检索结果-内蒙古大学图书馆

10th IEEE International Power Electronics and Motion control Conference, IPEMC 2024 ECCE Asia

作者： Zhang, Kai Liu, Hanyu Sun, Kai Tsinghua University State Key Laboratory of Power System Operation and Control Department of Electrical Engineering China

ISBN: (纸本)9798350351330

LCC converters incorporate the stray parameters of high frequency transformer and are commonly employed as the initial stage of high-voltage DC power supplies, enhancing both efficiency and power density. However, the significant overshoot that occurs during the startup phase of high-voltage DC power supply poses considerable difficulties for the circuit. In this article, a simple open-loop soft startup control method is proposed: First, the operation mode analysis method is used to accurately solve the time-domain model of the LCC converter under different duty cycles in continuous current mode (CCM). Second, an open-loop variable duty cycle soft startup control strategy from the energy transmitted view is derived. Finally, soft startup process corresponding to different startup time requirements are verified on a 200V/20kV experimental prototype. © 2024 IEEE.

关键词： Time domain analysis

来源：评论

学校读者我要写书评

暂无评论

Strong metal-support interaction (SMSI) in environmental catalysis: Mechanisms, application, regulation strategies, and breakthroughs

引用

Environmental Science and Ecotechnology 2024年第6期22卷 7-24页

作者： Fuyuan Qi Jianfei Peng Zilu Liang Jiliang Guo Jiayuan Liu Tiange Fang Hongjun Mao Tianjin Key Laboratory of Urban Transport Emission Research&State Environmental Protection Key Laboratory of Urban Ambient Air Particulate Matter Pollution Prevention and Control College of Environmental Science and EngineeringNankai UniversityTianjin300071China

The strong metal-support interaction(SMSI)in supported catalysts plays a dominant role in catalytic degradation,upgrading,and remanufacturing of environmental *** studies have shown that SMSI is crucial in supported catalysts'activity and ***,for redox reactions catalyzed in environmental catalysis,the enhancement mechanism of SMSI-induced oxygen vacancy and electron transfer needs to be ***,the precise control of SMSI interface sites remains to be fully *** we provide a systematic review of SMSI's catalytic mechanisms and control strategies in purifying gaseous pollutants,treating organic wastewater,and valorizing biomass solid *** explore the adsorption and activation mechanisms of SMSI in redox reactions by examining interfacial electron transfer,interfacial oxygen vacancy,and interfacial acidic ***,we develop a precise regulation strategy of SMSI from systematical perspectives of interface effect,crystal facet effect,size effect,guest ion doping,and modification ***,we point out the drawbacks and breakthrough directions for SMSI regulation in environmental catalysis,including partial encapsulation strategy,size optimization strategy,interface oxygen vacancy strategy,and multi-component *** review article provides the potential applications of SMSI and offers guidance for its controlled regulation in environmental catalysis.

关键词： Environmental catalysis Metal oxide supported catalysts Strong metal-support interaction(SMSI) Interfacial site regulation Electron transfer

来源：评论

学校读者我要写书评

暂无评论

3D digital-image correlation insight into generalized relaxation behavior of sandstone under stress and pore pressure coupling

引用

Journal of Rock Mechanics and Geotechnical engineering 2024年第7期16卷 2516-2536页

作者： Cancan Chen Heping Xie Jiang Xu Seisuke Okubo Shoujian Peng Cunbao Li Minghui Li State Key Laboratory of Intelligent Construction and Healthy Operation and Maintenance of Deep Underground Engineering Shenzhen UniversityShenzhen518060China Guangdong Provincial Key Laboratory of Deep Earth Sciences and Geothermal Energy Exploitation and Utilization Institute of Deep Earth Sciences and GreenEnergyCollege of Civil and Transportation EngineeringShenzhen UniversityShenzhen518060China State Key Laboratory of Coal Mine Disaster Dynamics and Control Chongqing UniversityChongqing400044China

The occurrence of geological hazards and the instability of geotechnical engineering structures are closely related to the time-dependent behavior of ***,the idealization boundary condition for constant stress in creep or constant strain in relaxation is not usually attained in natural geological ***,generalized relaxation tests that explore the simultaneous changes of stress and strain with time under different stress levels with constant pore-water pressure are conducted in this *** results show that in area Ⅰ,area Ⅱ,and area Ⅲ,the stress and strain both change synchronously with time and show similar evolutionary laws as the strain-time curve for creep or the stress-time curve for *** the applied stress level surpasses the δ_(ci) or δ_(cd) threshold,the variations in stress and strain and their respective rates of change exhibit a significant *** radial deformation and its rate of change exhibit greater sensitivity in response to stress *** apparent strain deforms homogeneously at the primary stage,and subsequently,gradually localizes due to the microcrack development at the secondary ***,interconnection of the microcracks causes the formation of a shear-localization zone at the tertiary *** strain-time responses inside and outside the localization zone are characterized by local strain accumulation and inelastic unloading during the secondary and tertiary stages,*** width of the shear-localization zone is found to range from 4.43 mm to 7.08 mm and increased with a longer *** electron microscopy(SEM)reveals a dominant coalescence of intergranular cracks on the fracture surface,and the degree of physiochemical deterioration caused by water-rock interaction is more severe under a longer *** brittle sandstone’s time-dependent deformation is essentially controlled by microcrack development during generalized relaxation,and its expectancy-life is dete

关键词： Generalized relaxation Stress level Direction coefficient Major-strain field Microcrack damage Stress threshold

来源：评论

学校读者我要写书评

暂无评论

A Core Loss Estimation Method Based on Data-driven Technology with Multi-head Attention Mechanism 10

A Core Loss Estimation Method Based on Data-driven Technolog...

引用

10th IEEE International Power Electronics and Motion control Conference, IPEMC 2024 ECCE Asia

作者： Su, Bowen Sun, Kai Yang, Min Xiao, Yunhao Zhang, Kai Liu, Bo Tsinghua University State Key Laboratory of Power System Operation and Control Department of Electrical Engineering China

ISBN: (纸本)9798350351330

Magnetic components play an important role in power electronic equipment, but there is still lack of accurate magnetic core loss estimation model. The data-driven methods are well-developed in recent years, and they are also more robust and accurate than conventional model-driven methods like Steinmetz Equation (SE) and improved Generalized Steinmetz Equation (iGSE). However, existing data-driven methods often focus on single excitation waveform like sinusoidal excitation waveform, which is not robust enough when facing complex excitation waveform with many high-frequency harmonic waveform. This paper presents a data-driven model based on attention mechanism which can capture the inner relationship within the input excitation waveform to present a more accurate core loss estimation results. And the comparison results with Multi-layer Perceptron (MLP) and Long Short-Term Memory(LSTM) models indicates that the proposed model has much more accuracy when facing complex excitation waveform. The proposed model can help to design magnetic components. © 2024 IEEE.

关键词： Facings

来源：评论

学校读者我要写书评

暂无评论

A mixed-coordination electron trapping-enabled high-precision touch-sensitive screen for wearable devices

引用

Bio-Design and Manufacturing 2024年第4期7卷 413-427页

作者： Xi Zhang Junchi Ma Hualin Deng Jinming Zhong Kaichen Xu Qiang Wu Bo Wen Dongfeng Diao Guangdong Provincial Key Laboratory of Micro/Nano Optomechatronics Engineering College of Mechatronics and Control EngineeringShenzhen UniversityShenzhen 518060China State Key Laboratory of Fluid Power and Mechatronic Systems School of Mechanical EngineeringZhejiang UniversityHangzhou 310058China Shenzhen University General Hospital Shenzhen 518055China Research Center of Medical Plasma Technology Shenzhen UniversityShenzhen 518060China

Touch-sensitive screens are crucial components of wearable *** such as reduced graphene oxide(rGO),carbon nanotubes(CNTs),and graphene offer promising solutions for flexible touch-sensitive ***,when stacked with flexible substrates to form multilayered capacitive touching sensors,these materials often suffer from substrate delamination in response to deformation;this is due to the materials having different Young’s modulus *** results in failure to offer accurate touch screen *** this work,we demonstrate an induced charge-based mutual capacitive touching sensor capable of high-precision touch *** is enabled by electron trapping and polarization effects related to mixed-coordinated bonding between copper nanoparticles and vertically grown graphene ***,we used an electron cyclotron resonance system to directly fabricate graphene-metal nanofilms(GMNFs)using carbon and copper,which are firmly adhered to flexible *** being subjected to 3000 bending actions,we observed almost no change in touch *** screen interaction system,which has a signal-to-noise ratio of 41.16 dB and resolution of 650 dpi,was tested using a handwritten Chinese character recognition trial and achieved an accuracy of 94.82%.Taken together,these results show the promise of touch-sensitive screens that use directly fabricated GMNFs for wearable devices.

关键词： Flexible touch-sensitive screen Graphene-metal nanofilms Mixed coordination Wearable device

来源：评论

学校读者我要写书评

暂无评论

Planning of a Single Flow Channel in Valve Blocks Based on Additive Manufacturing and the Ant Colony Algorithm

引用

Chinese Journal of Mechanical engineering 2024年第5期37卷 191-202页

作者： Jin Zhang Ziyang Li Yuying Zhang Yandong Liu Ying Li Xiangdong Kong School of Mechanical Engineering Yanshan UniversityQinhuangdao 066004China Hebei Provincial Key Laboratory of Heavy Machinery Fluid Power Transmission and Control Qinhuangdao 066004China National&Local Joint Engineering Research Center for Advanced Manufacturing Technology and Equipment Qinhuangdao 066004China State Key Laboratory of Fluid Power and Mechatronic Systems Hangzhou 310027China

As electro-hydrostatic actuator(EHA)technology advances towards lightweight and integration,the demand for enhanced internal flow pathways in hydraulic valve blocks ***,owing to the constraints imposed by traditional manufacturing processes,conventional hydraulic integrated valve blocks fail to satisfy the demands of a more compact channel layout and lower energy ***,the subjectivity in the arrangement of internal passages results in a time-consuming and labor-intensive *** study employed additive manufacturing technology and the ant colony algorithm and B-spline curves for the meticulous design of internal passages within an aviation EHA valve *** layout environment for the valve block passages was established,and path optimization was achieved using the ant colony algorithm,complemented by smoothing using B-spline ***-dimensional modeling was performed using SolidWorks software,revealing a 10.03%reduction in volume for the optimized passages compared with the original *** fluid dynamics(CFD)simulations were performed using Fluent software,demonstrating that the algorithmically optimized passages effectively prevented the occurrence of vortices at right-angled locations,exhibited superior flow characteristics,and concurrently reduced pressure losses by 34.09%-36.36%.The small discrepancy between the experimental and simulation results validated the efficacy of the ant colony algorithm and B-spline curves in optimizing the passage design,offering a viable solution for channel design in additive manufacturing.

关键词： Hydraulic valve block Flow channel B-spline curve Additive manufacturing Ant colony algorithm

来源：评论

学校读者我要写书评

暂无评论

Honeycomb-like biochar framework coupled with Fe_(3)O_(4)/FeS nanoparticles as efficient heterogeneous Fenton catalyst for phenol degradation

引用

Journal of Environmental Sciences 2024年第2期136卷 390-399页

作者： Aihua Cheng Yi He Xiaohe Liu Chi He Department of Environmental Engineering College of Geology and EnvironmentXi’an University of Science and TechnologyXi’an 710054China State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power EngineeringXi’an Jiaotong UniversityXi’an 710049China National Engineering Laboratory for VOCs Pollution Control Material and Technology University of Chinese Academy of SciencesBeijing 101408China

Achieving an efficient and stable heterogeneous Fenton reaction over a wide pH range is of great significance for wastewater ***,a pollen-derived biochar catalyst with a unique honeycomb-like structure,coupled with the dispersion of magnetic Fe_(3)O_(4)/FeS(Fe/S)nanoparticles,was synthesized by simple impregnation precursor,followed by *** prepared Fe/S-biochar catalyst demonstrated outstanding phenol degradation efficiency across a wide pH range,with 98%of which eliminated even under neutral conditions(pH 7.0).The high catalytic activity was due to the multilevel porous structure of pollenderived biochar provided enough active sites and allowed for better electron transfer,then increases oxidation ability to promote the ***,the acid microenvironment formed by SO_(4)^(2-)group from Fe/S composite extended the pH range for Fenton reaction,and S^(2-)facilitated the conversion of≡Fe^(3+)to≡Fe^(2+),resulting in remarkable degradation ***,biochar can effectively promote cycling stability by limiting Fe *** work may provide a general strategy for designing 3D framework biochar-based Fe/S catalysts with excellent performance for heterogeneous Fenton reactions.

关键词： Biomass Biochar Fenton reaction Fe_(3)O_(4)/FeS(Fe/S) Phenol degradation

来源：评论

学校读者我要写书评

暂无评论

Achieving an Accurate Random Process Model for PV Power Using Cheap Data:Leveraging the SDE and Public Weather Reports

引用

CSEE Journal of Power and Energy Systems 2025年第1期11卷 124-135页

作者： Yiwei Qiu Jin Lin Zhipeng Zhou Ningyi Dai Feng Liu Yonghua Song College of Electrical Engineering Sichuan UniversityChengdu610065China State Key Laboratory of the Control and Simulation of Power Systems and Generation Equipment Tsinghua UniversityBeijing 100087China State Key Laboratory of Internet of Things for Smart City University of MacaoMacao999078China Department of Electrical Engineering Tsinghua UniversityBeijing100087China

Stochastic differential equation (SDE)-based random process models of renewable energy sources (RESs) jointly capture evolving probability distribution and temporal correlation in continuous time. It enabled recent studies to remarkably improve performance of power system dynamic uncertainty quantification and optimization. However, considering the non-homogeneous random process nature of PV, there still remains a challenging question: how can a realistic and accurate daily SDE model for PV power be obtained that reflects its weather-dependent and non-Gaussian uncertainty in operation, especially when high-resolution numerical weather prediction (NWP) or sky imager is unavailable for many distributed plants? To fill this gap, this article finds that an accurate SDE model for PV power can be constructed only using the data from low-resolution public weather reports. Specifically, for each day, an hourly parameterized Jacobi diffusion process recreates temporal patterns of PV volatility. Its parameters are mapped from the day's public weather reports to reflect varying weather conditions using a simple learning model. The SDE model jointly captures intraday and intrahour volatility. Statistical examination shows that the proposed approach outperforms a selection of the latest deep learning-based time series models on real-world data collected in Macao.

关键词： Photovoltaic(PV)power random process stochastic differential equation(SDE) stochastic optimization time series modeling uncertainty quantification weather report

来源：评论

学校读者我要写书评

暂无评论

Mesoscale modeling on the influence of surfactants on seepage law during water injection in coal

引用

Particuology 2025年第1期96卷 1-13页

作者： Yanan Miao Haoran Li Mingzhu Zhu Chaojie Zhao Tengwen Zhang Hussein Mohammed Ahmed Kaid College of Safety and Environmental Engineering Shandong University of Science and TechnologyQingdao266590China State Key Laboratory of Mining Disaster Prevention and Control Co-Founded By Shandong Province and the Ministry of Science and Technology Shandong University of Science and TechnologyQingdao266590China Sinopec Research Institute of Safety Engineering Co. Ltd.Qingdao266000China State Key Laboratory of Safety and Control for Chemicals SINOPEC Research Institute of Safety Engineering Co.Ltd.Qingdao266000China College of Mechanical and Electronic Engineering Shandong University of Science and TechnologyQingdao266590China

To investigate the mesoscopic influence of surfactants on seepage law during water injection in coal seam, this paper innovatively establishes a fluid transport lattice Boltzmann (LBM) model by incorporating the seepage resistance generated from the porous media and external forces, which embodies the impact of wettability degree resulted from cocamidopropyl betaine (CAB), sodium dodecyl sulfate (SDS), and coconutt diethanol amide (CDEA) reagents at a 0.1% concentration. The main conclusions derived from this investigation are as follows: Firstly, as the lattice number in the X direction increases, the average seepage velocities in coal samples treated by deionized water, 0.1% CAB, 0.1% SDS, and 0.1% CDEA reagents (Nos. 1, 2, 3, and 4) exhibit three distinct stages: rapid decline, slow decline, and steady decline;in comparison to raw coal sample, modified coal samples demonstrate decreases of 20.84%, 33.91%, and 61.70%, respectively. Secondly, the critical values of displacement pressure difference exist during the phenomenon that modified reagents spread out in the entire flow channel, which are 3.5, 3.5, and 5.2 MPa, respectively, for coal samples Nos. 2, 3, and 4;this signifies that surpassing these critical values help prevent issues such as blank belts within the wetting range and insufficient dust control. Finally, at a displacement pressure difference of 0.01 (lattice unit), the average velocity ratios for samples (Nos. 2, 3, and 4) are 0.78, 0.56, and 0.37 (lattice unit), respectively;notably, the water flow velocities in modified coal samples are lower compared to that in raw coal sample, indicating that the addition of surfactants impede the seepage process of water injection in coal seam. Moreover, when the displacement pressure difference reaches 0.03 (lattice unit), the velocity ratio of CDEA-modified coal sample exceeds 100%;this means that when the displacement pressure difference surpasses 15.6 MPa, the water injection effect of CDEA-modified coal sa

关键词： Mesoscale seepage Surfactant Lattice Boltzmann method Velocity ratio Critical displacement pressure difference

来源：评论

学校读者我要写书评

暂无评论

Dynamic properties of low-density expandable polystyrene concrete materials

引用

Defence Technology(防务技术) 2025年第1期43卷 94-108页

作者： Jue Han Hualin Fan Army Engineering University of PLA Nanjing 210007China Research Center of Lightweight Structures and Intelligent Manufacturing State Key Laboratory of Mechanics and Control of Aerospace StructuresNanjing University of Aeronautics and AstronauticsNanjing 210016China Henan International Joint Laboratory of Dynamics of Impact and Disaster of Engineering Structures Department of Civil EngineeringNanyang Institute of TechnologyNanyang 473004China

Expanded polystyrene(EPS)concrete,known for its environmental friendliness,energy absorption capacity,and low impedance,has significant potential application in the fields of wave absorption and vibration *** study designed and prepared EPS concrete materials with four levels of ***-static uniaxial compression and Split Hopkinson Pressure Bar(SHPB)impact tests were conducted to obtain stress-strain curves,elastic moduli,failure modes,energy absorptions,and strain rate effects of the EPS concrete under quasi-static and dynamic loading *** influences of density on various performance indicators were *** combining the Zhu-Wang-Tang(ZWT)constitutive model with a modified elastic-brittle model,a modified dynamic constitutive model was *** accuracy of the model was validated by the experimental *** results indicate that the addition of EPS particles enhances the ductility of the EPS *** EPS concrete has significant strain rate effect,which gets stronger as density *** modifiedconstitutive model accurately characterizes the dynamic stress-strain curves of the EPS concrete.

关键词： EPS concrete Impact behavior Constitutive model SHPB test

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：