检索结果-内蒙古大学图书馆

Coupling Effect of Heat Transfer and flow Resistance in the Rifled Tube Water Wall of a Ultra-Supercritical CFB Boiler

引用

Journal of Thermal Science 2019年第5期28卷 1078-1088页

作者： LI Yaode YANG Dong OUYANG Shijie LIU Dan WANG Wenyu State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an 710049 China North China Electric Power Test and Research Institute Co. Ltd Tianjing 300000 China

The coupling factor is used in this study to characterise the combined effect of the heat transfer and resistance characteristics of a rifled tube. Boundary layer theory is utilised to investigate the relationship between the comprehensive coefficient and Reynolds number in two regions, namely, higher and lower than pseudo-critical enthalpy. Results indicate that mass flux exerts a decisive negative influence on the coupling effect, and the impacts of pressure and heat flux are weak. The overall effect decreases rapidly as the mass flux increases, but it increases in the area behind the quasi-critical enthalpy. The coupling effect is also affected by specific heat ratio, thermal acceleration and buoyancy. The correlations of heat transfer and friction resistance are deduced with high precision according to experimental data.

关键词： supercritical pressure heat transfer frictional resistance coupling effect

来源：评论

学校读者我要写书评

暂无评论

Acoustic Wave Prediction in flowing Steam-Water Two-Phase Mixture

引用

Journal of Thermal Science 1994年第3期3卷 147-154页

作者： Xu Jinliang Chen Tingkuan (state key laboratory of multiphase flow in power engineering, Xi’an Jiaotong University, Xi’an 710049,China) 1. State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University 710049 Xi’an China

The transient two-fluid model has been used to develop a general relation for acoustic waves. The analysis is valid in principle over the whole void fraction region. flow pattern transitions from one flow regime to the other are assumed to occur at certain void fractions. Different correlations are used to calculate the interfacial area and interfacial drag force per unit mixture volume for bubbly flow,slug flow and annular flow respectively. The Vapour-liquid interphase heat flux is derived from the one dimensional Fourier heat conduction equation to evaluate the interphase evaporation or condensatior *** on the present theory, a program has been carried out. Calculations are performed for pressure from 0.07 MPa to 16.0 MPa, void fractions from 0.0 to 1.0. The predicted sound speeds are compare with some experimental data for low pressures, good agreement has been achieved between sound speed predictions and experimental data.

关键词： two-phase flow perturbation wave sound speed

来源：评论

学校读者我要写书评

暂无评论

Void fraction measurement and calculation model of vertical upward co-current air-water slug flow

引用

Chinese Journal of Chemical engineering 2022年第11期51卷 178-198页

作者： Teng Wang Miao Gui Jinle Zhao Qincheng Bi Tao Zhang State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049China School of Nuclear Science and Technology Xi’an Jiaotong UniversityXi’an 710049China

The focus of this paper is on the measurement and calculation model of void fraction for the vertical upward co-current air-water slug flow in a circular tube of 15 mm inner diameter. High-speed photography and optical probes were utilized, with water superficial velocity ranging from 0.089 to 0.65 m·s^(-1)and gas superficial velocity ranging from 0.049 to 0.65 m·s^(-1). A new void fraction model based on the local parameters was proposed, disposing the slug flow as a combination of Taylor bubbles and liquid slugs. In the Taylor bubble region, correction factors of liquid film thickness Cδand nose shape CZ*were proposed to calculate aTB. In the liquid slug region, the radial void fraction distribution profiles were obtained to calculate aLS, by employing the image processing technique based on supervised machine learning. Results showed that the void fraction proportion in Taylor bubbles occupied crucial contribution to the overall void fraction. Multiple types of void fraction predictive correlations were assessed using the present data. The performance of the Schmidt model was optimal, while some models for slug flow performed not outstanding. Additionally, a predictive correlation was correlated between the central local void fraction and the cross-sectional averaged void fraction, as a straightforward form of the void fraction calculation model. The predictive correlation showed a good agreement with the present experimental data, as well as the data of Olerni et al., indicating that the new model was effective and applicable under the slug flow conditions.

关键词： Slug flow Gas-liquid flow Void fraction Measurement Optical probe Model

来源：评论

学校读者我要写书评

暂无评论

Uncertainty and sensitivity analysis of in-vessel phenomena under severe accident mitigation strategy based on ISAA-SAUP program

引用

Nuclear Science and Techniques 2024年第1期35卷 108-123页

作者： Hao Yang Ji-Shen Li Zhi-Ran Zhang Bin Zhang Jian-Qiang Shan School of Nuclear Science and Technology Xi’an Jiaotong UniversityXi’an 710049China State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049China

The phenomenology involved in severe accidents in nuclear reactors is highly ***,integrated analysis programs used for severe accident analysis heavily rely on custom empirical parameters,which introduce considerable ***,in recent years,the field of severe accidents has shifted its focus toward applying uncertainty analysis methods to quantify uncertainty in safety assessment programs,known as“best estimate plus uncertainty(BEPU).”This approach aids in enhancing our comprehension of these programs and their further development and *** study concentrates on a third-generation pressurized water reactor equipped with advanced active and passive mitigation *** an Integrated Severe Accident Analysis Program(ISAA),numerical modeling and uncertainty analysis were conducted on severe accidents resulting from large break loss of coolant *** uncertainty parameters of the ISAA program were meticulously *** Wilks'formula,the developed uncertainty program code,SAUP,was employed to carry out Latin hypercube sampling,while ISAA was employed to execute batch *** analysis was then conducted on two figures of merit,namely hydrogen generation and the release of fission products within the pressure *** calculations revealed that hydrogen production and the fraction of fission product released exhibited a normal distribution,ranging from 182.784 to 330.664 kg and from 15.6 to 84.3%,*** ratio of hydrogen production to reactor thermal power fell within the range of 0.0578–0.105.A sensitivity analysis was performed for uncertain input parameters,revealing significant correlations between the failure temperature of the cladding oxide layer,maximum melt flow rate,size of the particulate debris,and porosity of the debris with both hydrogen generation and the release of fission products.

关键词： Gen-III PWR Severe accident mitigation Wilks’formula Hydrogen Fission products Uncertainty and sensitivity analysis

来源：评论

学校读者我要写书评

暂无评论

Fast design of catalyst layer with optimal electrical-thermal-water performance for proton exchange membrane fuel cells

引用

Journal of Energy Chemistry 2023年第6期81卷 642-655,I0014页

作者： Jing Yao Yuchen Yang Xiongpo Hou Yikun Yang Fusheng Yang Zhen Wu Zaoxiao Zhang School of Chemical Engineering and Technology Xi’an Jiaotong UniversityXi’an 710049ShaanxiChina State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049ShaanxiChina

The catalyst layer(CL)is the core component in determining the electrical-thermal-water performance and cost of proton exchange membrane fuel cell(PEMFC).Systemic analysis and rapid prediction tools are required to improve the design efficiency of *** this study,a 3D multi-phase model integrated with the multi-level agglomerate model for CL is developed to describe the heat and mass transfer processes inside ***,a research framework combining the response surface method(RSM)and artificial neural network(ANN)model is proposed to conduct a quantitative analysis,and further a rapid and accurate *** the help of this research framework,the effects of CL composition on the electrical-thermal-water performance of PEMFC are *** results show that the mass of platinum,the mass of carbon,and the volume fraction of dry ionomer has a significant impact on the electrical-thermal-water *** the selected points,the sensitivity of the decision variables is ranked:volume fraction of dry ionomer>mass of platinum>mass of carbon>agglomerate *** particular,the sensitivity of the volume fraction of dry ionomer is over 50%at these ***,the comparison results show that the ANN model could implement a more rapid and accurate prediction than the RSM model based on the same sample *** in-depth study is beneficial to provide feasible guidance for high-performance CL design.

关键词： Catalyst layer Agglomerate model Sensitivity analysis Response surface Artificial neural network

来源：评论

学校读者我要写书评

暂无评论

Numerical investigation and analysis of heat transfer enhancement in channel by longitudinal vortex based on field synergy principle

引用

中国高等学校学术文摘·能源与动力工程 2008年第1期2卷 71-78页

作者： Wenquan TAO Junmei WU State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an 710049 China School of Environment and Chemical Engineering Xi'an Polytechnic University Xi'an 710048 China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an 710049 China

3-D numerical simulations were presented for laminar flow and heat transfer characteristics in a rectangular channel with vortex generators. The effects of Reynolds number (from 800 to 3 000), the attack angle of vortex generator (from 15° to 90°) and the shape of vortex generator were examined. The numerical results were analyzed based on the field synergy principle. It is found that the inherent mechanism of the heat transfer enhancement by longitudinal vortex can be explained by the field synergy principle, that is, the second flow generated by vortex generators results in the reduction of the intersection angle between the velocity and fluid temperature gradient. The longitudinal vortex improves the field synergy of the large downstream region of longitudinal vortex generator (LVG) and the region near (LVG); however, transverse vortex only improves the syn-ergy of the region near vortex generator. Thus, longitudinal vortex can enhance the integral heat transfer of the flow field, while transverse vortex can only enhance the local heat transfer. The synergy angle decreases with the increase of Reynolds number for the channel with LVG to differ from the result obtained from the plain channel, and the triangle winglet performs better than the rectanglar one under the same surface area condition.

关键词： longitudinal vortex heat transfer enhancement field synergy principle

来源：评论

学校读者我要写书评

暂无评论

Thermal-mechanical coupling behavior analysis of solid-state constrained component in advanced nuclear energy system

引用

Energy 2025年 330卷

作者： Xuan Yang Quan Li Jing Zhang Yingwei Wu Yanan He Chenxi Li Mingjun Wang Kailun Guo Chenglong Wang G.H. Su Wenxi Tian Suizheng Qiu State Key Laboratory of Multiphase Flow in Power Engineering School of Nuclear Science and Technology Xi'an Jiaotong University Xi'an 710049 China Science and Technology on Reactor System Design Technology Laboratory Nuclear Power Institute of China Chengdu 610213 China

With the advantage of phase change heat transfer, heat pipes have the potential to replace flowing coolants for removing fission heat from nuclear reactors. However, the solid-state constrained heat transfer configuration poses mutual constraints between mechanical properties and heat transfer, and their long-term thermal-mechanical coupling behavior requires further investigation. Currently, research on long-term behavior is limited to either individual/local system components or a single physical field. In this paper, an analysis method for coupled thermal-mechanical behavior is proposed and verified, comprehensively considering thermal-mechanical properties, interactions between components, and the fission gas release. This method is employed to analyze the operating characteristics of a solid-state constrained component. The results indicate that prolonged operation leads to complete contact between structural components, generating high contact pressure that enhances heat transfer but increases creep. The release of gaseous fission products, accumulated over operating time, results in a synchronous increase in both gap and external contact pressures, reaching 5.2 MPa and 4.8 MPa, respectively. This process reduces the gas gap conductance, leading to elevated system peak temperatures and a reduction in temperature safety margins by 43 K. After heat pipe failure, continued operation significantly increases the local creep strain, up to 3.9 times that under normal conditions. The gap size and fuel gap pressure should be optimized to enhance gap heat transfer and reduce component creep. Excessive fission gas release should be avoided in fuel configuration. Reducing the system power following a single heat pipe failure can mitigate component creep and extend the operational lifespan.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Layered sphere-shaped TiO_2 capped with gold nanoparticles on structural defects and their catalysis of formaldehyde oxidation

引用

Journal of Environmental Sciences 2016年第1期28卷 77-85页

作者： Chunyan Ma Guanglong Pang Guangzhi He Yang Li Chi He Zhengping Hao Department of Environmental Nano-materials Research Center for Eco-Environmental Sciences Chinese Academy of Sciences Department of Environmental Science and Engineering State Key Laboratory of Multiphase Flow in Power EngineeringSchool of Energy and Power Engineering Xi'an Jiaotong University

We describe here a one-step method for the synthesis of Au/TiO2 nanosphere materials,which were formed by layered deposition of multiple anatase TiO2 *** Au nanoparticles were stabilized by structural defects in each TiO2 nanosheet,including crystal steps and edges,thereby fixing the Au-TiO2 perimeter *** transfer occurred along the gaps between these TiO2 nanosheet layers and in contact with catalytically active sites at the Au-TiO2 *** doped Au induced the formation of oxygen vacancies in the Au-TiO2 *** vacancies are essential for generating active oxygen species（-＊O^-） on the TiO2 surface and Ti^3＋ ions in bulk *** ions can then form Ti^3＋-O^--Ti^4＋species,which are known to enhance the catalytic activity of formaldehyde（HCHO） *** studies on structural and oxygen vacancy defects in Au/TiO2 samples provide a theoretical foundation for the catalytic mechanism of HCHO oxidation on oxide-supported Au materials.

关键词： Layered Au/TiO2 nanospheres Structural defects Oxygen vacancy defects Reaction mechanism Formaldehyde oxidation

来源：评论

学校读者我要写书评

暂无评论

Mxene-Derived Ni/Tio2-X/Ti3c2 Catalyst for Enhanced Photothermal Co2 Methanation: Unraveling the Roles of Photoexcited Carriers

SSRN

引用

SSRN 2025年

作者： Sun, Fan Xin, Yu Xing, Xueli Lou, Jiahui Wang, Qiliang Hong, Hui International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an710049 China Institute of Engineering Thermophysics Chinese Academy of Sciences Beijing100190 China School of Aeronautics and Astronautics University of Chinese Academy of Sciences Beijing100049 China Huaneng Clean Energy Research Institute Beijing102209 China Shandong Institute of Advanced Technology Jinan250100 China Department of Architecture and Built Environment University of Nottingham NottinghamNG7 2RD United Kingdom Institute of Engineering Thermophysics China

Photothermal catalysis has emerged as a promising approach for CO2 conversion, which combines photo and thermal energy to drive catalytic reactions efficiently. While light can lower activation barriers and enhance reaction rates, the interplay between light and heat within the catalytic framework remains largely unexplored. In this study, we investigate the critical role of photoexcited carriers in enhancing catalytic performance under solar irradiation, unraveling their contribution to the CO2-to-CH4 conversion process. A multilayer accordion-like Ni/TiO2-x/Ti3C2 catalyst, which exhibits excellent photothermal and photoelectric response characteristics was fabricated for efficient photothermal CO2 methanation. Experimental results demonstrated that introduction of light during thermal catalysis markedly enhanced the CO2 conversion rate, with a 55% increase achieved at 275 ºC. Furthermore, the required temperature for maximum CO2 conversion rate was reduced by 50 ºC compared to the thermal-driven process. Meanwhile, the effects of concentrated ratio and incident wavelength on CO2 conversion were also examined, revealing a synergistic effect between photogenerated carriers and thermal energy. Further characterizations, including steady-state and transient photoluminescence spectroscopy, in-situ XPS, in-situ EPR, in-situ DRITFs, were employed to elucidate the enhancement mechanisms of photogenerated carriers in the catalytic reaction. At the same time, an outdoor experimental prototype was developed to verify the feasibility of photogenerated carrier-thermal synergistically driven CO2 methanation. The findings provide valuable insights into the role of photo-generated carriers in photothermal CO2 methanation, offering new perspectives for the design of efficient photothermal catalysts and advancing solar catalytic CO2 conversion technologies. © 2025, The Authors. All rights reserved.

关键词： Methanation

来源：评论

学校读者我要写书评

暂无评论

Synergistic effect of oxygen species and vacancy for enhanced electrochemical CO_(2) conversion to formate on indium oxide

引用

eScience 2024年第3期4卷 134-141页

作者： Tengfei Ma Zihao Jiao Haoran Qiu Feng Wang Ya Liu Liejin Guo International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power EngineeringXi'an Jiaotong UniversityXi'an 710049China

Indium-based oxides are promising electrocatalysts for producing formate via CO_(2) reduction reaction,in which*OCHO is considered the key ***,we identified that the*COOH pathway could be preferential to produce formate on In_(2)O_(3)of In/In_(2)O_(3) heterojunction due to the synergistic effect of oxygen species and ***,*CO_(2) and *COOH were observed on In_(2)O_(3) and related to formate production by in situ Raman *** theoretical calculations further demonstrated that the energy barrier of the*COOH formation on In_(2)O_(3) was decreased in the presence of oxygen vacancy,similar to or lower than that of the*OCHO formation on the In *** a result,a formate selectivity of over 90%was obtained on prepared In/In_(2)O_(3) heterojunction with 343±7mAcm^(-2) partial current ***,when using a Si-based photovoltaic as an energy supplier,10.11%solar-to-fuel energy efficiency was achieved.

关键词： Electrocatalytic CO_(2)reduction Formate In_(2)O_(3) Oxygen species Oxygen vacancy

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：