检索结果-内蒙古大学图书馆

第二届全球华人水动学学术会议

作者： Fan Yang Yuhang Fu Wanyu Chen Yonghua Yan Xueyan Guo Ren Dai School of Energy and Power Engineering University of Shanghai for Science and Technology Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering

The deformation and breakup behavior of a 2D droplet impinging on a solid cylinder was presented by using a multicomponent lattice Boltzmann method（LBM） with pseudopotential *** impact of Bond number（Bo）,surface wettability and the size of the cylinder on the behavior of the droplet were taken into *** show that the behaviors of the droplet can be classified into three types:1) staying on the top of the cylinder;2) breaking up into two daughter droplets and merging again;3)breaking up without the merging *** critical-Bond numbers(Bo and Bo) are defined to classify the three *** is found that Bo increases with the increase of contact angle,while Bo does the *** the size of the cylinder was increased,Bo increases respectively;however,Bo doesn't show such relation with the cylinder *** also shows that it is an effective way to control the evolution of the droplet by setting the wettability of the cylinder surface properly.

关键词： Multicomponent lattice Boltzmann method deformation and breakup of droplet wettability critical Bond number

来源：评论

学校读者我要写书评

暂无评论

First principles investigation of quantum emission from hBN defects

arXiv

引用

arXiv 2017年

作者： Tawfik, Sherif Abdulkader Ali, Sajid Fronzi, Marco Kianinia, Mehran Tran, Toan Trong Stampfl, Catherine Aharonovich, Igor Toth, Milos Ford, Michael J. School of Mathematical and Physical Sciences University of Technology Sydney UltimoNSW2007 Australia Department of Physics GC University Faisalabad Allama Iqbal Road Faisalabad38000 Pakistan International Research Centre for Renewable Energy State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an Shaanxi710049 China School of Physics University of Sydney NSW2006 Australia

Hexagonal boron nitride (hBN) has recently emerged as a fascinating platform for room-temperature quantum photonics due to the discovery of robust visible light single-photon emitters. In order to utilize these emitters, it is necessary to have a clear understanding of their atomic structure and the associated excitation processes that give rise to this single photon emission. Here we perform density-functional theory (DFT) and constrained DFT calculations for a range of hBN point defects in order to identify potential emission candidates. By applying a number of criteria on the electronic structure of the ground state and the atomic structure of the excited states of the considered defects, and then calculating the Huang-Rhys (HR) factor, we find that the CBVN defect, in which a carbon atom substitutes a boron atom and the opposite nitrogen atom is removed, is a potential emission source with a HR factor of 1.66, in good agreement with the experimental HR factor. We calculate the photoluminescence (PL) line shape for this defect and find that it reproduces a number of key features in the the experimental PL lineshape. Copyright © 2017, The Authors. All rights reserved.

关键词： III-V semiconductors

来源：评论

学校读者我要写书评

暂无评论

Characterization of Soot Based on Variable Laser-induced Spectroscopy

Characterization of Soot Based on Variable Laser-induced Spe...

引用

Progress in Electromagnetic Research Symposium

作者： Yanfeng Zhang Jun Chen Huinan Yang Mingxu Su Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering School of Energy and Power Engineering University of Shanghai for Science and Technology

ISBN: (纸本)9781509060948

Laser-induced incandescence (LII) is a non-intrusive method of measuring time-resolved soot particle volume fraction and primary particle sizes. We also can know the component by increasing the laser energy to the regime of laser-induced breakdown spectroscopy (LIBS). More model analysis and experiments should be studied to understand the LII/LIBS.

关键词： Soot laser-induced breakdown spectroscopy LASER ENERGY Pattern analysis Filament lamps primary particulates laser-induced

来源：评论

学校读者我要写书评

暂无评论

Molecular dynamics simulation of the adsorption of sodium dodecyl benzene sulfonate at the decane-water interface

引用

Kung Cheng Je Wu Li Hsueh Pao/Journal of engineering Thermophysics 2016年第5期37卷 1011-1015页

作者： Wen, Bo-Yao Sun, Cheng-Zhen Che, Yu-Quan Bai, Bo-Feng State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China Frist Gas Production Factory PetroChina Xinjiang Oilfield Branch Company Karamay834000 China

Molecular dynamics method was employed to explore the micro-characteristic of decane-water interface with the adsorption of sodium dodecyl benzene sulfonate (SDBS). We analyzed the effect of interfacial molecular arrangement on the micro-structure and properties of oil-water interface from concentration distribution and molecular conformation insights. The results show that the thickness of decane-water interface is 0.378 nm. Both decane molecules and the dipole moment of water molecules tend to be parallel to the interface. The aggregation of surfactants at the interface increases the thickness of oil-water interface, therefore weakening the oil-water interaction and disrupting the directional alignment of water and decane molecules. Meanwhile, we found that there are some cavities at the decane-water interface, combining with the strong electrostatic interaction between hydrophilic groups and water molecules, can aggravate the diffusion of water molecules at the interface, thus enhancing the deformation ability of the interface. © 2016, Science Press. All right reserved.

关键词： Molecular dynamics

来源：评论

学校读者我要写书评

暂无评论

The Development of Candling Module Code in Module In-vessel Degraded Analysis Code MIDAC and the Relevant Calculation for CPR1000 During Large-Break LOCA

引用

Journal of Nuclear engineering and Radiation Science 2016年第2期2卷 021002页

作者： Wang, Jun Fan, Yuqiao Zhang, Yapei Ni, Xinghe Tian, Wenxi Corradini, Michael L. Su, Guanghui Qiu, Suizheng State Key Laboratory of Multiphase Flow in Power Engineering Department of Nuclear Science and Technology Xi’an Jiaotong University Xi’an 710049 China College of Engineering University of Wisconsin-Madison Madison WI 53706

The occurrence of Fukushima has increased the focus on the development of severe accident codes and their applications. As a part of Chinese “National Major Projects,” a module in-vessel degraded analysis code (MIDAC) is currently being developed at Xi’an Jiaotong University. The developing situation of a candling module and relevant calculation for CPR1000 for large break loss of coolant analysis (LOCA) are presented in this paper. The candling module focuses on the melting, moving, and relocation of the melting core materials and necessary thermal hydraulic information. MIDAC’s LOCA accident calculation results of Chinese pressure reactor 1000 (CPR1000) cover the melting mass distribution, peak temperature, and hydrogen generation. The results have been compared with MAAP. Through comparison, the candling module of MIDAC proved to be able to predict the moving trend of the molten material mass relocation in the reactor pressure vessel.

关键词： Melting MIDAC CPR1000 Vessels MAAP severe accident flow (Dynamics) Accidents LOCA Temperature Hydrogen

来源：评论

学校读者我要写书评

暂无评论

Corrigendum to “Huge wave and drop entrainment mechanism in gas–liquid churn flow” [Chem. Eng. Sci. 108 (2013) 638–646]

引用

Chemical engineering Science 2017年 158卷 624-624页

作者： Ke Wang Bofeng Bai Weimin Ma State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Shaanxi 710049 China Royal Institute of Technology (KTH) Stockholm 10691 Sweden

来源：评论

学校读者我要写书评

暂无评论

Movement of Oil-Water-Solid Three-Phase Contact Line under Velocity Gradients

Movement of Oil-Water-Solid Three-Phase Contact Line under V...

引用

2016年大连国际微纳流体和微流控芯片大会(2016 International Conference of Microfluidics, Nanofluidics and Lab-On-A-Chip

作者： Wenxiu ZHENG Chengzhen SUN Bofeng BAI State Key Laboratory of Multiphase Flow in Power Engineering Xi ''an Jiaotong University No.28 Xianning West Road Xi''an Shaanxi China

The movement of three-phase contact line which formed in the oil-water-solid three-phase area is of great importance in a number of applications, such as oil recovery, groundwater remediation, decontamination and deinking The process of oil droplets/film migration and detachment, which are controlled by the moving contact line, has shown its great significance in oil *** are various factors which can drive the contact line to move, such as pressure and electrical driving ***, which will generate a velocity gradient for the flow near the *** this paper, we dedicate to investigate the moving rule of contact line under a velocity gradient from molecular dynamics (MD) insights.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Erosion of water-based fracturing fluid containing particles in a sudden contraction of horizontal pipe

引用

Journal of Physics: Conference Series 2017年第1期916卷

作者： Jiarui Cheng Yinping Cao Yihua Dou Zhen Li State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an China. Department of Mechanical Engineering Xi'an Shiyou University Xi'an China.

A lab experiment was carried out to study the effects of pipe flow rate, particle concentration and pipe inner diameter ratio on proppant erosion of the reducing wall in hydraulic fracturing. The results show that the erosion rate and erosion distribution are different not only in radial direction but also in circumferential direction of the sample. The upper part of sample always has a minimum erosion rate and erosion area. Besides, the erosion rate of reducing wall is most affected by fluid flow velocity, and the erosion area is most sensitive to the change in the diameter ratio. Meanwhile, the erosion rate of reducing wall in crosslinked fracturing fluid is mainly determined by the fluid flowing state due to the high viscosity of the liquid. In general, the increase in flow velocity and diameter ratio not only cause the expansion of erosion-affected flow region in sudden contraction section, but also lead to more particles impact the wall.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Thermodynamic Analysis on of Skid-Mounted Coal-bed Methane Liquefaction Device using Cryogenic Turbo-Expander

引用

IOP Conference Series: Materials Science and engineering 2017年第1期278卷

作者： Shuangtao Chen Lu Niu Qiang Zeng Xiaojiang Li Fang Lou Liang Chen Yu Hou State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an 710049 PR China Xinjiang Coal Research Institute Urumqi 830091 PR China

Coal-bed methane (CBM) reserves are rich in Sinkiang of China, and liquefaction is a critical step for the CBM exploration and utilization. Different from other CBM gas fields in China, CBM distribution in Sinkiang is widespread but scattered, and the pressure, flow-rate and nitrogen content of CBM feed vary significantly. The skid-mounted liquefaction device is suggested as an efficient and economical way to recover methane. Turbo-expander is one of the most important parts which generates the cooling capacity for the cryogenic liquefaction system. Using turbo-expander, more cooling capacity and higher liquefied fraction can be achieved. In this study, skid-mounted CBM liquefaction processes based on Claude cycle are established. Cryogenic turbo-expander with high expansion ratio is employed to improve the efficiency of CBM liquefaction process. The unit power consumption per liquefaction mole flow-rate for CBM feed gas is used as the object function for process optimization, compressor discharge pressure, flow ratio of feed gas to turbo-expander and nitrogen friction are analyzed, and optimum operation range of the liquefaction processes are obtained.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Mechanism study and theoretical simulation on heat split phenomenon in dual-cooled annular fuel element

引用

Annals of Nuclear Energy 2016年 94卷 44-54页

作者： Yangbin Deng Yingwei Wu Yuanming Li Dalin Zhang Wenxi Tian G.H. Su Suizheng Qiu State Key Laboratory of Multiphase Flow in Power Engineering School of Nuclear Science and Technology Xi’an Jiaotong University Xi’an City 710049 China Science and Technology on Reactor System Design Technology Laboratory Nuclear Power Institute of China Chengdu 610213 China

In this study, the mechanisms that cause heat split, a specific phenomenon in dual-cooled annular fuel elements, were investigated. On the basis of thermal resistance analysis, the developing process of heat split phenomenon was summarized. It was found that thermal expansion, fuel densification, swelling, creep, relocation and fission gas release are the original parameters driving the development of heat split. Due to these factors, thermal resistances for heat flux to internal and external channels change with the operating time, which results in heat split. Furthermore, the theoretical simulation on heat split was performed by FROBA-ANNULAR, which is a coupled thermal–mechanical analysis code for dual-cooled annular fuel elements. key parameters at different burnup stages, including gap size, gap conductance, temperature profile, coolant flux and heat flux were obtained. The calculation result shows that the fraction of heat flux to the internal cooling channel experiences complicated variation at the range of 32.9–39.7%. In addition, it was found that heat split does not match with the coolant split, especially at the lower burnup stage. Asymmetric heat transfer occurred because of the imbalance between heat split and coolant split, resulting in a substantial asymmetric temperature profile. Furthermore, heat split exerts an influence on DBNRs of inner and outer channels, although the computational values were still within the allowable limits.

关键词： Dual-cooled annular fuel Heat split FROBA-ANNULAR code MDNBR

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：