检索结果-内蒙古大学图书馆

14th International Conference on Mechanical and Aerospace Engineering, ICMAE 2023

作者： Liu, Xiao Wang, Yinhu Yang, Yiyan Shi, Lei Yan, Dekun Xi'An Jiaotong University State Key Laboratory of Multiphase Flow in Power Engineering Xi'an China Beijing Institute of Long March Vehicle Beijing China Northwestern Polytechnical University Science and Technology on Combustion Internal Flow and Thermal-structure Laboratory Xi'an China

ISBN: (纸本)9798350340327

Multi-components rocket-based combined cycle (RBCC) engine is widely applied in most two-stage-To-orbit program due to stable operation performance under variable flight conditions. Present researches numerically compared RBCC's performance under ramjet mode and scramjet mode, respectively, by using two fuel system, hydrogen and kerosene together with a \mathrm{k}-\omega SST turbulence model. Researches showed that the combustor area ratio should be increased to keep stable pressure difference balance between inflow and flame because of higher caloric value using hydrogen. Distributed heat addition method is benifit for overall performance improvement when using hydrogen. Different from using kerosene, head should be delayedly added in combustor downtream under scramjet mode. Moreover, the advanced heat addition amount should be decreased under ramjet mode to ensure effective isolator operation. © 2023 IEEE.

关键词： Hydrogen

来源：评论

学校读者我要写书评

暂无评论

Recent advances in nonmetallic atom-doped metal nanocrystals:Synthesis and catalytic applications

引用

Chinese Chemical Letters 2021年第9期32卷 2679-2692页

作者： Ruiyun Guo Ke Zhang Shangdong Ji Yangzi Zheng Mingshang Jin Frontier Institute of Science and Technology and State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong UniversityXi'an 710049China

Metal nanocrystals have been recognized as the main catalytic materials in many fields,but insufficient activity and stability,as well as high prices,have limited their large-scale potential *** one of the extremely promising alternatives toward metal in boosting their catalytic performance,nonmetallic atoms-doped metal nanocrystals have recently received extensive attention because of their high efficiency,chemical and structural durability,abundant reserve,and low *** this review,we highlight the most recent progress in this field and provide insights into their catalytic *** metalnonmetal nanocrystals prepared by doping metal nanocrystals with nonmetallic atoms are introduced and classified based on the types of nonmetallic atoms,including metal hydrides,borides,carbides,nitrides,oxides,phosphides,and ***,their applications in catalysis,especially in electrocatalysis and organic catalysis,have been summarized and ***,the conclusions and perspectives are given for the catalysis-driven rational design of metal-nonmetal nanocrystals in this minireview.

关键词： Nonmetallic atom-doping Metal-nonmetal nanocrystals Organic catalysis Electrocatalysis Catalyst design

来源：评论

学校读者我要写书评

暂无评论

Molecular Dynamics Simulation Investigation of the Solubility Parameter of Supercritical Carbon Dioxide-Cosolvent

Molecular Dynamics Simulation Investigation of the Solubilit...

引用

International Multidisciplinary Conference on Computer and Energy Science (SpliTech)

作者： Junying Wang Hui Jin State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an China

ISBN: (数字)9789532901351

ISBN: (纸本)9798350390797

In this work, solubility parameters of the supercritical carbon dioxide (SC-CO2) system and the SC-CO2 adding cosolvent systems were calculated using molecular dynamics simulation. How temperature and pressure changes affected the solubility parameter were studied by molecular dynamics simulation. In addition, the mechanism of interaction between cosolvent and SC-CO2 was investigated. It was discovered that the SC-CO2 solubility parameter rose with rising pressure at constant temperature and fell with rising temperature at constant pressure. Additionally, it is obvious that increasing the solubility parameter of the SC-CO2 system as a whole can be achieved by adding a specific quantity of cosolvent. The solubility parameter of the SC-CO2-cosolvent system increased with increasing cosolvent content. The addition of cosolvent to improve the solubility parameter works by increasing the combined system's polar strength. The hydrogen bonding interaction energy has the greatest impact on the increase of solubility parameter.

关键词： Ethanol Hydrogen Carbon dioxide Bonding Carbon

来源：评论

学校读者我要写书评

暂无评论

Boosting charge transfer via interface charge reconstruction between amorphous NiFe-LDH and crystalline NiCo_(2)O_(4)for efficient alkaline water/seawater oxidation

引用

Nano Research 2024年第6期17卷 4856-4863页

作者： Zhonghang Xing Yi Zhao Yunhai Wang Xiaohe Liu Zhiqiang Guo Qingyun Chen International Research Center for Renewable Energy and State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049China Department of Environmental Science and Engineering Xi’an Jiaotong UniversityXi’an 710049China China School of Geology and Environment Xi’an University of Science and TechnologyXi’an 710049China Changqing Engineering Design Co. Ltd.Xi’an 710018China

Electrocatalysts with optimal efficiency and durability for the oxygen evolution reaction(OER)are becoming increasingly important as the demand for alkaline water/seawater electrolysis technology ***,a novel rose-shaped NiFe-layered double hydroxide(LDH)/NiCo_(2)O_(4)composed of amorphous wrinkled NiFe-LDH and highly crystalline NiCo_(2)O_(4)was synthesized with rich *** unsaturated metal sites are generated due to significant charge reconstruction at the heterointerface between the crystalline and amorphous *** metal sites could trigger and provide more active *** density functional theory(DFT)reveals that a new charge transfer channel(Co-Fe)was formed at the heterointerface between NiFe-LDH as electron acceptor and NiCo_(2)O_(4)as electron *** new charge transfer channel boosts interfacial charge transfer and enhances catalytic *** NiFe-LDH/NiCo_(2)O_(4)/nickel foam(NF)drives current densities of 10 and 100 mA·cm−2 with overpotentials of 193 and 236 mV,*** composite electrode demonstrates a fast turnover frequency(0.0143 s−1)at 1.45 V ***(RHE=reversible hydrogen electrode),which is 5.5 times greater than pure NiCo_(2)O_(4),suggesting its superior intrinsic ***,NiFe-LDH/NiCo_(2)O_(4)/NF electrode exhibited negligible degradation after 150 h of uninterrupted running in alkaline seawater *** study introduces a method for preparing high-efficiency electrocatalysts utilized in alkaline water/seawater electrolysis.

关键词： NiFe-layered double hydroxide(LDH)/NiCo_(2)O_(4)/nickel foam(NF) heterogeneous interfaces charge reconstruction water/seawater electrolysis

来源：评论

学校读者我要写书评

暂无评论

Thermo-Hydraulic Characteristics of Non-Isothermal Batch Transportation Pipeline System with Different Inlet Oil Temperature

引用

Journal of Thermal Science 2023年第3期32卷 965-981页

作者： CHEN Zhimin YUAN Qing JIANG Weixin LI Zongze YU Bo School of Mechanical Engineering Beijing Institute of Petrochemical TechnologyBeijing 102617China School of Chemical Engineering and Technology Xi'an Jiaotong UniversityXi'an 710049China Faculty of Environment and Life Beijing University of TechnologyBeijing 100124China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong UniversityXi'an 710049China

The batch transportation process of several kinds of crude oil is accomplished by an entire coupled pipeline system,which exhibits complex thermo-hydraulic *** on the coupled characteristics among soil,pipelines and devices(including pumps,heating furnaces and valves),a coupled simulation model of batch transportation for the crude oil pipeline system is established,and a novel coupled simulation algorithm is *** simulation results are in good agreement with the field data of an actual crude oil pipeline *** addition,based on the numerical simulation,thermo-hydraulic characteristics of pipeline system are investigated,and some new thermo-hydraulic characteristics are *** the batch transportation process with constant flowrate,the change trends of temperature at the outlet of each pipeline segment are hysteretic and the change ranges of temperature become small along *** the adjustment of devices influences thermohydraulic characteristics to some *** the batch transportation process with variable flowrate,the complex thermo-hydraulic characteristics are exhibited,which are induced by the comprehensive influence of the changes of oil type,flowrate and absorbed/released *** with the transportation process with constant flowrate,the high-viscosity oil exhibits similar minimum temperature and lower maximum pressure in the transportation process with variable flowrate,which means that the higher transportation safety of pipeline system is *** study can provide a scientific reference for making the safer batch transportation scheme of crude oil pipeline system.

关键词： crude oil pipeline system batch transportation coupled simulation variable flowrate thermo-hydraulic characteristics

来源：评论

学校读者我要写书评

暂无评论

Angle Scattering Method for Soot Concentration Measurement under Ultra-Low Emissions Condition

引用

Energy Engineering 2022年第2期119卷 511-522页

作者： Bin Yang Xingchen Zhu Jie Deng Xiaoxu Guo Jinke Han Xiaowei Liu School of Energy and Power Engineering Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power EngineeringUniversity of Shanghai for Science and TechnologyShanghai200093China State Key Laboratory of Coal Combustion Huazhong University of Science and TechnologyWuhan430074China

Aiming at the problem of soot concentration measurement under ultra-low emission conditions,a forward small angle soot concentration measurement method is *** a typical boiler emission of 0.1μm-3.0μm bimodal distribution soot as an object,the particle scatter simulation calculation under different parameters is carried out,and the influence of detection angle and particle size on the angular scatteringmeasurement of ultra-low emission soot is *** influence of detection angle and particle size on the angular scatteringmeasurement of ultra-lowemission soot is ***,thewavelength of incident light is 650 nm,and the forward detection angle parameter is 15◦for the design of forward small angle soot concentration measurement *** experimental system for measuring soot with standard concentration is *** of particle concentration measurement of 1.0μm and 3.0μm under ultra-low emission conditions are carried *** results show that the average deviation of soot concentration measurement is less than 0.10 mg/m3 under the condition of ultra-low emission by using 15◦of forward detection,which provides an effective way for monitoring ultra-low emission soot concentration in coal-fired power plants.

关键词： Emission monitoring ultra-low emission soot concentration angular scattering

来源：评论

学校读者我要写书评

暂无评论

Sustainability Assessment of Typical Energy Storage Technologies for Peak Shaving Scenarios Based on the Full Life Cycle 36

Sustainability Assessment of Typical Energy Storage Technolo...

引用

36th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2023

作者： Chen, Nana Han, Xiaoqu Li, Yanxin Huang, Xiaofan Li, Jiarui Yan, Junjie State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an China Huadian Electric Power Research Institute Co. Ltd. Beijing China

ISBN: (纸本)9781713874928

With more renewable energy sources (RES) which are inherent intermittent and unpredictable connecting with power grid, various stability problems occur, among which the peak load regulation is the most prominent. Energy storage systems (ESSs) are essential for buffering the electricity grid. Selecting the most suitable energy storage technology among various alternatives is of great importance. In this work, the sustainability of typical energy storage technologies was studied with respect to four aspects for peak shaving scenarios, including technical (i.e. maturity, energy density, round-trip efficiency, duration ranges, life cycles, lifetime and position flexibility), economic (levelized cost of energy, net present value), environmental (i.e. global warming, damage to human health, damage to ecosystems, damage to resource availability) and social (public acceptance) based on the full life cycle. This study evaluated the soft criteria including maturity, position flexibility and public acceptance by Analytic hierarchy process (AHP). Life cycle assessment (LCA) and life cycle cost (LCC) methods were combined to study the life-cycle environmental and economic performance. Technique for order preference by similarity to an ideal solution (TOPSIS) was applied for determining the sustainability prioritization of energy storage technologies. The sensitivity analysis was carried out to investigate the effects of control and economic input parameters on environmental performance and economic performance. In addition, the effects of criteria weights, electricity sources and number of daily cycles were conducted on sustainability ranking of ESSs. The results showed Lithium iron phosphate battery (LIPB) and pumped hydro storage (PHS) had good sustainability performance, which could be the most suitable energy storage technologies for peak shaving scenarios. © (2023) by ECOS 2023 All rights reserved.

关键词： Life cycle

来源：评论

学校读者我要写书评

暂无评论

Thermal mechanical response analysis of the first wall in laser initial confinement fusion reactors

International Journal of Advanced Nuclear Reactor Design and...

引用

International Journal of Advanced Nuclear Reactor Design and Technology 2025年第2期7卷 147-155页

作者： Xinze Li Bingqian Zhang Chengcheng Tong Ronghua Chen Dalin Zhang Wenxi Tian Suizheng Qiu State Key Laboratory of Multiphase Flow in Power Engineering Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology School of Nuclear Science and Technology Xi'an Jiaotong University Xi'an 710049 China

This paper investigates the thermo-mechanical response characteristics of the first wall of a laser initial confinement fusion reactor under periodic transient heat flux loads. The first wall of the reactor experiences extremely high instantaneous heat loads during the target compression process, leading to temperature and thermal stress oscillations, which can cause material fatigue damage. Finite element analysis is employed to model the first wall under various chamber sizes and target energies, and the thermal-mechanical response characteristics of W, W/Cu functional gradient materials, and blanket materials are studied under thermal shock and cyclic loading conditions. The results indicate that W/Cu functional gradient materials can effectively alleviate thermal stresses on the first wall, especially in addressing the stress concentration at the interface. Fatigue life of the first wall is assessed using the Basquin model, and it is found that increasing the chamber size and increasing the target frequency can significantly reduce temperature oscillations and thermal stresses, thus extending the service life of the first wall. This study provides valuable design references for the optimization and design of the first wall in laser initial confinement fusion reactor.

关键词： Laser inertial confinement fusion reactor First wall Heat oscillation Thermal fatigue

来源：评论

学校读者我要写书评

暂无评论

Thermodynamic performance optimization of two-stage hydraulic-driven piston hydrogen compressors based on variable speed control method

引用

International Journal of Hydrogen Energy 2025年 145卷 205-214页

作者： Qiang Qi Shengdong Ren Chengqian Wang Ziying Chen Xiaohan Jia Xueyuan Peng School of Energy and Power Engineering Xi'an Jiaotong University China State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University China

The two-stage hydraulic driven piston compressor is increasingly used in 70 MPa hydrogen refueling stations. Due to variable suction pressures as hydrogen is drawn from trailer into the compressor, unbalanced distribution of pressure ratios, and hereby power consumption and discharge temperatures may occur between two stages, consequently resulting in excessively large power and high discharge temperature for a single stage. This paper proposes a scheme of equalizing pressure ratios of the two stages at any varied suction pressures by regulating the oil supply rate of the hydraulic cylinder of each stage separately. Thermodynamic simulations at varied suction pressures were conducted for the compressor with constant speed and variable speed, respectively, and a test rig was built up to validate the simulated results. The results indicate that almost identical pressure ratios between two stages were achieved by regulating the speed of each stage. As a result, the difference in power between the two stages was reduced from 35.8 kW to 11.9 kW, while the temperature deviation between the two stages was decreased from 200.8 K to 5.6 K. Furthermore, the highest discharge temperature of the two stages compressors dropped from 603.9 K to 501.1 K.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Numerical study of specific C-shaped heat exchanger using porous medium and coarse mesh coupling method

引用

International Journal of Thermal Sciences 2025年 210卷

作者： He, Shaopeng Wang, Shiqi Wang, Mingjun Tian, W.X. Qiu, S.Z. Su, G.H. State Key Laboratory of Multiphase Flow in Power Engineering School of Nuclear Science and Technology Xi'an Jiaotong University Xi'an710049 China

Porous medium method is an effective simplified approach for the heat exchanger simulation when the numerous tubes and complex structures bring unacceptable computational resources to full-scale simulation. However, for the specific C-shaped heat exchanger, the tube side resistance and flow distribution characteristics that significantly affects the heat transfer and natural circulation performance cannot be obtained by the traditional porous medium method coupled with the one-dimensional node model for tube side. It is urgent to develop a new coupling method that can not only simplify modeling and calculation, but also obtain tube side high-resolution flow heat transfer characteristics. This study presents a novel calculation method which couples the porous medium mesh and the tube side coarse mesh. The coupling method was then applied to a typical C-shaped passive residual heat removal heat exchanger (PRHR HX), which is significant to the stable operation and the mitigation of accident conditions in the nuclear power plant. The coupling calculation method was validated against the full-scaled simulation and data from scaled-down experiment. The average relative error of heat transfer power is 2.1 % under steady state conditions. Under transient conditions, the average absolute error of the fluid temperature and wall temperature are less than 6 K. Then the 3D thermal-hydraulic characteristics of PRHR HX was studied. Owing to a greater gravitational pressure head, the mass flow rates in the extended tubes surpass those in the shorter tubes by a relative deviation of 27.4 %. The upper horizontal tube's heat exchange capacity constitutes approximately 70 % of the total power, leading to enhanced natural circulation. The outlet temperatures from various tubes tend to equalize. The boiling area gradually extended down along the heat transfer tubes. Our work would present an innovative calculation method to the numerical study and design optimization of the C-shaped heat

关键词： Nuclear power plants

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：