检索结果-内蒙古大学图书馆

Mechanical Response and Superelastic Properties of Cu-11.85Al-3.2Mn-0.1Ti TPMS Structures Printed by Laser Powder Bed Fusion

引用

Chinese Journal of Mechanical Engineering 2025年第1期38卷 17-30页

作者： Mingzhu Dang Honghao Xiang Jingjing Li Chunsheng Ye Chao Cai Qingsong Wei State Key Laboratory of Material Processing and Die&Mould Technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan 430074HubeiChina

Triply periodic minimal surfaces(TPMS)are structures with smooth surfaces and excellent energy absorption *** new functional materials,such as shape memory alloys,with TPMS structures provides a novel and promising research *** this study,three TPMS structures(Gyroid,Diamond,and Primitive)of Cu-11.85Al-3.2Mn-0.1Ti alloy were printed by laser powder bed fusion,which is favorable for the fabrication of complex *** manufacturing fidelity,mechanical response,and superelastic properties of the three structures were *** distributions in the three structures during compression were analyzed by finite element(FE)*** three structures were equipped with high-quality,glossy surfaces and uniform ***,due to powder adhesion and forming steps,there were volumetric errors and dimensional deviations between the samples and the CAD *** errors were within 1.6%for the Gyroid and Diamond *** dimensional deviations at the nodes in the three structures were less than 0.09 *** microstructures of all structures wereβ1´martensite,consistent with the cubic *** results of compression showed that the structures underwent a layer-by-layer compression failure mode,and the Primitive structures exhibited a more pronounced oscillatory *** Diamond structures showed the highest first fracture stress and strain of 164.67 MPa and 13.89%,*** also possessed the lowest yield strength(61.97 MPa)and the best energy absorption properties(7.6 MJ/m3).Through the deformation analysis,the Gyroid and Diamond structures were found to fracture at a 45°direction,while the Primitive structures fractured *** findings were consistent with the results obtained from the FE simulation,which showed equivalent stress *** applying various pre-strains,the Diamond structures displayed the highest superelastic strain of up to 3.53%.The superelastic recovery of all samples r

关键词： Laser powder bed fusion Shape memory alloy Triply periodic minimal surfaces Mechanical response Energy absorption

来源：评论

学校读者我要写书评

暂无评论

Topologically close-packed intermetallic alloy electrocatalysts for CO_(2) reduction towards high value-added multi-carbon chemicals

引用

Chinese Chemical Letters 2025年第1期36卷 6-7页

作者： Qiyan Wu Qing Li State Key Laboratory of Materials Processing and Die&Mould Technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan 430074China

The continuous combustion of unsustainable carbon-based fossil fuels has dramatically accelerated the increase in carbon dioxide(CO_(2))concentration in the atmosphere(from approximately278.3 ppm in 1750 to 417.9 ppm in 2023),which would exacerbate environmental problems such as greenhouse effect[1].The effective electrosynthesis of high value-added multi-carbon(C_(2+))chemicals(e.g.,ethanol,ethylene)from CO_(2) reduction reaction(CO_(2)RR)is a promising strategy to mitigate these environmental issues mentioned above but remains highly challenging due to the competition of hydrogen evolution reaction(HER)and low selectivity of target products.

关键词： intermetallic alloy carbon

来源：评论

学校读者我要写书评

暂无评论

Oxygen vacancies-rich TiO_(2-x) enhanced composite polyurethane electrolytes for high-voltage solid-state lithium metal batteries

引用

Nano Research 2025年第4期18卷 228-237页

作者： Xiaoning Xu Fei Pei Wenjie Lin Jia Lei Yuhan Yang Henghui Xu Zhen Li Yunhui Huang State Key Laboratory of Materials Processing and Die&Mould Technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan 430074China Dongfeng Motor Corporation Research&Development Institute Wuhan 430058China

Due to the favorable interfacial stability with electrodes,excellent processability,and reasonable material cost,organic-inorganic composite solid-state electrolytes have attracted broad interests in the field of solid-state *** this study,we have developed a solid-state composite electrolyte with polyurethane(PU)as polymer matrix and TiO_(2-x) as nanofiller(denoted as PUL-TiO_(2-x)).The block copolymer PU features alternating soft and hard segments,which offers distinct advantages due to its unique structural *** soft segment of the block copolymer facilitates the dissociation of lithium salt,enabling the conduction of Li^(+),while the rich hydrogen bond network formed by the hard segment ensures the mechanical strength of the *** profusion of Lewis acid sites on the TiO_(2-x) surface facilitates interactions with ether oxygen groups and bistrifluoromethanesulfonimide(TFSI-)anions,thereby enhancing ionic conductivity(σ)and expanding the electrochemical stability window of the ***,the PUL-TiO_(2-x) electrolyte exhibits an impressiveσof 2.19×10^(-4) S·cm^(-1) at 40℃,a Li^(+)transference number of 0.47,and an electrochemical stability window of 4.98 *** resulting LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)||Li battery demonstrates a specific capacity of 171 mAh·g^(-1) and exhibits excellent cycling stability,maintaining its performance over 270 cycles at 40℃.These findings underscore the immense potential of the PUL-TiO_(2-x) in advancing the development of high-performance all-solid-state lithium batteries.

关键词： polyurethane electrolyte composite polymer electrolytes high-voltage cathodes solid-state lithium metal batteries

来源：评论

学校读者我要写书评

暂无评论

Enhanced electrochemical corrosion resistance of 316L stainless steel manufactured by ultrasonic rolling assisted laser directed energy deposition

引用

China Foundry 2025年第2期22卷 182-194页

作者： Guan Liu Yi-gui Su Xu-yu Pi Dong-xu Wen De-fu Liu Yong-cheng Lin School of Mechanical and Electrical Engineering Central South UniversityChangsha 410083China State Key Laboratory of Materials Processing and Die&Mould Technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan 430074China

Under the laser directed energy deposition(LDED)process,the rapid melting and solidification usually lead to the emergence of pores and coarse columnar dendrites,which in turn compromise the properties of the deposited *** study introduced in-situ ultrasonic rolling(UR)as an innovative method to enhance the corrosion resistance of LDED specimens,and the microstructural characteristics and their correlation with corrosion resistance were deeply *** findings reveal that the LDED-UR specimen exhibits a reduction in both the fraction and size of *** the influence of severe plastic deformation generated by LDED-UR process,fully equiaxed grains appear with a reduced average size of 28.61μm(compared to63.98μm for the LDED specimen with columnar grains).The electrochemical corrosion resistance of the LDED-UR specimen is significantly enhanced compared to the LDED *** enhanced corrosion resistance can be attributed to the low fraction of small-sized pores,the fine and uniformly distributed Cr-enriched ferrite phase,and the formation of a compact and thick passive film due to dense grain *** insight of the correlation between microstructure and corrosion behavior opens up a new pathway to enhance the corrosion resistance of LDED specimens.

关键词： laser directed energy deposition ultrasonic rolling 316L stainless steel microstructure electrochemical corrosion resistance

来源：评论

学校读者我要写书评

暂无评论

Flexible polyvinylidene fluoride/multiwall carbon nanotube-based thermoelectric composite films with excellent environmental stability and enhanced power factor from ferroelectric polarization

引用

Science China materials 2025年第4期68卷 1240-1248页

作者： Qinghui Jiang Zhenxiang Yu Xinyue Zhang Shanliang Chen Jitao Yi Yong Liu State Key Laboratory of Materials Processing and Die and Mould Technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan 430074China Foshan(Southern China)Institute for New Materials Foshan 528220China

Flexible thermoelectric(TE)films and devices have potential applications in wearable technology and the Internet of *** of the main challenges is how to simultaneously achieve good TE performance and high chemical/thermal stability in air with low cost and large-scale *** address this,we utilized tape casting to fabricate composite films of polyvinylidene fluoride(PVDF)and multi-walled carbon nanotubes(MWCNTs).In the composite,polarβ-PVDF introduced by hot pressing can decouple the electrical conductivity and Seebeck coefficient and significantly lead to enhanced power factor of MWCNTs/PVDF composite *** a result,the MWCNTs(60 wt%)/PVDF film has a power factor of 1.1-1.4µW m^(-1) K^(-2) near room *** film also has excellent flexibility and stability in the *** power factor is decreased by only 9%after 1000 bends and can keep stable in air for above 6 months,which is much longer than that(15 days)of Bi2Te3/PEDOT:PSS film.A demo TE device with 10 p-type legs has an output voltage of 11.5 mV and output power of 47.53 nW at a temperature difference of 60°*** above descriptions make the MWCNTs/PVDF films have a significant advantage in the commercial application of flexible TE devices.

关键词： thermoelectric PVDE carbon nanotube tape casting ferroelectric polarization

来源：评论

学校读者我要写书评

暂无评论

Influence of surface layer slurry temperature on surface cracks and holes of ZTC4 titanium alloy by investment casting

引用

China Foundry 2025年第1期22卷 90-98页

作者： Wei-dong Li Xu-na Shi State Key Laboratory of Materials Processing and Die&Mould Technology and School of Materials Science and Engineering Huazhong University of Science and TechnologyWuhan 430074China Luoyang Ship Material Research Institute Luoyang 471039China Luoyang Ruize Petrochemical Engineering Co. Ltd.Luoyang 471003China

In this work,the influences of surface layer slurry at different temperatures(10℃,14℃,18℃,22℃)on wax patterns deformation,shrinkage,slurry coating characteristics,and the surface quality of the casting were investigated by using a single factor variable *** surface morphologies of the shell molds produced by different temperatures of the surface(first)layer slurries were observed via electron ***,the microscopic composition of these shell molds was obtained by EDS,and the osmotic effect of the slurry on the wax patterns at different temperatures was also assessed by the PZ-200 Contact Angle *** forming reasons for the surface cracks and holes of thick and large ZTC4 titanium alloy by investment casting were *** experimental results show that the surface of the shell molds prepared by the surface layer slurry with a low temperature exhibits noticeable damage,which is mainly due to the poor coating performance and the serious expansion and contraction of wax pattern at low *** second layer shell material(SiO_(2),Al_(2)O_(3))immerses into the crack area of the surface layer,contacts and reacts with the molten titanium to form surface cracks and holes in the *** the increase of the temperature of surface layer slurry,the damage to the shell surface tends to weaken,and the composition of the shell molds'surface becomes more uniform with less *** results show that the surface layer slurry at 22℃is evenly coated on the surface of the wax patterns with appropriate thickness,and there is no surface shell mold rupture caused by sliding slurry after sand *** surface layer slurry temperature is consistent with the wax pattern temperature and the workshop temperature,so there is no damage of the surface layer shell caused by expansion and ***,the shell mold prepared by the surface layer slurry at this temperature has good integrity,isolating the contact between the low inert

关键词： titanium alloy surface layer slurry surface cracks surface holes investment casting

来源：评论

学校读者我要写书评

暂无评论

B2-CuZr reinforced amorphous alloy matrix composites:A review

引用

China Foundry 2025年第1期22卷 1-11页

作者： Wei Guo Run-hua Huang Zhen Zhang Mi Zhao Jin-cheng Wang Yan-qiang Qiao Shu-lin Lü Shu-sen Wu State Key Lab of Materials Processing and Die&Mould Technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan 430074China State Key Laboratory of Solidification Processing Northwestern Polytechnical UniversityXi’an 710072China School of Aerospace Engineering Huazhong University of Science and TechnologyWuhan 430074China Research Institute of Huazhong University of Science and Technology in Shenzhen Shenzhen 518057GuangdongChina

B2-CuZr phase reinforced amorphous alloy matrix composites has become one of the research hotspots in the field of materials science due to the“transformation-induced plasticity”phenomenon,which makes the composites show better macroscopic plastic deformability and obvious work-hardening behavior compared to the conventional amorphous alloy matrix composites reinforced with ductile ***,the in-situ metastable B2-CuZr phase tends to undergo eutectoid decomposition during solidification,and the volume fraction,size,and distribution of B2-CuZr phase are difficult to control,which limits the development and application of these *** date,much efforts have been made to solve the above problems through composition optimization,casting parameter tailoring,and post-processing *** this study,a review was given based on relevant studies,focusing on the predictive approach,reinforcing mechanism,and microstructure tailoring methods of B2-CuZr phase reinforced amorphous alloy matrix *** research focus and future prospects were also given for the future development of the present composite system.

关键词： amorphous alloy matrix composite B2-CuZr phase plasticity microstructure tailoring

来源：评论

学校读者我要写书评

暂无评论

Improving the reliability of classical molecular dynamics simulations in battery electrolyte design

引用

Journal of Energy Chemistry 2025年第2期101卷 34-41,I0002页

作者： Xin He Yujie Zhang Haomiao Li Min Zhou Wei Wang Ruxing Wang Kai Jiang Kangli Wang State Key Laboratory of Advanced Electromagnetic Technology School of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuhan 430074HubeiChina State Key Laboratory of Materials Processing and Die&Mould Technology College of Materials Science and EngineeringHuazhong University of Science and Technology Wuhan 430074HubeiChina Hubei Collaborative Innovation Center for High-efficiency Utilization of Solar Energy Hubei University of TechnologyWuhan 430068HubeiChina

Explorations into new electrolytes have highlighted the critical impact of solvation structure on battery performance,Classical molecular dynamics(CMD)using semi-empirical force fields has become an essential tool for simulating solvation ***,mainstream force fields often lack accuracy in describing strong ion-solvent interactions,causing disparities between CMD simulations and experimental *** some empirical methods have been employed in some of the studies to address this issue,their effectiveness has been *** CMD research,supported by quantum chemical calculations and experimental data,reveals that the solvation structure is influenced not only by the charge model but also by the polarization *** empirical approaches that focused solely on adjusting ion-solvent interaction strengths overlooked the importance of polarization *** on this insight,we propose integrating the Drude polarization model into mainstream force fields and verify its feasibility in carbonate,ether,and nitrile *** experimental results demonstrate that this approach significantly enhances the accuracy of CMD-simulated solvation *** work is expected to provide a more reliable CMD method for electrolyte design,shielding researchers from the pitfalls of erroneous simulation outcomes.

关键词： Electrolyte Classical molecular dynamics Solvation structure Simulations

来源：评论

学校读者我要写书评

暂无评论

Contextual design and real-time verification for agile casting design

引用

China Foundry 2025年第2期22卷 231-238页

作者： Dong Xiang Chu-hao Zhou Xuan-pu Dong Shu-ren Guo Yan-song Ding Hua-tang Cao State Key Laboratory of Materials Processing and Die&Mold Technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan 430074China

In the foundry industries,process design has traditionally relied on manuals and complex theoretical *** the advent of 3D design in casting,computer-aided design(CAD)has been applied to integrate the features of casting process,thereby expanding the scope of design *** technologies use parametric model design techniques for rapid component creation and use databases to access standard process parameters and design ***,3D models are currently still created through inputting or calling parameters,which requires numerous verifications through calculations to ensure the design *** process may be significantly slowed down due to repetitive modifications and extended design *** a result,there are increasingly urgent demands for a real-time verification mechanism to address this ***,this study proposed a novel closed-loop model and software development method that integrated contextual design with real-time verification,dynamically verifying relevant rules for designing 3D casting ***,the study analyzed three typical closed-loop scenarios of agile design in an independent developed intelligent casting process *** is believed that foundry industries can potentially benefit from favorably reduced design cycles to yield an enhanced competitive product market.

关键词： agile design context-design casting process design real-time verification smart manufacturing

来源：评论

学校读者我要写书评

暂无评论

Impact of annealing on structural and corrosion resistance properties of Ti_(20)Zr_(20)Hf_(20)Be_(20)Ni_(20)high-entropy metallic glass

引用

Rare Metals 2025年第1期44卷 565-580页

作者： Ke-Ran Li Pan Gong Dong-Liang Wang Cheng Zhang Hu Huang Muhammad Yasir Mao Zhang Xin-Yun Wang State Key Laboratory of Materials Processing and Die&Mould Technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan 430074China Research Institute of Huazhong University of Science and Technology in Shenzhen Shenzhen 518057China Key Laboratory of CNC Equipment Reliability Ministry of EducationSchool of Mechanical and Aerospace EngineeringJilin UniversityChangchun 130022China Department of Materials Science&Engineering Institute of Space TechnologyIslamabad 44000Pakistan

This study comprehensively investigates the effects of annealing on the structural,electrochemical properties and passivation film characteristics of Ti_(20)Zr_(20)Hf_(20)Be_(20)Ni_(20)(at%)high-entropy metallic glass(HE-MG).Subjected to various annealing temperatures,the samples were analyzed in a 3.5 wt%NaCl solution to evaluate changes in their microstructure and assess their corrosion *** reveal that the HE-MG undergoes multistage crystallization,displaying an amorphous matrix integrated with face centered cubic(FCC)and Ni_(7)Zr_(2)phases between 420 and 500℃,indicating robust thermal *** assessments identify a critical temperature threshold:Below the glass transition temperature(Tg),the HE-MG maintains excellent corrosion resistance,promoting stable passivation *** Tg,enhanced long-range atomic rearrangement during relaxation increases passivation layer defects and significantly diminishes corrosion resistance.X-ray photoelectron spectroscopy(XPS)analyses show that the primary components of the passivation layer are TiO_(2),ZrO_(2),HfO_(2)and *** annealing temperatures lead to enhanced Be and Ni content and decreased Ti,Zr and ***,high mixing entropy and significant atomic size mismatch suppress long-range atomic rearrangement and *** crystallization begins above Tg by_(20)℃,with crystalline phases evenly distributed within the matrix without drastically affecting corrosion *** investigation highlights the impact of thermal treatment on the properties of HE-MG,contributing valuable insights into optimizing their performance and applications.

关键词： High-entropy metallic glass Annealing Corrosion resistance Glass transition temperature Cluster

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：