检索结果-内蒙古大学图书馆

Revised Control Strategy for Coal-Fired Power Plants During Transient Processes Considering Heat Transfer Deterioration of Cooling Wall: Flexibility Enhancement and Security Operation

学校读者我要写书评

暂无评论

SSRN 2024年

作者： Wang, Dengliang Zhao, Yongliang Gao, Wei Chen, Weixiong Wang, Chaoyang Yan, Junjie State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an710049 China

Increasing share of power generation from intermittent renewable energy has resulted in an expanding demand for deep peaking and operational flexibility of thermal power plants. Under this circumstance, it causes an enormous threat to the safe operation of the boiler, especially cooling wall. So it is crucial to focus on the thermo-hydraulic performance of the cooling wall during transient processes. In this paper, a 1100 MW ultra-supercritical thermal power plant is used as the research object. A one-dimensional dynamic model of the cooling wall is constructed based on the conservation of mass, conservation of momentum, conservation of energy, state, metal heat storage and heat transfer equations. The temperature distributions of working fluid, inner and outer wall along the height direction of the cooling wall are obtained. Dry-out phenomenon of the cooling wall during the load cycling process is observed. It is found that heat transfer deterioration is a key reason for metal wall temperature intermittent fluctuation. When the load cycling rates are 2.5% Pe/min and 3.0% Pe/min, the maximum temperatures of metal tube wall during the loading up process reach 527.9°C and 557.3°C, respectively. Furthermore, a revised control strategy is proposed based on the heat transfer deterioration characteristics of the cooling wall. During the loading up process, the highest wall temperature is significantly reduced from 557.3°C to 502.2°C at 3.0% Pe/min. The maximum power ramp rate is increased from 2.5% Pe/min to 3.0% Pe/min when the revised control strategy is adopted. © 2024, The Authors. All rights reserved.

关键词： Fossil fuel power plants

Thermodynamic Modeling and Analysis of the Hydrogen and Combustible Gas Production in Supercritical Water Partial Oxidation System of Coal

学校读者我要写书评

暂无评论

SSRN 2024年

作者： Li, Yifeng Xing, Guowei Liu, Shi Guo, Shenghui Ge, Zhiwei Guo, Liejin State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an710049 China

Supercritical water partial oxidation (SCWPO) is an eco-friendly coal treatment technology that lowers the temperature needed for complete gasification of coal, promotes hydrogen output, enables targeted regulation of gaseous product composition, and eliminates gaseous pollutants. Current researches mainly focus on experiments and numerical simulations, with limited exploration in thermodynamics. he present study establishes an auto-thermal SCWPO cogeneration system for Hongliulin coal, employs sensitivity analysis to refine system parameters, and utilizes Life Cycle Assessment to evaluate environmental impact of hydrogen production system. As the outlet temperature of the reactor increases and the preheating water flow and equivalence ratio (ER) increase, the fraction of hydrogen in the gas product rises;conversely, the fraction of the combustible gas (CH4+CO+H2) rises. The SCWPO system can be precisely tailored to yield high-purity hydrogen or combustible gas by modulating the amount of oxygen input. The system of combustible gas production is capable of generating 241.67 GJ·h-1 of energy and attaining a cold gas efficiency of 81.62% when the ER is 0.25. The hydrogen production system can produce 1004.38 kg·h-1 of hydrogen and 206 t·h-1 of heated water at 0.5 MPa and 150℃ for an ER of 0.6. The optimum hydrogen production system achieved an energy efficiency of 90.97%, showing an improvement of 11.12% to 46.76% compared to previous hydrogen production systems. The standard Global Warming Potential of the system through carbon capture technology is 0.0087. The system developed in this paper benefits the industrial application of SCWPO and the optimization of subsequent processes. © 2024, The Authors. All rights reserved.

关键词： Thermolysis

Thermodynamic Analysis of a Supercritical Water Partial Oxidation Autothermal Cogeneration System of Coal

学校读者我要写书评

暂无评论

SSRN 2024年

作者： Xing, Guowei Li, Yifeng Ren, Changyifan Ge, Zhiwei Guo, Liejin State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an710049 China

Supercritical water partial oxidation (SCWPO) is a very efficient technology for the environmentally sound treatment of resources. Currently, there are few thermodynamic studies of SCWPO cogeneration system. In this study, a new supercritical water partial oxidation autothermal cogeneration system of coal is proposed. The system was evaluated for energy and exergy under typical operating conditions. The efficiencies achieved were 86% for energy and 47.6% for exergy. Due to the mixed working fluid is a mixture of H2O and CO2, the CO2 is very easy to capture. The exergy analysis revealed that the most significant exergy loss within the system occurred in the SCWPO reactor, which accounted for 78.2%% of the total exergy loss. Further sensitivity analysis of the system indicates that optimum values identified for both back pressure and carbon capture and storage unit (CCS) first stage pressure (PV-pump1), which are 8.5 kPa and 0.03 MPa. Additionally, increasing both the flow rate and temperature of preheated water can significantly enhance system efficiency. An increase in the flow rate of preheated water can lead to a reduction of the maximum system temperature;however, an elevation in the temperature of preheated water may cause a significant rise of the maximum system temperature, which is not conducive to the stable operation of the system. Finally, this paper compares the proposed system with the systems that have been reported in the literature. The results show that the system represents an innovative cogeneration solution with considerable advantages. © 2024, The Authors. All rights reserved.

关键词： Exergy

Heat Transfer Enhancement of Air flow Through New Types of Perforated Dimple/Protrusion Fins

学校读者我要写书评

暂无评论

SSRN 2024年

作者： Sen, Palash Chen, Mengjie Bai, Bofeng State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an710049 China

Heat transfer enhancement technologies of air flow are of critical to energy conservation and emission reduction in industrial applications. This paper explores the numerical simulation analysis of 18 kinds of perforated dimple/protrusion fins. The wind speed varies within the range of 2~6m/s, and the investigation delves into the impact of different structural parameters on strengthening factor Nu/Nu0, resistance factor f/f0 and other comprehensive evaluation factor performance evaluation criteria (PEC) of perforated dimple/protrusion fins. The study specifically explores the influence of structural parameters, including intercepting perforated dimple/protrusion height (S0), aperture (D), hole structure offset (a), and the arrangement of perforated dimple/protrusion structure, on heat transfer performance. The overall heat transfer performance of the perforated dimple/protrusion fins rises with height under the same operating conditions. It first increases and then declines with the increasing aperture, and first drops and then increases with the increasing offset. The hole structure offset is better on the inflowing leeward side than on the inflowing side. The fins with both perforated dimple and perforated protrusion structures have advantages over the one with either of two structures, and the alignment arrangements are identified as the optimal configuration. © 2024, The Authors. All rights reserved.

关键词： Air

Calcium Looping Sorption-Enhanced Electrified Steam Methane Reforming for Efficient Hydrogen Production with Short- and Long-Duration Cooperative Energy Storage

学校读者我要写书评

暂无评论

SSRN 2024年

作者： Song, Huchao Zhang, Xinyue Lin, Xiaolong Bian, Hao Liu, Yinhe State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an710049 China

Currently, the dominant hydrogen production technology is steam methane reforming, but both the reforming reaction and the combustion for driving the reaction produce significant CO2 emissions. Sorption-enhanced methane reforming enables the in-situ removal of CO2 produced by the reforming reaction and promotes higher hydrogen yields, however, CO2 emissions from combustion cannot be avoided. Renewable electricity instead of combustion for reaction heating can eliminate combustion carbon emissions and flue gas heat loss, but its dependence on renewable electricity supply prevents continuous and stable operation. This study proposes a sorption-enhanced electrified steam methane reforming technology based on short- and long-duration cooperative energy storage and calcium looping carbon capture. This technology utilizes the CO2 adsorption and energy storage property of the absorbent to absorb CO2 in situ in the reformer and transform renewable electricity to chemical and thermal energy in the regenerator as short- duration energy storage. The energy stored in the absorbent can be used to drive the methane reforming reaction and transformed into chemical energy in hydrogen continuously as long- duration energy storage. Through First law and Second law analysis, this study has found that the novel process improves thermal efficiency by 8.5 percentage points and reduces the exergy loss of the overall process by 53.2% compared with the sorption-enhanced steam methane reforming process. Based on current fuel prices in China, the novel process is more economical than the other steam methane reforming processes simulated in this study. Sensitivity analysis has found that low electricity and high methane prices benefit the economic performance of the novel process. This study may provide a stable, efficient, and economical way of clean hydrogen energy production. © 2024, The Authors. All rights reserved.

关键词： Hydrogen production

High Concentration of CO and CO2 Inhibits Coal Gasification in Supercritical Water

学校读者我要写书评

暂无评论

SSRN 2024年

作者： Zhang, Rui Zhao, Shuaiqi Huang, Han Zhao, Kunpeng Bai, Bofeng State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an710049 China

Supercritical water gasification technology achieves efficient resource utilization of lignite and produces H2, CO and CO2. In this study, we experimentally investigated the impact of gas product generated from high concentration (>30 wt%) formic acid decomposition on the gasification of Tiebei lignite in the supercritical water. H2 promotes the pyrolysis of carbon structures, the increase in CO promotes CO2 generation through the water-gas shift reactions, and the enrichment of CO2 hinders gas diffusion. We found that high concentration of formic acid(H2, CO and CO2) inhibits the gasification of Tiebei lignite in the supercritical water. Compared with coal gasification in the supercritical water without formic acid, 30wt% formic acid reduces the carbon efficiency of lignite by 7.66%, and the mass conversion of coal by 3.97%. When the concentration of formic acid is 30wt% to 70wt%, the higher concentration of formic acid(H2, CO and CO2), the worse gasification performance of Tiebei lignite. © 2024, The Authors. All rights reserved.

关键词： Water gas shift

Experimental Investigation on Sodium Migration and Mineral Transformation in Ash Deposit During Gasification of Zhundong Coal Using a Drop Tube Furnace 9th

学校读者我要写书评

暂无评论

Experimental Investigation on Sodium Migration and Mineral T...

9th International Symposium on Coal Combustion, ISCC 2019

作者： Liu, Chengchang Wang, Chang’an Wang, Chaowei Du, Yongbo Tang, Guantao Li, Guangyu Che, Defu State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power Engineering Xi’an Jiaotong University Xi’an710049 China

ISBN: (纸本)9789811616563

Zhundong coal has attracted an ever-increasing concern due to its super-huge reserve but high content of alkali metals. Volatilized into the gaseous phase during the gasification process, alkali metals are extremely unfavorable for coal utilization. Gasification technology can promote the large-scale utilization of high-alkali coal. However, few efforts, if any, have been conducted on gasification of Zhundong coal. The present study aimed to elucidate the sodium migration and mineral transformation characteristics in coal ash deposition process under different gasification conditions, while the behavior of sodium migration and mineral transformation were further analyzed using Inductively Coupled Plasma-Atomic Emission Spectrometer (ICP-OES), X-ray diffraction (XRD) and X-ray fluorescence (XRF) techniques. In this paper, the sodium migration characteristics in gasification process under different conditions were investigated by adding three sodium salts (NaCl, Na2CO3 and Na2SO4), kaolin and diatomite into coal, respectively. The effects of ash deposition time on sodium migration and mineral transformation characteristics in ash were also explored. The experimental results showed that the addition of sodium salt could increase the sodium content in the ash to a large extent. Kaolin and diatomite could solidify alkali metals in the gaseous phase during gasification process. As the ash accumulation time increased, the minerals such as chlorine, sulphur, and iron in the gaseous phase were easily bonded to the surface of the ash and reacted to form other crystal phases. The present study can provide guidance for the utilization of Zhundong coal and benefit the development of clean coal technology. © 2022, Tsinghua University Press.

关键词： Coal

Numerical Simulation on Combustion Characteristics of Co-Firing Biomass Syngas and Coal in a 660 MW Utility Tower Boiler 9th

学校读者我要写书评

暂无评论

Numerical Simulation on Combustion Characteristics of Co-Fir...

9th International Symposium on Coal Combustion, ISCC 2019

作者： Ma, Shihao Zhang, Yan Zhu, Zhengrong Deng, Lei Che, Defu State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power Engineering Xi’an Jiaotong University Xi’an710049 China

ISBN: (纸本)9789811616563

Utilize the biomass energy and adopt carbon capture and storage technologies could reduce the CO2 emission effectively. Biomass gasification is an effective ways to use the biomass. Co-firing biomass syngas with pulverized coal under oxy-fuel condition in utility boiler can combine the two advantages to reduce the CO2 emission. In this paper, a new proposed combustion mechanism was used to investigate the combustion characteristics of co-firing different types biomass syngas and coal in a 660 MW double reheat tower boiler. The influence of syngas composition and oxy-fuel condition on temperature distributions and flue gas components was analyzed when total input heat of the boiler was steady. The results show that the temperature and the emission of the NO and CO2 decrease in co-firing conditions, the NO mass concentration reduced up to 10.2% in co-firing cases. Biomass syngas with higher H2 and less CO and CH4 composition contributes to lower CO2 emission and higher boiler temperature, which can improve plant performance. The oxy-fuel condition also affects the combustion characteristics to some extent. With the increase of O2 volume fraction, the temperature increases and the O2 consumption decreases. Moreover, the NO mass concentration increases in oxy-fuel combustion when co-firing biomass syngas and coal with a mixing ratio of 0.1. This study offers reference for boiler’s operation and design optimization for biomass syngas co-firing. © 2022, Tsinghua University Press.

关键词： Coal

Flocculation of suspended cohesive particles in Rayleigh-Bénard turbulence

学校读者我要写书评

暂无评论

Physical Review Fluids 2025年第2期10卷 024305-024305页

作者： Han Huang Shuaiqi Zhao Rui Zhang Binbin Pei Kunpeng Zhao Bofeng Bai State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an 710049 China Key Laboratory of Mechanics on Disaster and Environment in Western China The Ministry of Education of China Lanzhou University Lanzhou 730000 China

We employ a four-way coupled numerical approach to investigate the dynamics of suspended cohesive particles in Rayleigh-Bénard turbulence. The Stokes drag, cohesive, and direct contact forces between primary particles are captured in detail, yielding the phenomena of flocs' aggregation, breakage, and deformation. The momentum and thermal exchange between primary particles and the fluid are considered based on the Source-in-Cell method. We found that the initial increase of the average floc size indicates a temporary flocculation phase, which is followed by an equilibrium phase where the average floc size becomes stable, reflecting the balance between aggregation and breakage. Different from the traditional perspective, which attributed the local accumulation of particles to their gravity, we found that the suspended particles still tend to accumulate in the bottom hot boundary layer region. This accumulation is primarily driven by the temperature-induced variation in aggregation strength and the nonuniform spatial distribution of floc inertia. Additionally, the stronger cohesion yields a reduction in momentum intensity of the thermal plumes, primarily due to the more pronounced weakening of fluid momentum by the larger flocs.

关键词： Momentum