application of the Depth Camera in the Social Manufactur...

引用

2016年IEEE/INFORMS服务运筹、物流与信息化国际会议

作者： Zhen Liang Ni Zhen Shen Chao Guo Gang Xiong Timo R.Nyberg Xiuqin Shang Shuangshuang Li Yiming Wang The State Key Laboratory of Management and Control for Complex Systems Institute of AutomationChinese Academy of Sciences College of Information Science and Technology Beijing University of Chemical Technology Cloud Computing Center Chinese Academy of Sciences Qingdao Academy of Intelligent Industries Beijing Engineering Research Center of Intelligent Systems and Technology Institute of AutomationChinese Academy of Sciences Department of Industrial Engineering and Management School of ScienceAalto University

In recent years, the Information Technology develops rapidly. With the development of the Information Technology, the social manufacturing, a new mode of manufacturing, has been proposed. The social manufacturing combines the Internet technology, the three-dimensional scanning technology and the virtual reality technology, and is used in the apparel industry and other fashion industries for the mass customization. The three-dimensional scanning technology and the virtual fitting mirror technology are inseparable from the depth camera. Depth cameras play an important role in the social manufacturing. Manufacturers use depth cameras to obtain three-dimensional models of the body of customers to design suitable clothes. Customers can visually see the effect of clothes by using a virtual fitting mirror which is based on the depth camera. The social manufacturing makes mass customization possible, and the depth camera help develop the social manufacturing. This paper introduces the principles of depth cameras, and the application of depth cameras in the social manufacturing.

关键词： social manufacturing depth camera PMD Kinect time of flight structured light

来源：评论

学校读者我要写书评

暂无评论

Public Service Management System of Urban Placenames for Sanya Case

Public Service Management System of Urban Placenames for San...

引用

2016年IEEE/INFORMS服务运筹、物流与信息化国际会议

作者： Wei Liu Fenghua Zhu Xisong Dong Gang Xiong Yongqiang Zhu Huazhou Wu Taozhong Liu Yuexiang Hu The State Key Laboratory of Management and Control for Complex Systems Institute of AutomationChinese Academy of Sciences College of Information Science and Technology Beijing University of Chemical Technology Beijing Engineering Research Center of Intelligent Systems and Technology Institute of AutomationChinese Academy of Sciences Dongguan Research Institute of CASIA Cloud Computing CenterChinese Academy of Sciences Instituteof Smart Education Systems Qingdao Academy of Intelligent Industries Xiamen Kingtopinfo Technology Co.Ltd

The rapidly growing amount of social interaction makes geographical names an important and indispensable medium for people in social and economic exchanges. Especially in today's information age, the frequency of usage of name information has increased greatly. In this paper, a method for the construction of a cities' names database is proposed. This will include the processing of the outcome data from the names pilot survey, the consolidation into the database, the development of the cloud service and management system based on the geographical names and zoning database, and the construction of a relatively complete set of the public service system of geographical names based on a website and touch screen interface. The method has been applied in San Ya, China successfully, and very good results have been obtained. The platform can provide not only accurate and convenient services of geographical names, but also promote its economic development and social progress.

关键词： Public service system geographical names geographical names database cloud service platform

来源：评论

学校读者我要写书评

暂无评论

Social Manufacturing Development with Sino-Finnish Innovation Cooperation

Social Manufacturing Development with Sino-Finnish Innovatio...

引用

2016年IEEE/INFORMS服务运筹、物流与信息化国际会议

作者： Jian Liu Gang Xiong Xiuqin Shang Timo R.Nyberg Yiming Wang Tongkai Ji The State Key Laboratory of Management and Control for Complex Systems Institute of AutomationChinese Academy of Sciences College of Information Science and Technology Beijing University of Chemical Technology Cloud Computing Center Chinese Academy of Sciences Department of Industrial Engineering and Management School of ScienceAalto University Beijing Engineering Research Center of Intelligent Systems and Technology Institute of AutomationChinese Academy of Sciences

Innovation is changing the world every day by offering new technical solutions for the society, and the technology development powered by innovation has been changing the operation and structure of traditional manufacturing. Social manufacturing is the new trend of manufacturing development, especially in the field of apparel industry. Social manufacturing can create opportunities for customers to participate in the produce process of tailoring, and to make more personalizing clothes, which will also benefit for the related companies' brand making process. With the assistance of internet technology and industry globalization, we can establish several modes about the trend of social manufacturing and new related technology, social manufacturing can also prompt the international division of labor by reducing the producing costs and enlarging the market capacity, we will analyze the advance of Sino-Finland cooperation in the field of innovation and apparel industry, the international cooperation in manufacturing industry will benefit both customers and industry revolution with the assistance of social manufacturing.

关键词： social manufacturing innovation apparel industry international cooperation

来源：评论

学校读者我要写书评

暂无评论

Near Minimum-Time Feedback Attitude control with Multiple Saturation Constraints for Satellites

Near Minimum-Time Feedback Attitude Control with Multiple Sa...

引用

第三十四届中国控制会议

作者： Xing Xin Zhen Li Xiangdong Liu Zhen Chen School of Automation Beijing Institute of Technology Key Laboratory for Intelligent Control & Decision on Complex Systems Beijing Institute of Technology

ISBN: (纸本)9781467374439

A near minimum time feedback control law is proposed for the agile satellite attitude control system. The real time controller is formed by specially designed cascaded subunits. Based on this, the rapid attitude maneuvering can be applied in tasks including the move to move case. The near optimal property of that is guaranteed by the rapid dynamic response with a modified bang-bang control logic while simultaneously ensuring non-saturation properties on 3-Axis. The near optimal method is utilized for an online attitude planning, and the generated attitude maneuver path in real time is tracked by a nonlinear back-stepping controller with its improved dynamic performance and by which the united closed loop control is *** simulations are conducted to verify the effectiveness of the proposed control strategy.

关键词： Attitude control,agile satellites,saturation control,back-stepping

来源：评论

学校读者我要写书评

暂无评论

Collision-free and kinematically feasible path planning along a reference path for autonomous vehicle

Collision-free and kinematically feasible path planning alon...

引用

IEEE Symposium on intelligent Vehicle

作者： Mengyin Fu Kai Zhang Yi Yang Hao Zhu Meiling Wang Key Laboratory of Intelligent Control and Decision of Complex Systems Beijing Institute of Technology Beijing P.R.China

For the local path planning problem of autonomous vehicle in a complicated environment, a method combining cubic hermite spline curves with the kinematic model of autonomous vehicle is developed. And a novel algorithm for obstacle avoidance, called navigation circle, is proposed to take the road structure into account, which is a practical method for real-time path planning. In the new method, one of the trajectory generated by cubic hermite spline curves or navigation circle is optimized through the kinematic model of autonomous vehicle to get the kinematically feasible trajectory. The optimization is actually a numerical forward propagation and is easy to implement. The simulation experiment is conducted on the Robot Operating System (ROS) platform, which is based on replaying the data of the real world obtained from sensors or other modules on autonomous vehicle. Satisfactory simulation results verify the validity and the efficiency of the proposed method as well as the planner's capability to navigate in a realistic scenario.

关键词： Trajectory Vehicles Splines (mathematics) Navigation Mobile robots Planning

来源：评论

学校读者我要写书评

暂无评论

Sliding mode control based guidance law with impact angle constraint

引用

Chinese Journal of Aeronautics 2014年第1期27卷 145-152页

作者： Zhao Yao Sheng Yongzhi Liu Xiangdong School of Automation Beijing Institute of Technology Key Laboratory for Intelligent Control & Decision of Complex Systems Beijing Institute of Technology

The terminal guidance problem for an unpowered lifting reentry vehicle against a sta- tionary target is considered. In addition to attacking the target with high accuracy, the vehicle is also expected to achieve a desired impact angle. In this paper, a sliding mode control （SMC）-based guidance law is developed to satisfy the terminal angle constraint. Firstly, a specific sliding mode function is designed, and the terminal requirements can be achieved by enforcing both the sliding mode function and its derivative to zero at the end of the flight. Then, a backstepping approach is used to ensure the finite-time reaching phase of the sliding mode and the analytic expression of the control effort can be obtained. The trajectories generated by this method only depend on the initial and terminal conditions of the terminal phase and the instantaneous states of the vehicle. In order to test the performance of the proposed guidance law in practical application, numerical simulations are carried out by taking all the aerodynamic parameters into consideration. The effec- tiveness of the proposed guidance law is verified by the simulation results in various scenarios.

关键词： Backstepping Impact angle Sliding mode control Terminal guidance Unpowered lifting reentryvehicle

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：