检索结果-内蒙古大学图书馆

Morphology Structure Evolution and Combustion Reactivity of Bituminous Char at Around Ash Melting Temperature

Journal of Thermal Science 2022年第6期31卷 2189-2202页

作者： ZHANG Yandi YANG Huan WANG Bo HMShahzaib KHAN DUAN Xiaoli LIU Yinhe State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi'an Jiaotong UniversityXi'an 710049China

In slag tapping furnaces, char particles undergo a series of complex structural evolution before and after being captured by the liquid slag layer. The evolution results affect the carbon conversion rate and are affected by temperature fluctuations, especially in the ash melting temperature zone. Experimental study on structure evolution of bituminous char prepared at around ash melting temperature was carried out on a fixed bed. The morphology, specific surface area and mineral chemical composition were measured at different temperatures. Experimental results show that the number density and the size of ash droplets exuded on the char surface increased significantly with the increasing temperature. The ash specific surface area from gasification was slightly greater than that from combustion. The residual content of chloride in the char become 1% and the contents of Fe, K, Mg and Na decrease significantly during the pyrolysis process across the ash melting temperature zone. The diffraction intensity of oldhamite increase which indicates the reaction of carbon substrate with minerals during the evolution;the diffraction intensity of quartz dramatically decreases for the reason of anorthite generation. The ignition and burnout temperatures of char were found to increase and the combustion stability decreased with the increasing pyrolysis temperature.

关键词： coal char structure evolution carbothermal reaction combustion

来源：评论

学校读者我要写书评

暂无评论

Formic acid dehydrogenation reaction on high-performance Pd_(x)Au_(1−x) alloy nanoparticles prepared by the eco-friendly slow synthesis methodology

引用

Frontiers in Energy 2023年第6期17卷 751-762页

作者： Yibo GAO Erjiang HU Bo HUANG Zuohua HUANG State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049China Institute of Chemical Engineering and Technology Xi’an Jiaotong UniversityXi’an 712000China

Dehydrogenation of formic acid (FA) is considered to be an effective solution for efficient storage and transport of hydrogen. For decades, highly effective catalysts for this purpose have been widely investigated, but numerous challenges remain. Herein, the Pd_(x)Au_(1−x) (x = 0, 0.2, 0.4, 0.5, 0.6, 0.8, 1) alloys over the whole composition range were successfully prepared and used to catalyze FA hydrogen production efficiently near room temperature. Small PdAu nanoparticles (5–10 nm) were well-dispersed and supported on the activated carbon to form PdAu solid solution alloys via the eco-friendly slow synthesis methodology. The physicochemical properties of the PdAu alloys were comprehensively studied by utilizing various measurement methods, such as X-ray diffraction (XRD), N2 adsorption–desorption, high angle annular dark field-scanning transmission electron microscope (HAADF-STEM), X-ray photoelectrons spectroscopy (XPS). Notably, owing to the strong metal-support interaction (SMSI) and electron transfer between active metal Au and Pd, the Pd0.5Au0.5 obtained exhibits a turnover frequency (TOF) value of up to 1648 h−1 (313 K, nPd+Au/nFA = 0.01, nHCOOH/nHCOONa = 1:3) with a high activity, selectivity, and reusability in the FA dehydrogenation.

关键词： FA dehydrogenation face-centred cubic structures PdAu solid solution alloy nanoparticles slow synthesis methodology SMSI effect

来源：评论

学校读者我要写书评

暂无评论

Function-reversible facets enabling SrTiO_(3)nanocrystals for improved photocatalytic hydrogen evolution

引用

Frontiers in Energy 2024年第1期18卷 101-109页

作者： Bin WANG Bei AN Xiaoqian LI Shaohua SHEN School of Physics Key Laboratory for Non-equilibrium Synthesis and Modulation of Condensed Matter(Ministry of Education)Key Laboratory of Shaanxi for Advanced Materials and Mesoscopic PhysicsXi’an Jiaotong UniversityXi’an 710049China International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power EngineeringXi’an Jiaotong UniversityXi’an 710049China

It has been widely reported that,for faceted nanocrystals,the two adjacent facets with different band levels contribute to promoted charge separation,and provide active sites for photocatalytic reduction and oxidation reaction,*** such cases,only one family of facets can be used for photocatalytic hydrogen ***,by using SrTiO_(3)nanocrystals enclosed by{023}and{001}facets as a model photocatalyst,this paper proposed a strategy to achieve the full-facets-utilization of the nanocrystals for photocatalytic hydrogen via chemically depositing Pt nanoparticles on all *** photo-deposition experiment of CdS provided direct evidence to demonstrate that the{023}facets which were responsible for photooxidation reaction can be function-reversed for photocatalytic hydrogen evolution after depositing Pt nanoparticles,together with the{001}***,the full-facets-utilization led to a much-improved activity for photocatalytic hydrogen,in contrast to those SrTiO_(3)nanocrystals with only{001}facets deposited by Pt nanoparticles via a photo-deposition method.

关键词： SrTiO_(3)nanocrystals crystal facets photocatalysis hydrogen evolution

来源：评论

学校读者我要写书评

暂无评论

Evaluation of frictional pressure drop correlations for air-water and air-oil two-phase flow in pipeline-riser system

引用

Petroleum Science 2024年第2期21卷 1305-1319页

作者： Nai-Liang Li Bin Chen School of Low-carbon Energy and Power Engineering China University of Mining and TechnologyXuzhou221116JiangsuChina State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an710049ShaanxiChina

Accurate prediction of the frictional pressure drop is important for the design and operation of subsea oil and gas transporting system considering the length of the pipeline. The applicability of the correlations to pipeline-riser flow needs evaluation since the flow condition in pipeline-riser is quite different from the original data where they were derived from. In the present study, a comprehensive evaluation of 24prevailing correlation in predicting frictional pressure drop is carried out based on experimentally measured data of air-water and air-oil two-phase flows in pipeline-riser. Experiments are performed in a system having different configuration of pipeline-riser with the inclination of the downcomer varied from-2°to-5°to investigated the effect of the elbow on the frictional pressure drop in the riser. The inlet gas velocity ranges from 0.03 to 6.2 m/s, and liquid velocity varies from 0.02 to 1.3 m/s. A total of885 experimental data points including 782 on air-water flows and 103 on air-oil flows are obtained and used to access the prediction ability of the correlations. Comparison of the predicted results with the measured data indicate that a majority of the investigated correlations under-predict the pressure drop on severe slugging. The result of this study highlights the requirement of new method considering the effect of pipe layout on the frictional pressure drop.

关键词： Frictional pressure drop Pipeline-riser Gas-liquid two-phase flow Severe slugging Correlation

来源：评论

学校读者我要写书评

暂无评论

Effect of Particle Orientation on Heat Transfer in Arrays of Prolate Particles

引用

Computer Modeling in Engineering & Sciences 2023年第8期136卷 1509-1526页

作者： Romana Basit Xinyang Li Zheqing Huang Qiang Zhou School of Chemical Engineering and Technology Xi’an Jiaotong UniversityXi’anChina State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’anChina

Direct Numerical Simulations have been carried out to study the forced convection heat transfer of flow through fixed prolate particles for a variety of aspect ratios ar={5/4,5/3,5/1}with Reynolds number(Re)up to *** variations of the solid volume fraction c={0.1,0.2,0.3}with four Hermans orientation factors S={−0.5,0,0.5,1}are *** has been found that changes in S cause prominent variations in the Nusselt *** general,Nusselt number increases with the decrease of *** all three aspect ratios,the Nusselt number remains a linear function of S at different c and ***,it is concluded that,for heat transfer from prolate muti-particle system,the effects of orientations cannot be ignored.A new correlation for Nusselt number has been developed for arrays of prolate particles using the simulation data as a function of Re,c,S and ar.

关键词： Direct Numerical Simulation heat transfer lattice Boltzmann method particle orientations prolate particles

来源：评论

学校读者我要写书评

暂无评论

Particle convective heat transfer near the wall in a supercritical water fluidized bed by single particle model coupled with CFD-DEM

引用

Particuology 2023年第2期73卷 47-58页

作者： Tianning Zhang Zhen Wan Youjun Lu State Key Laboratory of Multiphase Flow in Power Engineering(SKLMFPE) Xi'an Jiaotong UniversityXi'an710049ShaanxiChina Xi'an Electronic Engineering Research Institute Xi'an710100ShaanxiChina

Supercritical water fluidized bed(SCWFB)is a promising reactor to gasify biomass or *** optimization design is closely related to wall-to-bed heat transfer,where particle convective heat transfer plays an important *** paper evaluates the particle convective heat transfer coefficient(h_(pc))at the wall in SCWFB using the single particle *** critical parameters in the single particle model which is difficult to get experimentally are obtained by the computational fluid dynamics-discrete element method(CFD-DEM).The contact statistics related to particle-to-wall heat transfer,such as contact number and contact distance,are also *** results show that particle residence time(τ),as the key parameter to evaluate h_(pc),is found to decrease with rising velocity,while increase with larger thermal boundary layer thickness.τfollows a gamma function initially adopted in the gas-solid fluidized bed,making it possible to evaluate h_(pc) in SCWFB by a simplified single particle *** theoretical predicted h_(pc) tends to increase with rising thermal gradient thickness at a lower velocity(1.5 U_(mf)),while first decreases and then increases at higher velocity(1.75 and 2 U_(mf)).h_(pc) occupies 30%-57%of the overall wall-to-bed heat transfer coefficient for a particle diameter of 0.25 *** results are helpful to predict the overall wall-to-bed heat transfer coefficient in SCWFB combined with a reasonable fluid convective heat transfer model from a theoretical perspective.

关键词： Supercritical water Fluidized bed Particle residence time Discrete element method Single particle model

来源：评论

学校读者我要写书评

暂无评论

Numerical prediction of spatio-temporal frosting patterns of curved surface considering varying working parameters

引用

Energy Storage and Saving 2023年第1期2卷 348-358页

作者： Xue Liu Xiaojun Dong Shaohang Yan Yu Hou Tianwei Lai State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an710049China

Accurate numerical prediction of frosting patterns is essential for the efficient layout and timing defrosting of heat exchangers under frosting *** this study,a numerical model is developed to predict the spatio-temporal frosting habits on curved surfaces in combination with the correlations of frost density and thermal *** the model,frost melting is *** verification,the frosting and heat transfer characteristics along the flow path are investigated under various structural and operating *** thickness along the path is mainly affected by the cooling surface temperature,while the heat and mass transfer rates are strongly correlated with the humidity *** proportions of latent heat and sensible heat are distributed more unevenly in parallel flow case than in counter flow *** deposition is facilitated by a smaller radius of curvature of the cooling *** uniform frosting characteristics along the path and smaller heat transfer obstruction are presented with a smaller length-to-height ratio of the flow path.

关键词： Frosting Numerical prediction Heat transfer Curved surface Varying parameter

来源：评论

学校读者我要写书评

暂无评论

Alloy nanocrystals:Synthesis paradigms and implications

引用

Chinese Journal of Structural Chemistry 2023年第11期42卷 1-5页

作者： Zhaojun Liu Zerui Mu Chuanbo Gao State Key Laboratory of Multiphase Flow in Power Engineering Frontier Institute of Science and TechnologyXi'an Jiaotong UniversityXi'an710054China

*** Noble metal nanocrystals serve as exceptional catalysts across a wide spectrum of industrial processes[1].Moreover,there exists a substantial demand for noble metal catalysts in emerging clean-energy applications,such as water-splitting hydrogen production and fuel *** non-noble transition metals or main-group metals into noble metal nanocrystals can reduce the weight of noble metals in the catalysts,thus remarkably lowering the ***,alloy nanocrystals offer intriguing catalytic properties that surpass those of their monometallic counterparts,thanks to the charge transfer between the constituent components and the expansion or shrinkage of the lattice size[2].

关键词： alloy metals noble

来源：评论

学校读者我要写书评

暂无评论

MIXED DISCONTINUOUS GALERKIN METHOD FOR QUASI-NEWTONIAN STOKES flowS

引用

Journal of Computational Mathematics 2024年第3期42卷 885-910页

作者： Yanxia Qian Fei Wang Wenjing Yan School of Mathematics and Statistics Xi'an Jiaotong UniversityXi'an 710049China School of Mathematics and Statistics&State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong UniversityXi'an 710049China

In this paper,we introduce and analyze an augmented mixed discontinuous Galerkin(MDG)method for a class of quasi-Newtonian Stokes *** the mixed formulation,the unknowns are strain rate,stress and velocity,which are approximated by a discontinuous piecewise polynomial triplet ■for k≥***,the discontinuous piecewise polynomial function spaces for the field of strain rate and the stress field are designed to be *** addition,the pressure is easily recovered through simple *** the benefit of the analysis,we enrich the MDG scheme with the constitutive equation relating the stress and the strain rate,so that the well-posedness of the augmented formulation is obtained by a nonlinear functional *** k≥0,we get the optimal convergence order for the stress in broken ■(div)-norm and velocity in L^(2)-***,the error estimates of the strain rate and the stress in-norm,and the pressure in L^(2)-norm are optimal under certain ***,several numerical examples are given to show the performance of the augmented MDG method and verify the theoretical *** evidence is provided to show that the orders of convergence are sharp.

关键词： Quasi-Newtonian fows Mixed discontinuous Galerkin method Symmetric strain rate Symmetric stress Optimal convergence orders

来源：评论

学校读者我要写书评

暂无评论

Experimental study on the thermochemical reduction of supercritical CO2by guaiacol 8

Experimental study on the thermochemical reduction of superc...

引用

8th International Conference on Smart and Sustainable Technologies, SpliTech 2023

作者： Wei, Yimeng Kuanibieke, Jiadela Jin, Hui Xi'an Jiaotong University State Key Laboratory of Multiphase Flow in Power Engineering China

ISBN: (纸本)9789532901283

The continuous growth of CO2 emissions is one of the global problems facing humanity, and how to convert and exploit the stock of CO2 has become an urgent issue. Biomass as an activity of CO2 thermal reduction medium has become the focus of human attention in general. Supercritical CO2 (SCCO2) has the advantages of near-liquid density and high solubility, which can further strengthen the reduction process (T≥31.26, P≥72.9 atm). This paper described a SCCO2 reduction method of guaiacol on an intermittent Kettle Reactor to investigate the effects of reaction temperature (400-700), residence time (5-20 min) and reactant concentration (4 wt%-16wt%) on the three-phase products. The experimental results indicated that the carbon gasification efficiency (CE) and hydrogen gasification efficiency (HE) were 43.7% and 56.7%, respectively, when the carbon dioxide consumption reached 16.15 mol/kg. As the temperature increased, the consumption of carbon dioxide increased and the concentration of reactants increased with opposite results. © 2023 University of Split, FESB.

关键词： Carbon dioxide

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：