检索结果-内蒙古大学图书馆

The Fifth China-Korea Workshop on Nuclear Reactor Thermal Hydraulics

作者： Liang zhao Guanghui Su Suizheng Qiu Wenxi Tian Zhangli Wang Department of Nuclear Science and Technology State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University

In an integral pressurized water reactor(IPWR), the primary coolant system components and the loop system equipment are housed in the reactor pressure vessel, and the pipe lines connecting between those components are eliminated because of the requirement of compact layout in-vessel. The compactness and inherent safety of the system are enhanced with the concise structure. Thus, this design scheme is suitable for the medium or small size nuclear power plants or ships nuclear systems in the economic and technological aspects. According to the thermal- hydraulic characteristics of the IPWR,a reasonable description of the system mathematical and physical model is established, including core model, simplified pump model, once-through steam generator (OTSG) model, flow friction and heat transfer models. Meanwhile, all possible flow and heat transfer conditions are considered and the corresponding optional models are presented. In addition, the Gear method is used for the numerical solution of transient equations. The full pressure startup method is simulated with this model. Because of the adoption of modular programming techniques, both of the steady and transient state analysis codes can be applied easily to other thermal-hydraulic analysis of special reactors and special cases by modifying and updating the corresponding function modules.

关键词： Analysis Of Thermal-Hydraulic Performance During Full Pressure Startup Scheme Of IPWR

来源：评论

学校读者我要写书评

暂无评论

Thermal hydraulics investigations in different fuel packing model of Pebble Bed Water cooled Reactor

Thermal hydraulics investigations in different fuel packing ...

引用

The Fifth China-Korea Workshop on Nuclear Reactor Thermal Hydraulics

作者： Hua Li Suizheng Qiu Guanghui Su Wenxi Tian Youjia Zhang Department of Nuclear Science and Technology State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University

A pebble bed water cooled reactor (PBWR) is one of the renewed reactor designs in nuclear power generation. It is currently under consideration and development worldwide in the conceptual design of high temperature gas-cooled reactor and supercritical water-cooled reactor. In this study, the different geometrical models of the PBWR were built in which the thermal- hydraulic characteristics of the coolant were analyzed and compared. The results indicate that with the same physical parameters and boundary conditions, the packing form of body-centered cubic is the best choice to the actual case.

关键词： CFD Thermal hydraulics investigations in different fuel packing model of Pebble Bed Water cooled Reactor

来源：评论

学校读者我要写书评

暂无评论

Development of RETAC for AP1000 Thermal-hydraulic Characteristics and Safety Analysis on PRHRS Inadvertent Operation Accident

Development of RETAC for AP1000 Thermal-hydraulic Characteri...

引用

The Fifth China-Korea Workshop on Nuclear Reactor Thermal Hydraulics

作者： W.W.Wang G.H.Su W.X.Tian S.Z.Qiu State Key laboratory of Multiphase Flow in Power Engineering Department of Nuclear Science and Technology Xi'an Jiaotong University

In the present study, a thermal-hydraulic safety analysis code for AP1000 named RETAC (REactor Transient Analysis Code) has been developed using FORTRAN 90 language. A point reactor neutron kinetics model with six groups of delayed neutrons was adopted to describe the core thermal power transient. A distribute parameter model with two-phase drift flux model was used in the U-tube steam generator simulation. In the pressurizer simulation, a multi-region non-equilibrium model was adopted. Similar to current large commercial codes such as RELAP5 and RETRAN series, the four-quadrant analogy curves were used for the solution of the transient behaviors of the main coolant pumps. In this paper, a new and reasonable model for the passive residual heat removal heat exchanger (PRHR HX) was proposed based on basic equations of mass, momentum and energy. Gear method and Adams predictor-corrector method were adopted alternately for a better solution to ill-condition differential equations corresponding to detail processes. The PRHR HX inadvertent operation accident was chosen in the transient accident analysis. Furthermore, the simulation results obtained by RETAC were compared with that by Westinghouse-developed LOFTRAN code. The comparison results showed a good agreement and thus proved the accuracy and reliability of the RETAC code. With the adoption of modular programming techniques, the RETAC code can be easily modified and applied to higher power passive safety reactors in the future.

关键词： RELAP Development of RETAC for AP1000 Thermal-hydraulic Characteristics and Safety Analysis on PRHRS Inadvertent Operation Accident

来源：评论

学校读者我要写书评

暂无评论

Design and Transient Analyses of Passive Emergency Feedwater System of CPR1000. Part I: Air Cooling Condition

Design and Transient Analyses of Passive Emergency Feedwater...

引用

The Fifth China-Korea Workshop on Nuclear Reactor Thermal Hydraulics

作者： Ya-Pei Zhang Sui-Zheng Qiu Guang-Hui Su Wen-Xi Tian State Key Laboratory of Multiphase Flow in Power Engineering Department of Nuclear Science and Technology Xi'an Jiaotong University

The steam generator secondary passive emergency feedwater system is a new design for traditional generation II + reactor CPR1000. The passive emergency feedwater system is designed to supply water to the SG shell side and improve the safety and reliability of CPR1000 by completely or partially replacing traditional emergency water cooling system in the event of the feed line break (FLB) or loss of heat sink accident. The passive emergency feedwater system consists of steam generator (SG), heat exchanger (HX), air cooling tower, emergency makeup tank (EMT), and corresponding pipes and valves for air cooling condition. In order to improve the safety and reliability of CPR1000, the model of the primary loop system and the passive emergency feedwater system was developed to investigate residual heat removal capability of the passive emergency feedwater system and the transient characteristics of the primary loop system affected by the passive emergency feedwater system using RELAP5/MOD3.4. The transient characteristics of the primary loop system and the passive emergency feedwater system were calculated in the event of feed line break accident. Sensitivity studies of the passive emergency feedwater system were also conducted to investigate the response of the primary loop and the passive emergency feedwater system on the main parameters of the passive emergency feedwater system. The passive emergency feedwater system could supply water to the SG shell side from the EMT successfully. The calculation results showed that the passive emergency feedwater system could take away the decay heat from the primary loop effectively for air cooling condition, and that the single-phase and two-phase natural circulations were established in the primary loop and passive emergency feedwater system loop, respectively.

关键词： Part I Design and Transient Analyses of Passive Emergency Feedwater System of CPR1000 Air Cooling Condition CPR

来源：评论

学校读者我要写书评

暂无评论

Decalin dehydrogenation on active carbon supported Pt-Ni bimetallic catalysts

Decalin dehydrogenation on active carbon supported Pt-Ni bim...

引用

2011 2nd International Conference on Mechanic Automation and Control engineering, MACE 2011

作者： Hu, Lei Ling Wu, Weitao Qi, Suitao Yi, Chunhai Zhu, Gangli Yang, Bolun Department of Chemical Engineering State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an 710049 China

ISBN: (纸本)9781424494392

Pt-Ni bimetallic catalysts and their corresponding monometallic catalysts supported on active carbon were prepared by incipient wetness impregnation or chelating formaldehyde reduction. The effect of feed/catalyst ratio and the metal impregnation sequence for active carbon supported bimetallic nanoparticle on dehydrogenation activity of decalin was investigated. The results showed that the conversion of decalin increased up to 72% over 3%Pt/C catalyst when the feed/catalyst ratio reached 3.3 mL/g, under which condition the catalyst was in the liquid film state, having a higher temperature and larger contact area. The Pt-Ni/C bimetallic catalyst showed higher activity than either Pt/C or Ni/C monometallic catalyst. The impregnation sequence has a significant effect on the catalytic performance of three bimetallic supported catalysts. Pt first catalyst displayed the best dehydrogenation activity and selectivity to naphthalene. It reveals that the impregnation sequence more likely altered the location of active metal species and the formation of Pt-Ni bimetallic bond, which lead to the different catalytic behavior for decalin dehydrogenation. © 2011 IEEE.

关键词： Dehydrogenation

来源：评论

学校读者我要写书评

暂无评论

Surface Modification of α-Fe 2 O 3 Nanorod Array Photoanodes for Improved Light-Induced Water Splitting

引用

MRS Online Proceedings Library 2011年第1期1326卷 1-6页

作者： Shaohua Shen Coleman X. Kronawitter Jiangang Jiang Liejin Guo Samuel S. Mao State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an Shaanxi China Environmental Energy Technologies Division Lawrence Berkeley National Laboratory Berkeley USA

α-Fe2O3 nanorod arrays were fabricated by a low-temperature aqueous chemical growth (ACG) technique and followed by an annealing process. For the surface doping of α-Fe2O3 nanorods, β-FeOOH nanorods obtained via ACG were coated with a thin layer of Cr3+ precursor solution by spin coating, and then underwent the annealing treatment in air. Conducting polymer polypyrrole (PPy) decorated α-Fe2O3 nanorods were prepared by electrodeposition method using malic acid contained pyrrole aqueous solution. Primary results showed that the photocurrents of α-Fe2O3 nanorod array photoanodes were greatly enhanced by surface doping of Cr3+, as well as PPy decoration. This might be due to the retarded charge recombination and promoted surface reaction rate of photogenerated holes with water. Further investigation on surface modification of α-Fe2O3 nanorod array photoanodes is currently conducted in our group.

关键词： dopant energy generation nanostructure

来源：评论

学校读者我要写书评

暂无评论

Study of the Effective Influence Distance of Longitudinal Vortex in Narrow Rectangular Channel

Study of the Effective Influence Distance of Longitudinal Vo...

引用

International Conference on Computer Distributed Control and Intelligent Environmental Monitoring (CDCIEM)

作者： Jun Huang Yan-Ping Huang Jian Ma Qiu-Wang Wang Key Laboratory of Bubble Physics Natural Circulation Nuclear Power Institute of China Chengdu China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an China

The heat transfer enhancement of Longitudinal Vortex (LV) is a kind of technology with efficiency is high and resistance is low. The effective influence distance of LV is very important to extend this kind of technology in narrow rectangular channels under water medium. CFX10.0 is used to simulate this question, and three velocity components of water flow have been used to define the strength of LV. The results of this calculate method are compared with the experimental results of thermal infrared imager and phase doppler particle analyzer, and they are reasonable. In this paper range, the effective influence distance of LV is bigger than 33 times of Longitudinal Vortex Generators (LVGs) height.

关键词： Monitoring Computers Distributed control

来源：评论

学校读者我要写书评

暂无评论

Comparative Study on Combustion Performance of Petroleum Coke, Hejin Coal and Shenmu Coal

引用

Journal of Energy and power engineering 2011年第2期5卷 135-141页

作者： W.Y. Dou Q.L. Zhou Y.H. Li T.M. Xu S.E. Hui China Special Equipment Inspection and Research Institute Beoing 100013 China State Key Laboratory of Multiphase Flow in Power Engineering Xi＇an Jiaotong University Xi＇an 710049 China

The effects of three factors on combustion performance of petroleum coke, Herin Coal and Shenmu Coal have been studied, including the ratio of primary air, excess air factor, and the swirling intensity of outer secondary air. The experiments were carried out on a one-dimensional furnace with dual channel swirling burner, in which temperature of center furnace, emission of air pollutants, and burn-out rate of fuel were measured. The results provide the optimal ratio of primary air, excess air factor and swirling intensity of outer secondary air for the fuels. The combustion performance of petroleum coke B is much better than petroleum coke A, but worse than Hejin coal and Shenmu coal. In addition, the burn-out rate of petroleum coke depends much more on the temperature in terminal stage of combustion than in the early stage of combustion.

关键词： Combustion performance petroleum coke Hejin coal Shenmu coal comparative study

来源：评论

学校读者我要写书评

暂无评论

Supersonic Ejector to Boost Production from Low Pressure Natural Gas Field

Supersonic Ejector to Boost Production from Low Pressure Nat...

引用

International Conference on Computer Distributed Control and Intelligent Environmental Monitoring (CDCIEM)

作者： Gesheng Wu Daotong Chong Weixiong Chen Junjie Yan State Key Laboratory of Oil & Gas Reservoir Geology and Exploitation Southwest Petroleum University Chendu China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an China

An effective way to boost natural gas production from low pressure gas field was introduced in the paper. The supersonic ejector used the energy of high pressure gas wells, which was generally wasted through the choke valve, as its power supply to boost the low pressure gas production. The field experiment of the natural gas ejector was carried out, and the performance of the ejector was also presented. Moreover, the production of low pressure natural gas well was compared when the natural gas ejector was used or not. The economic analysis shows that the recovery period of the capital was less than several months.

关键词： Monitoring Computers Distributed control

来源：评论

学校读者我要写书评

暂无评论

Comparison study on the thermal impact of two types of laying technologies with double pipelines in one ditch

引用

Kung Cheng Je Wu Li Hsueh Pao/Journal of engineering Thermophysics 2011年第5期32卷 787-790页

作者： Wang, Qian-Kun Yu, Bo Sun, Chang-Zheng Zhang, Zheng-Wei Zhang, Jin-Jun Wei, Jin-Jia Beijing 102249 China PetroChina West East Gas Pipeline Company Zhejiang Department Hangzhou 310008 China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an 710049 China

There are two types of laying technologies of two pipelines in one ditch: laying two oil pipelines in one ditch and laying an oil pipeline with a gas pipeline in one ditch. Because of the Joule Thomson effect and the differences of the pipeline diameter, the thermal impact of these two different types of laying technologies may be different. An unstructured-finite-volume numerical method was used to study the differences of the thermal impact between these two different types of laying technologies.

关键词： Thermoanalysis

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：