检索结果-内蒙古大学图书馆

Experimental Study on Deliquification with Atomizing Nozzle in Gas Well

学校读者我要写书评

暂无评论

Experimental Study on Deliquification with Atomizing Nozzle ...

2020 International Conference on Green Energy, Environment and Sustainable Development, GEESD 2020

作者： Gao, Yutang Li, Xiaobai Chang, Peng Liu, Lei State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Shaanxi710049 China

Gas is a clean energy resource in comparison with oil and coal. Liquid-loading problem is frequently encountered in the process of gas production. It would directly cause the production of gas wells decreasing, even off production. A number of deliquification techniques have been suggested for solving this kind of problem, but the available techniques are not yet widely applicable. Based on the analysis, the method of deliquification with atomizing nozzle in gas wells was put forward. The test bench was designed for studying the atomization of nozzles and the liquid entrainment of gas flow. The size distribution of atomized droplets was measured by Malvern laser grain size analyzer. The Sauter mean diameters of atomized droplets were analysed under different two-phase flow conditions. The results indicate that the designed nozzles have good atomization performances and show potential application for reducing liquid loading in gas wells. © Published under licence by IOP Publishing Ltd.

关键词： Two phase flow

Experimental study on flow characteristics of rectangular narrow channel

学校读者我要写书评

暂无评论

International Journal of Advanced Nuclear Reactor Design and Technology 2020年 2卷 60-68页

作者： Song, Gongle Sun, Rulei Zhang, Dalin Su, G.H. Tian, Wenxi Qiu, Suizheng School of Nuclear Science and Technology Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China

Plate fuel elements is gradually used in advanced reactor structure design because of its advantages of high fuel consumption and high safety. The flow channel of the plate fuel element is a typical rectangular narrow channel, and accurately obtaining the flow characteristics of the rectangular narrow channel has become the most basic problem in the thermal and hydraulic research of the rectangular narrow channel. The flow characteristics of a rectangular narrow channel with cross-section of 3 × 67 mm and length of 745 mm are studied experimentally. The mass flow range is 50–650 kg/h, the pressure is 0.1–1 MPa, and the range of the inlet temperature is 283.15–333.15 K. The Reynolds number obtained experimentally in the laminar-turbulent transition region is in the range of 2700–4000, which has a significant delay compared to round channels. Laminar flow is modeled theoretically, and the Fourier sine transform method is used to solve the momentum Navier-Stocks equation, and the expression of the friction coefficient is obtained through the velocity distribution. However, due to the particularity of the test section, the error of the theoretical solution is large compared with experimental data. Five empirical correlations commonly used in rectangular narrow channels are evaluated. The Leon correlation is applicable to the experimental laminar flow area, and the Blasius correlation is applicable to the turbulent flow area. In order to further reduce the error, the friction correlation applicable to this experimental condition is fitted, making the prediction of friction coefficient more accurate. For subsequent experimental research on heat transfer, flow pattern, CHF, flow instability, etc., these works are of great significance. © 2020 Xi'an Jiaotong University

关键词： Laminar flow

Morphology Construction of Molybdenum Doped Nickel Sulfide Electrocatalyst Induced by Nh4f to Promote Hydrogen Evolution Reaction

学校读者我要写书评

暂无评论

SSRN 2024年

作者： Zhang, Baikai Li, Xiaohui Liu, Maochang Huadian Electric Power Research Institute Co. Ltd. Zhejiang310030 China School of Eenergy and Power Engineering Xi’an Jiaotong University Shaanxi 710049 China State Key Laboratory of Multiphase Flow in Power Engineering China

Here, by varying the mass of NH4F throughout the hydrothermal process, Mo-doped nickel-based sulfide catalysts (Mo-NiS-Fx) with various morphologies (prisms, rods, flakes, and cones) were created. Among these, the flaky Mo-NiS-F1.2 exhibited exceptional performance towards electrochemical hydrogen evolution reaction, surpassing most similar catalysts with an overpotential of 79 mV at 10 mA cm-2 and a Tafel slope of 49.8 mV dec-1. Significantly, Mo-NiS-F1.2 maintained its high activity for hydrogen evolution over 60 h at 10 mA cm-2, making it suitable for widespread commercial application. This work demonstrates the potential of morphology manipulation to enhance catalytic activity. © 2024, The Authors. All rights reserved.

关键词： Hydrogen

Co_(2)N Nanoparticles Anchored on N-Doped Active Carbon as Catalyst for Oxygen Reduction Reaction in Zinc–Air Battery

学校读者我要写书评

暂无评论

Energy & Environmental Materials 2022年第3期5卷 935-943页

作者： Xianli Wu Guosheng Han Hao Wen Yanyan Liu Lei Han Xingyu Cui Jiajing Kou Baojun Li Jianchun Jiang Research Center of Green Catalysis College of ChemistryZhengzhou University100 Science RoadZhengzhou 450001China National Engineering Laboratory for Biomass Chemical Utilization Institute of Chemical Industry of Forest ProductsChinese Academy of ForestryNanjing 210042China College of Science Henan Agricultural UniversityZhengzhou 450002China Davidson School of Chemical Engineering Purdue University480 Stadium Mall DriveIN 47906United States State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University28 Xianning West RoadXi'an 710049China

The development of efficient catalytic electrode toward oxygen reduction reaction(ORR)is still a great challenge for the wide use of zinc–air ***,Co_(2)N nanoparticles(NPs)anchored on N-doped carbon from cattail were verified with excellent catalytic performances for *** onset and half-wave potentials over the optimal catalyst reach to 0.96 V and 0.84 V,*** retention rates of 96.8%after 22-h test and 98.8%after running 1600 s were obtained in 1 M methanol *** functional theory simulation proposes an apparently increased electronic states of Co_(2)N in N-doped carbon layer close to the Fermi *** charge density,favorable adsorption,and charge transfer of intermediates originate from the coexistence of Co_(2)N NPs and N atoms in carbon *** superior catalytic activity of composites also was confirmed in zinc–air *** novel catalytic property and controllable preparation approach of Co_(2)Ncarbon composites provide a promising avenue to fabricate metal-containing catalytically active carbon from biomass.

关键词： catalytically active carbon Co2N nanoparticles N-doping oxygen reduction reaction zinc–air battery

Chromium Promoted the Efficient and Stable Catalytic Degradation of Propane Over Pt/Hzsm-5 Catalyst: Optimization and Reaction Mechanism

学校读者我要写书评

暂无评论

SSRN 2025年

作者： Jian, Yanfei Xu, He Wang, Yao Wang, Jingjing Xia, Lianghui Liu, Yujie Yu, Yanke He, Chi State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power Engineering Xi'an Jiaotong University Shaanxi Xi'An710049 China National Engineering Laboratory for VOCs Pollution Control Material and Technology University of Chinese Academy of Sciences Beijing101408 China Yunnan University China

Light alkanes are a class of ubiquitous volatile organic compounds (VOCs), which bring great environmental hazards and health risks. However, low-temperature degradation of light alkanes is still a great challenge. Herein, a series of Pt/HZSM-5 catalysts without/with additives of Cr were fabricated. Catalytic performance of the catalyst for C3H8 low temperature combustion was investigated. It was found that Cr element had a significant effect on the activity of Pt/HZSM-5. Pt/Cr1/HZSM-5 performed the best activity for C3H8, excellent high temperature stability and water resistance. Characterization results of catalysts indicated that the introduction of Cr element could fix Pt site to promote the dispersion of Pt on the support. Moreover, the interaction between Cr and Pt produced more active Pt species, surface active lattice oxygen and acidic sites, which could promote the activation of C-H bonds in C3H8. Theoretical calculations showed that the interface between Pt and Cr had stronger adsorption for O2 and C3H8, which could accelerate propane oxidation. In this study, the effect of transition metal elements on the promotion of noble metal catalysts in the low-temperature degradation of light alkanes was discussed in depth, and it provided a reference for the design of efficient noble metal molecular sieve catalysts. © 2025, The Authors. All rights reserved.

关键词： Molecular sieves

Thermal-Mechanical Influence Aspects and Evaluation of Helical Cruciform Single Rod in Fluoride-Salt-Cooled High-Temperature Advanced Reactor

学校读者我要写书评

暂无评论

SSRN 2024年

作者： Chen, Yiwen Zhang, Dalin Jiang, Dianqiang Li, Wei Wu, Xiaoli Tian, Wenxi Qiu, Suizheng Su, Guanghui Lu, Qi State Key Laboratory of Multiphase Flow in Power Engineering Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology School of Nuclear Science and Technology Xi’an Jiaotong University Xi’an710049 China State Key Laboratory for Strength and Vibration of Mechanical Structures Xi’an Jiaotong University Xi’an710049 China Science Technology on Reactor System Design Technology Laboratory Nuclear Power Institute of China Chengdu610213 China China

Helical cruciform fuels are novel in nuclear reactors, potential to increase reactor’s power density. However, the geometry is complicated so influence of it on the fuel performance is not identified yet. In this paper, impact of power density, cross-section parameters, and twist pitch on thermal and mechanical characteristics of fuel used in Fluoride-Salt-cooled high-Temperature Advanced Reactor is discussed based on fluid-thermal-mechanical coupling. For thermal features, twist pitch is key while others have few effects. Increase in twist pitch leads to temperature uniformity and rise owing to weaker mixing effects. Fuel center temperature at middle plane of 300mm-pitch rod is 829.58℃, 54.66℃ higher than that of 100mm-pitch rod. Difference of maximum and minimum temperature at 45° cross section of 500mm-pitch rod is 153.62℃, while the figure is only 74.00℃ of 300mm-pitch rod. Besides, axial temperature of cladding outer surface increases wavelike due to complex geometry. For mechanical features, not geometry sizes but temperature affects stress distribution. Maximum Von-Mises stress appears at the elbow, where maximum temperature exists, 116.8MPa under normal conditions, lower than tensile strength of the material. After identifying the influence of these factors, five dimensionless parameters are proposed to evaluate and rate fuel performance based on Technique for Order Preference by Similarity to an Ideal Solution. As a result, an optimization comes up, scoring 0.310, twice more than the original design, owing to the thermal uniformity and mechanical safety. This study provides a reference for identifying and evaluating the performance of helical structure. © 2024, The Authors. All rights reserved.

关键词： Geometry

Experimental Study on Electrocatalytic Reduction of CO2 to Methanol over Cu2O and Cu2O/ZnO films

学校读者我要写书评

暂无评论

Experimental Study on Electrocatalytic Reduction of CO2 to M...

International Conference on Power Engineering 2021, ICOPE 2021

作者： Zhang, Wenfei Zhou, Qulan Qi, Ji Li, Na State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China China Mobile System Integration Co. Ltd Beijing100052 China

The Cu2O film electrodes were prepared by solution immersion method, the ZnO/Cu2O film electrodes were prepared by electrodeposition method. Then the pure Cu2O film electrodes and ZnO/Cu2O film electrodes were used to reduce CO2 to CH3OH. The crystal structure, morphology, particle size and specific surface area of pure Cu2O films prepared under different immersion time and ZnO/Cu2O films prepared under different deposition time and Zn2+ concentration were analyzed by XRD, SEM, and BET. The electrolytic activity of the pure Cu2O film electrodes and ZnO/Cu2O film electrodes were studied. Under the same reaction conditions, the Cu2O film electrode with 2 h preparation time has the best electrolysis effect in the three groups of pure Cu2O electrode. The increase of reaction temperature can significantly promote the reduction of CO2 to CH3OH on Cu2O film electrodes. the ZnO/Cu2O film electrode with the Zn2+ concentration of 0.05 M and the deposition time of 30 min had the highest total CH3OH yields. This study highlights that the ZnO have a very good promotion of electrolytic CO2 reduction on Cu2O film. © 2021 The Japan Society of Mechanical Engineers.

关键词： Carbon dioxide

Corrosion Effect Analysis on Thermal-Hydraulics of Lbe/Water Spiral Tube Steam Generator Under Oxygen-Controlled Environment

学校读者我要写书评

暂无评论

SSRN 2023年

作者： Lu, Dingsheng Yang, Yupeng Wang, Chenglong Zhang, Dalin Qiao, Pengrui Tian, Wenxi Qiu, Suizheng Su, Guanghui H. School of Nuclear Science and Technology Shanxi Key Laboratory of Advanced Nuclear Energy and Technology Xi'an Jiaotong University Xi'An710049 China China Institute of Atomic Energy Beijing102413 China State Key Laboratory of Multiphase Flow in Power Engineering China

In order to explore the flow and heat transfer characteristics of spiral tube steam generators under Lead-Bismuth Eutectic (LBE) corrosion, the accelerated removal effect of LBE corrosion flow was perfected, and a bidirectional coupling model of LBE corrosion and flow heat transfer was established. Computational fluid dynamics (CFD) method was used to simulate the corrosion and flow heat transfer of helical tube steam generator under saturated oxygen concentration and oxygen-controlled environment. The results indicate that the corrosion of liquid LBE forms an oxidation layer, which hinders the heat transfer in the spiral tube steam generator. This leads to a significant increase in the wall friction coefficient and a decrease in the surface Nusselt number. However, it does not have a significant effect on the water side evaporation process of the spiral tube steam generator. The implementation of an oxygen-controlled environment can effectively reduce the influence of LBE corrosion on the flow heat transfer of the spiral tube steam generator. Especially under high temperature conditions, it can reduce the near wall temperature of LBE change by up to 57.5% and the outlet temperature change by up to 61.5%. The oxygen-controlled environment results in prolonged local hypoxia time, with a more pronounced effect at higher temperatures. © 2023, The Authors. All rights reserved.

关键词： Oxygen

Analysis of Different Control Strategies Considering Individual Regulation of Heat User

学校读者我要写书评

暂无评论

Analysis of Different Control Strategies Considering Individ...

Electrical Engineering and Mechatronics Technology (ICEEMT), IEEE International Conference on

作者： Zhiwei Xun Huijie Wang Liyuan Wang Long Yang Yunfang Gao Ming Liu Guoneng Jinjie Energy Co. Ltd Yulin China Xi’an Jiaotong University Xi’an China State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an China

In the process of outdoor temperature change, it is beneficial to improve the comfort of thermal users to formulate adjustment and control strategies according to the actual needs of each user. In this paper, different adjustment modes are established according to the thermal comfort of users, and the control strategies of rising and cooling within 0, 30 and 60 minutes are proposed, and the indoor temperature control effect and heating energy consumption of each adjustment mode under different control strategies are analyzed. The results show that: in different modes, when the rise and cooling time increase, compared with the design room temperature, the indoor temperature difference under the control mode is smaller, but the time needed to reach stability is longer. At the same time, the total heat load is unchanged, but the total pump work decreases.

关键词：