检索结果-内蒙古大学图书馆

Angle Scattering Method for Soot Concentration Measurement under Ultra-Low Emissions Condition

Energy engineering 2022年第2期119卷 511-522页

作者： Bin Yang Xingchen Zhu Jie Deng Xiaoxu Guo Jinke Han Xiaowei Liu School of Energy and Power Engineering Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power EngineeringUniversity of Shanghai for Science and TechnologyShanghai200093China State Key Laboratory of Coal Combustion Huazhong University of Science and TechnologyWuhan430074China

Aiming at the problem of soot concentration measurement under ultra-low emission conditions,a forward small angle soot concentration measurement method is *** a typical boiler emission of 0.1μm-3.0μm bimodal distribution soot as an object,the particle scatter simulation calculation under different parameters is carried out,and the influence of detection angle and particle size on the angular scatteringmeasurement of ultra-low emission soot is *** influence of detection angle and particle size on the angular scatteringmeasurement of ultra-lowemission soot is ***,thewavelength of incident light is 650 nm,and the forward detection angle parameter is 15◦for the design of forward small angle soot concentration measurement *** experimental system for measuring soot with standard concentration is *** of particle concentration measurement of 1.0μm and 3.0μm under ultra-low emission conditions are carried *** results show that the average deviation of soot concentration measurement is less than 0.10 mg/m3 under the condition of ultra-low emission by using 15◦of forward detection,which provides an effective way for monitoring ultra-low emission soot concentration in coal-fired power plants.

关键词： Emission monitoring ultra-low emission soot concentration angular scattering

来源：评论

学校读者我要写书评

暂无评论

Thermodynamic Analysis and Optimization of Nuclear Closed Air Brayton Cycle 1

引用

23rd Pacific Basin Nuclear Conference, PBNC 2022

作者： Fang, Huawei Yi, Jingwei Zhang, Xiaoyu Liang, Tiebo Qian, Yiran Tang, Xin Chen, Weixiong Key Laboratory of Nuclear Reactor System Design Technology Nuclear Power Institute of China Sichuan Chengdu China State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Shaanxi Xi’an China

ISBN: (数字)9789811988998

ISBN: (纸本)9789811988981

In order to improve the flexibility and adaptability of micro nuclear power systems, air is considered as an optional working fluid of nuclear Brayton cycle. It has ability to avoid shortage of working fluid under extreme conditions, and ensure the system operating with tight supply. Compared with the traditional open cycles, the closed cycle has advantages of higher cycle efficiency, smaller equipment size and higher power density. Few of closed air power cycle in nuclear power system has been studied by now. In this paper, cycle parameters were analyzed and designed, and optimal cycle performance was compared between cycle constructions. Four closed air Brayton cycles are proposed and modeled in EBSILON 15.0, including simple regenerative cycle (SRC), intercooling regenerative cycle (IRC), reheat regenerative cycle (RRC) and intercooling-reheat regenerative cycle (IRRC). Thermodynamic analysis of the key parameters is conducted, including pressure ratio, turbine inlet temperature, compressor inlet temperature and pressure. In addition, the genetic algorithm (GA) is applied for multi-parameters optimization for the maximal cycle efficiency. Result shows that with the increase of pressure ratio, the efficiency of SRC increases firstly and then decreases. With the increase of turbine inlet temperature, the pressure ratio corresponding to the maximal cycle efficiency increases gradually. Specific work gradually increases with pressure ratio. In higher turbine inlet temperature, the rising velocity of specific work is faster. Cycle efficiency increases with compressor inlet pressure, and this trend tend to be slower in high pressure region. With the increasing of compressor inlet pressure, optimal pressure ratio decreases and finally approaches to 2.0. The cycle minimal cycle pressure was selected as 6 MPa. Maximal efficiency and corresponding pressure ratio increase with turbine inlet temperature increasing and decrease with compressor inlet temperature increasing. Co

关键词： Air

来源：评论

学校读者我要写书评

暂无评论

Comparison of Dynamical System Scaling and Hierarchical Two-Tiered Scaling applications with Definite Solution Analogy Theory to the passive residual heat removal system of Fluoride-Salt-cooled high-Temperature Advanced Reactor 20

Comparison of Dynamical System Scaling and Hierarchical Two-...

引用

20th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, NURETH 2023

作者： Li, Xinyu Zhang, Dalin Zhou, Xingguang Lv, Xindi Jiang, Dianqiang Wu, Zhiyuan Li, Sijun Tian, Wenxi Qiu, Suizheng Su, G.H. State Key Laboratory of Multiphase Flow in Power Engineering Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology School of Nuclear Science and Technology Xi'an Jiaotong University Xi'an710049 China

ISBN: (纸本)9780894487934

The Passive Residual Heat Removal System (PRHRS) of Fluoride-Salt-cooled high-Temperature Advanced Reactor (FuSTAR) has already been designed and scaled by the Hierarchical Two-Tiered Scaling (H2TS).However, considering the difficulties to identify the distortion of the dynamic response, the Dynamical System Scaling(DSS) method was also adopted for comparison in this ***, based on the dimensionless governing equations without any common assumptions of the natural cycle process in PRHRS, the Definite Solution Analogy Theory (DSAT) was put forward in this study to calibrate dimensionless numbers based on differential *** the parameters of geometric and thermohydraulics were re-evaluated by the DSS method and compared with those from the H2TS *** results show that H2TS and DSS are equivalent in experimental design results under the constraint of *** H2TS method is better at accurately quantifying the deviation item by item, while the DSS method can find the most suitable experimental structure more quickly. © 2023 Proceedings of the 20th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, NURETH 2023. All rights reserved.

关键词： Hierarchical systems

来源：评论

学校读者我要写书评

暂无评论

Proposal design and thermodynamic analysis on a novel coal-based power generation system integrated with CO2 capture 3

Proposal design and thermodynamic analysis on a novel coal-b...

引用

3rd International Conference on Electrical engineering and Mechatronics Technology, ICEEMT 2023

作者： Gao, Guobin Mu, Ruiqi Yang, Yali Yan, Lei Gao, Jun Liu, Ming Guoneng Jinjie Energy Co. Ltd Yulin China Xi'an Jiaotong University State Key Laboratory of Multiphase Flow in Power Engineering Xi'an China

ISBN: (纸本)9798350303698

To enhance the energy efficiency and decrease the carbon emissions, a novel coal-based power generation system integrated with CO2 capture is proposed in this study. The S-CO2 cycle is integrated to recover the waster heat of system effectively. The heat transfer processes are well matched, and the irreversibility of heat exchangers in the system is reduced by splitting working medium appropriately. The system simulation and thermodynamic analysis models are developed. The energy and exergy efficiency of system are 51.32% and 50.07%, respectively. The system efficiency increases with the increase of the coal water slurry concentration (CWSC) and the decrease of the gasification temperature. When the CWSC is 35% and gasification temperature is 500 °C, the exergy efficiency of system reaches 51.74% and 50.59%, respectively. © 2023 IEEE.

关键词： Carbon dioxide

来源：评论

学校读者我要写书评

暂无评论

Investigation on the Parallel Computing Technique Using on the Numerical Simulation of Carbon Free Fuel 4

Investigation on the Parallel Computing Technique Using on t...

引用

4th International Conference on Information Science, Parallel and Distributed Systems, ISPDS 2023

作者： Wang, Weibin Wei, Xutao Xi'an Fanyi University Department of Computer Science Xi'an China Xi'an Jiaotong University State Key Laboratory of Multiphase Flow in Power Engineering Xi'an China

ISBN: (纸本)9798350337181

The numerical simulation of the turbulent combustion is identified as one of the most promising methods on the designs of the combustion devices, for example: the internal combustion engine and gas turbine. This mainly depends on the development of parallel computing technique. However, the computational efficiency for different cases on different compute nodes and number of cores still needs to be studied. On the other hand, due to the requirements from the aim of peaking carbon dioxide emissions before 2030 and achieving carbon neutrality before 2060, modern energy system is requesting low carbon or carbon free fuels, such as ammonia (NH3). Therefore, the simulations of ammonia/air flame were performed in present investigation. The comparison between simulation cases on different compute nodes and number of cores illustrates that different cases requires different number of cores to achieve the best computational efficiency. The computational efficiency of each compute nodes are dissimilar, which can decrease the efficiency. Meanwhile, the methods in present study can predict the ammonia/air flames. The initial condition of velocity fluctuation is necessary for simulating turbulent flame. The wrinkles of the flames can be well predicted by the velocity fluctuation initial boundary condition. © 2023 IEEE.

关键词： Computational efficiency

来源：评论

学校读者我要写书评

暂无评论

Sustainability Assessment of Typical Energy Storage Technologies for Peak Shaving Scenarios Based on the Full Life Cycle 36

Sustainability Assessment of Typical Energy Storage Technolo...

引用

36th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2023

作者： Chen, Nana Han, Xiaoqu Li, Yanxin Huang, Xiaofan Li, Jiarui Yan, Junjie State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an China Huadian Electric Power Research Institute Co. Ltd. Beijing China

ISBN: (纸本)9781713874928

With more renewable energy sources (RES) which are inherent intermittent and unpredictable connecting with power grid, various stability problems occur, among which the peak load regulation is the most prominent. Energy storage systems (ESSs) are essential for buffering the electricity grid. Selecting the most suitable energy storage technology among various alternatives is of great importance. In this work, the sustainability of typical energy storage technologies was studied with respect to four aspects for peak shaving scenarios, including technical (i.e. maturity, energy density, round-trip efficiency, duration ranges, life cycles, lifetime and position flexibility), economic (levelized cost of energy, net present value), environmental (i.e. global warming, damage to human health, damage to ecosystems, damage to resource availability) and social (public acceptance) based on the full life cycle. This study evaluated the soft criteria including maturity, position flexibility and public acceptance by Analytic hierarchy process (AHP). Life cycle assessment (LCA) and life cycle cost (LCC) methods were combined to study the life-cycle environmental and economic performance. Technique for order preference by similarity to an ideal solution (TOPSIS) was applied for determining the sustainability prioritization of energy storage technologies. The sensitivity analysis was carried out to investigate the effects of control and economic input parameters on environmental performance and economic performance. In addition, the effects of criteria weights, electricity sources and number of daily cycles were conducted on sustainability ranking of ESSs. The results showed Lithium iron phosphate battery (LIPB) and pumped hydro storage (PHS) had good sustainability performance, which could be the most suitable energy storage technologies for peak shaving scenarios. © (2023) by ECOS 2023 All rights reserved.

关键词： Life cycle

来源：评论

学校读者我要写书评

暂无评论

Plasma catalytic collaborative decomposition of methanol to hydrogen production

引用

International Journal of Hydrogen Energy 2025年 143卷 265-275页

作者： Shuming Li Erjiang Hu Geyuan Yin Zuohua Huang State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an 710049 People's Republic of China

A novel plasma-assisted methanol decomposition kinetic model is developed through experimental investigations which can reasonably predict the species concentration at different voltages. The methanol decomposition does not occur at 600 K without plasma, whereas it initiates at 450 K under plasma conditions. This is attributed to the new reactions between the high-energy electrons and Ar∗ with the methanol under the electric field. However, under plasma alone, H 2 selectivity is low as the formation of CH 3 , which decreases the fluxes of H-abstraction reactions, such as CH 2 OH + H CH 2 O + H 2 . With plasma-catalyst, 15 % increase in H 2 selectivity and 12 % increase in CH 3 OH conversion are achieved at 493 K and methanol tends to be converted more to CH 3 O than to CH 2 OH or CH 3 compared with plasma alone, which increases the CH 3 O adsorbed on the surface of catalyst, facilitating the chain reaction (CH 3 O→CH 2 O→CO + H 2 ) and inhibits the conversion of CH 3 O/CH 2 OH to CH 3 and CH 2 by plasma, and as a result, the CH 3 OH conversion rate and H 2 yield rate increase.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Experimental Investigation on Sodium Migration and Mineral Transformation in Ash Deposit During Gasification of Zhundong Coal Using a Drop Tube Furnace 9th

Experimental Investigation on Sodium Migration and Mineral T...

引用

9th International Symposium on Coal Combustion, ISCC 2019

作者： Liu, Chengchang Wang, Chang’an Wang, Chaowei Du, Yongbo Tang, Guantao Li, Guangyu Che, Defu State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power Engineering Xi’an Jiaotong University Xi’an710049 China

ISBN: (纸本)9789811616563

Zhundong coal has attracted an ever-increasing concern due to its super-huge reserve but high content of alkali metals. Volatilized into the gaseous phase during the gasification process, alkali metals are extremely unfavorable for coal utilization. Gasification technology can promote the large-scale utilization of high-alkali coal. However, few efforts, if any, have been conducted on gasification of Zhundong coal. The present study aimed to elucidate the sodium migration and mineral transformation characteristics in coal ash deposition process under different gasification conditions, while the behavior of sodium migration and mineral transformation were further analyzed using Inductively Coupled Plasma-Atomic Emission Spectrometer (ICP-OES), X-ray diffraction (XRD) and X-ray fluorescence (XRF) techniques. In this paper, the sodium migration characteristics in gasification process under different conditions were investigated by adding three sodium salts (NaCl, Na2CO3 and Na2SO4), kaolin and diatomite into coal, respectively. The effects of ash deposition time on sodium migration and mineral transformation characteristics in ash were also explored. The experimental results showed that the addition of sodium salt could increase the sodium content in the ash to a large extent. Kaolin and diatomite could solidify alkali metals in the gaseous phase during gasification process. As the ash accumulation time increased, the minerals such as chlorine, sulphur, and iron in the gaseous phase were easily bonded to the surface of the ash and reacted to form other crystal phases. The present study can provide guidance for the utilization of Zhundong coal and benefit the development of clean coal technology. © 2022, Tsinghua University Press.

关键词： Coal

来源：评论

学校读者我要写书评

暂无评论

Supersonic shear layer characteristics of two fluids with a splitter plate

引用

International Journal of Advanced Nuclear Reactor Design and Technology 2021年 3卷 1-10页

作者： Bai, Yuping Hong, Yibo Zhao, Quanbin Chen, Weixiong Chong, Daotong State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China

Supersonic shear layer development affects mixing between the primary and secondary fluids in a supersonic ejector substantially. The splitter plate plays a key role in shear layer development in the near-trailing-edge region. In this paper, supersonic shear layers with various splitter plate thicknesses are calculated and analyzed. Two types of instability modes are found when various splitter plate thicknesses are used. The shock wave strength and absolute unstable region determine the instability modes. Shock waves can limit instability development but an absolute unstable region promotes instability development. Velocity thickness growth rates are found to be the result of the merging process between two or more adjacent vortices in the transition region. The number of vortices that merge depends on the ratio of the vortex shedding and nature frequencies. The velocity thickness growth rates are larger under the local instability mode than under the global instability mode since three vortices merge under the former mode but two vortices merge under the latter. This study may provide a helpful reference for the design of supersonic ejectors. © 2021 Xi'an Jiaotong University

关键词： Vortex flow

来源：评论

学校读者我要写书评

暂无评论

Numerical Simulation on Combustion Characteristics of Co-Firing Biomass Syngas and Coal in a 660 MW Utility Tower Boiler 9th

Numerical Simulation on Combustion Characteristics of Co-Fir...

引用

9th International Symposium on Coal Combustion, ISCC 2019

作者： Ma, Shihao Zhang, Yan Zhu, Zhengrong Deng, Lei Che, Defu State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power Engineering Xi’an Jiaotong University Xi’an710049 China

ISBN: (纸本)9789811616563

Utilize the biomass energy and adopt carbon capture and storage technologies could reduce the CO2 emission effectively. Biomass gasification is an effective ways to use the biomass. Co-firing biomass syngas with pulverized coal under oxy-fuel condition in utility boiler can combine the two advantages to reduce the CO2 emission. In this paper, a new proposed combustion mechanism was used to investigate the combustion characteristics of co-firing different types biomass syngas and coal in a 660 MW double reheat tower boiler. The influence of syngas composition and oxy-fuel condition on temperature distributions and flue gas components was analyzed when total input heat of the boiler was steady. The results show that the temperature and the emission of the NO and CO2 decrease in co-firing conditions, the NO mass concentration reduced up to 10.2% in co-firing cases. Biomass syngas with higher H2 and less CO and CH4 composition contributes to lower CO2 emission and higher boiler temperature, which can improve plant performance. The oxy-fuel condition also affects the combustion characteristics to some extent. With the increase of O2 volume fraction, the temperature increases and the O2 consumption decreases. Moreover, the NO mass concentration increases in oxy-fuel combustion when co-firing biomass syngas and coal with a mixing ratio of 0.1. This study offers reference for boiler’s operation and design optimization for biomass syngas co-firing. © 2022, Tsinghua University Press.

关键词： Coal

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：