检索结果-内蒙古大学图书馆

9th International Conference on Modeling and Diagnostics for Advanved Engine Systems, COMODIA 2017

作者： Zhang, M. Patyal, A. Fogla, N. Wang, J.H. Huang, Z.H. Matalon, M. State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China Department of Mechanical Science and Engineering University of Illinois at Urbana-Champaign UrbanaIL61801 United States

The effect of varying turbulence intensities on the flame brush thickness is investigated numerically using a hybrid Navier-Stokes/front-tracking methodology in the context of the hydrodynamic theory. Two configurations, namely planar and Bunsen, are chosen with the latter used for direct comparison with experimental OH-PLIF Bunsen flame images. The Darrieus-Landau influences are controlled through the mixture Markstein length and the flame brush is analyzed under two regimes, sub- and supercritical based on the absence/presence of the hydrodynamic instability. In the planar configuration at low intensities, the sub-critical flame brush retains its near flat shape, while the super-critical flame brush forms a highly corrugated structure reminiscent of the cusped-like flames that result in the laminar setting. With increasing turbulence levels, these effects start to gradually diminish as the flame becomes dominated by velocity fluctuations arising from the turbulent field, finally leading to nearly identical behavior in both regimes for very high intensities. Unlike the planar flame, the sub-critical Bunsen flame surface is dominated by large wrinkles with a more rounded shape while the super-critical flame highlights the formation of cusp-like structures on its surface. Numerical verification of the Bunsen flame brush thickness shows a good qualitative match with experimental tests for turbulent CH4/air flames. The good agreement indicates the qualitative prediction capabilities of the hydrodynamic model. Copyright © 2017 by the Japan Society of Mechanical Engineers.

关键词： Navier Stokes equations

来源：评论

学校读者我要写书评

暂无评论

Laser-induced Morphology Change and Photo-thermolysis of Gold Nano Particles with Application in Laser Dermatology

Laser-induced Morphology Change and Photo-thermolysis of Gol...

引用

2017第六届国际新材料大会

作者： Bin Chen State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University China

Based on the principle of selective photothermolysis,laser photothermal therapy is regarded as the most effective treatment methodology for port-wine stain（PWS）,which is a congenital vascular malformation caused by the expansion of capillaries in the dermis.1064 nm Nd:YAG laser has great potential for the treatment of deeper and larger ***,the clinical effectiveness is limited because of the weak absorption of blood to Nd:YAG *** order to enhance the blood absorption,spherical gold nanoparticles were prepared by Sodium citrate reduction method with average size of 16.7 nm and absorbance peak at 522 *** nanorods were prepared by Seeded growth method and modified by PEG with average length and width of 79.1 nm and 13.5 *** this aspect ratio of 5.89,a strong absorption band at050 nm in the near-infrared range is *** can inject spherical gold particles into the bloodstream to enhance the light absorption of blood in visible range,while using gold nanorod to increase absorbance of blood to Nd:YAG Laser for improving the cure rate of laser treatment of vascular *** absorption was increased by 1.25 times for 581 nm（PDL laser） and 3.71 times for 1064 nm（Nd:YAG laser）.To investigate the morphology change and photothermolysis of gold NRs induced by Nd:YAG laser and obtain the optimal irradiation conditions for effectively destroying the vascular lesions,tissue-like phantoms were prepared and exposed to Nd:YAG laser with various laser parameters to investigate the photothermolysis of gold *** obtained the optimal photothermolysis of gold NRs for destroying the blood vessel as follows:When the concentration of gold NRs is 26.67 g/mL,the Nd:YAG laser energy density should be 40 J/cm2,with long laser pulse width of 0.3 ms for ten pulses.

关键词： Laser-induced Morphology Change and Photo-thermolysis of Gold Nano Particles with Application in Laser Dermatology

来源：评论

学校读者我要写书评

暂无评论

Numerical Investigation on the Performance of Different Primary Nozzle Structures in the Supersonic Ejector

引用

Energy Procedia 2017年 105卷 4997-5004页

作者： Kangkang Xue Kaihua Li Weixiong Chen Daotong Chong Junjie Yan State Key Laboratory of Multiphase Flow in Power Engineering Xi’an JiaotongUniversity Xi’an Shaanxi 710049 P.R. China

Computational fluid dynamics (CFD) technique is employed to investigate the effect of primary nozzle structures on the supersonic ejector performance. The performance of the supersonic ejectors with three different nozzle structures, including conical nozzle, petalage nozzle and crenation nozzle, have been compared under the same conditions. Compared with the ejector equipped with the conical nozzle, the entrainment ratio of petalage nozzle is slightly smaller, while the critical back pressure increases by 5.2%. Just the opposite, the entrainment ratio of crenation nozzle is slightly higher, and the critical back pressure would decrease by 2.1%. In addition, the effects of primary/induced fluid pressure on the flow field (pressure and Mach number along the ejector centerline) are observed and analyzed to explain the mixing process occurring inside the ejector. It finds out that the shape of the mixing layer in the supersonic ejector with different nozzles is different.

关键词： Supersonic ejector CFD Primary nozzle Entrainment ratio Critical back pressure

来源：评论

学校读者我要写书评

暂无评论

Optimization design of flue gas temperature for Low-Low Temperature Electrostatic Precipitator

引用

Journal of Physics: Conference Series 2019年第1期1300卷

作者： Ke Sun Yu Yan Jiahao Jiang Lei Deng State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power Engineering Xi'an Jiaotong University Xi'an 710049 China Huadian Electric Power Research Institute Co. LTD. Hangzhou 310030 China

Low temperature corrosion is one of the key issues in application of low-low temperature electrostatic precipitator. The concentration of SO3 affects the acid dew point temperature of flue gas. The exhaust temperature after the air preheater should be higher than the acid dew point temperature. The residual heat of flue gas is fully utilized by the low-temperature economizer. The efficiency of low-low temperature electrostatic precipitator is improved by the comprehensive effect of the condensation of SO3 on the surface of the fine particles, the decrease of the specific resistance of the particles and the agglomeration of the fine particles.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Experimental Study on Cohesiveness Characteristics of Raw Cement Ash at Moderate Temperature

引用

Energy Procedia 2017年 105卷 4674-4679页

作者： Tao Han Chang’an Wang Qi Cao Wufeng Chen Defu Che State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power Engineering Xi’an Jiaotong University Xi’an 710049 China

Raw cement ash deposition in SP boilers gives rise to serious operation problems. In the present, mechanism of raw cement ash deposition is still unclear because the ash components, gas atmosphere and gas temperature are quite different from existing studies. The characteristics of cohesiveness of raw cement ash in moderate temperature were investigated in a lab-scale electric furnace. Three typical raw cement ashes were selected as samples, three base plates, including rough steel plate, smooth steel plate, organic glass plate were studied. Ball-impacting method was adopted to evaluate the cohesiveness of ash. Experimental results show that, the ash cohesiveness is mainly dependent on the components of ash, and the material property of base plate, while it exhibits little relationship with the roughness of the plate surface. Low-melting substances appear during ash deposition on steel plate. The results reveal that ferrum possibly has catalytic to some low-melting substances forming.

关键词： deposition cohesiveness roughness low-melting sunbstances

来源：评论

学校读者我要写书评

暂无评论

Optimization of the fuel rod＇s arrangement cooled by turbulentnanofluids flow in pressurized water reactor (PWR)

引用

Chinese Journal of Chemical Engineering 2017年第6期25卷 722-731页

作者： M. Hatami MJ.Z. Ganfi I. Sohrabiasl D. Jing International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power Engineering Xi'anJiaotong University Xi'an 710049 China Department of Mechanical Engineering Esfarayen University of Technology Esfarayen North Khorasan lran Department of Renewable Energies Engineering Faculty of New Sdences & Technologies University of Tehran Tehran lran Department of Mechanical Engineering Babol University of Technology Babol lran

In this paper, response surface methodology(RSM) based on central composite design(CCD) is applied to obtain an optimization design for the fuel rod's diameter and distance cooled by turbulent Al_2O_3–water nanofluid for a typical pressurized water reactor(PWR). Fuel rods and nanofluid flow between them are simulated 3D using computational fluid dynamics(CFD) by ANSYS-FLUNET package software. The RNG k–ε model is used to simulate turbulent nanofluid flow between the rods. The effect of different nanoparticles concentration is also investigated on the Nusselt number from heat transfer efficiency view point. Results reveal that when distance parameter(a) is in the minimum level and diameter parameter(r) is in the maximum possible level, cooling the rods will be better due to higher Nusselt number in this situation. Also, using the different nanoparticles on the cooling process confirms that Al_2O_3 averagely 17% and TiO_2 10% improve the Nusselt numbers.

关键词： Optimization Fuel rods Nanofluid Pressurized water reactor

来源：评论

学校读者我要写书评

暂无评论

Ash Deposition and Alkali Metal Migration during Zhundong High-alkali Coal Gasification

引用

Energy Procedia 2017年 105卷 1350-1355页

作者： Guangyu Li Chang’an Wang Pengqian Wang Yongbo Du Xuan Liu Wufeng Chen Defu Che State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power Engineering Xi’an Jiaotong University Xi’an 710049 China

Ash deposition is particularly serious during Zhundong coal combustion/gasification due to its high alkali metal content, which causes great troubles and limits its utilization. This paper focuses on the ash deposition characteristics and migration disciplinarian of akali metal during Zhundong coal gasification varing with different conditions, such as ash deposition temperature, gasification temperature, O 2 /coal, steam/coal, and deposition time. Experimental result indicates that gasification conditions play a significant role on ash deposition. The root cause of severe fouling is the high content of Na in Zhundong coal, most of which is water-soluble. Besides, the contents of Na, Fe, S, Cl in ash are obviously changed with flue gas temperature increasing, indicating these elements have great influence on ash deposition, and the migration of Na, Fe and Cl presents similar variation during deposition. In addition, Na deposits mainly above 873 K, and Fe gains enrichment in ash at various temperatures. With the increase of gasification temperature, the content of Na in the ash is increased, which could exacerbate ash deposition. Both O 2 /coal and steam/coal have a certain influence on migration of elements, and the increases of O 2 /coal and steam/coal can relieve the ash fouling phenomena. Deposited ash on heating surface will react with Na in flue gas at high temperature, leading to the increase of content of Na in the ash with deposition time increasing.

关键词： Coal gasification Zhundong coal alkali metal ash Deposition

来源：评论

学校读者我要写书评

暂无评论

Release and Transformation of Potassium during Combustion of Biomass

引用

Energy Procedia 2017年 142卷 401-406页

作者： Lei Deng Jiaming Ye Xi Jin Tao Zhu Defu Che State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power Engineering Xi’an Jiaotong University Xi’an 710049 China

To investigate the release and transformation of fuel K during combustion of biomass, wheat straw and corn stalk are burnt in a fixed-bed reactor system during 400−1000 °C, and weight measurement, elemental composition analysis, and chemical fractionation analysis are performed. The influences of fuel type, combustion temperature, and water washing pretreatment are discussed. The results show that wheat straw has a higher K release ratio than corn stalk, especially when combustion temperature is above 500 °C. For both biomass fuels, the released K is far less than the water-soluble K. For wheat straw, some of the other occurrence modes of K turn into the insoluble K gradually. For corn stalk, the water-soluble and ion-exchangeable K turn into HCl-soluble and insoluble K. Water washing removes all the water-soluble K of corn stalk and reduces the K release from 3.26 to 0.27 mg g -1 at 1000 °C.

关键词： Potassium release Transformation Biomass combustion Water washing

来源：评论

学校读者我要写书评

暂无评论

Ferrites boosting photocatalytic hydrogen evolution over graphitic carbon nitride: a case study of(Co, Ni)Fe_2O_4 modification

引用

Science Bulletin 2016年第4期61卷 292-301页

作者： Jie Chen Daming Zhao Zhidan Diao Miao Wang Shaohua Shen International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University

The charge cartier separation and surface catalytic redox reactions are of primary importance as elementary steps in photocatalytic hydrogen evolution. In this study, both of these two processes in photocatalytic hydrogen evolution over graphitic carbon nitride （g-C3N4） were greatly promoted with the earth-abundant ferrites （Co, Ni）Fe2O4 modification. CoFe2O4 was further demonstrated to be a better modifier for g-C3N4 as compared to NiFe2O4, due to the more efficient charge carrier transfer as well as superior surface oxidative catalytic activity. When together loading CoFe2O4 and reductive hydrogen production electrocatalyst Pt onto g-C3N4, the obtained Pt/g-C3N4/CoFe2O4 photocatalyst achieved visible-light （2 〉 420 nm） hydrogen production rate 3.5 times as high as Pt/g-C3N4, with the apparent quantum yield reaching 3.35 % at 420 nm.

关键词： Graphitic carbon nitride FerritesPhotocatalytic water splitting Solar hydrogenconversion

来源：评论

学校读者我要写书评

暂无评论

Computational fluid dynamics simulation of hydrodynamics in the riser of an external loop airlift reactor

引用

Particuology 2016年第4期14卷 95-101页

作者： Xuedong Jiang Ning Yang Bolun Yang Department of Chemical Engineering State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an 710049 China Center for Mesoscience and State Key Laboratory of Multiphase Complex Systems Institute of Process Engineering Chinese Academy of Sciences Beijing 100190 China

Local hydrodynamics in the riser of an external loop airlift reactor （EL-ALR） are identified and the performances of three drag models are evaluated in computational fluid dynamics simulation. The simulation results show that the Schiller-Naumann drag model underestimated the local gas holdup at lower superficial gas velocity whereas the Tomiyama drag model overestimated that at higher superficial gas velocity. By contrast, the dual-bubble-size （DBS）-local drag model gave more reasonable radial and axial distri-butions of gas holdup in all cases. The reason is that the DBS-local drag model gave correct values of the lumped parameter, i,e., the ratio of the drag coefficient to bubble diameter, for varying operating conditions and radial positions. This ratio is reasonably expected to decrease with increasing superficial gas velocity and be smaller in the center and larger near the wall. Only the DBS-local drag model correctly reproduced these trends. The radial profiles of the axial velocity of the liquid and gas predicted by the DBS-local model also agreed well with experimental data.

关键词： Computational fluid dynamics External loop airlift reactor Drag model Gas holdup Mnltiscale Mesoscale

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：