检索结果-内蒙古大学图书馆

The 2015 2nd International Conference on engineering Technology and Application

作者： Yong'an Zhao Wenbin Cai Lu Cui Jiarui Cheng Yihua Dou School of Mechanical Engineering Xi'an Shiyou University State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University School of Mechanical Engineering Xi'an Shiyou University

Hydraulic fracturing is a new technique which is used in oil yield to maximize its own *** pumping of fracturing slurry flow through tubing collar can cause considerable mass loss of inner surface *** may pose a significantly potential risk even a well ***,the erosion phenomenon is particularly serious in the structure of variable *** simulation in this paper was used to get particle impact parameters,and it is combined with jet experiments to find out the main factors of BG-13 Cr mass ***,the equation with experimental data was applied to predict erosion rate of premium connection cross-over joint inner wall.

关键词： premium connection erosion rate numerical simulation Jet flow experiments

来源：评论

学校读者我要写书评

暂无评论

Numerical Simulation on the Laser Induced Oxygen Spark under Different Ambient Conditions

引用

Energy Procedia 2015年 75卷 2409-2414页

作者： Liu Jiping Chen Keqiang Zhang Xiaobo Wang Jinshi Yan Junjie Yoshiro Deguchi Moe Key Laboratory of Thermo-Fluid Science and Engineering Xi’an Jiaotong University Xi’an 710049 China State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an 710049 China Department of Mechanical Engineering The University of Tokushima Tokushima 770-8501 Japan

As a new type of ignition technique, laser induced spark ignition can be widely used in the ignition system of internal combustion engines and aero-engines. In this paper, laser induced oxygen spark evolution has been numerically studied with a two-dimensional, unsteady, multi-components and time-accurate model under different ambient temperatures and pressures. The chemical kinetics between species has been considered. A commercial software Fluent is used to solve the problem. Results show that both ambient conditions have great effect on the maximum temperature and maximum pressure of oxygen spark initially, but the effect decreases with time going on. The maximum velocity and maximum electron number density are also prominently influenced by ambient conditions. For the relationship between shock wave radius and time, ambient temperature plays an important role while ambient pressure is insignificant. These results above will be the foundation for the applications of laser induced spark ignition in the future.

关键词： laser induced ignition Oxygen Spark Ambient Factors Numerical Simulation

来源：评论

学校读者我要写书评

暂无评论

Comparison of hydrogen generation rate between cora-13 test and MELCOR simulation: Clad solid-phase oxidation models using self-developed code MYCOAC

引用

Nuclear Technology 2015年第1期192卷 25-34页

作者： Wang, Jun Corradini, Michael L. Haskin, Troy Zhang, Yapei Lu, Qing Tian, Wenxi Su, Guanghui Qiu, Suizheng Xi'an Jiaotong University State Key Laboratory of Multiphase Flow in Power Engineering Xi'an710049 China University of Wisconsin-Madison College of Engineering MadisonWI53706 United States Nuclear Power Institute of China Chengdu610041 China

To better understand the MELCOR oxidation and degradation models, past work compared the MELCOR model to a CORA experiment (CORA Test 13). These MELCOR analyses specifically focused on fuel bundle heatup and clad oxidation when compared to CORA test data. The comparison allowed the authors to investigate differences between hydrogen generation data and simulation results. Several potential reasons were considered for hydrogen generation rate differences, including MELCOR input power, heat transfer modeling, the clad solid-phase oxidation model, and the gaseous steam diffusion model. This work focuses on the possible uncertainty in the clad oxidation models used in MELCOR. First, the MELCOR nodalization approach for the CORA test was reviewed. Then, the temperature history and spatial variation were examined. One main focus was to consider other clad solid-phase oxidation models to compare the MELCOR models. This was accomplished by developing a separate model, MYCOAC, using MELCOR temperature predictions as input. Finally, the mass transfer resistance of steam diffusion to the clad surface was examined and found to be a small effect. While the Baker-Just solid-phase oxidation model showed better agreement with CORA data at low temperatures, the conclusion in this paper is that the oxidation models are not the major source of uncertainty in hydrogen generation rate differences. Future work will focus on heat transfer modeling of the CORA test.

关键词： Diffusion

来源：评论

学校读者我要写书评

暂无评论

Progress in hydrogen enriched hydrocarbons combustion and engine applications

引用

Frontiers in Energy 2014年第1期8卷 73-80页

作者： Zuohua HUANG Jinhua WANG Erjiang HU Chenglong TANG Yingjia ZHANG State Key Laboratory of Multiphase Flow in Power Engineering Xi'anJiaotong University Xi'an 710049 China

The paper summarized the work on hydrogen enriched hydrocarbons combustion and its application in engines. The progress and understanding on laminar burning velocity, flame instability, flame structure flame and chemical kinetics were presented. Based on funda- mental combustion, both homogeneous spark-ignition engine and direct-injection spark-ignition engine fueled with natural gas-hydrogen blends were conducted and the technical route of natural gas-hydrogen combined with exhaust gas recirculation was proposed which experimen- tally demonstrated benefits on both thermal efficiency improvement and emissions reduction.

关键词： hydrogen enriched hydrocarbon combustion,fundamental study engine application

来源：评论

学校读者我要写书评

暂无评论

Novel flow behaviors induced by a solid particle in nanochannels: Poiseuille and Couette

引用

Chinese Science Bulletin 2014年第20期59卷 2478-2485页

作者： Cheng-Zhen Sun Wen-Qiang Lu Bo-Feng Bai Jie Liu State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University College of Physical Sciences University of Chinese Academy of Sciences

We conducted a molecular dynamics(MD)simulation to address the novel flow behaviors induced by a solid particle in *** basic flows,i.e.,Poiseuille and Couette,are involved in this *** Poiseuille flow,the distribution of number density exhibits fluctuations in the center of channel and near the walls,which are caused by the strong interactions from the atoms of particle and *** stronger external driving forces,the fluid atoms move toward the center of channel and some cavities appear in the fluidic *** external driving forces and bigger particles make the fluid moving quickly in *** Couette flow,the particle rotates under the velocity difference among particle atoms in the shear *** fluid atoms near the walls become infrequent and move to the center of *** velocities of the centrally-located fluid atoms decrease owing to the particle,resulting in an untypical non-linear Couette *** summary,the solid particle brings new fluid–solid interface and interactions,which induce several novel behaviors in nanochannel flows.

关键词：流动行为纳米通道固体粒子 Poiseuille流诱发 Couette流强相互作用固体颗粒

来源：评论

学校读者我要写书评

暂无评论

Simulation of the PHEBUS FPT-1 experiment using MELCOR and exploration of the primary core degradation mechanism

引用

Annals of Nuclear Energy 2015年 85卷 193-204页

作者： Jun Wang Michael L. Corradini Wen Fu Troy Haskin Yapei Zhang Wenxi Tian Guanghui Su Suizheng Qiu State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an 710049 China College of Engineering The University of Wisconsin-Madison Madison 53706 United States Institute of Nuclear and New Energy Technology Tsinghua University Beijing 100084 China

Core degradation evaluation of probability, progression and consequences of a core degradation accident is critical for evaluation of risk as well as its mitigation. However, research and modeling of severe accidents to date are limited, and their accuracy in predicting severe accident consequences is still insufficient. It is therefore important to explore the mechanisms of core degradation and to develop mitigation measures for severe accidents. PHEBUS FPT1 is a typical and classic core degradation experiment. MELCOR is a world famous severe accident analysis code developed by Sandia National Lab that has seen wide application, a broad user base, and a number of supporting experiments. The PHEBUS experiment was simulated using MELCOR in this paper. Experimental data on, thermal power and steam mass flow rates are used to determine average pressure, energy distribution, molten mass, temperature of the fuel, and hydrogen generation. Data from the PHEBUS experiment and Cho’s calculations are used to compare the average pressure, several fuel temperatures and the hydrogen generation rate. The results confirm the validity of MELCOR’s simulation of the PHEBUS experiment. The temperature distribution of the core is provided. These results are used to determine the mode and behavior of core degradation with the intent of building a foundation for further research.

关键词： PHEBUS FPT1 MELCOR Core degradation

来源：评论

学校读者我要写书评

暂无评论

Improvement on Quantitative Measurement of Fly Ash Contents Using Laser-Induced Breakdown Spectroscopy

引用

Journal of flow Control, Measurement & Visualization 2015年第1期3卷 10-21页

作者： Zhenzhen Wang Yoshihiro Deguchi Hiroaki Watanabe Ryoichi Kurose Junjie Yan Jiping Liu State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an China Graduate School of Advanced Technology and Science The University of Tokushima Tokushima Japan Energy Engineering Research Laboratory The Central Research Institute of Electric Power Industry Kanagawa Japan Department of Mechanical Engineering and Science Advanced Research Institute of Fluid Science and Engineering Kyoto University Kyoto Japan

Contents of fly ash are important factors for the operation of coal-fired plants. Real-time monitoring of coal and fly ash such as unburned carbon in fly ash can be an indicator of the combustion conditions. Because of the strong signal intensity and the relative simplicity of the LIBS (Laser- Induced Breakdown Spectroscopy) technique, LIBS can be applicable for real-time composition measurement of coal and fly ash. This research presented here focused on the clarification of the effects of plasma temperature and coexisting materials on quantitative measurement of fly ash contents. Quantitative capability of LIBS was improved using the proposed plasma temperature correction method. The CO2 effect was also discussed to accurately evaluate unburned carbon in fly ash in exhausts. Using the results shown in this study, quantitative measurement of fly ash contents has been improved for wider applications of LIBS to practical fields.

关键词： Laser-Induced Breakdown Spectroscopy Fly Ash Temperature Correction CO2 Effect

来源：评论

学校读者我要写书评

暂无评论

Influence of transient thermal response of solid wall on bubble dynamics in pool boiling

引用

Journal of Computational multiphase flows 2014年第3期6卷 313-327页

作者： Zhang, Liang Li, Zhen-Dong Li, Kai Li, Hui-Xiong Zhao, Jian-Fu Beijing100190 China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Shaanxi710049 China Beijing102209 China

Numerical simulation of single bubble pool boiling process including transient thermal response of solid wall is performed using the ghost fluid method and the level set method for the sharp interface representation. The results show that non-physical initial condition in the numerical simulation deeply affects the process of bubble growth, and then multi-cycle simulation is necessary to eliminate its influence. It is shown by the present results that two nucleate criteria, i.e. constant waiting time and constant nucleate superheat, for determining the appearance time for the subsequent bubble lead to the same quasi-steady process of bubble growth if they are matched with each other. A periodically expanding and receding thermal "hollow" can be observed inside solid wall underneath the growing bubble. The recovery of the temperature on the nucleate site and the thermal boundary layer near the heating surface is influenced by transient heat conduction inside solid wall, which can affect evidently bubble thermal dynamics and heat transfer.

关键词： Numerical methods

来源：评论

学校读者我要写书评

暂无评论

Au@SiO_2 core/shell nanoparticle-decorated TiO_2 nanorod arrays for enhanced photoelectrochemical water splitting

引用

Chinese Science Bulletin 2014年第18期59卷 2191-2198页

作者： Jianan Chen Miao Yu Yuhao Wang Shaohua Shen Meng Wang Liejin Guo International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power EngineeringXi’an Jiaotong University School of Chemical Engineering and Technology Harbin Institute of Technology

To improve the separation efficiency of photoinduced charge carries,Au@SiO2nanoparticles(NPs)with core–shell structure were loaded onto the surface of TiO2nanorods grown on fluorine-doped tin oxide substrate by a facile two-step *** resulted Au@SiO2/TiO2photoanodes were characterized by X-ray diffraction,scanning electron microscopy,transmission electron microscopy,as well as photoelectrochemical *** with pristine TiO2nanorod film,the Au@SiO2/TiO2films showed remarkable enhancement in photoelectrochemical water splitting,with incident photonto-current conversion efficiency increasing from 31%to37%at 380 nm at 0.7 V versus saturated calomel *** could be interpreted by the effect of metallic surface plasmon resonance of Au@SiO2NPs,which would generate an intense electromagnetic field with spatially nonhomogenous distributed *** a result,the charge carriers generated in the near-surface region of TiO2nanorods could be easily *** modification method based on the effect of metallic surface plasmon resonance for promoted charge carrier separation provides a promising way to develop semiconductor photoelectrodes with high solar water-splitting performance.

关键词：二氧化硅纳米粒子二氧化钛纳米棒电解水表面等离子体共振效应纳米颗粒金属 TiO2薄膜

来源：评论

学校读者我要写书评

暂无评论

Experimental and modeling study on auto-ignition of DME/ n -butane blends under engine relevant pressure

Experimental and modeling study on auto-ignition of DME/ n -...

引用

SAE 2014 World Congress and Exhibition

作者： Jiang, Xue Zhang, Yingjia Pan, Lun Man, Xingjia Huang, Zuohua State Key Laboratory of Multiphase Flow in Power Engineering Xi'An Jiaotong University Xi'an 710049 China

In this study, the ignition delay times of DME/n-C4H 10 fuel blends (neat DME, 50/50 and neat n-C4H 10) diluted with argon were measured behind reflected shock waves. The experiments were performed in the temperature range of 1250 - 1600 K, at pressure of 2.0 MPa and equivalence ratios from 0.5 to 2.0. A latest kinetic mechanism NUIG Aramco Mech 1.3 was validated against the present ignition data and used to conducted chemical kinetic analysis. Different equivalence-ratio- dependent was exhibited at different temperature regimes for DME, n-C 4H10, and their blend. Fuel flux analysis, sensitive analysis and mole fraction analysis were carried out for understanding the interaction between the ignition chemistries of DME and n-C4H 10. Copyright © 2014 SAE International.

关键词： Shock waves

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：