检索结果-内蒙古大学图书馆

ASME 2024 Power Conference, POWER 2024

作者： Liu, Xingyan Fu, Yue Liu, Ming Wang, Zhu Yan, Yunjie State Key Laboratory of Multiphase Flow Xi'an Jiaotong University Xi'an China

ISBN: (纸本)9780791888186

The global energy mix is evolving to sustainable and low carbon, so carbon capture should be developed and applied for the decarbonization of coal-fired power plants. Many coal-fired power plants have been reformed to combined heat and power, which can bring significant energy saving and economic benefits. When the combined heat and power plant is integrated with post-combustion carbon capture system, the carbon capture system will consume much steam extracted from steam turbines, and the heat and power outputs of the power plant will be influenced. Therefore, operational flexibility and thermodynamic performances of a combined heat and power plant integrated with carbon capture system will be evaluated in this study. A 660MW subcritical power plant is analyzed as the reference case, and a large-scale carbon capture system is integrated. The carbon capture system is driven by the exhaust steam of the intermediate pressure cylinder. The off-design simulation model of the coal-fired power plant is developed and validated, and the Aspen Plus software is used to develop the model of the carbon capture system. The integrated system is optimized to decrease the energy consumption of the carbon capture system, Then, operational flexibility and thermodynamic performances of the integrated system is evaluated. Results show that the adjustable ranges of heat and power loads decrease due to the integration of CCS. The energy efficiency within the operation domain in dominated by the heat load, but power load has higher influence on the exergy efficiency than the heat load. The coal consumption rate for carbon capture system is about 0.09kg/kg. Copyright © 2024 by ASME.

关键词： Coal

来源：评论

学校读者我要写书评

暂无评论

Experimental and Theoretical Study on CHF of a Ultra-Supercritical Circulating Fluidized Bed Boiler Water-Wall Tube at near-Critical Pressures

引用

Journal of Thermal Science 2023年第1期32卷 166-182页

作者： WANG Wenyu MA Zhan QING Hao NIE Chao YANG Haoyu BI Lingfeng YANG Dong PAN Wenxiao State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong UniversityXi'an 710049China Department of Mechanical Engineering University of Wisconsin-Madison1513 University AveMadisonWI 53706USA

The experimental and theoretical research on the critical heat flux(CHF)in a uniformly heated water-wall tube of the efficient ultra-supercritical circulating fluidized bed(USCFB)boiler has been *** particular,the experimental pressure varies from 18 MPa to 21 MPa,which is from 0.814Pcr–0.95Pcr(Pcr:critical pressure).The mass flux varies from 310 kg·m^(–2)·s^(–1)to 550 kg·m^(–2)·s^(–1).The inlet sub-cooling temperatures vary from 5°C to 10°*** material of the tube is *** experimental investigation,the near critical pressure CHF test data of water are *** find that the CHF mainly occurs when the vapor qualities are less than 0.4,and it occurs earlier(at lower vapor quality)when the pressure is closer to 22.115 MPa or the mass flux is *** the experimental data,a correlation function for the CHF is established via regression and machine *** established via machine learning greatly improved the regression *** study the CHF phenomenon mechanically,a theoretical model is established based on the near-surface bubble crowding model describing the DNB-type *** the development of the CHF model,the friction resistance coefficient is determined according to our test *** comparison with different experimental results,the near-surface bubble crowding model is well suited to describe DNB-type *** calculation results of the model can provide reference for the optimal design of the USCFB boiler.

关键词： circulating fluidized bed critical heat flux near-critical pressure bubble crowding machine learning

来源：评论

学校读者我要写书评

暂无评论

Numerical prediction of spatio-temporal frosting patterns of curved surface considering varying working parameters

引用

Energy Storage and Saving 2023年第1期2卷 348-358页

作者： Xue Liu Xiaojun Dong Shaohang Yan Yu Hou Tianwei Lai State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an710049China

Accurate numerical prediction of frosting patterns is essential for the efficient layout and timing defrosting of heat exchangers under frosting *** this study,a numerical model is developed to predict the spatio-temporal frosting habits on curved surfaces in combination with the correlations of frost density and thermal *** the model,frost melting is *** verification,the frosting and heat transfer characteristics along the flow path are investigated under various structural and operating *** thickness along the path is mainly affected by the cooling surface temperature,while the heat and mass transfer rates are strongly correlated with the humidity *** proportions of latent heat and sensible heat are distributed more unevenly in parallel flow case than in counter flow *** deposition is facilitated by a smaller radius of curvature of the cooling *** uniform frosting characteristics along the path and smaller heat transfer obstruction are presented with a smaller length-to-height ratio of the flow path.

关键词： Frosting Numerical prediction Heat transfer Curved surface Varying parameter

来源：评论

学校读者我要写书评

暂无评论

Alloy nanocrystals:Synthesis paradigms and implications

引用

Chinese Journal of Structural Chemistry 2023年第11期42卷 1-5页

作者： Zhaojun Liu Zerui Mu Chuanbo Gao State Key Laboratory of Multiphase Flow in Power Engineering Frontier Institute of Science and TechnologyXi'an Jiaotong UniversityXi'an710054China

*** Noble metal nanocrystals serve as exceptional catalysts across a wide spectrum of industrial processes[1].Moreover,there exists a substantial demand for noble metal catalysts in emerging clean-energy applications,such as water-splitting hydrogen production and fuel *** non-noble transition metals or main-group metals into noble metal nanocrystals can reduce the weight of noble metals in the catalysts,thus remarkably lowering the ***,alloy nanocrystals offer intriguing catalytic properties that surpass those of their monometallic counterparts,thanks to the charge transfer between the constituent components and the expansion or shrinkage of the lattice size[2].

关键词： alloy metals noble

来源：评论

学校读者我要写书评

暂无评论

3D coarse-grained DPM simulation of the MIP reaction-regeneration loop

引用

Particuology 2024年第6期89卷 57-66页

作者： Yanhao Ye Shuai Zhang Ji Xu Wei Ge State Key Laboratory of Mesoscience and Engineering(formerly State Key Laboratory of Multiphase Complex Systems) Institute of Process EngineeringChinese Academy of SciencesBeijing100190China School of Chemical Engineering University of Chinese Academy of SciencesBeijing100049China

The reactor-regenerator loop is the core facility of the maximizing iso-paraffin(MIP)*** the discrete particle method(DPM)simulation can provide detailed information at the particle scale,it has been unable to simulate such a complex loop system due to limitations of coarse-grained(CG)models,computing software,and *** this study,a newly proposed soft-shell CG-DPM model with a CG ratio of up to 800 is used to simulate a 3.5 Mt/a industrial-scale MIP reactor-regenerator *** solid fraction distribution obtained is found to agree well with in-situ *** properties including the distribution of solid fraction,gas and solid velocity,standard derivation of solid fraction with time,temporal distribution of the flow field,and particle residence time distribution are measured in the simulation,which are meaningful to better design and operate such systems in the future.

关键词： Discrete particle method Coarse-grain Maximizing iso-paraffins Full-loop Reaction-regeneration system

来源：评论

学校读者我要写书评

暂无评论

Mass transfer enhancement and hydrodynamic performance with wire mesh coupling solid particles in bubble column reactor

引用

Chinese Journal of Chemical engineering 2024年第3期67卷 195-205页

作者： Chuanjun Di Jipeng Dong Fei Gao Guanghui Chen Pan Zhang Jianlong Li Key Laboratory of Multiphase Flow Reaction and Separation Engineering of Shandong Province College of Chemical EngineeringQingdao University of Science and TechnologyQingdao 266042China College of Electromechanical Engineering Qingdao University of Science and TechnologyQingdao 266043China

It is of vital significance to investigate mass transfer enhancements for chemical engineering *** work focuses on investigating the coupling influence of embedding wire mesh and adding solid particles on bubble motion and gas-liquid mass transfer process in a bubble *** image velocimetry(PIV)technology was employed to analyze the flow field and bubble motion behavior,and dynamic oxygen absorption technology was used to measure the gas-liquid volumetric mass transfer coefficient(kLa).The effect of embedding wire mesh,adding solid particles,and wire mesh coupling solid particles on the flow characteristic and kLa were analyzed and *** results show that the gas-liquid interface area increases by 33%-72%when using the wire mesh coupling solid particles strategy compared to the gas-liquid two-phase flow,which is superior to the other two strengthening *** with the system without reinforcement,kLa in the bubble column increased by 0.5-1.8 times with wire mesh coupling solid particles method,which is higher than the sum of kLa increases with inserting wire mesh and adding particles,and the coupling reinforcement mechanism for affecting gas-liquid mass transfer process was discussed to provide a new idea for enhancing gas-liquid mass transfer.

关键词： Fluid mechanics Bubble Mass transfer Wire mesh coupling solid particles Particle image velocimetry Hydrodynamics

来源：评论

学校读者我要写书评

暂无评论

Function-reversible facets enabling SrTiO_(3)nanocrystals for improved photocatalytic hydrogen evolution

引用

Frontiers in Energy 2024年第1期18卷 101-109页

作者： Bin WANG Bei AN Xiaoqian LI Shaohua SHEN School of Physics Key Laboratory for Non-equilibrium Synthesis and Modulation of Condensed Matter(Ministry of Education)Key Laboratory of Shaanxi for Advanced Materials and Mesoscopic PhysicsXi’an Jiaotong UniversityXi’an 710049China International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power EngineeringXi’an Jiaotong UniversityXi’an 710049China

It has been widely reported that,for faceted nanocrystals,the two adjacent facets with different band levels contribute to promoted charge separation,and provide active sites for photocatalytic reduction and oxidation reaction,*** such cases,only one family of facets can be used for photocatalytic hydrogen ***,by using SrTiO_(3)nanocrystals enclosed by{023}and{001}facets as a model photocatalyst,this paper proposed a strategy to achieve the full-facets-utilization of the nanocrystals for photocatalytic hydrogen via chemically depositing Pt nanoparticles on all *** photo-deposition experiment of CdS provided direct evidence to demonstrate that the{023}facets which were responsible for photooxidation reaction can be function-reversed for photocatalytic hydrogen evolution after depositing Pt nanoparticles,together with the{001}***,the full-facets-utilization led to a much-improved activity for photocatalytic hydrogen,in contrast to those SrTiO_(3)nanocrystals with only{001}facets deposited by Pt nanoparticles via a photo-deposition method.

关键词： SrTiO_(3)nanocrystals crystal facets photocatalysis hydrogen evolution

来源：评论

学校读者我要写书评

暂无评论

MIXED DISCONTINUOUS GALERKIN METHOD FOR QUASI-NEWTONIAN STOKES flowS

引用

Journal of Computational Mathematics 2024年第3期42卷 885-910页

作者： Yanxia Qian Fei Wang Wenjing Yan School of Mathematics and Statistics Xi'an Jiaotong UniversityXi'an 710049China School of Mathematics and Statistics&State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong UniversityXi'an 710049China

In this paper,we introduce and analyze an augmented mixed discontinuous Galerkin(MDG)method for a class of quasi-Newtonian Stokes *** the mixed formulation,the unknowns are strain rate,stress and velocity,which are approximated by a discontinuous piecewise polynomial triplet ■for k≥***,the discontinuous piecewise polynomial function spaces for the field of strain rate and the stress field are designed to be *** addition,the pressure is easily recovered through simple *** the benefit of the analysis,we enrich the MDG scheme with the constitutive equation relating the stress and the strain rate,so that the well-posedness of the augmented formulation is obtained by a nonlinear functional *** k≥0,we get the optimal convergence order for the stress in broken ■(div)-norm and velocity in L^(2)-***,the error estimates of the strain rate and the stress in-norm,and the pressure in L^(2)-norm are optimal under certain ***,several numerical examples are given to show the performance of the augmented MDG method and verify the theoretical *** evidence is provided to show that the orders of convergence are sharp.

关键词： Quasi-Newtonian fows Mixed discontinuous Galerkin method Symmetric strain rate Symmetric stress Optimal convergence orders

来源：评论

学校读者我要写书评

暂无评论

Experimental study on the thermochemical reduction of supercritical CO2by guaiacol 8

Experimental study on the thermochemical reduction of superc...

引用

8th International Conference on Smart and Sustainable Technologies, SpliTech 2023

作者： Wei, Yimeng Kuanibieke, Jiadela Jin, Hui Xi'an Jiaotong University State Key Laboratory of Multiphase Flow in Power Engineering China

ISBN: (纸本)9789532901283

The continuous growth of CO2 emissions is one of the global problems facing humanity, and how to convert and exploit the stock of CO2 has become an urgent issue. Biomass as an activity of CO2 thermal reduction medium has become the focus of human attention in general. Supercritical CO2 (SCCO2) has the advantages of near-liquid density and high solubility, which can further strengthen the reduction process (T≥31.26, P≥72.9 atm). This paper described a SCCO2 reduction method of guaiacol on an intermittent Kettle Reactor to investigate the effects of reaction temperature (400-700), residence time (5-20 min) and reactant concentration (4 wt%-16wt%) on the three-phase products. The experimental results indicated that the carbon gasification efficiency (CE) and hydrogen gasification efficiency (HE) were 43.7% and 56.7%, respectively, when the carbon dioxide consumption reached 16.15 mol/kg. As the temperature increased, the consumption of carbon dioxide increased and the concentration of reactants increased with opposite results. © 2023 University of Split, FESB.

关键词： Carbon dioxide

来源：评论

学校读者我要写书评

暂无评论

Lattice-mismatch-induced formation of defect-rich Pd-Cu alloy nanocages for enhanced formic acid oxidation activity

引用

Science China Chemistry 2025年第2期68卷 481-491页

作者： Zhaojun Liu Zhengyan Wang Zhaoyu Wang Hao Yuan Yuke Bai Xiaoxiao Wang Zerui Mu Chunxia Wu Kai Liu Zhun Hu Chuanbo Gao Sate Key Laboratory of Multiphase Flow in Power Engineering Frontier Institute of Science and TechnologyXi’an Jiaotong UniversityXi’an 710049China Institute of Industrial Catalysis School of Chemical Engineering and TechnologyXi’an Jiaotong UniversityXi’an 710049China

Crystallographic defects in noble metal nanocrystals are recognized as highly active catalytic sites,significantly enhancing activities in many important *** their importance,synthesizing noble metal nanocrystals with a high density of defects poses a considerable synthetic ***,we present a novel lattice mismatch-induced formation mechanism to create high-density defects in noble metal *** approach takes advantage of lattice mismatch to enable nonepitaxial nucleation and growth of a noble metal on a foreign metal substrate,forming abundant noble metal crystallites with random lattice orientations not dictated by the substrate *** these crystallites grow extensively,they merge,forming numerous grain boundaries and yielding defect-rich noble metal ***-rich alloy nanocrystals can also be synthesized through a subsequent vacancy-diffusion alloying *** take defective PdCu alloy nanocages as an example and demonstrate the effectiveness of crystallographic defects in enhancing catalytic performance of noble metal *** nanocages exhibit superior activity in the electrocatalytic formic acid oxidation reaction,which is 1.6 times greater than their defect-free *** strategy offers a new avenue for creating defect-rich noble metal nanocrystals as highly efficient catalysts for a wide array of catalytic applications.

关键词： noble metal nanocrystals defects non-epitaxial growth electrocatalysis formic acid oxidation reaction

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：