检索结果-内蒙古大学图书馆

Best estimate plus uncertainty analysis of the China advanced large-scale PWR during LBLOCA scenarios

学校读者我要写书评

暂无评论

International Journal of Advanced Nuclear Reactor Design and Technology 2020年 2卷 34-42页

作者： Chang, Yuhao Wang, Mingjun Zhang, Jing Tian, Wenxi Qiu, Suizheng Su, G.H. Department of Nuclear Science and Technology State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China

China advanced large-scale Pressurized Water Reactor (PWR) implements series of passive safety systems to provide core cooling and decay heat removal in case of some unexpected accidents. The development of reactor best estimate system analysis codes has realized the transition from conservative safety analysis to Best Estimate plus Uncertainty (BEPU) analysis for the purpose of achieving more realistic results and digging larger safety margins. The BEPU analysis during Large Break Loss of Coolant Accident (LBLOCA) has been widely used for the licensing application of Nuclear Power Plants (NPPs). In this paper, the BEPU analysis of China advanced large-scale PWR was performed under the conditions of LBLOCA scenarios employing RELAP5 code. The models of reactor coolant system with all the passive safety systems were established and the influence of uncertainties of important parameters on the Peak Cladding Temperature (PCT) was evaluated. The results show the obtained PTC (1314 K) through the BEPU analysis is far below the 10CFR50.46 PCT acceptance criteria (1477 K) in case of LBLOCA and is also lower than the conservative calculation value (1348 K), indicating a larger safety margin. This work provides a meaningful evaluation method for China advanced large-scale PWR safety assessment. © 2020 Xi'an Jiaotong University

关键词： Pressurized water reactors

Preliminary Conceptual Design with Neutronics and Thermal-Hydraulics Assessments of Fustar

学校读者我要写书评

暂无评论

SSRN 2023年

作者： Zhou, Xingguang Zhang, Dalin Li, Xinyu Lv, Xindi Jiang, Dianqiang Tian, Wenxi Qiu, Suizheng State Key Laboratory of Multiphase Flow in Power Engineering Shaanxi Key Lab. of Advanced Nuclear Energy and Technology School of Nuclear Science and Technology Xi'an Jiaotong University Xi'An710049 China

The fluoride-salt-cooled high-temperature advanced reactor (FuSTAR) is an advanced small modular reactor, which aims to the electric supplement and clean heat production to western China. In this study, neutronics and thermal-hydraulics analysis are also carried out, and established the core layout and material ratio under the near-critical condition. The parameters of the designed core are evaluated quantitatively from various aspects. The results show that FuSTAR has sufficient shutdown depth, the equilibrium cycle is 3.24 years, and the discharge burnup depth is 106 GWd/MtU. The analysis of 1/6 core porous media shows that the peak fuel temperature under normal operating condition is 1009.3 K, which is far below the limit of 1573 K. Relevant design and analysis results can provide the reference for the subsequent small modular FHR design and construction. © 2023, The Authors. All rights reserved.

关键词： Computational fluid dynamics

Temperature dependence photoluminescence properties of ZnSe-based core-shell quantum dots

学校读者我要写书评

暂无评论

Optics Express 2025年第11期33卷 22588-22597页

作者： Zhang, Tingting Ma, Qing Li, Qingping Huang, Lanting Feng, Yuqiong Duan, Hongwei Chen, Xinlei Li, Qinghua Jin, Xiao Bai, Jinke Xu, Bing Key Laboratory of Environmentally Friendly Functional Materials and Devices School of Physics Science and Technology Lingnan Normal University Guangdong Zhanjiang524048 China School of Energy and Power Engineering Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering University of Shanghai for Science and Technology Shanghai200093 China Department of Materials and Chemical Engineering Taiyuan University Taiyuan030032 China

Heavy metal-free ZnSe-based core-shell quantum dots (QDs) are promising emitting material for achieving violet-blue luminescence. Investigating the temperature-dependent variations in the photoluminescence (PL) properties of ZnSe-based QDs will enhance our understanding of the intrinsic factors that influence their diverse luminescence characteristics. Here we select the optimally synthesized ZnSe core QDs with three diameters (4.1, 5.2, and 8.3 nm) and ZnSe/ZnS core-shell QDs to study their temperature-dependent photoluminescence properties. As the sample temperature is increased, the PL intensity decreases, the emission energy redshifts, and the spectral become broader. We observe a reduction in the exciton-longitudinal optical (LO)-phonon coupling constant from 21.7 meV to 16.1 meV as the diameter of ZnSe core QDs increased from 4.1 nm to 8.3 nm. This decrease is associated with a narrower homogeneous broadening of the emission spectrum. Besides, the epitaxial growth of a ZnS wide bandgap shells onto the ZnSe core QDs can effectively isolate the photogenerated excitons away from the inorganic-organic interface, thus reducing the PL peak width and increasing the exciton binding energy of the QDs. Our research provides a valuable addition to the existing studies on the photoluminescence properties of ZnSe-based core-shell QDs. © 2025 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement.

关键词： Atomic emission spectroscopy

Characteristics and Prediction Model of Co-Pyrolysis of Sewage Sludge and Camellia Seed Shell

学校读者我要写书评

暂无评论

SSRN 2022年

作者： Wang, Bo Liu, Yinhe Guan, Yu Feng, Yiwei Pan, Hejitian State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power Engineering Xi'an Jiaotong University Xi’an710049 China

Tar is an undesired product in the process of sewage sludge pyrolysis, which affects the normal operation of the equipment. In this paper, the characteristics of co-pyrolysis of sewage sludge and camellia seed shell for tar reduction and syngas production were explored. The content and composition of tar and pyrolysis gas co-pyrolyzed with different proportions of sewage sludge (JAS) and camellia seed shell samples (CSS) were studied. The weight loss characteristics of the samples were studied by thermogravimetric experiment, and the synergistic effects of different stages were analyzed. The performances of back propagation (BP) neural network and particle swarm optimization-back propagation neural network (PSO-BP) in reflecting the nonlinear relationship between temperature, mixing ratio, heating rate and remaining weight were compared. The results show that the tar yield was the lowest when 40JAS60CSS was pyrolyzed, which could alleviate the serious problems caused by the tar. Compared with the JAS single pyrolysis, the co-pyrolysis of JAS and CSS improved the content of PAHs and reduced the content of aliphatic hydrocarbons in the tar. The inhibition and promotion effects of co-pyrolysis would be transformed into each other with the progress of the pyrolysis, and the transformations were concentrated in the S 2 stage where the weight loss of the sample is the largest. The constructed PSO-BP-30 model contained two hidden layers, each with 12 neurons, which accurately reflected the nonlinear relationship between the temperature, mixing ratio, heating rate and residual weight. © 2022, The Authors. All rights reserved.

关键词： Pyrolysis

Green Preparation of Biodegradable PBAT Foam Modified with Bio-Based Epoxidized Cardanol Using Supercritical Fluid Foaming

学校读者我要写书评

暂无评论

SSRN 2024年

作者： Yuan, Jie Xue, Kun Gao, Xiulu Chen, Yichong Zhao, Ling Hu, Dongdong State Key Laboratory of Chemical Engineering Shanghai Key Laboratory of Multiphase Materials Chemical Engineering School of Chemical Engineering East China University of Science and Technology Shanghai200237 China Xinjiang University China

Poly (butylene adipate-co-terephthalate) (PBAT) foam materials have emerged as potential alternatives to conventional packaging materials. However, they are hindered by issues like lower foaming expansion ratios and shrinkage. A series of biodegradable Epoxidized Cardanol (EC) modified PBAT foams were prepared by using supercritical carbon dioxide (CO2) foaming. The addition of EC can not only enhance crystallization temperature and stiffness, but also improve rheological properties to promote polymer foamability. When the EC content reached 0.6 wt%, lightweight foams with a highest initial expansion ratio (Rv) of 48.4 were produced before shrinkage. N2 as co-blowing agent was introduced to reduce the shrinkage of PBAT foams, resulting in the production of microcellular foam with a stable Rv of 12.9. EC improved the foamability of PBAT while also introducing the co-blowing agent N2 to resist shrinkage, providing insights for large-scale production of lightweight biodegradable foam. © 2024, The Authors. All rights reserved.

关键词： Biodegradable polymers

Chemical Kinetics Simulation on Nitrogen Migration Characteristics During Co-Combustion of Ammonia and Coal Under Deeply Fuel-Air Multistage Conditions

学校读者我要写书评

暂无评论

SSRN 2024年

作者： Dai, Liangxu Wang, Chang'an Hou, Yujie Ma, Guowei Chen, Yongxu Hurera, Abu Zhou, Lei Che, Defu State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power Engineering Xi’an Jiaotong University Xi’an710049 China China Energy Science and Technology Research Institute Co. Ltd. Nanjing210046 China

mmonia, a carbon-free fuel, is attracting an ever-increasing attention. Coal/ammonia co-combustion in coal-fired power plants is considered an effective and fast approach to achieving the global decarbonization goal. However, one bottleneck of the utilization of ammonia fuel is the possible increased NOx emissions. The supply strategy of ammonia can affect the reduction of NOx by NH3. Few studies have explored the influence of ratios of ammonia as a secondary fuel and the secondary air volume on NOx emissions, which could be effective methods to reduce pollution. In this work, a chemical kinetics model was established to study the NOx behaviors during coal/NH3 co-firing in deeply fuel-air multistage conditions. The effects of the ammonia distribution strategies such as the ratio of NH3 as a secondary fuel, the injection position of secondary fuel, and corresponding air distribution with different NH3 co-firing ratios (CR-NH3) on the ammonia reactivity for NOx-reduction were studied. The results show that ammonia should be used as a primary fuel entering the main combustion zone under small CR-NH3 conditions to mitigate the NOx emissions;otherwise, ammonia is inclined to be used as a secondary fuel entering the reduction zone under large CR-NH3 conditions. NOx generation is also found to primarily occur in the burnout zone in fuel-air multistage combustion. Thus, the burnout zone should be given priority to decrease the NOx emissions. With the delay of secondary fuel injection in the reduction zone, the escaping ammonia keeps increasing in the outlet of the reduction zone. Then it is completely burned in the burnout zone, which leads to an increase in NOx emissions. The volume flow rate of NOx shows a downward trend on the whole with the ratio of secondary air increased. The air distribution can alter the function of the reduction zone in both generating and eliminating NO. The findings can provide some guidance to effectively decrease NOx emissions in coal/NH3 co-fi

关键词： Coal

Investigation of Macro-fin Structure on Heat Transfer Performance of Close-Loop R410A Flashing Spray Cooling 15

学校读者我要写书评

暂无评论

Investigation of Macro-fin Structure on Heat Transfer Perfor...

15th Triennial International Conference on Liquid Atomization and Spray Systems, ICLASS 2021

作者： Zhou, Zhifu Ji, Renjie Chen, Bin Thrassos, Panidis State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an710049 China Laboratory of Applied Thermodynamics Mechanical Engineering Aeronautics Department University of Patras Rio Patras26504 Greece

The rapid development in performance, integration and miniaturization of electronics and other high power devices cause huge heat flux values. However, transitional cooling methods can hardly meet the requirement of dissipating effectively the high heat flux at the normal working temperature (usually smaller than 75 oC). The refrigerants flash evaporation spray cooling with phase change has been considered as one of the most promising technologies of heat dissipation for electronic devices and other high power devices due to its high heat removal capability at relatively low surface temperature, cooling uniformity, non-corrosivity. This study presents an experimental study on the heat transfer performance of the close-loop R410A flashing spray cooling, mainly focusing on the influence of macro-fin structure of cooling surface. The flat, square fin, pyramid fin surfaces and a newly designed tetrahedral fin surface are systematically examined. The results indicate that the newly designed tetrahedral fin surface has superior cooling performance than other fin surfaces. © 2021 ICLASS 2021 - 15th Triennial International Conference on Liquid Atomization and Spray Systems. All Rights Reserved.

关键词： Electronic cooling

Development of a Two-Phase flow Solver with Drift-Flux Model Based on Openfoam: Validation Against Single/Two-Phase and Boiling flow

学校读者我要写书评

暂无评论

SSRN 2024年

作者： Wu, Wenqiang Zhang, Dalin Huang, Tao Du, Peng Zhou, Lei Wang, Bo Deng, Jian Qiu, Zhifang Tian, Wenxi Qiu, Suizheng Su, Guanghui State Key Laboratory of Multiphase Flow in Power Engineering Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology School of Nuclear Science and Technology Xi’an Jiaotong University Shaanxi Xi’an710049 China Nuclear Power Institute of China 328 Changshun Avenue Chengdu610213 China

Based on the open-source platform OpenFOAM, this paper implements a two-phase flow solver for drift flux models with realistic closure relations. The solver inherits the numerical method from the OpenFOAM framework, adopts the PIMPLE algorithm, and follows its discrete and matrix-solving criteria, focusing on developing a two-phase flow model and constitutive models. The drift velocity model is based on Ishii and his collaborators’ work. The remaining models, such as wall friction, wall heat transfer, interfacial heat and mass transfer, are taken from TRACE Theory Manual. To fulfill the condition of conjugate heat transfer between fluid and solid, a virtual solid heat transfer function is developed under the premise of a single-domain solver. Extensive and successful validation has been conducted involving single-phase, two-phase, and boiling flow heat transfer phenomena by comparing with experimental data or typical system codes, and the two-phase flow solver's success has been demonstrated in several aspects. © 2024, The Authors. All rights reserved.

关键词： Two phase flow

Thermodynamic Analysis and Optimization of Two-Step Supercritical Water Desorption-Gasification System of Oily Sludge

学校读者我要写书评

暂无评论

SSRN 2024年

作者： Zhang, Chenghao Wang, Gaoyun Zhao, Qiuyang Gao, Yunbo Ge, Zhiwei Jin, Hui Guo, Liejin State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University No. 28 Xianning West Road Xi’an710049 China Technical Inspection Center Sinopec Shengli Oilfield Company Dongying257000 China

The two-step supercritical water desorption-gasification (TSSCWDG) technology can significantly improve the gasification efficiency of oil sludge. However, few works have been conducted to explore the influence of operating parameters on this process. In this paper, a novel desorption-gasification process modeling was constructed based on the supercritical water gasification (SCWG) of oily sludge and the influences of different operating parameters on the system efficiencies were investigated. Increasing the separation temperature and the desorption levels can achieve the rapid improvement of the efficiencies of the TSSCWDG system, but more desorption levels may increase the complexity of the system and the operating cost. The desorption temperature had a relatively small impact on the system efficiencies, but the lower desorption temperature was beneficial to the utilization of industrial waste heat and decreasing the operating cost. Moreover, the TSSCWDG system was optimized and analyzed, and the optimized system had achieved the energy matching between the gasification products and unites, resulting in significant reduction of the irreversible losses in each unit, which the energy efficiency of the optimized system reached 83.4%. This work could provide essential theoretical guidance for the scale-up and design of the industrial application of SCWG of oil sludge with hydrogen production. © 2024, The Authors. All rights reserved.

关键词： Desorption