检索结果-内蒙古大学图书馆

SSRN 2022年

作者： Wang, Jinzhi Xie, Xiangdong Wang, Yechun Xu, Qiang Wang, Jiang Guo, Liejin State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an710049 China

The flow around cylinder is widely used in industrial applications. In this study, the separation characteristics of gas-liquid two-phase flow around a perforated tube are investigated experimentally. The interface fluctuation process of the gas pocket and liquid slug periodic separation around the perforated tube is presented intuitively using a high-speed camera. The mean value and standard deviation of the void fraction in the wake region are independent of the inlet liquid flow rate. When the flow pattern is plug flow, the air separation efficiency first decreases and then increases with an increase in the inlet void fraction;the separation efficiency increases monotonically when the flow pattern is slug flow. The separation purity and total pressure drop increase with increasing inlet void fraction. Based on the principle of minimum kinetic energy, methods for predicting the void fraction in the wake region, separation purity, air separation efficiency and pressure drop have been developed. The new correlations are based on the Weber number and liquid-phase Reynolds number that are also controlling dimensionless group in determining the void fraction, separation efficiency and pressure drop. The prediction accuracies of the void fraction and separation purity are within ±10% and the prediction accuracies of the separation efficiency and pressure drop are within ±20%, which provides an accurate prediction of the separated flow around the perforated tube. © 2022, The Authors. All rights reserved.

关键词： Void fraction

来源：评论

学校读者我要写书评

暂无评论

Rapid Methane Hydrate Formation in Open-Cell Copper Foam 4th

Rapid Methane Hydrate Formation in Open-Cell Copper Foam

引用

4th International Technical Symposium on Deepwater Oil and Gas engineering and 3rd International Youth Forum on Gas Hydrate, DWOG-Hyd 2021

作者： Wang, Jiajie Yang, Liang Shao, Xinxin Zhang, Hao School of Energy and Power Engineering University of Shanghai for Science and Technology Shanghai200093 China Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering University of Shanghai for Science and Technology Shanghai200093 China

ISBN: (纸本)9789811909597

Rapid methane hydrate formation with high gas storage capacity is very important for the application of natural gas hydrates technology. Three pieces of open-cell copper foam (CF) with different pore densities (or pores per inch, PPI) herein were immersed in sodium dodecyl sulfate (SDS) solution for enhancing methane storage in solid hydrate. The promotion effects of CF on the methane hydrate formation in the metal-embedded systems were investigated via an unstirred tank reactor. The results demonstrated that the surface of CF skeleton is covered with abundant micro holes and micro grooves, which can provide many metal nuclei for gas-water crystallization. The nest-like metal skeleton acts as crisscross "highway" for the crystallization heat transfer. Methane hydrate was quickly formed in the SDS/CF systems, but CF with the pore densities of 5 and 30 PPI was not favorable for conversion of more water to hydrate. Compared with these two composite systems, the SDS solution with the 15 PPI CF were able to store more methane at a faster formation rate. A theoretical model based highly porous two-phase systems was used to predict the effective thermal conductivity (ETC) of the metal foam filled with hydrate. It was found that the ETC of the hydrate/CF composite was significantly enhanced by employing CF matrix, and the low pore density CF had a more positive impact on improving the ETC of the composite. Further comparative experiments conducted at various pressures indicated that the solutions with 15 PPI CF exhibited higher methane storage capacities and larger hydration rates than the simple SDS solution, especially at the low pressure. © 2022, The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.

关键词： Sodium dodecyl sulfate

来源：评论

学校读者我要写书评

暂无评论

Investigation on the Parallel Computing Technique Using on the Numerical Simulation of Carbon Free Fuel

Investigation on the Parallel Computing Technique Using on t...

引用

Information Science, Parallel and Distributed Systems (ISPDS), International Conference on

作者： Weibin Wang Xutao Wei Department of Computer Science Xi'an Fanyi University Xi'an China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an China

The numerical simulation of the turbulent combustion is identified as one of the most promising methods on the designs of the combustion devices, for example: the internal combustion engine and gas turbine. This mainly depends on the development of parallel computing technique. However, the computational efficiency for different cases on different compute nodes and number of cores still needs to be studied. On the other hand, due to the requirements from the aim of peaking carbon dioxide emissions before 2030 and achieving carbon neutrality before 2060, modern energy system is requesting low carbon or carbon free fuels, such as ammonia (NH3). Therefore, the simulations of ammonia/air flame were performed in present investigation. The comparison between simulation cases on different compute nodes and number of cores illustrates that different cases requires different number of cores to achieve the best computational efficiency. The computational efficiency of each compute nodes are dissimilar, which can decrease the efficiency. Meanwhile, the methods in present study can predict the ammonia/air flames. The initial condition of velocity fluctuation is necessary for simulating turbulent flame. The wrinkles of the flames can be well predicted by the velocity fluctuation initial boundary condition.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Application and Optimization of Monte Carlo Method for Simulation of Light Propagation in Biological Tissue

引用

Zhongguo Jiguang/Chinese Journal of Lasers 2025年第9期52卷

作者： Zhang, Hao Liu, Yifeng Wu, Wenjuan Li, Dong Chen, Bin State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Shaanxi Xi’an710049 China

Objective The Monte Carlo (MC) method has become a cornerstone for simulation of light propagation in biological tissues, particularly for applications in laser therapy and medical imaging. However, traditional voxel-based Monte Carlo (VMC) methods often exhibit significant errors when dealing with complex curved surfaces due to the inherent limitations of structured grid discretization. By contrast, tetrahedron-based Monte Carlo (TMC) methods, based on unstructured meshes, offer better adaptability to complex geometries but incur higher computational cost. This study aims to address the trade-off between computational efficiency and accuracy in light propagation simulations by proposing a novel correction method to improve the performance of VMC in handling curved interfaces with large refractive index differences. The objective is to enhance the accuracy of VMC while maintaining its computational efficiency, making it more viable for practical biomedical applications, such as laser treatment and optical diagnosis. Methods This study compares the performance of VMC and TMC in light propagation simulations under different refractive index conditions. We propose a coordinate transformation-based correction method to reduce the errors in VMC caused by the inaccurate handling of reflection and refraction at curved interfaces. The simulations were carried out on a multi-layer skin tissue model with varying refractive index conditions;the laser light was directed at blood vessels embedded within the dermis. The correction method involves transforming the photon direction vector in a way that accounts for the curvature of the interface, thereby improving the accuracy of light photon interactions at the tissue boundaries. Simulations were conducted using MATLAB, and the results were validated through experimental cases, such as diabetic retinopathy laser treatment. The computational setup included an Intel i7-9700K processor and an NVIDIA GTX 3080 graphics card (GPU). Resu

关键词： Laser surgery

来源：评论

学校读者我要写书评

暂无评论

A study on free radical behaviors and reactions in supercritical water using quantum chemical simulation

引用

Journal of Molecular Liquids 2025年 419卷

作者： Ding, Weijing Takahashi, Osamu Wang, Junying Jin, Hui School of Transportation and Vehicle Engineering Shandong University of Technology Shandong Zi'bo255000 China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Shaanxi Xi'an710049 China of Advanced Science and Engineering Hiroshima University Higashi-Hiroshima739-8526 Japan

Supercritical water (SCW) gasification is one of clean and efficient utilization way of biomass, other organic matters or coal for hydrogen production, in which radical reactions studies in SCW are limited but crucial. Density-functional tight-binding (DFTB) molecular simulation is one of efficient and convenient approaches to investigate these microscopic processes. Therefore, free radical reactions in severe SCW environment were investigated via DFTB calculations in this work. The results showed that the order of the free radicals containing bond cleavages reacted in SCW environment was ·OH, ·CH, ·CH2, ·HO2, ·CH3 and ·C6H5 under the same conditions. The reaction processes of different radicals in SCW were obtained. ·H was the most active free radical of reactions. This work is expected to understand the properties of free radicals in SCW better and explore intrinsic reaction mechanisms, which may provide a theoretical support for accomplishing efficient and low-carbon complete SCW gasification for hydrogen production. © 2024 Elsevier B.V.

关键词： Free radical Gasification Hydrogen production Reaction Supercritical Water (SCW)

来源：评论

学校读者我要写书评

暂无评论

Experimental studies of ash film fractions based on measurement of cenospheres geometry in pulverized coal combustion

引用

Frontiers in Energy 2021年第1期15卷 91-98页

作者： Siqi LIU Yanqing NIU Liping WEN Yang LIANG Bokang YAN Denghui WANG Shi'en HUI State Key Laboratory of Multiphase Flow in Power Engineering Department of Thermal EngineeringSchool of Energy and Power EngineeringXi'an Jiaotong UniversityXi'an 710049China

In pulverized coal particle combustion, part of the ash forms the ash film and exerts an inhibitory influence on combustion by impeding the diffusion of oxygen to the encapsulated char core, while part of the ash diffuses toward the char core. Despite the considerable ash effects on combustion, the fraction of ash film still remains unclear. However, the research of the properties of cenospheres can be an appropriate choice for the fraction determination, being aware that the formation of cenospheres is based on the model of coal particles with the visco-plastic ash film and a solid core. The fraction of ash film X is the ratio of the measuring mass of ash film and the total ash in coal particle. In this paper, the Huangling bituminous coal with different sizes was burnt in a drop-tube furnace at 1273, 1473, and 1673 K with air as oxidizer. A scanning electron microscope (SEM) and cross-section analysis have been used to study the geometry of the collected cenospheres and the effects of combustion parameters on the fraction of ash film. The results show that the ash film fraction increases with increasing temperature and carbon conversion ratio but decreases with larger sizes of coal particles. The high fraction of ash film provides a reasonable explanation for the extinction event at the late burnout stage. The varied values of ash film fractions under different conditions during the dynamic combustion process are necessary for further development of kinetic models.

关键词： ash film fraction cenospheres coal combustion fly ash

来源：评论

学校读者我要写书评

暂无评论

Proposal design and thermodynamic analysis on a novel coal-based power generation system integrated with CO2 capture

Proposal design and thermodynamic analysis on a novel coal-b...

引用

Electrical engineering and Mechatronics Technology (ICEEMT), IEEE International Conference on

作者： Guobin Gao Ruiqi Mu Yali Yang Lei Yan Jun Gao Ming Liu Guoneng Jinjie Energy Co. Ltd Yulin China State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an China

To enhance the energy efficiency and decrease the carbon emissions, a novel coal-based power generation system integrated with CO 2 capture is proposed in this study. The S-CO 2 cycle is integrated to recover the waster heat of system effectively. The heat transfer processes are well matched, and the irreversibility of heat exchangers in the system is reduced by splitting working medium appropriately. The system simulation and thermodynamic analysis models are developed. The energy and exergy efficiency of system are 51.32% and 50.07%, respectively. The system efficiency increases with the increase of the coal water slurry concentration (CWSC) and the decrease of the gasification temperature. When the CWSC is 35% and gasification temperature is 500 °C, the exergy efficiency of system reaches 51.74% and 50.59%, respectively.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Integrated Co2 Capture and Conversion by Three-Step Chemical Looping Dry Reforming of Methane

SSRN

引用

SSRN 2025年

作者： Liu, Yunlian Liu, Mingkai Shen, Yuanhui Li, Yang Gai, Zhongrui Zhang, Ruqi Pan, Ying Jin, Hongguang Institute of Engineering Thermophysics Chinese Academy of Sciences Beijing100190 China University of Chinese Academy of Sciences Beijing100049 China State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an710049 China

The integrated CO2 capture and conversion (ICCC) has emerged as a promising and cost-effective pathway for achieving carbon neutrality. However, limited energy-efficient pathways and durable materials for ICCC systems remains challenging. This study proposes a novel approach that synergistically integrates CO2 capture and conversion through a unified chemical framework. The method employs Li-based sorbents for CO2 capture, coupled with CH4-driven sorbent regeneration that is seamlessly integrated with chemical looping dry reforming of methane (CLDRM), enabling in-situ CO2 conversion. By coupling sorbent regeneration with CLDRM, this system enhances decarbonation kinetics through Le Chatelier's principle via continuous CO2 conversion. One-step calcination synthesized Li-based sorbents particles exhibit stable CO2 capture capacity of 5.25 mmol·g-1 within 15 min per cycle, maintaining 7.5-15% operational efficiency over 40 cycles at 600 ℃. In CLDRM, hydrogen radicals from CH4 dissociation promote the conversion of CO2 to intermediates, lowering the apparent activation energy of sorbents regeneration by 29.2%. Through systematic optimization in a fixed-bed reactor, we achieved 90% CO2 uptake and 85% CH4 conversion, with syngas production rates reaching 13.71 mL·min-1·g-1. Notably, the H2/CO molar ratio in syngas stabilizes ~1.6, aligns with iron-based Fischer-Tropsch and methanol synthesis to produce valuable fuels. This integrated system maintains >80% syngas purity with © 2025, The Authors. All rights reserved.

关键词： Activation energy

来源：评论

学校读者我要写书评

暂无评论

Waste heat recovery in the coal-fired power generation integrated with post-combustion

Waste heat recovery in the coal-fired power generation integ...

引用

Electrical engineering and Mechatronics Technology (ICEEMT), IEEE International Conference on

作者： Yali Yang Guiwen Wang Yan Li Yongping Liu Yue Fu Ming Liu Guoneng Jinjie Energy Co. Ltd Yulin China State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an China

Post combustion systems (PCS) are a viable technology option to reduce carbon dioxide in the electricity production. However, the energy-intensive of PCC precludes its wide scale application. As for the optimization of the post combustion system, there is an optimal inlet temperature of the stripper. By optimizing the parameter of the post combustion system, the energy consumption rate of the post combustion system decreased by 1.4 GJ/t CO 2 under 100% THA compared to the original post combustion system. The needed heat by the stripper shows a fall with the decrease of the unit load ratio. However, the heat changes of the post combustion system decrease with the decrease of the unit load ratio under 90% absorption rate. The efficiency penalty can be as low as 4.1% through waste heat recovery.

关键词：

来源：评论

学校读者我要写书评

暂无评论

A simple analytical model to predict liquid unloading in the horizontal gas well

引用

Journal of Hydrodynamics 2021年第5期33卷 1056-1064页

作者： Zhi-bin Wang Jin-quan Ling Tian-li Sun Hong-yan Shi Guo Zhu State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation Southwest Petroleum UniversityChendu 610500China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong UniversityXi'an 710049China No 2 Gas Production PlantSouthwest Oil and Gas CompanySINOPECLangzhong 637400China Infrastructure Department Southwest Oil and Gas CompanySINOPECChengdu 610041China

An accurate prediction of the critical gas velocity for the liquid loading is of great importance for operators to select the tubing diameter for the newly drilled gas wells,or to optimize the production rate for production *** is clear from previous experimental studies of the liquid entrainment rate in the gas core that the liquid is mainly carried in the form of film under the critical condition of the liquid loading *** is more reasonable to establish a mathematical model based on the film reversal rather than based on the droplet *** our previous paper entitled“Prediction of the critical gas velocity of liquid unloading in the horizontal gas well”,a new analytical model was established based on the force balance between the gas-liquid interfacial friction force and the bottom film gravity,but the model is not very convenient to use because of the complexity of calculating the average film *** the present study,a new method is proposed to calculate the average film thickness from the bubble drift velocity in the mixture,so the new analytical model becomes much easier to *** new analytical model is evaluated against 103 sets of experimental data,the data in 124 vertical gas wells and one horizontal gas ***,the effect ofthe liquid loading on the production of the horizontal gas well is also analyzed.

关键词： Horizontal gas well inclined annular flow liquid-film thickness liquid unloading

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：