检索结果-内蒙古大学图书馆

18th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, NURETH 2019

作者： Wang, Kailin Li, Liangxing Xie, Wei Zhang, Shuangbao State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xianning West Road 28# Xi’an city710049 China

The hydraulic performance of lead-bismuth eutectic (LBE) pump is of great importance for the safety aspects concerning lead-alloy cooled fast reactors (LFRs). To investigate the effect of different rotation speed on the performance of axial LBE pump, different rotation speed axial LBE pumps are designed by planar cascade and streamline method with the same mass flow rate and hydraulic head. Ansys BladeGen is used to establish the three-dimensional model of the axial-flow pump. CFD software (Ansys CFX) carry out numerical calculation. Numerical studies are used to compared the performance between two pumps with different rotation speed. To improve the accuracy of CFD simulation, the numerical result is verified by grid independence method and compared with theoretical calculation result. The flow velocity of the liquid LBE have great impact on the design of LBE pump because of the requirement to avoid affect of corrosion. It is found that the maximum flow velocity of low rotation speed pump is about 7.8 m/s, which is lower than the maximum flow velocity of high rotation speed pump in the case of constant volume and performance. Performance of low rotation speed pump meets the requirements of the reactor operating under long-term high load. The research results could be a viable solution used as a reference for the development of LFRs. © 2019 American Nuclear Society. All rights reserved.

关键词： Pumps

来源：评论

学校读者我要写书评

暂无评论

Lithium Extraction from High Magnesium Salt Lake Brine with an Integrated Membrane Technology

SSRN

引用

SSRN 2022年

作者： Ashraf, Muhammad Awais Usman, Muhammad Hussain, Iftikhar Ahmad, Faraz Guo, Shiwei Zhang, Lu State Key Laboratory of Multiphase Complex Systems CAS Key Laboratory of Green Process and Engineering Institute of Process Engineering Chinese Academy of Sciences Beijing100190 PR China University of Chinese Academy of Sciences Beijing100049 China Washington State University United States Department of Mechanical Engineering City University of Hong Kong 83 Tat Chee Avenue Kowloon Hong Kong Key Laboratory of Coal Science and Technology Taiyuan University of Technology Taiyuan030024 China North China Electric Power University Hebei Key Lab of Power Plant Flue Gas Multi-Pollutants Control Department of Environmental Science and Engineering Baoding071000 China Faculty of Economics and Business

Lithium extraction is a great challenge from the high magnesium content salt solution. In this work, an integrated polyamide tight ultrafiltration (UF) and nanofiltration (NF) membranes are systematically investigated to separate Li+ from a high magnesium salt solution. Tight ultrafiltration UA001 and nanofiltration NF270 membranes in the integrated-cascade system not only increased Li+ permeation to 82.5% but also enhanced the high Mg2+ retention to 94.6% from the ternary salt solution of LiCl and MgCl2. The transport model was also developed to calculate the real retention of Li+ and Mg2+, under constant pressure mode. The separation efficiency SFLi/Mg for the ternary salt solution of LiCl+MgCl2+H2O was more than 15 at a constant pressure of 25 bars with an integrated membrane process, which was higher as compared to single-stage UF and NF270 membranes. Moreover, the high Mg2+/Li+ ratio was also reduced from 30 to 1.9 in the integrated-cascade membrane process. © 2022, The Authors. All rights reserved.

关键词： Magnesium compounds

来源：评论

学校读者我要写书评

暂无评论

Wake of a stationary sphere near a wall

引用

Huagong Xuebao/CIESC Journal 2019年第9期70卷 3300-3306页

作者： Li, Xing Bai, Bofeng State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'anShaanxi710049 China

The flow characteristics of the sphere under uniform flow in a large space have been extensively studied, but the influence of the wall on the flow characteristics of the sphere is not clear. The wake of the particle is focused. Results show that there are three regimes of the sphere wake, which are steady wake, unsteady symmetric wake and unsteady asymmetric wake. If Re400, the vortex shedding is not symmetric and becomes chaotic as Reynolds number increases. © All Right Reserved.

关键词： Wakes

来源：评论

学校读者我要写书评

暂无评论

Experimental and numerical study on impinging fuel spray under high-pressure cross-flow condition 14

Experimental and numerical study on impinging fuel spray und...

引用

14th International Conference on Liquid Atomization and Spray Systems, ICLASS 2018

作者： Si, Z. Guo, M. Ashida, Y. Nishida, K. Ogata, Y. Tang, C. Huang, Z. Department of Mechanical System Engineering University of Hiroshima 1-4-1 Kagamiyama Higashi-Hiroshima739-8527 Japan School of Mechanical and Electronic Engineering Wuhan University of Technology 122 Luoshi road Wuhan Hubei430070 China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University 28 Xianning west road Xi'an710049 China

It is certified that the fuel spray is strongly affected by both in-cylinder air flow and piston cavity wall impingement in a direct injection engine. In this study, sprays injected by a valve covered orifice nozzle were tested by a high-speed video camera and a continuous wave laser sheet under a wind-tunnel with cross-flow and pressurized ambience, thereby the spray profiles in vertical and horizontal planes were investigated. Moreover, the experiment results were compared with simulations which was calculated by the validated spray models based on the CONVERGE software. With increase in the cross-flow velocity, the spray tip penetration evidently increased, and the increased cross-flow velocity led to an increase in the vortex height because of the enhanced spray dispersion. Furthermore, the high ambient pressure restrains the spray dispersion and leads to smaller spray tip penetration and vortex height. The outlines of spray with same liquid-to-air momentum flux ratio q can agree with each other in the windward side, nevertheless the droplet diffusion under high cross-flow velocity is distinct in the leeside. At the horizontal plane of y=25mm, a complex vortex movement was observed that resulted in a nonuniform distribution of droplets in the upper part of the spray in the leeward side. From the calculations, in the radial region apart from the impingement point (8mm4mm) hardly moved. © 2018 Solar Turbines Incorporated.

关键词： Continuous wave lasers

来源：评论

学校读者我要写书评

暂无评论

Modulating conductivity type of cuprous oxide（Cu2O） films on copper foil in aqueous solution by comproportionation

引用

Journal of Materials Science & Technology 2019年第8期35卷 1570-1577页

作者： Changwei Tang Xiaohui Ning Jian Li Hui-Lin Guo Ying Yang Shaanxi Provincial Key Laboratory of Electroanalytical Chemistry Key Laboratory of Synthetic and Natural Functional Molecule Chemistry of the Ministry of EducationCollege of Chemistry & Materials ScienceNorthwest UniversityXi'an 710127 China National Demonstration Center for Experimental Chemistry Education Northwest UniversityXi'an 710127 China International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power EngineeringXi'an Jiaotong UniversityXi'an 710049 China

Cuprous oxide(Cu2O)is an attractive material for photoelectrochemical(PEC)hydrogen production or photovoltaic application,because of its appropriate band gap,low material cost and *** this paper,Cu2O films were obtained by comproportionation in acid cupric sulfate solutions with varying concentrations of potassium *** and electrochemical experiments,such as zero-bias photocurrent responses,voltammograms,and Mott-Schottky measurements,show that the Cu2O films grown in low(≤0.75 mol dm^–3)and high(≥1.00 mol dm^–3)nitrate ion concentrations presented n-type and p-type conductivity,*** circuit potential and polarization behavior were monitored to investigate the mechanism of modulating conductivity *** ions consume protons in the plating solution during comproportionation with different concentrations of nitrate ions creating different pH at the Cu2O/solution *** gradient leads to the transformation of Cu2Ofilms conductivity changing from n-type to p-type with increasing the concentration of nitrate ions in the plating *** method could be used to fabricate homojunction electrode on metal substrate for PEC hydrogen production or photoelectric application.

关键词： Cuprous oxide(Cu2O) Comproportionation Semiconductor films Tuning conductivity Photoelectrochemical cell

来源：评论

学校读者我要写书评

暂无评论

The role of rotary liquid-solid two-phase flow in the synergistic behavior between sand erosion and electrochemical corrosion of Ni2FeCrMo0.2 alloy in marine environment

引用

Process Safety and Environmental Protection 2025年 200卷

作者： Luo, Xingqi Xu, Qipeng Wang, Kai Feng, Jianjun Li, Yanhui Liu, Yan Zhang, Xiya State Key Laboratory of Water Engineering Ecology and Environment in Arid Area Xi'an University of Technology No.5 Jinhua South Road Xi'an710048 China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University No.28 Xianning West Road Xi'an710049 China Qinghai Salt Lake Industry Co. Ltd. No.28 Huanghe Road Golmud816000 China

The erosion-corrosion behavior poses a significant threat to marine equipment, driven by complex multi-physics processes such as sand movement, surface erosion, electrochemical reactions, and corrosive ion transport. Aiming at the widely used rotating liquid-solid two-phase flow system in a marine environment, this study investigates the role of flow velocity in the erosion-corrosion behavior of Ni2FeCrMo0.2 alloy. The coupling analysis of multi-component weight loss, electrochemical kinetics, and microstructure characterization clarifies the interactions between fluid flow, sand migration, ion transfer, and damage morphology, revealing the synergistic erosion-corrosion mechanism. The results show that the erosion-corrosion mechanism transfers with flow velocity. At low velocities, the erosion effect on the harder metal matrix is weak due to insufficient kinetic energy of the sand particles. However, the sand-surface impingement on the softer corrosion products and the mass transfer of corrosive ions lead to erosion-enhanced corrosion, which dominates the material damage process. In contrast, at higher velocities, the impact kinetic energy and frequency of sand particles rise, causing the erosion rate to increase exponentially, which surpasses corrosion, making erosion as the dominant damage mechanism at high velocities. These results highlight the critical role of flow velocity in controlling the erosion-corrosion synergy behavior. © 2025 The Institution of Chemical Engineers

关键词： Electrochemical corrosion

来源：评论

学校读者我要写书评

暂无评论

Removal and recovery of SO2and NO in oxy-fuel combustion flue gas by calcium-based slurry 5

Removal and recovery of SO2and NO in oxy-fuel combustion flu...

引用

2020 5th International Conference on Advances in Energy and Environment Research, ICAEER 2020

作者： Cai, Yuyang Ding, Xiaohan Li, Wei Liu, Dunyu Chen, Jun Ni, Mingguo Xu, Kailong Jin, Jing School of Energy and Power Engineering University of Shanghai for Science and Technology Shanghai200093 China Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering University of Shanghai for Science and Technology Shanghai200093 China Department of Computer Science George Mason University Commonwealth of Virginia United States Dongfang Turbine Co. Ltd Deyang618000 China

This study investigates the use of calcium-based slurry for simultaneous removal NO and SO2 from oxy-fuel combustion flue gas, and recovery of the sulfur and nitrogen species in resulting solutions. The experiments were performed in a bubbling reactor in a transient mode under the pressure of 20 bar. The various influencing factors including the CaO amount, carrier gas (N2/CO2), and absorption time on the simultaneous NO and SO2 removal process, and the solution products were studied comprehensively. The results show that the NO2 removal efficiency can be improved by the presence of CO2, and the gas phase HNO2 produces in this process. The addition of CaO has positive effects not only on the NO2 removal efficiency but also on the formation of stable HNO3. With the presence of CO2, CaCO3 is formed in a solution initially. With the decrease of pH, CaCO3 is gradually converted to CaSO4, and in particular CaCO3 can be fully avoided through decreasing the pH of an absorption solution to 1.14. At the same time, the formation of unstable S(IV) and NO2- can be prevented when the solution pH is lower than 1.37. The nitrogen and sulfur compounds in the absorption solution (at pH 1.14) were further separated by the addition of different amounts of CaO. In particular, 95% of SO42- finally can be recovered in the form of CaSO4.2H2O with nitrogen in solution existing as NO3- by controlling the Ca/S ratio at 4.70. The effectiveness of calcium-based slurry on the removal and recovery of SO2 and NO is confirmed. © The Authors, published by EDP Sciences, 2020.

关键词： Sulfur compounds

来源：评论

学校读者我要写书评

暂无评论

Investigation of curvature statistics of turbulent premixed Bunsen flames based on leading points concept 12

Investigation of curvature statistics of turbulent premixed ...

引用

12th Asia-Pacific Conference on Combustion, ASPACC 2019

作者： Zhang, Weijie Wang, Jinhua Xia, Hao Lin, Wenjun Zhang, Meng Huang, Zuohua State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University No. 28 Xian Ning Road Beilin District Xi'an Shaanxi710049 China

In previous studies, it was showed that the leading point, namely, the positively curved flame front, may be vital in controlling the propagation of flame, thus controlling the burning intensity of turbulent premixed flames. This paper is aimed at investigating the morphologies of the leading points under low and relatively high turbulence intensities based on flame curvature statistics. Premixed C3H8/H2/air flames were obtained with a Bunsen burner. Flame front was captured with OH-PLIF technique. The results show prevalent leading points with positive curvatures at low turbulence intensity. Percentage of positive curvatures were observed to increase at lower turbulence intensity. However, with increasing turbulence intensity, such feature can be mitigated or even overpowered with equal probability of negative and positive curvatures. Proper models for leading point are recommended according to the experimental results. However, question remains as to the underlying mechanism of leading point concept. © Asia-Pacific Conference on Combustion, ASPACC *** right reserved.

关键词： Combustion

来源：评论

学校读者我要写书评

暂无评论

Experimental Study on the Characteristics of Effervescent Atomization

引用

Kung Cheng Je Wu Li Hsueh Pao/Journal of engineering Thermophysics 2019年第4期40卷 834-838页

作者： Wang, Wen-Jie Zheng, Xue-Bo Bai, Bo-Feng State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China

In this paper, the characteristics of effervescent atomization are studied experimentally. A high speed camera was used to record the bubbling process and the change of the flow regime in the mixing chamber. Three typical flow regimes were observed, namely, bubble flow, transition flow and annular flow. The particle size of the spray droplet was measured by a laser particle sizer. The droplet diameter distribution curve under typical flow regimes was obtained. Bubble flow and annular flow showed a single peak distribution, while transition flow showed a bimodal distribution. The effects of parameters such as gas-liquid ratio (GLR), liquid mass flow rate and orifice diameter on droplet size were studied. The results showed that the larger the GLR, the larger the liquid mass flow rate and the smaller the orifice diameter, the smaller the SMD. The instability of the atomization process is analyzed. The larger the GLR and the smaller the orifice diameter, the greater the instability. © 2019, Science Press. All right reserved.

关键词： Atomization

来源：评论

学校读者我要写书评

暂无评论

Effect of particle size on the thermal performance of NaNO3/SiC)2/C composite phase-change materials

引用

Particuology 2019年第3期17卷 169-175页

作者： Liang Liu Liqiong Wang Weichun Ge Yanfeng Ge Yun Huang State Key Laboratory of Explosion Science and Technology Beijing Institute of Technology Beijing 100081 China State Key Laboratory of Multiphase Complex Systems Institute of Process Engineering Chinese Academy of Sciences Beijing 100190 China State Grid Liaoning Electric Power Supply Co. Ltd. Shenyang 110004 China

Storage of thermal energy is a key technology for energy conservation and application of renewable energy sources. In this paper, the thermal performance of inorganic composite phase-change materials (PCMs;NaNO3/SiO2/C) is studied under extreme thermal conditions and the effect of raw particle size is examined. We designed a thermal shock test platform with a diffusive combustion system and in-situ infrared thermal imaging. The influences of the heat flux magnitude and exposure time on the performance of the PCMs were examined under vertical thermal shock conditions. Leakage of molten salt in the composite PCMs was observed as the heat flux reached a threshold point. The morphology and thermal properties were characterized by ex-situ SEM, XRD, DSC, and BET. Raw particles with sizes in the range of 105-500 μm were used to synthesize the composite material and examine its role in thermal shock behavior. Our experiments showed that deterioration of the thermal storage density was slowed as the particle size was increased. This work provides useful guidance for improving the anti-thermal shock ability of future material designs.

关键词： Thermal storage Phase change material Particle size Thermal shock Decomposition temperature

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：