检索结果-内蒙古大学图书馆

2nd IEEE International Power Electronics and Application Symposium, PEAS 2023

作者： Kang, Jiahua Dong, Wei Xu, Jinming Diao, Hanxu Lv, Zhenhua Xie, Shaojun College of Automation Engineering Nanjing University of Aeronautics and Astronautics Nanjing China China Electric Power Research Institute State Key Laboratory of Operation and Control of Renewable Energy & Storage Systems Beijing China State Grid Jiangsu Electric Power Co. LTD. Research Institute Nanjing China

ISBN: (纸本)9798350313765

In practical applications, the photovoltaic and energy storage (PV&ES) system can reduce grid-connected power fluctuations and help solve the problems caused by the large amount of distributed photovoltaic generation connected to the grid. However, the presence of non-ideal factors such as rich voltage harmonics and large grid impedance in the grid may lead to the destabilization of the PV&ES system, so analyzing the stability of the PV&ES system under complex grid is needed. The emphasis of this paper is on the modeling and stability analysis of the PV&ES system. The accurate model is established by using the harmonic linearization, and stability analysis under different grid impedances is carried out using impedance analysis. As proved, the PV&ES system has better stability under weak grid, but poor stability under strong grid with lower phase margin. Based on this, a virtual resistance-based method for improving the PV&ES system output impedance characteristics is proposed to achieve better stability under different grid impedance conditions. The validity and feasibility of the above analysis are confirmed through simulation of three-phase grid-connected inverters prototype. © 2023 IEEE.

关键词： frequency coupling impedance modeling photovoltaic and energy storage system (PV&ES) weak grid

来源：评论

学校读者我要写书评

暂无评论

A Primal-Dual SGD Algorithm for Distributed Nonconvex Optimization

引用

IEEE/CAA Journal of Automatica Sinica 2022年第5期9卷 812-833页

作者： Xinlei Yi Shengjun Zhang Tao Yang Tianyou Chai Karl Henrik Johansson Division of Decision and Control Systems School of Electrical Engineering and Computer ScienceKTH Royal Institute of Technologyand also affiliated with the Digital FuturesStockholm 10044Sweden Department of Electrical Engineering University of North TexasDentonTX 76203 USA IEEE State Key Laboratory of Synthetical Automation for Process Industries Northeastern UniversityShenyang 110819China

The distributed nonconvex optimization problem of minimizing a global cost function formed by a sum of n local cost functions by using local information exchange is *** problem is an important component of many machine learning techniques with data parallelism,such as deep learning and federated *** propose a distributed primal-dual stochastic gradient descent(SGD)algorithm,suitable for arbitrarily connected communication networks and any smooth(possibly nonconvex)cost *** show that the proposed algorithm achieves the linear speedup convergence rate O(1/(√nT))for general nonconvex cost functions and the linear speedup convergence rate O(1/(nT)) when the global cost function satisfies the Polyak-Lojasiewicz(P-L)condition,where T is the total number of *** also show that the output of the proposed algorithm with constant parameters linearly converges to a neighborhood of a global *** demonstrate through numerical experiments the efficiency of our algorithm in comparison with the baseline centralized SGD and recently proposed distributed SGD algorithms.

关键词： Distributed nonconvex optimization linear speedup Polyak-Lojasiewicz(P-L)condition primal-dual algorithm stochastic gradient descent

来源：评论

学校读者我要写书评

暂无评论

A Finite-Time Posture control Strategy for the Swarm Underactuated Robots 5th

A Finite-Time Posture Control Strategy for the Swarm Under...

引用

5th Chinese Conference on Swarm Intelligence and Cooperative control, CCSICC 2021

作者： Huang, Zixin Qin, Xiangyu Wei, Shaoqi Wang, Lejun Hubei Key Laboratory of Intelligent Robot Wuhan Institute of Technology Wuhan430205 China Hubei Key Laboratory of Digital Textile Equipment Wuhan Textile University Wuhan430200 China School of Electrical and Information Engineering Wuhan Institute of Technology Wuhan430205 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan430074 China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan430074 China

ISBN: (纸本)9789811939976

Under the background of industrial machinery automation. The swarm robots are required to cooperate to complete complex and accurate works in finite-time and create more relative residual value. Based on the inherent advantages of underactuated robot, the research of finite time posture control strategy has higher theoretical and practical value. Firstly, the dynamic model of a single Pendubot of planar swarm underactuated robots was built. However, the robots reach to the same objective from different initial states and keep being at the same posture, so it was necessary to plan a feasible trajectory. Then, the planned trajectory parameters are optimized to make the underactuated robots relized the objectives in finite time. Finally, an unified tracking controller is designed for the underactuated robots. Simulation results of the swarm underactuated robots demonstrated the effectiveness of the proposed control strategy. © 2023, The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.

关键词： Robots

来源：评论

学校读者我要写书评

暂无评论

Path Following and Collision Avoidance of a Ribbon-Fin Propelled Underwater Biomimetic Vehicle-Manipulator System

SSRN

引用

SSRN 2022年

作者： He, Yanbing Dong, Xiang Wang, Yu Wang, Shuo Cheng, Long School of Electrical Engineering and Automation Anhui University Hefei230601 China State Key Laboratory of Management and Control for Complex Systems Institute of Automation Chinese Academy of Sciences China

This paper addresses the problem of path following and dynamic obstacle avoidance for underwater biomimetic vehicle-manipulator system (UBVMS). Firstly, the general kinematics and dynamics models of underwater vehicles are presented;then a nonlinear model predictive control (NMPC) scheme is employed to track a reference path and collision avoidance simultaneously. Moreover, to minimize the tracking error and a higher degree of robustness, improved extended state observers are used to estimate model uncertainties and disturbances to be fed into the NMPC prediction model. On top of this, the proposed method also considers the uncertainty of the state estimator, while combining a priori estimation of the Kalman filter to reasonably predict the position of dynamic obstacles during short periods. Finally, simulations and experimental results are carried out to assess the validity of the proposed method in case of disturbances and constraints. © 2022, The Authors. All rights reserved.

关键词： Vehicles

来源：评论

学校读者我要写书评

暂无评论

Robust control of Feeding Speed for Coal Mine Tunnel Drilling Machines 25

Robust Control of Feeding Speed for Coal Mine Tunnel Drillin...

引用

25th IEEE International Conference on Industrial Technology, ICIT 2024

作者： Liu, Xiao Chen, Luefeng Wu, Min Cao, Weihua Lu, Chengda Pedrycz, Witold School of Automation China University of Geosciences Wuhan China School of Automation The Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems The Engineering Research Center of Intelligent Technology for Geo-Exploration Wuhan430074 China University of Alberta Department of Electrical and Computer Engineering EdmontonABT6G 2R3 Canada Systems Research Institute Polish Academy of Sciences Warsaw00-901 Poland Istinye University Department of Computer Engineering Sariyer Istanbul34396 Turkey

Changes in coal seam hardness cause fluctuations in the feed resistance at the drill bit during the drilling process, leading to unstable feeding speed. This paper proposes a robust dynamic output feedback controller to suppress disturbances caused by the variations in coal seam hardness in the feed system. Firstly, an unknown parameter measuring coal seam hardness is introduced, and an uncertain model of the feeding system is established based on the finite element model of the drill string. By designing weighted functions based on industrial field requirements and constructing a generalized plant, the controller achieves loop shaping, reducing the low-frequency impact of coal seam hardness variations on the feed system and suppressing the systems resonance peak. Simulation results demonstrate that the controller effectively suppresses parameter variations and external disturbances caused by changes in coal seam hardness, achieving stable control of the drilling speed. © 2024 IEEE.

关键词： Robust control

来源：评论

学校读者我要写书评

暂无评论

A Collaborative Robot Torque Prediction Method Based on CNN-TCN Model

A Collaborative Robot Torque Prediction Method Based on CNN-...

引用

IEEE International Conference on Real-time Computing and Robotics (RCAR)

作者： Lina Tong Decheng Cui Chen Wang Liang Peng School of Mechanical Electronic and Information Engineering China University of Mining and Technology Beijing Beijing China State Key Laboratory of Management and Control for Complex Systems (SKLMCCS) Institute of Automation Chinese Academy of Science Beijing China

The traditional dynamical models show lower accuracy when predicting joint movement, and should be compensated. This paper proposed a model combined with the convolutional network(CNN) and temporal convolutional network(TCN) to compensate for the joint torque prediction values that are calculated from the sensing information. The experiments on the Cooperative Universal Robotic Assistant 6 DoF(CURA6) open dataset, including multi-load and multi-velocity, showed the prediction error can be reduced by 20% compared to other network models. Since there are many kinds of joint movement information, the input data form of the deep learning model should be improved. Thus, the kinetic linearization model is proposed to modify the input of sensing data. According to the different motion types of the CURA6 dataset, comparative experiments were taken, and the mean absolute error was less than 6.8%.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Learning Pre-Grasp Manipulation of Flat Objects in Cluttered Environments using Sliding Primitives

Learning Pre-Grasp Manipulation of Flat Objects in Cluttered...

引用

IEEE International Conference on Robotics and automation (ICRA)

作者： Jiaxi Wu Haoran Wu Shanlin Zhong Quqin Sun Yinlin Li State Key Laboratory of Turbulence and Complex Systems Intelligent Biomimetic Design Lab College of Engineering Peking University Beijing China Department of Automation University of Science and Technology of China Heifei China State Key Laboratory of Management and Control for Complex System Institute of Automation Chinese Academy of Science Beijing China Science and Technology on Thermal Energy and Power Laboratory Wuhan China

Flat objects with negligible thicknesses like books and disks are challenging to be grasped by the robot because of the width limit of the robot's gripper, especially when they are in cluttered environments. Pre-grasp manipulation is conducive to rearranging objects on the table and moving the flat objects to the table edge, making them graspable. In this paper, we formulate this task as Parameterized Action Markov Decision Process, and a novel method based on deep reinforcement learning is proposed to address this problem by introducing sliding primitives as actions. A weight-sharing policy network is utilized to predict the sliding primitive's parameters for each object, and a Q-network is adopted to select the acted object among all the candidates on the table. Meanwhile, via integrating a curriculum learning scheme, our method can be scaled to cluttered environments with more objects. In both simulation and real-world experiments, our method surpasses the existing methods and achieves pre-grasp manipulation with higher task success rates and fewer action steps. Without fine-tuning, it can be generalized to novel shapes and household objects with more than 85% success rates in the real world. Videos and supplementary materials are available at https://***/view/pre-grasp-sliding.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Differential Steering control for 6 × 6 Wheel-drive Mobile Robot 26

Differential Steering Control for 6 × 6 Wheel-drive Mobile ...

引用

26th International Conference on automation and Computing, ICAC 2021

作者： Zhao, Hongqiang Luo, Chao Xu, Yongkang Li, Jiehao Central South University State Key Laboratory of High Performance Complex Manufacturing School of Mechanical and Electrical Engineering ChangSha China Beijing Institute of Technology State Key Laboratory of Intelligent Control and Decision of Complex Systems School of Automation Beijing China

ISBN: (纸本)9781860435577

The 6 × 6 Wheel-drive mobile robot is widely used in the field of special operations, and there is the phenomenon of slipping in the process of steering. To study the steering accuracy and stability of mobile robot, the dynamic model of 6 × 6 Wheel-drive Mobile Robot is established, and the sliding mode control strategy of differential steering based on mobile robot is proposed. Firstly, taking the torque of six wheels and the operator's direction control as input, the three-dimensional attitude and the relative position of the steering center of the mobile robot are obtained by using the position and attitude sensor, to determine the reference steering angle of the mobile robot. Secondly, considering the relationship between the position error and the velocity error, a recursive sliding surface is designed, and a neural network is introduced to approach the uncertain part of the mobile robot model. Then, a nonlinear gain function is applied to construct a dynamic surface control law. Finally, through the Trucksim/Simulink co-simulation model, the nonlinear gain recursive sliding mode dynamic surface adaptive control method for mobile robot trajectory tracking can improve the tracking speed and control precision, and the control force and torque are smooth and reasonable. The results show that the method is effective in improving the steering accuracy and stability of mobile robot. © 2021 Chinese automation and Computing Society in the UK-CACSUK.

关键词： Mobile robots

来源：评论

学校读者我要写书评

暂无评论

Signal Detection Method Based on Social Relationship Strength in Vehicular Ad-hoc Networks ⁎

引用

IFAC-PapersOnLine 2024年第10期58卷 176-181页

作者： Yi Li Shuangshuang Han Yongqiang Bai Fei-Yue Wang School of Computer and Communication Engineering University of Science and Technology Beijing Beijing China and Key Laboratory of Ocean Observation Technology MNR Tianjin China School of Computer and Communication Engineering University of Science and Technology Beijing Beijing China and Beijing Huairou Academy of Parallel Sensing Beijing China The State Key Laboratory for Management and Control of Complex Systems Institute of Automation Chinese Academy of Sciences Beijing China

In the case of scarce communication resources, the importance of different vehicle communication levels is self-evident. They not only affect the efficiency of information exchange between vehicles and driving safety, but also directly affect the rational allocation and utilization of communication resources. Therefore, this paper proposes a signal detection method based on vehicle social relationship strength (SRS) in vehicular ad-hoc networks (VANETs) scenario, and integrates the SRS information into the data to be transmitted. In this method, minimum mean square error (MMSE) signal detection algorithm is selected for simulation, and Rayleigh channel and Rician channel are selected for simulation scenarios. This method makes full use of the intensity of social relationship between vehicles, and realizes the efficient transmission of data and the accurate transmission of communication level. Experimental verification shows that the method performs well in the VANETs scenario, and provides a new communication method for intelligent transportation, social network and other applications, which is expected to promote the technical progress and application development in related fields.

关键词： VANETs Social relation strength Image data transmission MMSE detection Intelligent transportation Social networking

来源：评论

学校读者我要写书评

暂无评论

Human-Robot Pose Tracking Based on CNN with Color and Geometry Aggregation 16th

Human-Robot Pose Tracking Based on CNN with Color and Geo...

引用

16th International Conference on Social Robotics, ICSR + InnoBiz 2024

作者： Xu, Yue Zhang, Yinlong Liu, Shuai Liu, Yuanhao Liang, Wei He, Hongsheng Shenyang University of Technology Shenyang110020 China Guangzhou Institute of Industrial Intelligence Guangzhou511458 China State Key Laboratory of Robotics Shenyang Institute of Automation Chinese Academy of Sciences Shenyang110016 China Key Laboratory of Networked Control Systems Chinese Academy of Sciences Shenyang110016 China University of Chinese Academy of Sciences Beijing100049 China Department of Computer Science The University of Alabama TuscaloosaAL35487 United States

ISBN: (纸本)9789819611508

Accurately tracking the robotic arm and human joints is crucial to ensure safety during human-robot interaction. However, traditional pose tracking methods often exhibit insufficient performance and robustness in complex environments. The variations in the robotic arm’s environment and posture make it challenging for traditional methods to accurately capture the positions and posture of its joints. Specifically, when addressing challenges such as high similarity, occlusion, background complexity, and joint recognition failures, they often struggle to provide reliable and accurate results. To address these challenges, this paper proposes a human-robot pose tracking algorithm based on a new convolutional neural network model. To enhance detection accuracy, an improved color detection module is introduced to resolve joint misclassification. A geometric perception module is designed to accurately locate joints even under occlusion. Additionally, innovative iEMA and DBB modules are incorporated. The iEMA module employs edge detection technology to dynamically adjust thresholds for correct matching by improving the edge matching process. The DBB module refines the boundary box parameters for precise localization by introducing adaptive bounding box updates in real-time. This algorithm also integrates human pose recognition, enabling real-time pose recognition, thereby facilitating more intelligent and natural human-robot interaction. The algorithm has been rigorously evaluated on a custom-designed robotic arm platform. Experimental results validate the algorithm’s effectiveness and feasibility. © The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd. 2025.

关键词： Robotic arms

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：